A Photo-ElectroChemical DrOplet Cell (PEC-DOC) has been developed for the I07 surface diffraction beamline of Diamond Light Source to investigate solid-liquid interfaces using Surface X-Ray Diffraction (SXRD). PEC-DOC is ultrahigh vacuum (UHV) compatible, and so can be directly attached to a UHV instrument, such as that available in the Surface and Interface Laboratory at Diamond Light Source. Hence, samples can be prepared using standard surface preparation methods, such as sputtering/annealing, and then be characterised using X-ray photoemission spectroscopy (XPS) and scanning tunnelling microscopy (STM). Subsequently, a sample can be transferred in UHV in PEC-DOC to I07, where the structure of the solid-liquid interface can be investigated.

Material properties frequently relate to structures at or near surfaces, particularly in thin films. As a result, it is essential to understand these structures at the molecular and atomistic levels. The most accurate and widely used techniques for characterizing crystallographic order are based on X-ray diffraction. When dealing with thin films or interfaces, standard approaches, such as single crystal or powder diffraction, are not suitable. However, X-ray diffraction under grazing incidence conditions can provide the required information. In this Primer, grazing incidence X-ray diffraction (GIXD) is comprehensively introduced, starting from basic considerations on X-ray diffraction at crystals with reduced dimensionality and the optical properties of X-rays, followed by a more in-depth description of an experimental performance, including X-ray sources, goniometers and detectors. Experimental errors, limitations and reproducibility are discussed. Various applications, from highly ordered inorganic single crystal surfaces to weakly ordered polymer thin films, are presented to illustrate the potential of GIXD. Data visualizations, representations and evaluation strategies are summarized, based on the example of anthracene thin films. The Primer compiles information relevant to perform high-quality GIXD experiments, evaluate data and interpret results, to extend knowledge about X-ray diffraction from surfaces, interfaces and thin films. Structures of surfaces and thin films can be investigated by performing X-ray diffraction under grazing incidence conditions. This Primer explores how grazing incidence X-ray diffraction is used to obtain crystallographic information, including in situ characterization, data collection, analysis and visualization, across a range of applications.

Metal-oxide aqueous interfaces are important in areas as varied as photocatalysis and mineral reforming. Crucial to the chemistry at these interfaces is the structure of the electrical double layer formed when anions or cations compensate for the charge arising from adsorbed H+ or OH-. This has proven extremely challenging to determine at the atomic level. In this work, we use a surface science approach, involving atomic level characterization, to determine the structure of pH-dependent model electrified interfaces of TiO2(110) with HCl and NaOH using surface X-ray diffraction (SXRD). A comparison with ab initio molecular dynamics calculations reveals the formation of surprisingly compact double layers. These involve inner-sphere bound Cl and Na ions, with respectively H+ and O-/OH- in the contact layer. Their exceptionally high electric fields will play a key role in determining the chemical reactivity.

A structure determination of the commensurate phase formed by 7,7,8,8-tetracyano-2,3,5,6-tetrafluoroquinodimethane (F(4)TCNQ) absorbed on Ag(111) is reported. Initial characterization was performed using low-energy electron diffraction and synchrotron radiation photoelectron spectroscopy, with quantitative structural data being provided by normal incident X-ray standing waves (NIXSW) and surface X-ray diffraction (SXRD). NIXSW data show the F(4)TCNQ molecule to adopt a "twisted" conformation on the surface, previously found to be associated with metal adatom incorporation into a 2d-metal-organic framework for F(4)TCNQ on Au(111), Ag(100), and Cu(111). SXRD results provide direct evidence of the presence of Ag adatoms that are found to occupy near-bridge or fcc hollow sites with respect to the underlying surface, at an adsorption height of 2.69 +/- 0.10 & Aring;. The results show a consistent pattern of behavior for F(4)TCNQ adsorption on the (111) surfaces of Cu, Ag, and Au.

Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfill ambitions for net-zero carbon dioxide equivalent (CO _2 eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TW _p in 2021 to 8.5 TW _p by 2050 according to the International Renewable Energy Agency, which is considered to be a highly conservative estimate. In 2020, the Henry Royce Institute brought together the UK PV community to discuss the critical technological and infrastructure challenges that need to be overcome to address the vast challenges in accelerating PV deployment. Herein, we examine the key developments in the global community, especially the progress made in the field since this earlier roadmap, bringing together experts primarily from the UK across the breadth of the PVs community. The focus is both on the challenges in improving the efficiency, stability and levelized cost of electricity of current technologies for utility-scale PVs, as well as the fundamental questions in novel technologies that can have a significant impact on emerging markets, such as indoor PVs, space PVs, and agrivoltaics. We discuss challenges in advanced metrology and computational tools, as well as the growing synergies between PVs and solar fuels, and offer a perspective on the environmental sustainability of the PV industry. Through this roadmap, we emphasize promising pathways forward in both the short- and long-term, and for communities working on technologies across a range of maturity levels to learn from each other.

Development of next-generation electrochemical devices, such as solid oxide cells, requires control of the charge transfer processes across key interfaces. Structural strain at electrolyte:electrode interfaces could potentially alter the devices’ charge transport properties, therefore understanding the structural behavior of electrode surfaces under operating conditions is important. The functional oxide single crystal substrate SrLaAlO4 has been well-characterized with bulk structure studies; however, there are very few studies of SrLaAlO4 surface structures. Here, we present an investigation of the surface structure of SrLaAlO4 (001) substrates using surface x-ray diffraction under UHV conditions (10−10 Torr) with the substrate held at either room temperature or 650 °C. Best-fit models using a 1:1 ratio of Sr:La showed significant distortions to the surface AlO6 octahedra.

The effect of lipid composition on models of the inner leaflet of mammalian cell membranes has been investigated. Grazing incidence X-ray diffraction and X-ray and neutron reflectivity have been used to characterize lipid packing and solvation, while electrochemical and infrared spectroscopic methods have been employed to probe phase behavior in an applied electric field. Introducing a small quantity of the anionic lipid dimyristoylphosphatidylserine (DMPS) into bilayers of zwitterionic dimyristoylphosphatidylethanolamine (DMPE) results in a significant change in the bilayer response to an applied field: the tilt of the hydrocarbon chains increases before returning to the original tilt angle on detachment of the bilayer. Equimolar mixtures, with slightly closer chain packing, exhibit a similar but weaker response. The latter also tend to incorporate more solvent during this electrochemical phase transition, at levels similar to those of pure DMPS. Reflectivity measurements reveal greater solvation of lipid layers for DMPS > 30 mol %, matching the greater propensity for DMPS-rich bilayers to incorporate water. Taken together, the data indicate that the range of 10-35 mol % DMPS provides optimum bilayer properties (in flexibility and function as a barrier), which may explain why the DMPS content of cell membranes tends to be found within this range.

: A previous investigation of the structure of TCNQ adsorbed on Ag(111) using normal-incidence X-ray standing waves (NIXSW) and density functional theory (DFT) provided indirect evidence that Ag adatoms must be incorporated into the molecular overlayer. New surface X-ray diffraction (SXRD) results, presented here, provide direct evidence for the presence and location of these Ag adatoms and clearly distinguishes between two alternative models of the adatom registry favored by two different DFT studies.

Photovoltaics (PVs) are a critical technology for curbing growing levels of anthropogenic greenhouse gas emissions, and meeting increases in future demand for low-carbon electricity. In order to fulfil ambitions for net-zero carbon dioxide equivalent (CO2eq) emissions worldwide, the global cumulative capacity of solar PVs must increase by an order of magnitude from 0.9 TWp in 2021 to 8.5 TWp by 2050 according to the International Renewable Energy Agency, which is considered to be a highly conservative estimate. In 2020, the Henry Royce Institute brought together the UK PV community to discuss the critical technological and infrastructure challenges that need to be overcome to address the vast challenges in accelerating PV deployment. Herein, we examine the key developments in the global community, especially the progress made in the field since this earlier roadmap, bringing together experts primarily from the UK across the breadth of the photovoltaics community. The focus is both on the challenges in improving the efficiency, stability and levelized cost of electricity of current technologies for utility-scale PVs, as well as the fundamental questions in novel technologies that can have a significant impact on emerging markets, such as indoor PVs, space PVs, and agrivoltaics. We discuss challenges in advanced metrology and computational tools, as well as the growing synergies between PVs and solar fuels, and offer a perspective on the environmental sustainability of the PV industry. Through this roadmap, we emphasize promising pathways forward in both the short- and long-term, and for communities working on technologies across a range of maturity levels to learn from each other.

We report on the characterization of the growth of vacuum-deposited zinc phthalocyanine (ZnPc) thin films on glass through a combination of in situ grazing incidence x-ray scattering, x-ray reflectivity, and atomic force microscopy. We found that the growth at room temperature proceeds via the formation of two structurally unique substrate-induced interfacial layers, followed by the growth of the gamma-ZnPc polymorph thereafter (thickness approximate to 1.0 nm). As the growth of the bulk gamma-ZnPc progresses, a substantial out-of-plane lattice strain (approximate to 15% relative to gamma-ZnPc powder) is continually relaxed during the thin film growth. The rate of strain relaxation was slowed after a thickness of approximate to 13 nm, corresponding to the transition from layer growth to island growth. The findings reveal the real-time microstructural evolution of ZnPc and highlight the importance of substrate-induced strain on thin film growth.

In June 2021, scientists celebrated the numerous achievements of a unique collaboration between researchers from the UK and Africa and the UK’s national synchrotron, Diamond Light Source [1]. The Synchrotron Techniques for African Research and Technology (START) [2] programme was funded by a 3-year, £3.7 M Global Challenges Research Fund (GCRF) grant provided by the UK Research and Innovation’s Science and Technology Facilities Council (STFC), with the aim of improving researchers’ access to Diamond. The grant’s remit was to fund research posts focusing on two research areas crucial to African sustainable development: energy materials and structural biology. The aim was to align the project with key United Nations Sustainable Development Goals for health (SDG 3), energy (SDG 7), climate (SDG 13), and life-long learning (SDG 4), amongst others. In this article, we report on highlights of the programme and what’s next on the horizon for START.

Sphingolipids are an important class of lipids found in mammalian cell membranes with important structural and signaling roles. They differ from another major group of lipids, the glycerophospholipids, in the connection of their hydrocarbon chains to their headgroups. In this study, a combination of electrochemical and structural methods has been used to elucidate the effect of this difference on sphingolipid behavior in an applied electric field. N-Palmitoyl sphingomyelin forms bilayers of similar coverage and thickness to its close analogue di-palmitoyl phosphatidylcholine. Grazing incidence diffraction data show slightly closer packing and a smaller chain tilt angle from the surface normal. Electrochemical IR results at low charge density show that the difference in tilt angle is retained on deposition to form bilayers. The bilayers respond differently to increasing electric field strength: chain tilt angles increase for both molecules, but sphingomyelin chains remain tilted as field strength is further increased. This behavior is correlated with disruption of the hydrogen-bonding network of small groups of sphingomyelin molecules, which may have significance for the behavior of molecules in lipid rafts in the presence of strong fields induced by ion gradients or asymmetric distribution of charged lipids.

While the phenomenon of metal substrate adatom incorporation into molecular overlayers is generally believed to occur in several systems, the experimental evidence for this relies on the interpretation of scanning tunneling microscopy (STM) images, which can be ambiguous and provides no quantitative structural information. We show that surface X-ray diffraction (SXRD) uniquely provides unambiguous identification of these metal adatoms. We present the results of a detailed structural study of the Au(111)-F4TCNQ system, combining surface characterization by STM, low-energy electron diffraction, and soft X-ray photoelectron spectroscopy with quantitative experimental structural information from normal incidence X-ray standing wave (NIXSW) and SXRD, together with dispersion-corrected density functional theory (DFT) calculations. Excellent agreement is found between the NIXSW data and the DFT calculations regarding the height and conformation of the adsorbed molecule, which has a twisted geometry rather than the previously supposed inverted bowl shape. SXRD measurements provide unequivocal evidence for the presence and location of Au adatoms, while the DFT calculations show this reconstruction to be strongly energetically favored.

Antimony ultrathin films in tensile strain are grown on InAs(111)B substrates and studied in situ using surface X‐ray diffraction. The detailed atomic structures of two highly crystalline Sb(0001) films are derived, with thicknesses of 19 and 4 bilayers. Features considered in structural modeling include interfacial intermixing, surface roughness, individual layer relaxations, and rotational twin domains (RTDs). The four‐bilayer film shows significant structural relaxation in every layer, while both films include RTDs. The results are discussed in relation to the topological properties of low‐dimensional Sb.

We present the electronic and structural properties of monolayer ${\mathrm{WSe}}_{2}$ grown by pulsed-laser deposition on monolayer graphene (MLG) on SiC. The spin splitting in the ${\mathrm{WSe}}_{2}$ valence band at $\overline{\mathrm{K}}$ was ${\mathrm{\ensuremath{\Delta}}}_{\mathrm{SO}}=0.469\ifmmode\pm\else\textpm\fi{}0.008$ eV, as determined by angle-resolved photoemission spectroscopy. Synchrotron-based grazing-incidence in-plane x-ray diffraction (XRD) revealed the in-plane lattice constant of monolayer ${\mathrm{WSe}}_{2}$ to be ${a}_{{\mathrm{WSe}}_{2}}=3.2757\ifmmode\pm\else\textpm\fi{}0.0008$ \AA{}. This indicates a lattice compression of $\ensuremath{-}0.19$% relative to bulk ${\mathrm{WSe}}_{2}$. By using the experimentally determined graphene lattice constant (${a}_{\mathrm{MLG}}=2.4575\ifmmode\pm\else\textpm\fi{}0.0007$ \AA{}), we found that a $3\ifmmode\times\else\texttimes\fi{}3$ unit cell of the slightly compressed ${\mathrm{WSe}}_{2}$ is perfectly commensurate with a $4\ifmmode\times\else\texttimes\fi{}4$ graphene lattice with a mismatch below 0.03%, which could explain why the monolayer ${\mathrm{WSe}}_{2}$ is compressed on MLG. From XRD and first-principles calculations, we conclude that the observed size of strain will affect ${\mathrm{\ensuremath{\Delta}}}_{\mathrm{SO}}$ only on the order of a few meV. In addition, angle-resolved, ultraviolet, and x-ray photoelectron spectroscopies shed light on the band alignment between ${\mathrm{WSe}}_{2}$ and MLG/SiC and indicate electron transfer from graphene to the ${\mathrm{WSe}}_{2}$ monolayer. As further revealed by atomic force microscopy, the ${\mathrm{WSe}}_{2}$ island size depends on the number of carbon layers on top of the SiC substrate. This suggests that the epitaxy of ${\mathrm{WSe}}_{2}$ favors the weak van der Waals interactions with graphene, while it is perturbed by the influence of the SiC substrate and its carbon buffer layer.

The crystallization behaviour of metallic glasses (MGs) has been investigated since the discovery of these important functional materials in order to optimize their synthesis procedures and improve their performances. Methods including powder X-ray diffraction and transmission electron microscopy are usually combined to characterize the crystalline structure in these "amorphous" materials. Until now, these methods, however, have failed to show the crystallization of individual crystals in three dimensions. In this work, in-situ Bragg coherent X-ray diffraction imaging (BCDI) reveals the growth and the strain variation of individual crystals in the Fe-based MGs during annealing. There is preferential growth along the surface of the MG sample particles during the crystal formation and fractal structure formation around the developing crystal surfaces; there is also strain relaxation happening from the inner parts to the surfaces of the developing crystals while cooling. The work leads to propose that during the crystallization of Fe-based MGs, the growth of the individual crystals follows a two-step procedure; and at higher temperature after the first crystallization period of the Fe-based MGs, the crystallization of α-Fe could be a competitive process between the growth of α-Fe crystals and the erosion from other elements.

The real-time morphological evolution of vacuum-deposited a-sexithiophene (a-6T) on a weakly interacting (glass) substrate at ambient temperature is reported. In situ grazing-incidence small-angle X-ray scattering (GISAXS) enabled the observation of nanoscale aggregates, while in situ grazing-incidence wide-angle scattering (GIWAXS) allowed the study of the molecular-scale morphology. The in situ GISAXS measurements revealed that the alpha-6T growth proceeds via a StranskiKrastanov mode, whereby 24 complete monolayers are deposited, followed by subsequent layers formed via island growth. In situ GIWAXS also showed the evolution of the polymorph composition during the thin-film growth. Initially, the disordered beta-phase and the low-temperature (LT)-phase are deposited in nearly equal proportion until a thickness of 8 nm, whereby the LT-phase begins to dominate until a final alpha-6T thickness of 50 nm where the scattering intensity of the LT-phase is more than double that of the beta-phase. The change in the polymorph composition coincided with an increase in the LT-phase d-spacing, indicating a lattice strain relief as the thin film moves from surface to bulk-mediated growth. The GISAXS findings were confirmed through direct imaging using ex situ atomic force microscopy (AFM) at various thicknesses, revealing the existence of both initial the initial and intermediate monolayers and final island morphologies. The findings reveal the real-time morphological evolution of alpha-6T across both the molecular scale and the nanoscale and highlight the role of strain in polymorph growth. Due to the importance of the thin-film microstructure in device performance, it is expected that these results will aid in the development of structureproperty relationships necessary to realize the full potential of organic electronics.

The working electrode of a dye-sensitized solar cell (DSSC) consists of dye molecules adsorbed onto nanoparticles of a semiconductor such as TiO2. A reliable prediction of the DSSC photovoltaic performance of a given dye requires in-depth knowledge about the precise structure of the dye center dot center dot center dot TiO2 interface. X-ray reflectometry (XRR) and grazing-incidence small-angle X-ray scattering (GISAXS) are herein employed to determine the dye center dot center dot center dot TiO2 interfacial structure and associated dye aggregation behavior of three high-performance DSSC dyes, i.e., a metal-free organic dye, MK-2, and the two archetypal ruthenium-based organometallic dyes, N3 and N749 (Black Dye). Results show that all three dyes form nanoaggregates in dye center dot center dot center dot TiO2 interfaces. We determine the dye nanoaggregate separations, sizes, distribution densities, and the extent of short-range order within each dye self-assembly in the longitudinal and lateral directions. Dye center dot center dot center dot TiO2 composites fabricated using dye solutions of varying concentrations are analyzed. We find that nanoaggregates of the three dyes are separated by several hundred nanometers (158-203 nm) in dye center dot center dot center dot TiO2 interfaces that have been fabricated using concentrated dye solutions (0.5 mM or 1.0 mM). MK-2 and N749 dyes also display smaller interparticle separations. Dye nanoparticle diameters are of the order of 156-198 nm, sizes that are comparable to the largest interparticle separations. Thus, no extraneous dye particles can be fitted into gaps between particles, so the dye self-assembly is saturated. Self-assemblies of all three dyes exhibit both lateral and longitudinal short-range order; N3 displays a particularly short coherence length along the TiO2 surface, with extensive structured disorder along the longitudinal direction. The operation of DSSC working electrodes would therefore seem to be dependent on a dye self-assembly that may exhibit several levels of structural granularity and dye aggregation effects.