Metallo-β-lactamases (MBLs) with activity towards a broad-spectrum of β-lactam antibiotics have become a major threat to public health, not least due to their ability to rapidly adapt their substrate preference. In this study, the capability of the MBL AIM-1 to evade antibiotic pressure by introducing specific mutations was probed by two alternative methods, i.e. site-saturation mutagenesis (SSM) of active site residues and in vitro evolution. Both approaches demonstrated that a single mutation in AIM-1 can greatly enhance a pathogen's resistance towards broad spectrum antibiotics without significantly compromising the catalytic efficiency of the enzyme. Importantly, the evolution experiments demonstrated that relevant amino acids are not necessarily in close proximity to the catalytic centre of the enzyme. This observation is a powerful demonstration that MBLs have a diverse array of possibilities to adapt to new selection pressures, avenues that cannot easily be predicted from a crystal structure alone.

In this study, we report two high‐resolution structures of the pyridoxal 5′ phosphate (PLP)‐dependent enzyme kynurenine aminotransferase‐I (KAT‐I). One is the native structure with the cofactor in the PLP form bound to Lys247 with the highest resolution yet available for KAT‐I at 1.28 Å resolution, and the other with the general PLP‐dependent aminotransferase inhibitor, aminooxyacetate (AOAA) covalently bound to the cofactor at 1.54 Å. Only small conformational differences are observed in the vicinity of the aldimine (oxime) linkage with which the PLP forms the Schiff base with Lys247 in the 1.28 Å resolution native structure, in comparison to other native PLP‐bound structures. We also report the inhibition of KAT‐1 by AOAA and aminooxy‐phenylpropionic acid (AOPP), with IC50s of 13.1 and 5.7 μ M , respectively. The crystal structure of the enzyme in complex with the inhibitor AOAA revealed that the cofactor is the PLP form with the external aldimine linkage. The location of this oxime with the PLP, which forms in place of the native internal aldimine linkage of PLP of the native KAT‐I, is away from the position of the native internal aldimine, with the free Lys247 substantially retaining the orientation of the native structure. Tyr101, at the active site, was observed in two conformations in both structures.

Directed evolution is a common tool employed to generate enzymes suitable for industrial use. High thermal stability is often advantageous or even a requirement for biocatalysts, as such the evolution of protein stability is of practical as well as academic interest. Even when evolving enzymes for new or improved catalytic functions, stability is an important factor since it can limit the accumulation rate and number of desired active site mutations. Dienelactone hydrolase, a small monomeric protein, has been previously evolved via a three-stage process to possess enhanced activity and specificity toward non-physiological substrates. In addition to seven active site mutations there were three surface mutations that were thought to increase the stability of the enzyme and compensate for the destabilizing active site mutations. Here, the individual influence of the three surface mutations--Q110L, Y137C and N154D--on the thermal and chemical stability of DLH has been assessed. While the Q110L and N154D mutations improved the thermal stability, the influence of the Y137C mutation was more complex. Individually it was destabilizing both thermally and chemically, but when in the presence of the Q110L and N154D mutations its effect was neutralized in relation to thermal but not chemical stability. In the context of a directed evolution experiment, these compensatory surface mutations play important roles. However, our results show that detrimental mutations can arise, thus the simultaneous monitoring of stability changes while evolving enzymes for enhanced catalytic properties can be beneficial.

The ease with which enzymes can be adapted from their native roles and engineered to function specifically for industrial or commercial applications is crucial to enabling enzyme technology to advance beyond its current state. Directed evolution is a powerful tool for engineering enzymes with improved physical and catalytic properties and can be used to evolve enzymes where lack of structural information may thwart the use of rational design. In this study, we take the versatile and diverse α/β hydrolase fold framework, in the form of dienelactone hydrolase, and evolve it over three unique sequential evolutions with a total of 14 rounds of screening to generate a series of enzyme variants. The native enzyme has a low level of promiscuous activity toward p-nitrophenyl acetate but almost undetectable activity toward larger p-nitrophenyl esters. Using p-nitrophenyl acetate as an evolutionary intermediate, we have generated variants with altered specificity and catalytic activity up to 3 orders of magnitude higher than the native enzyme toward the larger nonphysiological p-nitrophenyl ester substrates. Several variants also possess increased stability resulting from the multidimensional approach to screening. Crystal structure analysis and substrate docking show how the enzyme active site changes over the course of the evolutions as either a direct or an indirect result of mutations.

Gingipains are multi domain peptidases that are primary virulence factors expressed by the keystone periodontal disease pathogen P. gingivalis. The adhesion regions of these proteases are multi-domain complexes that are comprised of a number of modules that belong to the type 1 (T1) family of gingipain adhesins (also known as cleaved adhesin domains). We have to date reported the crystal structures of three homologous variants of these 19 kDa T1 domains and shown that they recognise a number of host target proteins. We have proceeeded to predict from sequence analysis and binding data that in addition to the T1 domains the adhesion regions also contain a number of other structurally (and sequence) unrelated adhesins (referred to here as type 2 or T2 gingpain adhesins) that may synergistically contribute to the virulence of P. gingivalis. We have recombinantly expressed and crystallized the first example of an 17.5 kDA T2 adhesin coded for by a fragment of the gene for the lysine specific gingipain (kgp). We report here the structure refined at 1.05 angstroms resolution and thereby confirm our hypothesis of the existence of the T2 domain family. This structure represents a new fold family which is distantly similar in topology to that of the plastocyanin/azurin family of proteins but with no copper binding sites. Like the T1 adhesins it contains a structural binding site for calcium. We observe that the recombinant T2 adhesin found in the gingipain Kgp also binds directly to host target proteins but more importantly can also competitively inhibit a bacterial invasion cell based assay. The role of this new T2 adhesin in a specific adhesion activity in the cell invasion mechanism is likely a potential critical component in the overall virulence of this pathogen. Figure. Cartoon representation of the superposition of the structures of the Kgp T2 adhesin (green cartoon and blue calcium) and azurin (pink cartoon and gold copper - pdb code 3NP3)

Dienelactone hydrolase (DLH) is a monomeric protein with a simple α/β-hydrolase fold structure. It readily crystallizes in space group P2₁2₁2₁ from either a phosphate or ammonium sulfate precipitation buffer. Here, the structure of DLH at 1.85 Å resolution crystallized in space group C2 with two molecules in the asymmetric unit is reported. When crystallized in space group P2₁2₁2₁ DLH has either phosphates or sulfates bound to the protein in crucial locations, one of which is located in the active site, preventing substrate/inhibitor binding. Another is located on the surface of the enzyme coordinated by side chains from two different molecules. Crystallization in space group C2 from a sodium citrate buffer results in new crystallographic protein-protein interfaces. The protein backbone is highly similar, but new crystal contacts cause changes in side-chain orientations and in loop positioning. In regions not involved in crystal contacts, there is little change in backbone or side-chain configuration. The flexibility of surface loops and the adaptability of side chains are important factors enabling DLH to adapt and form different crystal lattices.

We demonstrate the importance of properly accounting for London dispersion and basis-set-superposition error (BSSE) in quantum-chemical optimizations of protein structures, factors that are often still neglected in contemporary applications. We optimize a portion of an ensemble of conformationally flexible lysozyme structures obtained from highly accurate X-ray crystallography data that serve as a reliable benchmark. We not only analyze root-mean-square deviations from the experimental Cartesian coordinates, but also, for the first time, demonstrate how London dispersion and BSSE influence crystallographic R factors. Our conclusions parallel recent recommendations for the optimization of small gas-phase peptide structures made by some of the present authors: Hartree-Fock theory extended with Grimme's recent dispersion and BSSE corrections (HF-D3-gCP) is superior to popular density functional theory (DFT) approaches. Not only are statistical errors on average lower with HF-D3-gCP, but also the convergence behavior is much better. In particular, we show that the BP86/6-31G* approach should not be relied upon as a black-box method, despite its widespread use, as its success is based on an unpredictable cancellation of errors. Using HF-D3-gCP is technically straightforward, and we therefore encourage users of quantum-chemical methods to adopt this approach in future applications.

The crystal structure of the K1 domain, an adhesin module of the lysine gingipain (Kgp) expressed on the cell surface by the periodontopathic anaerobic bacterium, Porphyromonas gingivalis W83, is compared to the previously determined structures of homologues K2 and K3, all three being representative members of the cleaved adhesin domain family. In the structure of K1, the conformation of the most extensive surface loop is unexpectedly perturbed, perhaps by crystal packing, and is displaced from a previously reported arginine-anchored position observed in K2 and K3. This displacement allows the loop to become free to interact with other proteins; the alternate flipped-out loop conformation is a novel mechanism for interacting with target host proteins, other bacteria, or other gingipain protein domains. Further, the K1 adhesin module, like others, is found to be haemolytic in vitro, and so, functions in erythrocyte recognition thereby contributing to the haemolytic function of Kgp. K1 was also observed to selectively bind to haem-albumin with high affinity, suggesting this domain may be involved in gingipain-mediated haem acquisition from haem-albumin. Therefore, it is most likely that all cleaved adhesin domains of Kgp contribute to the pathogenicity of P. gingivalis in more complex ways than simply mediating bacterial adherence.

The refinement of protein crystal structures currently involves the use of empirical restraints and force fields that are known to work well in many situations but nevertheless yield structural models with some features that are inconsistent with detailed chemical analysis and therefore warrant further improvement. Ab initio electronic structure computational methods have now advanced to the point at which they can deliver reliable results for macromolecules in realistic times using linear-scaling algorithms. The replacement of empirical force fields with ab initio methods in a final refinement stage could allow new structural features to be identified in complex structures, reduce errors and remove computational bias from structural models. In contrast to empirical approaches, ab initio refinements can only be performed on models that obey basic qualitative chemical rules, imposing constraints on the parameter space of existing refinements, and this in turn inhibits the inclusion of unlikely structural features. Here, we focus on methods for determining an appropriate ensemble of initial structural models for an ab initio X-ray refinement, modeling as an example the high-resolution single-crystal X-ray diffraction data reported for the structure of lysozyme (PDB entry “2VB1”). The AMBER force field is used in a Monte Carlo calculation to determine an ensemble of 8 structures that together embody all of the partial atomic occupancies noted in the original refinement, correlating these variations into a set of feasible chemical structures while simultaneously retaining consistency with the X-ray diffraction data. Subsequent analysis of these results strongly suggests that the occupancies in the empirically refined model are inconsistent with protein energetic considerations, thus depicting the 2VB1 structure as a deep-lying minimum in its optimized parameter space that actually embodies chemically unreasonable features. Indeed, density-functional theory calculations for one specific nitrate ion with an occupancy of 62% indicate that water replaces this ion 38% of the time, a result confirmed by subsequent crystallographic analysis. It is foreseeable that any subsequent ab initio refinement of the whole structure would need to locate a globally improved structure involving significant changes to 2VB1 which correct these identified local structural inconsistencies.

ABSTRACT In the context of periodontal disease, cysteine proteinases or gingipains from Porphyromonas gingivalis have been implicated in the hydrolysis of cytokines, including gamma interferon (IFN-γ). This cytokine plays a crucial role in host defenses, in part, by regulating expression of major histocompatibility complex molecules. Our recent analysis has identified three structurally defined modules, K1, K2, and K3, of the hemagglutinin region of the lysine gingipain Kgp. These three structurally homologous domains have a common β-sandwich topology that is similar to that found in a superfamily of adhesins and carbohydrate binding domains. The three Kgp hemagglutinin modules are distinguished by variation in some of the loops projecting from the β-sandwich core. Recombinant products corresponding to both single and multidomain regions as well as native Kgp bound IFN-γ with similar affinities. Among the adhesin domain constructs, only the K1K2 polypeptide inhibited the upregulation of HLA-1 expression in a human erythroleukemia (K562) line induced by both recombinant and native IFN-γ. The K1K2 polypeptide also inhibited HLA-DR expression induced by IFN-γ in human umbilical vein endothelial cells. These effects were competitively inhibited by coincubation with sodium or potassium chloride solution. The N-terminal residues of IFN-γ were implicated in mediating the effect of K1K2, while antibody binding to loop 1 of K2 blocked the action of K1K2. The findings indicate the potential significance of structurally defined Kgp adhesin modules in the inactivation of IFN-γ but also the potential of K1K2 in locating the target for the catalytic domain of Kgp.

SummaryHigh‐molecular‐weight arginine‐ and lysine‐specific (Kgp) gingipains are essential virulence factors expressed by the oral pathogen Porphyromonas gingivalis. Haemagglutinin/adhesin (HA) regions of these proteases have been implicated in targeting catalytic domains to biological substrates and in other adhesive functions. We now report the crystal structure of the K3 adhesin domain/module of Kgp, which folds into the distinct β‐jelly roll sandwich topology previously observed for K2. A conserved structural feature of K3, previously observed in the Kgp K2 module, is the half‐way point anchoring of the surface exposed loops via an arginine residue found in otherwise highly variable sequences. Small‐angle X‐ray scattering data for the recombinant construct K1K2K3 confirmed a structure comprising a tandem repeat of three homologous modules, K1, K2 and K3 while also indicating an unusual ‘y’‐shape arrangement of the modules connected by variable linker sequences. Only the K2 and K3 modules and a K1K2 construct were observed to be potently haemolytic. K2, K3 and the K1K2 construct showed preferential recognition of haem‐albumin over albumin whereas only low affinity binding was detected for K1 and the K1K2K3 construct. The data indicate replication of some biological functions over the three adhesin domains of Kgp while other functions are restricted.

Gingipains, a group of arginine or lysine specific cysteine proteinases (also known as RgpA, RgpB and Kgp), have been recognized as major virulence factors in Porphyromonas gingivalis. This bacterium is one of a handful of pathogens that cause chronic periodontitis. Gingipains are involved in adherence to and colonization of epithelial cells, haemagglutination and haemolysis of erythrocytes, disruption and manipulation of the inflammatory response, and the degradation of host proteins and tissues. RgpA and Kgp are multi-domain proteins composed of catalytic domains and haemagglutinin/adhesin (HA) regions. The structure of the HA regions have previously been defined by a gingipain domain structure hypothesis which is a set of putative domain boundaries derived from the sequences of fragments of these proteins extracted from the cell surface. However, multiple sequence alignments and hidden Markov models predict an alternative domain architecture for the HA regions of gingipains. In this alternate model, two or three repeats of the so-called "cleaved adhesin" domains (and one other undefined domain in some strains) are the modules which constitute the substructure of the HA regions. Recombinant forms of these putative cleaved adhesin domains are indeed stable folded protein modules and recently determined crystal structures support the hypothesis of a modular organisation of the HA region. Based on the observed K2 and K3 structures as well as multiple sequence alignments, it is proposed that all the cleaved adhesin domains in gingipains will share the same β-sandwich jelly roll fold. The new domain model of the structure for gingipains and the haemagglutinin (HagA) proteins of P. gingivalis will guide future functional studies of these virulence factors.

Aspergillus nidulans amine oxidase (ANAO) has the unusual ability among the family of copper and trihydroxyphenylalanine quinone-containing amine oxidases of being able to oxidize the amine side chains of lysine residues in large peptides and proteins. We show here that in common with the related enzyme from the yeast Pichia pastoris, ANAO can promote the cross-linking of tropoelastin and oxidize the lysine residues in α-casein proteins and tropoelastin. The crystal structure of ANAO, the first for a fungal enzyme in this family, has been determined to a resolution of 2.4 Å. The enzyme is a dimer with the archetypal fold of a copper-containing amine oxidase. The active site is the most open of any of those of the structurally characterized enzymes in the family and provides a ready explanation for its lysine oxidase-like activity.

Porphyromonas gingivalis is an obligately anaerobic bacterium recognized as an aetiological agent of adult periodontitis. P. gingivalis produces cysteine proteinases, the gingipains. The crystal structure of a domain within the haemagglutinin region of the lysine gingipain (Kgp) is reported here. The domain was named K2 as it is the second of three homologous structural modules in Kgp. The K2 domain structure is a 'jelly-roll' fold with two anti-parallel beta-sheets. This fold topology is shared with adhesive domains from functionally diverse receptors such as MAM domains, ephrin receptor ligand binding domains and a number of carbohydrate binding modules. Possible functions of K2 were investigated. K2 induced haemolysis of erythrocytes in a dose-dependent manner that was augmented by the blocking of anion transport. Further, cysteine-activated arginine gingipain RgpB, which degrades glycophorin A, sensitized erythrocytes to the haemolytic effect of K2. Cleaved K2, similar to that found in extracted Kgp, lacks the haemolytic activity indicating that autolysis of Kgp may be a staged process which is artificially enhanced by extraction of the protein. The data indicate a functional role for K2 in the integrated capacity conferred by Kgp to enable the porphyrin auxotroph P. gingivalis to capture essential haem from erythrocytes.

Human vascular adhesion protein 1 (VAP-1) is involved in lymphocyte-endothelial cell adhesion and has been implicated in many human inflammatory diseases. VAP-1 is a member of the copper amine oxidase family of enzymes with a trihydroxyphenylalanine quinone (TPQ) cofactor. Previously characterized crystals of VAP-1 suffered from anisotropy and contained disordered regions; in addition, one form was consistently twinned. In an effort to grow crystals that diffracted to higher resolution for inhibitor-binding studies, a construct with an N-terminal deletion was made and expressed in the Chinese hamster ovary (CHO) glycosylation mutant cell line Lec8. Screening produced crystals that displayed some anisotropy and contained seven molecules per asymmetric unit. These crystals belonged to space group C2, with unit-cell parameters a=394.5, b=115.8, c=179.3 Å, β=112.3°. The structure was refined to a resolution of 2.9 Å, with Rcryst and Rfree values of 0.250 and 0.286, respectively.

Copper amine oxidases (CAOs) are ubiquitous in nature and catalyse the oxidative deamination of primary amines to the corresponding aldehydes. Humans have three viable CAO genes (AOC1-3). AOC1 encodes human diamine oxidase (hDAO), which is the frontline enzyme for histamine metabolism. hDAO is unique among CAOs in that it has a distinct substrate preference for diamines. The structure of hDAO in space group P2(1)2(1)2(1) with two molecules in the asymmetric unit has recently been reported. Here, the structure of hDAO refined to 2.1 A resolution in space group C222(1) with one molecule in the asymmetric unit is reported.