In order to evaluate if carbon coated polyethylene terephthalate (C-PET) could favor inflammatory reactions, the expression of interleukin-6 (IL-6) by cultured human umbilical vein endothelial cells was tested in vitro. The cultures were put in contact with C-PET for 1, 24, 48 and 72 h. The same cells cultured on tissue culture-treated polystyrene without biomaterials were tested as the negative control; the same cells incubated with LPS were the positive control. The level of IL-6 in the conditioned medium was tested by enzyme immunoassay; the mRNA expression was evaluated by RT-PCR with specific primers. The cultures incubated with C-PET produced non significantly different amount of IL-6 compared to the negative control and did not induce the expression of IL-6 specific mRNA. LPS induced a significantly higher release of IL-6 in the medium and the expression of mRNA after 24, 48 and 72 h. We conclude that C-PET does not stimulate the synthesis of IL-6 and therefore does not favor inflammatory reaction through the release of this cytokine. © 2001 Kluwer Academic Publishers

Bacterial adhesion to polymethylmethacrylate and to silicon elastomer, materials frequently used in clinical applications, has been investigated to assess whether adhesion selects methicillin-resistant mutants in the bacterial population in contact with the materials. The methicillin susceptibility of a susceptible Staphylococcus aureus (ATCC 25923) was measured by a modification of plate antibiogram Kirby-Bauer method, which allows optimised detection of small variations in antibiotic susceptibility. In both adherent and non-adherent bacterial subpopulations, the presence of mecA gene, which encodes for the protein PBP 2a responsible for methicillin resistance was searched for by Polymerase Chain Reaction (PCR). The contact with the two polymers did not induce in the bacteria population any phenotypic increase in methicillin resistance, or the selection of mutants carrying the mecA gene.

The aim of this research was to evaluate the effect of polyethylene terephthalate (Woven Dacron) on the expression of endothelial integrins. Human umbilical vein endothelial cells were cultured on the material for 24 h. The integrins VLA-2 (α2β1-CD49b/CD29), receptor for laminin and collagen, VLA-5 (α5β1-CD49e/CD29), receptor for fibronectin, VLA-6 (α6β1-CD49f/CD29), receptor for laminin, and αVβ3-CD51/CD61 (receptor for vitronectin) were evaluated by flow cytometry. After contact with polyethylene terephthalate, a slight but significant decrease in the percentage of both CD29 and CD49e positive cells was observed, which suggests a lower number of cells expressing the fibronectin receptor α5β1. Moreover, a significant increase in the mean channel for CD49b and for the vitronectin receptor CD51/CD61 was observed. The reduction in the fibronectin receptor could account for the poor endothelialization observed in vivo on polyethylene terephthalate. The increased expression of the vitronectin receptor, favoring the migration of smooth muscle cells, could give some information about the pathogenesis of intimal hyperplasia, which is a complication of vascular grafts. © 2001 Kluwer Academic Publishers

The amount of fluoride release from dental cements necessary for an anticariogenic effect is nor established; moreover, the possible toxic effects due to high fluoride and aluminum release are not well known and the results are still controversial. The aim of our study was to evaluate fluoride (F) and aluminum (Al) release from dental cements using a 'standardized approach' according to the end-use of the materials, i.e, biocompatibility testing. Two polyacid-modified resin composites of recent application, commonly called compomers (Dyract(R) and Dyract Cem(R)), were compared with two conventional acid-based (Fuji I(TM), Ketac-Cem(R)) and two resin-modified (Vitremer(TM), Vitrebond(TM)) glass-ionomer cements (GICs). All types of cement are used in dentistry and are commercially available. Extracts of the cements into minimum essential medium, after setting over a 1-h (group A) and 1-week (group B) period, were performed. The extraction conditions were rigorously standardized. Mean values +/- standard deviation of F- and Al-levels in such extracts were measured and were expressed as mu g g(-1) (micrograms of ions per gram of cement).A great difference in the amount of ion release, both F and Al, was shown among the tested materials. The GICs, as well as Ketac-Cem(R), released more F and Al than the compomers. All of the materials released the greatest proportion of ions when the extraction was performed in the first hour after mixing (group A). Al- and F-values showed a highly significant positive correlation, independently from the curing time.We conclude that the biological assessment of dental cements can be performed only if a pre-evaluation of the leachables is obtained by applying a standardized protocol which allows a useful comparison between the different materials.

Ten PMMA-based bone cements used in prosthetic surgery have been studied with respect to the induction of programmed cell death (i.e., apoptosis) in HL-60 cells, which are remarkably sensitive to various apoptotic stimuli. Annexin V binding and propidium iodide (PI) exclusion were the methods for detection of early apoptotic changes, while PI entry was considered as a marker of necrosis. Hoechst 33342 staining was used to detect DNA fragmentation and Alamar blue was applied to measure oxide-reduction activity of cells. The production of reactive oxygen species (ROS) related to cell damage was verified using dichlorofluorescein-diacetate (DCFH-DA) oxidation to DCF. Under our experimental conditions, the cements tested, for the most part, were not toxic to leukemic cells at 4 and 24 h. After 24 h, three cements were able to induce cell death, with two eliciting both apoptosis and necrosis, and one cement acting mainly via apoptosis. Both processes of cell death are likely to be mediated by the production of oxygen-free radicals. These findings provide potential leads for investigation into the molecular mechanisms of cell death, which are responsible for tissue damage by cements and intolerance of cemented prostheses.

Clinical isolates of Staphylococcus epidermidis are frequently referred to produce a biofilm, known as slime, involved in adherence to medical devices and in resistance to host defences. A high frequency of slime producing Staphylococcus aureus strains was never reported, at least in the case of human isolates. In the present study the production of slime by clinical isolates of S. aureus and S. epidermidis from catheter associated infections and from post-surgical, infections was studied by a sensitive method based on culturing the isolates on Congo red agar. The study demonstrates that in nosocomial surgical infections, considered separately from catheter-associated infections, S. aureus emerges as a more prevalent etiologic agent than S. epidermidis, with a proportion of slime producing strains markedly high.

Deposition and aggregation of lachrymal proteins on the contact lens surface can promote bacterial adherence. Lysozyme is the major tear protein and is also mainly responsible for the formation of protein deposits on contact lenses. Nonsteroidal anti-inflammatory drugs (NSAID) prevent protein aggregation. The effect of a water-soluble NSAID drug on bacterial adherence to high-water-content/ionic disposable contact lenses was examined in a radiolabeling study. Dose-related inhibition of adherence of Staphylococcus aureus, S. epidermidis, and Pseudomonas aeruginosa on both pretreated lenses and after adding the drug to the medium was investigated. When the drug was added to the media, maximal inhibition of S. aureus adherence was observed in trypticase soy broth (59-98% at the lower and higher drug concentrations, respectively); inhibition progressively decreased in calf aqueous humor (48-75%), lysozyme (34-63%), and saline (12-20%) solutions. Inhibition of adherence varied with the three bacterial species; it was maximal with S. aureus, intermediate with S. epidermidis, and minimal with P. aeruginosa. When lenses were pretreated with the drug, consistent, and even higher, inhibitory effects were observed. The results suggest that water-soluble NSAIDs could be used in preventive treatments for conjunctivae and corneal infections in contact lens wearers, and may provide a clue as to which compounds might inhibit protein interaction and bacterial adhesion.

The mutagenic potential of three commercially available glass–ionomer cements used in dentistry was examined. The cement components were mixed according to the manufacturers indications and set for two defined times: 1 h or, alternatively, 1 wk. Cements B and C set spontaneously; in the case of cement A, the manufacturer suggests the use of a lamp to trigger also a photopolymerization. Photopolymerization, however, was not used. Ames tests were performed on the dimethyl sulphoxide extracts of cements by using Salmonella typhimurium strains TA 98, TA 100, TA 1535, TA 1537, TA 1538 and TA 102. Cement A showed mutagenicity only against TA 1537 strain, either in the presence or absence of metabolic activation with microsomial fraction S9. The other two cements showed no mutagenic potential. We conclude that glass–ionomer cements are, on the whole, safe materials from the viewpoint of genotoxicity, and hypothesize that the mutagenicity observed in cement A could depend on its polymerization performed without light activation. © 1998 Chapman & Hall

The aim of this study was to evaluate endothelin-1 and prostacyclin production by human endothelial cells cultured in the presence of polyethylene terephthalate and collagen-coated PET. Cell counting and the assay of endothelin-1 and 6-keto-prostaglandin F1 alpha, stable metabolite of prostacyclin, were carried out after 48 hour contact of the cells with the examined materials. Endothelial cell contact with uncoated PET caused a significant reduction in cell number, a significant increase in the production of endothelin-1 and a not significant increase in 6-keto-prostaglandin F1 alpha. The endothelial cell contact with collagen-coated PET caused a highly significant decrease in cell number and a not significant decrease in endothelin-1 and 6-keto-prostaglandin F1 alpha. It was concluded that PET causes both a decrease in cell number and a remarkable increase in endothelin-1. On the contrary, collagen-coated PET determines a decrease in cell number and a slight reduction of endothelin-1 and 6-keto-prostaglandin F1 alpha.

BACKGROUND:The aim of the research was the evaluation of plasmatic protein adsorption on untreated polybutylene terephthalate, corona treated polybutylene terephthalate and polyvinylacetate coated corona treated polybutylene terephthalate.METHODS:Total proteins, albumin, immunoglobulins, fibrinogen, insulin and ostecalcin were determined on plasma after contact with these polymers.RESULTS:Unsignificant variations were observed for the assayed proteins.CONCLUSIONS:The conclusions are drawn that the tested materials do not adsorbe significantly the most important plasmatic proteins.

The authors examined the modifications of some markers of platelet activation after contact with biomaterials. Glycoprotein GMP-140 (CD62) was evaluated by flow cytometry; beta-thromboglobulin (beta-TG) and thromboxane B2 (TXB2) were determined by radioimmunoassay. Polyethylene terephthalate (PET) induced a remarkable platelet adhesion and a significant increase in beta-TG and TXB2, with no increase in CD62 on the nonadherent platelets. Pyrolytic carbon-coated PET (PC) did not induce platelet adhesion after 15 min of contact, but a significant increase in CD62 was detected. After 30 min a significant increase in platelet adhesion as well as the release of beta-TG and TXB2 were noted. The increase was lower than that observed for uncoated PET, and after 30 min of contact with PC the increase no longer was observed.

Five commercially available bone cements were analysed by high-performance liquid chromatography for detecting the residual content of an accelerator, the amine N,N-dimethyl-p-toluidine (DMPT), after curing. It was found that the concentration of DMPT in aqueous extracts decreases with time, being almost absent 7 days after curing. Differences were noticed among the cements; residual DMPT is higher in cements prepared with higher content of the amine. It is verified that DMPT's toxic effect on cell cultures is dose-related; a delay in the cell replication cycle is induced in vitro. Damage is reversible, thus justifying the low bone cement toxicity that is clinically ascertained.

The aim of this study is to evaluate the expression of some adhesion molecules on the surface of endothelial cells cultured in contact with knitted Dacron®. These molecules, as mediators of cell adhesion, could play a role in the modulation of adhesion on the biomaterials, therefore conditioning the response of tissues to implant. Twenty different cultures of human umbilical vein endothelial cells (HUVECs) were cultured in contact with knitted Dacron. Both HUVECs grown without the material and HUVECs incubated with endotoxin were used as control. After 24 h, the cell adhesion molecules PECAM-1, ELAM-1, ICAM-1 and VCAM-1 were evaluated on the cells by monoclonal antibodies and flow cytometry. After 24 h of contact with knitted Dacron, a significant decrease in the proportion of cells expressing PECAM-1 was observed, as well as a significant increase in the proportion of cells expressing ELAM-1. The contact with knitted Dacron did not induce significant variations of ICAM-1 and VACM-1. The incubation with endotoxin determined a significant increase in the proportion of ELAM-1-positive cells, a significant increase in ICAM-1 fluorescence intensity, and a significant increase both in fluorescence intensity and in the proportion of VCAM-1-positive cells. The results obtained with the endotoxin are in agreement with those reported in the literature. The ELAM-1 increase, observed after contact with knitted Dacron, could favour leucocyte adhesion, while the decrease in PECAM-1 expression could result from an inhibiting effect on the endothelial cell adhesion so as to hinder the mechanisms involved in the endothelialization of the material. The variations were interpreted as inhibiting endothelialization and favouring the leucocyte adhesion effect by knitted Dacron.

Cell viability and growth for cytotoxicity evaluation of materials for prosthetic devices has been tested using various methods. The aim of this study was to extend the choice of reliable methods to quantify cytotoxicity of materials in vitro. By measuring both viability and growth of cells exposed to biomaterials in vitro, two different parameters are analysed and quantified upon reading of the absorbance of coloured solutions in a spectrophotometer. Neutral red uptake and amido black staining of cells have been used for cell viability and cell number measurement, respectively: they have been found to be well correlated with the number of surviving cells. These methods have been adjusted to a 96-well microplate cell culture system and re-evaluated as simple and reliable methods for the quantitative assessment of biomaterial effect on cells.

The authors have evaluated adhesive protein expression and cytokine production by human umbilical vein endothelial cells cultured in contact with polyethylene terephthalate (PET). ELAM-1, ICAM-1 and VCAM-1 expression was determined by flow cytometry; the concentration of interleukin-1α (IL-1α), interleukin-6 (IL-6), granulocyte colony stimulating factor (G-CSF) and granulocyte-macrophage colony stimulating factor (GM-CSF) in the supernatant was determined by enzyme immunoassay. The contact with PET determined a significant increase in ELAM-1 expression and insignificant increase in cytokine production, demonstrating that PET had a limited capability to stimulate endothelial cells in a pro-inflammatory sense.

In this study the toxic effects of chromium, nickel, and cobalt extracts on in vitro cultured lymphocytes were evaluated. Graphite furnace atomic absorption spectrometry was used to measure the ion concentration. After serial dilution of the extracts, the viability of lymphocytes at 24, 48, and 72 h was estimated by flow cytometry, including propidium iodide staining and light scatter property assessment, and by MTT reduction test. The results of the investigation allowed us to conclude that 1) standardization of the procedure for preparing extracts is fundamental to obtaining repeatability of results; 2) the toxicity of an extract cannot be evaluated with a single viability assay; a combination of functional and structural tests is required; 3) when methods based on enzymatic reactions are performed, e.g. MTT test, it is advisable to replace the extract containing metal ions with fresh medium in order to avoid any interference with viability testing; 4) the amount of Co and Ni in the extract is similar, but the Cr release is very poor; 5) the lower toxicity of Cr extract probably is due to the lower ion concentration; 6) the assessment of 50% cytotoxic concentration (TC50) allows quantification of materials toxicity and comparison of various metals; and 7) the determination of a noncytotoxic concentration, i.e., a concentration lower than TC10, is required for subsequent investigation of cell functions because such studies can be carried out only on viable cell population.

The ability of some biomaterials to activate plasma coagulation system was examined in vitro. After contact of platelet-rich plasma with biomaterials, some markers of the thrombin formation process, i.e., fragment 1 + 2 and fibrinopeptide A, and some inhibitors of the blood coagulation mechanism were tested. Fragment 1 + 2 and fibrinopeptide A were found to be increased by all of the materials, though to a different extent. In particular, fragment 1 + 2 and fibrinopeptide A were significantly increased upon contact with polybutylene terephthalate and with collagen coated polyethylene terephthalate, respectively. Also, antithrombin III was shown to decrease following exposure to biomaterials, but statistical significance was found only for polyethylene terephthalate and polyvinylacetate. As a result of this wide range of variability in the parameters, it is advisable to explore the plasma coagulation system with a multiparametric approach in which thrombin formation and coagulation inhibitors are thoroughly investigated. © 1996 John Wiley & Sons, Inc.

The authors evaluated several immunological parameters in patients with loosened hip arthroplasty in order to determine the state of sensitization with regard to the metallic constituents of the prosthesis. The results obtained by in vivo epicutaneous testing did not reveal a correlation between loosening and sensitization, as the patch test was positive in only 1 out of 16 cases examined. An evaluation of the lymphocyte subpopulation on peripheral blood demonstrated that patients with prostheses in Cr, Co, Mo, Ni alloy present significant lymphopenia, with a reduction in subpopulations CD4 and CD8 and a decrease in in vitro cytotoxic activity. The meaning of these modifications could be interpreted to be either a toxic effect products released from the implant, or as the recruitment of lymphocytes in the site of loosening, due to lymphocyte sequestration phenomena consequent to a cell-mediated hypersensitivity reaction.

This research aims at evaluating the expression of some adhesive proteins on endothelial cell surface after contact with polyethylene terephthalate coated with pyrolytic carbon (PET + PC). Twenty-two different cultures of human umbilical vein endothelial cells (HUVECs) were put in contact with PET + PC. Both HUVECs grown without the biomaterial and HUVECs incubated with endotoxin were used as control. After 24 h, platelet endothelial cell adhesion molecule-1 (PECAM-1), endothelial leucocyte adhesion molecule-1 (ELAM-1), intercellular adhesion molecule-1 (ICAM-1) and vascular cell adhesion molecule-1 (VCAM-1) were evaluated on the cells by monoclonal antibodies and flow cytometry. In agreement with the literature, after 24 h the culture incubated with endotoxin determined a significant increase in the percentage of positive cells for ELAM-1, a significant increase in fluorescence intensity for ICAM-1, and a significant increase in the percentage of positive cells and fluorescence intensity for VCAM-1. After 24 h of culture with PET + PC, no significant variations in the antigens examined were observed. This demonstrates that such material does not activate in vitro the proteins involved in the adhesion between leucocytes and endothelium or in the adhesion between endothelial cells themselves.