Los Congresos Ibero-Latinoamericanos de Seguridad contra Incendios (CILASCI) se celebran cada dos años. Su objetivo es reunir a investigadores y expertos de Portugal, Brasil, España y otros países de América Latina, con el fin de difundir sus trabajos científicos y técnicos en el ámbito de la seguridad contra incendios, integrando a los distintos actores involucrados en esta área del conocimiento. CILASCI 8, en el que se basa este libro, tuvo lugar en la Universidad de Cantabria, en Santander (España), del 8 al 10 de abril de 2026.

The purpose of this study was to examine the differences in the number of basketball court shifts and continuous playing time between age groups and game quarters during competition to optimize team preparation. Data from 28 official games was collected, which were completed in four different age groups: Under-14 (U14), Under-16 (U-16),Under-18 (U-18) and senior level. A total of 61 basketball players participated in this study. Permutation 2x2 ANOVA and post hoc tests were used to test statistical significance (p < .05). Age groups showed significant differences among court shifts, time, and their ratio (shiftsmin-1), with a decreased tendency in all variables from U14 to senior level. Nevertheless, there were no significant differences in the variables studied among game quarters or positive relationships with the point differential. In conclusion, shiftsmin-1 decreases as we progress through the age-groups from U14 to senior basketball. These results could help practitioners to enhance team's preparation by proposing specific 5-on-5 training scenarios based on the most common occurrences as well as the outlying maximal situations. However, the lack of any correlation between the variables studied and game outcome should encourage basketball professionals to assume a holistic approach and explore additional factors to better understand performance.

BACKGROUND:Maximal sprinting speed (MSS) overexposure is associated with increased risk of injury. This study aimed to describe changes in sprint performance-related factors and hamstring strain injury (HSI) risk factors after a high-volume sprinting session in soccer players. HYPOTHESIS:A high-volume sprinting session can induce acute changes in several sprint performance-related factors (sprint time and mechanical properties) and HSI risk factors (posterior chain muscle strength, hamstring range of motion, and dynamic lumbo-pelvic control [LPC], measured as changes in anterior pelvic tilt [APT] during maximal speed sprinting). STUDY DESIGN:Prospective observational case series. LEVEL OF EVIDENCE:Level 4. METHODS:Fifteen active male amateur soccer players participated. Changes in sprint performance-related factors and HSI risk factors were examined for 72 hours after high-volume MSS efforts (H-VMSSE) using a soccer-contextualized multifactorial approach. Muscle damage proxy markers (hamstring perceived soreness and creatine kinase) were also examined. RESULTS:H-VMSSE induced decrements in sprint performance-related factors. Significant reductions in theoretical maximal horizontal velocity (P < 0.01; effect size [ES], -0.71) and performance (P = 0.02; ES, -0.59) were observed for 48 and 72 hours after H-VMSSE. Small but significant reductions in posterior chain muscle force-generating capacity were detected for 48 and 72 hours after H-VMSSE for the nondominant (P < 0.03; ES, -0.60) and dominant (P < 0.04; ES, -0.40) leg. Finally, players exhibited persistent small, albeit nonsignificant (P = 0.06; ES, 0.53), decreases in dynamic LPC (APT increases) for 72 hours after H-VMSSE. CONCLUSION:H-VMSSE induced declines in both sprint performance-related factors and HSI risk factors. Sprinting can alter a player's anatomic structure by increasing APT during the maximum speed phase of the sprint. CLINICAL RELEVANCE:A soccer-contextualized multifactorial approach might allow for the regulation of MSS dosage depending on individual HSI risk factor status, thereby serving as a tailored "vaccine" for sprinting needs.

This study aimed to assess acute and residual changes in sprint-related hamstring injury (HSI) risk factors after a football (soccer) match, focusing on recovery within the commonly observed 72-h timeframe between elite football matches. We used a multifactorial approach within a football context, incorporating optical and ultrastructural microscopic analysis of BFlh (biceps femoris long head) muscle fibres, along with an examination of BFlh fibre composition. Changes in sprint performance-related factors and HSI modifiable risk factors were examined until 3 days after the match (MD +3) in 20 football players. BFlh biopsy specimens were obtained before and at MD +3 in 10 players. The findings indicated that at MD +3, sprint-related performance and HSI risk factors had not fully recovered, with notable increases in localized BFlh fibre disruptions. Interestingly, match load (both external and internal) did not correlate with changes in sprint performance or HSI risk factors nor with BFlh fibre disruption. Furthermore, our study revealed a balanced distribution of ATPase-based fibre types in BFlh, with type-II fibres associated with sprint performance. Overall, the results suggest that a 72-h recovery period may not be adequate for hamstring muscles in terms of both HSI risk factors and BFlh fibre structure following a football match.

The aim of this study was to determine whether a soccer match affects the rapid force-generating capacity of the hamstring muscles, given their key role in both horizontal ground reaction force production during sprint biomechanics, and in the deceleration of the shank during the late swing phase, where rapid force production is essential owing to time constraints. Therefore, the research objective was to determine soccer match-induced hamstrings residual fatigue and recovery through rate of torque development (RTD) and associated biochemical parameters. The recovery kinetics of hamstrings RTD metrics by the 90°hip:20°knee test, together with serum biomarkers (creatine kinase, mitochondrial creatine kinase, transaminases, malondialdehyde, irisin), were assessed in 19 male, regional first-division soccer players (age = 20.9 ± 2.0 years, mass = 72.6 ± 11.9 kg, height = 175.9 ± 6.9 cm [mean ± SD]), before a soccer match (MD) and post-24 h (MD+1), post-48 h (MD+2) and post-72 h (MD+3), through a repeated measures design. Early RTD to 50 ms (p < 0.001, g = −1.24) and 100 ms (p < 0.001, g = −1.06) remained unrecovered on MD+3 in both hamstring muscles. However, maximal voluntary isometric contraction (MVIC) torque of the dominant and non-dominant hamstrings was unrecovered on MD+2 (p = 0.004, g = −0.91; and p = 0.002, g = −0.98, respectively) and recovered on MD+3 (p = 0.057 and p = 0.070, respectively). Further, neuromuscular deficits were coupled with myocyte structural (p = 0.002, g = 1.11) and mitochondrial damage (p = 0.004, g = 0.92) biomarkers. Based in the findings, early RTD0–50 and RTD0–100 monitoring, through the 90°hip:20°knee IPC test, is a cost-effective method for assessing soccer match-induced hamstring muscles residual fatigue and recovery. Overall, soccer match-induced hamstring residual fatigue is not recovered within a 3-day recovery period. Practitioners can use rapid force production metrics through isometric assessments, providing a simple, non-exhaustive tool, for assessing residual fatigue status during congested competitive periods, to comprehensively balance muscle recovery with optimizing training.

Apply of Optimized Pulse Patterns (OPPs) with interior permanent magnet synchronous machines (IPMSM) is receiving significant attention from automotive industry as a mean to improve the efficiency of the traction drives. Traditionally, voltage harmonics or current harmonics have been considered for the optimization process. This paper discusses and compares three different cost functions to be used with IPMSM considering voltage, current, and power harmonic losses. The analysis will consider complexity, accuracy and parameter sensitivity. Current harmonics are first obtained from the voltage harmonics produced by the OPP. Analytical models obtained using the theory of asymmetric circuits will be used for this purpose. The variation of the machine parameters with the injection frequency will be shown to have a great impact on the behavior of the machine losses. A novel cost function considering this machine parameter variation to reduce the harmonic power losses is proposed in this paper. The proposed methodology will be implemented in Matlab. Simulink will be used for the preliminary validation of the analytical results. In addition, FEM is used to assess the accuracy of the analytical results.

Shiga toxin-producing Escherichia coli (STEC) is a zoonotic pathogen that causes gastroenteritis and Hemolytic Uremic Syndrome. Cattle are the main animal reservoir, excreting the bacteria in their feces and contaminating the environment. In addition, meat can be contaminated by releasing the intestinal content during slaughtering. Here, we evaluated the safety and immunogenicity of a vaccine candidate against STEC that was formulated with two chimeric proteins (Chi1 and Chi2), which contain epitopes of the OmpT, Cah and Hes proteins. Thirty pregnant cows in their third trimester of gestation were included and distributed into six groups (n = 5 per group): four groups were administered intramuscularly with three doses of the formulation containing 40 µg or 100 µg of each protein plus the Quil-A or Montanide™ Gel adjuvants, while two control groups were administered with placebos. No local or systemic adverse effects were observed during the study, and hematological parameters and values of blood biochemical indicators were similar among all groups. Furthermore, all vaccine formulations triggered systemic anti-Chi1/Chi2 IgG antibody levels that were significantly higher than the control groups. However, specific IgA levels were generally low and without significant differences among groups. Notably, anti-Chi1/Chi2 IgG antibody levels in the serum of newborn calves fed with colostrum from their immunized dams were significantly higher compared to newborn calves fed with colostrum from control cows, suggesting a passive immunization through colostrum. These results demonstrate that this vaccine is safe and immunogenic when applied to pregnant cows during the third trimester of gestation.

Despite the traditional use of average values for determining physical demands, the intermittent and fluctuating nature of team sports may lead to underestimation of the most demanding scenarios. All the most demanding scenario-related investigations to date only report one maximal scenario per game, the greatest. However, the latest research on this subject has shown additional scenarios of equal or similar magnitude that most researchers have not considered. This repetition concept started a new way of describing competition and training loads; then the study aims were: first, to quantify and assess differences between playing positions in terms of the most demanding scenarios in official matches; and second, to quantify and assess the differences between playing positions in the repetition of different intensity scenarios relative to the most demanding individual scenario. We monitored nine professional rink hockey players (7 exterior and 2 interior players) in 18 competitive matches using an electronic performance tracking system. The interior players are closest to the opponent’s goal, while the exterior players are farthest from it. Peak physical demands variables included total distance (m), distance covered at >18 km·h -1 (m), the number of accelerations (≥2 m∙s -2 , count) and decelerations (≤-2 m∙s -2 , count) in 30 s. An average from the top three individual most demanding scenarios was used to define a reference value to quantify the distribution scenario repetition during matches. The results showed that peak demands in rink hockey are position-dependent, with more distance covered by exterior players and more accelerations performed by interior players. In addition, rink hockey matches include multiple scenario exposures that are close to the peak physical demands of a match. Using the results of this study, coaches can prepare tailored training plans for each position, focusing on distances covered or accelerations for exterior players.

Torque pulsations are a main concern in many applications using permanent magnet synchronous machines. Especially challenging can be the case of Variable Flux machines due to the uncertainty which is intrinsic to the changes of its magnetization state. Accurate knowledge of torque pulsations can be needed for different purposes, including development of control strategies for their mitigation, assessment of their impact on mechanical transmissions and load and machine diagnosis. This paper discusses and compares three different approaches for torque pulsation estimation using 1) flux equation, 2) power equation and 3) magnetic coenergy. The analysis will consider complexity, accuracy and parameter sensitivity for different operating conditions. Magnet temperature will be shown to have a significant impact on the performance of these methods. Online magnet temperature estimation using high frequency signal injection will be used to improve the accuracy of the torque pulsations estimations. The proposed methods are validated by means of FEA.

Introduction: The purpose of this study was to compare the most demanding scenarios (MDS) of match-play across five different team sports of the same club (basketball, futsal, handball, rink hockey and soccer) during five different time epochs (30, 60, 120, 180 and 300 s). Material and methods: Sixty-five professional male players were monitored across 14 to 17 official matches via a local positioning system. Peak physical demands included total distance, distance, and actions > 18 km.h(-1) and distance and number of accelerations and decelerations > 2 m.s(-2). One-way analysis of variance and Tukey post-hoc tests were used to test statistical significance (p <.05), whereas standardized Cohen's effect size and the respective 95% confidence intervals were calculated to detect differences between team sports. Results: While soccer and rink hockey achieved the greatest MDS in total distance, and distance and number of actions > 18 km.h(-1) during all the time epochs examined, basketball presented the highest peak values in number of accelerations and decelerations > 2 m.s(-2) during 30-s and 60-s time epochs. Conclusion: In conclusion, the MDS during competition are significantly different across team sports, which can be useful in determining the upper limit threshold for sport-specific training optimisation and return to play purposes. (C) 2022 FUTBOL CLUB BARCELONA and CONSELL CATALA DE L'ESPORT. Published by Elsevier Espana, S.L.U.

The purpose of this study was to examine the distribution of physical activities relative to the most demanding scenarios across playing positions during official basketball match-play. Twelve professional basketball players were monitored during twelve matches using a local positioning system. Peak physical demands were measured via total distance covered, distance covered >18 km·h-1, and the number of accelerations and decelerations >3 m·s-2 captured over 30- and 60-s rolling averages. The results showed that players were exposed to more than one high-demanding scenario in all variables and time epochs examined. Additionally, total distance covered presented the greatest number of moderate-demanding scenarios (40-80% of most demanding scenarios), whereas distance covered >18 km·h-1, and accelerations and decelerations >3 m·s-2 presented the greatest proportion of low-demanding scenarios (<40% of most demanding scenarios). Regarding positional differences, backcourt players generally experienced a higher number of scenarios than frontcourt players in most variables, especially in total distance covered. For this variable, scenarios between 20 and 70% of most demanding scenarios during the 30-s epoch (p < 0.001; ES = 0.420.78), and scenarios between 50 and 90% of most demanding scenarios during the 60-s epoch (p < 0.001; ES = 0.400.64) showed significant differences between backcourt and frontcourt players. Our data suggest that match physical activities are position-dependent and variable-dependent. In addition, peak physical demands appear to be repeated during basketball competition. These results may be considered by practitioners to complement average values and most demanding scenarios when prescribing individualized training programs to optimize team performance.

PURPOSE:The purpose of the study was to examine the relationships between external and internal loads, and their ratio (efficiency index), with game performance between backcourt and frontcourt professional basketball players.METHODS:Game loads of 14 basketball players were monitored during 6 games. External load variables measured were total distance (TD); distance >18 km·h-1, commonly known as high-speed running (HSR); and number of accelerations (ACC) and decelerations (DEC) >3 m·s-2, whereas the internal load variable measured was average heart rate (HRmean). The ratio between external and internal load variables was calculated and defined through 4 efficiency indexes (TD:HRmean, HSR:HRmean, ACC:HRmean, and DEC:HRmean). Furthermore, basketball performance was quantified using game-related statistics.RESULTS:TD presented a small association with basketball performance, whereas the other external load variables and the 4 efficiency indexes calculated showed trivial relationships with game-related statistics. Furthermore, HRmean showed the greatest (small) associations with individual performance (P = .01-.02; r = .19 to .22). Regarding specific positions, the only 2 variables that presented significant differences were DEC (P = .01; d = 0.86) and DEC:HRmean (P = .01; d = 0.81), which showed higher values in backcourt players compared with frontcourt players.CONCLUSIONS:The results suggest that the best performances of basketball players during official competition are not associated with higher game loads. This illustrates the necessity to assess basketball performance from a holistic approach and consider more than just external and internal variables to better understand the players' performance during basketball competition.

The aims of this study were 3-fold: firstly, to present an integrative approach to external and internal load dynamics for monitoring fitness and fatigue status of specific in-court rink hockey training sessions in a standard microcycle; secondly, to assess the differences between training sessions and matches; the third and final aim was to assess the association between external and internal load metrics. The external load, using a local positioning system, and internal load, using the declared rate of perceived exertion, were measured during 23 in-season microcycles for nine top-level players. Training load data were analysed with regard to the number of days before or after a match [match day (MD) minus or plus]. In relation to the first aim, internal and external load metrics merged into a single integrated system using pooled data z-scores provided an invisible monitoring tool that places the players in the fitness-fatigue continuum throughout the different microcycle sessions. In this regard, MD-4 and MD-1 sessions tend to place, with a low dispersion, the players in a "low external and internal load" zone. On the contrary, in MD-3 and MD-2 sessions, as well as in MD, in which higher loads were recorded, most of the players were within a "high external and internal load" zone with a tendency towards dispersion towards the fitness or fatigue zones. Finally, and with regard to the second and third aims, an inverted "U-shape" load dynamic related to the specific goals of each training session was the main finding in terms of comparison between MD; a load peak between MD-3 and MD-2 sessions and a significant decrease in all the load variables in MD-1 sessions were found; and high-to-low correlations were found between external and internal load metrics. This study presents an integrative approach to the external and internal load of players for monitoring fitness and fatigue status during a standard microcycle in rink hockey that might provide team sport staff members with a deeper understanding of load distribution in the microcycle in relation to the match.

Torque measurement/estimation in permanent magnet synchronous machines (PMSMs) is required in a large variety of applications. Direct torque measurement by means of torque transducers is typically limited to laboratory applications due to cost, reliability, and room concerns. Alternatively, torque can be estimated. Torque estimation methods require accurate knowledge of machine parameters. Injection of a high frequency (HF) signal in the stator via inverter has been shown to be a viable option for online machine parameters identification in PMSMs. However, this introduces concerns on the performance of the machine due to the noise, vibration, and additional losses produced by the HF signal. This article proposes a torque estimation method for PMSMs using low cost Hall-effect sensors. The method is based on the dependency of the leakage flux complex vector due to interaction between permanent magnet flux and stator coil flux and does not interfere with the drive operation of the machine.

The use of new technologies in the routine diagnosis of constitutional abnormalities, such as high-resolution chromosomal microarray and next-generation sequencing, has unmasked new mechanisms for generating structural variation of the human genome. For example, complex chromosome rearrangements can originate by a chromosome catastrophe phenomenon in which numerous genomic rearrangements are apparently acquired in a single catastrophic event. This phenomenon is named chromoanagenesis (from the Greek "chromo" for chromosome and "anagenesis" for rebirth). Herein, we report 2 cases of genomic chaos detected at prenatal diagnosis. The terms "chromothripsis" and "chromoanasynthesis" and the challenge of genetic counseling are discussed.

The aims of this study were to analyze the peak physical demands in elite futsal by quantifying the most demanding scenarios of match play and to identify the differences between playing positions (defenders, wingers, and pivots) and the seasonal trend for five different rolling average time windows (30, 60, 120, 180, and 300 s). The most demanding scenarios of external load from distance, speed, acceleration, and deceleration variables were obtained from 14 elite futsal players using a local positioning system during 15 official matches in the premier Spanish Futsal League (2018–2019 season). The results showed an extremely large effect of the time window for all dependent variables in all positional groups. Another important finding of this study was that, in regard to the seasonal trend, only defenders reported clear moderate-large positive trends for high-speed running (>18 km⋅h –1 ) efforts, high-acceleration efforts, and high-deceleration efforts. Finally, moderate-large individual differences in player means for all dependent variables and clear differences between games for most dependent variables were found, suggesting how likely contextual factors may exert an influence on how “demanding” the most demanding scenarios are. The findings of this study provide coaches and strength and conditioning coaches further knowledge of the peak physical demands in elite futsal competition. This valuable information may lead to a more precise position-specific training prescription.

We construct a privacy-preserving, distributed and decentralized marketplace where parties can exchange data for tokens. In this market, buyers and sellers make transactions in a blockchain and interact with a third party, called notary, who has the ability to vouch for the authenticity and integrity of the data. We introduce a protocol for the data-token exchange where neither party gains more information than what it is paying for, and the exchange is fair: either both parties gets the other's item or neither does. No third party involvement is required after setup, and no dispute resolution is needed.

Wibson is a blockchain-based, decentralized data marketplace that provides individuals a way to securely and anonymously sell information in a trusted environment. The combination of the Wibson token and blockchain-enabled smart contracts hopes to allow Data Sellers and Data Buyers to transact with each other directly while providing individuals the ability to maintain anonymity as desired. The Wibson marketplace will provide infrastructure and financial incentives for individuals to securely sell personal information without sacrificing personal privacy. Data Buyers receive information from willing and actively participating individuals with the benefit of knowing that the personal information should be accurate and current. We present here two different components working together to achieve an efficient decentralized marketplace. The first is a smart contract called Data Exchange, which stores references to Data Orders that different Buyers open in order to show to the market that they are interested in buying certain types of data, and provides secure mechanisms to perform the transactions. The second is used to process payments from Buyers to Sellers and intermediaries, and is called Batch Payments.