The construction of multinuclear lanthanide-based molecules with significant magnetic exchange interactions represents a key challenge in the realization of single-molecule magnets with high operating temperatures. Here, we report the synthesis and magnetic characterization of two series of heterobimetallic compounds, (Cp*2Ln)2(μ-Co(pdt)2) (Ln = Y3+, Gd3+, Dy3+; pdt2- = 1,2-diphenylethylenedithiolate) and [K(18-crown-6)][(Cp*2Ln)2(μ-Co(pdt)2)] (Ln = Y3+, Gd3+), featuring two lanthanide centers bridged by a cobalt bis(1,2-dithiolene) complex. Dc magnetic susceptibility data collected for the Gd congeners indicate significant Gd-Co ferromagnetic exchange interactions with fits affording J = +11.5 and +7.33 cm-1, respectively. Magnetization decay and ac magnetic susceptibility measurements carried out on the single-molecule magnet (Cp*2Dy)2(μ-Co(pdt)2) reveal full suppression of quantum tunneling and open-loop hysteresis persisting up to 3.5 K. These results, along with those of high-field EPR spectroscopy, suggest that transition metalloligands can enforce strong exchange interactions with adjacent lanthanide centers while maintaining a geometry that preserves molecular anisotropy. Furthermore, the magnetic properties of [K(18-crown-6)][(Cp*2Gd)2(μ-Co(pdt)2)] show that increasing the spin of the ground state of the bridging complex may be a viable alternative to increasing J in obtaining well-isolated, strongly coupled magnetic ground states.

A family of boron nitride (BN)-based photocatalysts for solar fuel syntheses have recently emerged. Studies have shown that oxygen doping, leading to boron oxynitride (BNO), can extend light absorption to the visible range. However, the fundamental question surrounding the origin of enhanced light harvesting and the role of specific chemical states of oxygen in BNO photochemistry remains unanswered. Here, using an integrated experimental and first-principles-based computational approach, we demonstrate that paramagnetic isolated OB3 states are paramount to inducing prominent red-shifted light absorption. Conversely, we highlight the diamagnetic nature of O-B-O states, which are shown to cause undesired larger band gaps and impaired photochemistry. This study elucidates the importance of paramagnetism in BNO semiconductors and provides fundamental insight into its photophysics. The work herein paves the way for tailoring of its optoelectronic and photochemical properties for solar fuel synthesis.

A new material platform for boron nitride (BN) as a heterogeneous photocatalyst for solar fuels synthesis has recently emerged. One of the bottlenecks of this material is the lack of photoactivity under visible light, which hinders its rate performance. Theoretical studies have predicted that tuning the oxygen content in oxygen-doped BN (BNO) might be used to lower and vary the band gap. However, this is yet to be verified experimentally. We present herein a systematic experimental route facilitating simultaneous tuning of the chemical, magnetic and optoelectronic properties of BNO using a multivariate synthesis parameter space. Deep visible range band gaps (1.50 – 2.90 eV) were experimentally achieved and tuned over an oxygen composition of 2 – 14 at. %, and specific paramagnetic OB3 content of 7 – 294 a.u. g-1, thus supporting theoretical predictions. Through designing a response surface via a design of experiments (DOE) process, the key synthesis parameters influencing the chemical, magnetic and optoelectronic properties of BNO were identified. In addition, model prediction equations relating the aforementioned properties to the synthesis parameter space are presented. Accurate model predictions for the oxygen content and band gap were conducted and validated experimentally. Such a methodology is valuable for further advances in tailoring and optimising BN materials for heterogeneous photocatalytic reactions.

A combination of inelastic neutron scattering (INS), far-IR magneto-spectroscopy (FIRMS), and Raman magneto-spectroscopy (RaMS) has been used to comprehensively probe magnetic excitations in Co(AsPh3)2I2 (1), a reported single-molecule magnet (SMM). With applied field, the magnetic zero-field splitting (ZFS) peak (2D') shifts to higher energies in each spectroscopy. INS placed the ZFS peak at 54 cm-1, as revealed by both variable-temperature (VT) and variable-magnetic-field data, giving results that agree well with those from both far-IR and Raman studies. Both FIRMS and RaMS also reveal the presence of multiple spin-phonon couplings as avoided crossings with neighboring phonons. Here, phonons refer to both intramolecular and lattice vibrations. The results constitute a rare case in which the spin-phonon couplings are observed with both Raman-active (g modes) and far-IR-active phonons (u modes; space group P21/c, no. 14, Z = 4 for 1). These couplings are fit using a simple avoided crossing model with coupling constants of ca. 1-2 cm-1. The combined spectroscopies accurately determine the magnetic excited level and the interaction of the magnetic excitation with phonon modes. Density functional theory (DFT) phonon calculations compare well with INS, allowing for the assignment of the modes and their symmetries. Electronic calculations elucidate the nature of ZFS in the complex. Features of different techniques to determine ZFS and other spin-Hamiltonian parameters in transition-metal complexes are summarized.

The family of reduced [Mn12O12(O2CR)(16) (H2O)(4)](n) (n = 1, 2) single-molecule magnets (SMMs) has been expanded with the synthesis of new members using I as a stoichiometric one-electron reducing agent of the neutral n = 0 complexes. Electrochemical data,H- 1 NMR spectra of the [Mn12O12(O2CCH2Cl)(16)(H2O)(3)](0, ,2) salts, and the crystal structures of two complexes, (PPh4) [Mn12O12(O2CCH2Cl)(16)(H2O)(4)] and (PPh4)(2) [Mn12O12(O2CCH2Cl)(16)(H2O)(3)] have been obtained. For (PPh4)(2)[Mn12O12(O2CCH2Cl)(16)(H2O)(3)], the data confirm an S = 10 ground state, and magnetization vs dc field scans on a pristine crystal exhibit hysteresis loops possessing steps due to quantum tunneling of magnetization (QTM). In addition, two forms of the cluster have been identified in the crystal with distinctly different relaxation barriers, with the faster-relaxing form being the majority one in pristine crystals from mother liquor, and the slower-relaxing one becoming the majority one in vacuum-dried samples. Similar behavior is seen for (PPh4)[Mn12O12(O2CCHCl2)(16)(H2O)(4)] with an S = 19/2 ground state, which shows three forms to be present in the hysteresis loops of a pristine crystal, all converting to a slow-relaxing form on vacuum-drying. High-frequency EPR spectra of the latter confirm a high axial anisotropy with D = -0.477 cm (1 )and rationalize its effective relaxation barrier U-eff = 57 K. The combined work emphasizes a high sensitivity of such ultra-small nanomagnets to environmental influences, affecting their properties significantly, especially their quantum properties that are so important to many potential new 21st century applications. (C) 2020 Elsevier Ltd. All rights reserved.

Singlet fission-whereby one absorbed photon generates two coupled triplet excitons-is a key process for increasing the efficiency of optoelectronic devices by overcoming the Shockley-Queisser limit. A crucial parameter is the rate of dissociation of the coupled triplets, as this limits the number of free triplets subsequently available for harvesting and ultimately the overall efficiency of the device. Here we present an analysis of the thermodynamic and kinetic parameters for this process in parallel and herringbone dimers measured by electron paramagnetic resonance spectroscopy in coevaporated films of pentacene in p-terphenyl. The rate of dissociation is higher for parallel dimers than for their herringbone counterparts, as is the rate of recombination to the ground state. DFT calculations, which provide the magnitude of the electronic coupling as well as the distribution of molecular orbitals for each geometry, suggest that weaker triplet coupling in the parallel dimer is the driving force for faster dissociation. Conversely, localization of the molecular orbitals and a stronger triplet-triplet interaction result in slower dissociation and recombination. The identification and understanding of how the intermolecular geometry promotes efficient triplet dissociation provide the basis for control of triplet coupling and thereby the optimization of one important parameter of device performance.

Developing robust, multifunctional photocatalysts that can facilitate both hydrogen evolution via photoreforming of water and gas phase CO2 photoreduction is highly desirable with the long-term vision of integrated photocatalytic setups. Here, we present a step-change in the family of boron oxynitride materials by introducing the first example of a B-doped boron oxynitride (B-BNO). This material resolves an on-going bottleneck associated with BN-based materials, i.e. the lack of photoactivity under visible light. Detailed EPR studies revealed distinct hyperfine interactions between the free oxygen radicals and 3 neighbouring boron nuclei. This confirmed isolated OB3 sites, which contribute to band gap narrowing, as the radical species and origin of paramagnetism in BNO materials. We show that B-BNO can facilitate both liquid phase H2 evolution and gas phase CO2 photoreduction, using UV-Vis and deep visible irradiation (λ > 550 nm), without any co-catalysts. The evolution rates, quantum efficiencies, and selectivities observed for both reactions with B-BNO exceed those of its porous BNO counterpart, P25 TiO2 and bulk g-C3N4.

Effective control over the molecular orientation of pentacene was achieved with copper(i) iodide and results in a change in the functional properties with increases in both visible light absorption and work function.

権利 Rights © The Author(s) 2018. This art icle is licensed under a Creat ive Commons Attribut ion 4.0 Internat ional License, which permits use, sharing, adaptat ion, distribut ion and reproduct ion in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creat ive Commons license, and indicate if changes were made. The images or other third party material in this art icle are included in the art icle’s Creat ive Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the art icle’s Creat ive Commons license and your intended use is not permit ted by statutory regulat ion or exceeds the permit ted use, you will need to obtain permission direct ly from the copyright holder. To view a copy of this license, visit ht tp://creat ivecommons.org/licenses/by/4.0/.

Thin films of pentacene and p-terphenyl were grown via organic molecular beam deposition to enable solid-state dilution of functional molecules (pentacene) in an inert matrix (p-terphenyl) at higher concentrations than permitted by traditional crystal growth methods, such as melts. Growth rates were first optimised for single component films to ensure a precise control over the dopant/host concentrations when the mixed films were deposited. Both thin film and bulk phases can be identified in pentacene growths, with the precise lattice parameters dependent on the deposition rates. The effect on the microstructure, resulting from progressive dilution of pentacene in a p-terphenyl host, was then investigated. Although disorder increases and the crystallite size decreases in the mixture, with a minimum at a 1:1 ratio, phase segregation is not observed on the length scale (limit) that can be probed in our measurements. This indicates that the mixed films form homogeneous solid-solutions that may be employed for the investigation of solid-state phenomena. Our methodology can be extended to other compatible host-dopant systems used in optoelectronic and spintronic devices.

Building efficient triplet-harvesting layers for photovoltaic applications requires a deep understanding of the microscopic properties of the components involved and their dynamics. Singlet fission is a particularly appealing mechanism as it generates two excitons from a single photon. However, the pathways of the coupled triplets into free species, and their dependence on the intermolecular geometry, has not been fully explored. In this work, we produce highly ordered dilute pentacene films with distinct parallel and herringbone dimers and aggregates. Using electron paramagnetic resonance spectroscopy, we provide compelling evidence for the formation of distinct quintet excitons in ambient conditions, with intrinsically distinctive electronic and kinetic properties. We find that the ability of quintets to separate into free triplets is promoted in the parallel dimers and this provides molecular design rules to control the triplets, favouring either enhanced photovoltaic efficiency (parallel) or strongly bound pairs that could be exploited for logic applications (herringbone).