Tight focusing with very small f-numbers is necessary to achieve the highest at-focus irradiances. However, tight focusing imposes strong demands on precise target positioning in-focus to achieve the highest on-target irradiance. We describe several near-infrared, visible, ultraviolet and soft and hard X-ray diagnostics employed in a similar to 10(22) W/cm(2) laser-plasma experiment. We used nearly 10 J total energy femtosecond laser pulses focused into an approximately 1.3-mu m focal spot on 5-20 mu m thick stainless-steel targets. We discuss the applicability of these diagnostics to determine the best in-focus target position with approximately 5 mu m accuracy (i.e., around half of the short Rayleigh length) and show that several diagnostics (in particular, 3 omega reflection and on-axis hard X-rays) can ensure this accuracy. We demonstrated target positioning within several micrometers from the focus, ensuring over 80% of the ideal peak laser intensity on-target. Our approach is relatively fast (it requires 10-20 laser shots) and does not rely on the coincidence of low-power and high-power focal planes.

Gamma rays consist of high-energy photons that selectively interact with nuclei, induce and mediate nuclear reactions and elementary particle interactions, and exceed x-rays in penetrating power and thus are indispensable for analysis and modification of dense or compressed object interior. Yet, the available gamma sources lack power and brightness which, if available, would revolutionize science and technology. The predicted laser-driven Gamma Flash (GF) would be the highest-power and the brightest terrestrial gamma source with a 30-40 scattering in a laser-solid interaction at irradiance typically above 10^23W/cm^2. GF is one of the motivating goals for the most advanced laser facilities. However, till now GF remains overshadowed by simultaneously generated low-brightness Bremsstrahlung. Here we experimentally differentiate these two mechanisms and demonstrate a GF dominant regime producing several times the number of Bremsstrahlung photons. We found steep GF yield growth with the laser power and irradiance. Simulations revealed a Terawatt GF with nanometre source and an attosecond pulse train with a record brightness of 10^22photons/mm^2mrad^2s0.1%BW at up to tens of MeV. The small source size and high brightness paves the way towards spatially coherent gamma rays. At high photon energies, our regime is comparable in brightness to astrophysical Gamma Ray Bursts. We anticipate that the gamma ray source based on our findings will facilitate a breakthrough in research on future inertial fusion energy by enabling high-spatial-resolution time-resolved radiography of fuel mixing instabilities in extremely compressed targets. Such a new compact bright ultrafast gamma source could facilitate significant advances in time-resolved nuclear physics, homeland security, and nuclear waste management and non-proliferation.

We review a number of instruments employed in a high-intensity J-KAREN-P laser-solid interaction experiment and discuss the applicability of the diagnostics to the best target position determination with a ~10 μm accuracy, while the focal spot size was ~1 μm and peak intensity was up to 7×1021 W/cm2. We discuss both front- and back-side diagnostics, some of them operated in the infrared, visible and ultraviolet ranges, while others in the extreme ultraviolet, soft X-ray and gamma-ray ranges. We found that the applicability of some of the instruments to the best at-focus target position determination depends on the thickness of the target.

The influence of a transverse magnetic field on the formation and evolution of supersonic plasma jets and shocks was studied experimentally, and compared with 3D numerical simulations. An improved jet collimation was seen due to the change in the magnetic field topology restricting the radial expansion of the ablated plasma. The magnetic field was also shown to strongly affect the shock structures, both indirectly through the modified jet geometry, as well as due to a compression of the field lines in the shock region. The interaction characteristics were found to depend on the relative contribution of the magnetic and plasma pressure in balancing the ram pressure of the jet.

L3-HAPLS (High-repetition-rate Advanced Petawatt Laser System) at ELI (Extreme Light Infrastructure) Beamlines currently delivers 0.45 PW pulses (12 J in 27 fs) at 3.3 Hz repetition rate. A fresh target surface for every shot was placed at the laser focus using an in-house tape target system designed to withstand large laser intensities and energies. It has been tested for different material thicknesses (25 and 7.6 µm), while L3-HAPLS delivered laser shots for energies ranging from 1 to 12 J. A technical description of the tape target system is given. The device can be used in diverse geometries needed for laser-matter interaction studies by providing an ≈300° free angle of view on the target in the equatorial plane. We show experimental data demonstrating the shot-to-shot stability of the device. An x-ray crystal spherical spectrometer was set up to measure the Kα yield stability, while a GHz H-field probe was used to check the shot-to-shot electromagnetic pulse generation. Finally, we discuss short and mid-term future improvements of the tape target system for efficient user operation.

Abstract Developing compact ion accelerators using intense lasers is a very active area of research, motivated by a strong applicative potential in science, industry and healthcare. However, proposed applications in medical therapy, as well as in nuclear and particle physics demand a strict control of ion energy, as well as of the angular and spectral distribution of ion beam, beyond the intrinsic limitations of the several acceleration mechanisms explored so far. Here we report on the production of highly collimated ( $$\sim 0.2^{\circ }$$ ∼ 0 . 2 ∘ half angle divergence), high-charge (10s of pC) and quasi-monoenergetic proton beams up to $$\sim$$ ∼ 50 MeV, using a recently developed method based on helical coil targetry. In this concept, ions accelerated from a laser-irradiated foil are post-accelerated and conditioned in a helical structure positioned at the rear of the foil. The pencil beam of protons was produced by guided post-acceleration at a rate of $$\sim$$ ∼ 2 GeV/m, without sacrificing the excellent beam emittance of the laser-driven proton beams. 3D particle tracing simulations indicate the possibility of sustaining high acceleration gradients over extended helical coil lengths, thus maximising the gain from such miniature accelerating modules.

Relativistic electrons generated by the interaction of petawatt-class short laser pulses with solid targets can be used to generate bright x-rays via bremsstrahlung. The efficiency of laser energy transfer into these electrons depends on multiple parameters including the focused intensity and pre-plasma level. This paper reports experimental results from the interaction of a high intensity petawatt-class glass laser pulses with solid targets at a maximum intensity of 10(19) W cm(-2). In-situ measurements of specularly reflected light are used to provide an upper bound of laser absorption and to characterize focused laser intensity, the pre-plasma level and the generation mechanism of second harmonic light. The measured spectrum of electrons and bremsstrahlung radiation provide information about the efficiency of laser energy transfer.

Accurate characterization of incident radiation is a fundamental challenge for diagnostic design. Herein, we present an efficient spectral analysis routine that is able to characterize multiple components within the spectral emission by analytically reducing the number of parameters. The technique is presented alongside the design of a hard x-ray linear absorption spectrometer using the example of multiple Boltzmann-like spectral distributions; however, it is generally applicable to all absorption based spectrometer designs and can be adapted to any incident spectral shape. This routine is demonstrated to be tolerable to experimental noise and suitable for real-time data processing at multi-Hz repetition rates.

The P3 installation of ELI-Beamlines is conceived as an experimental platform for multiple high-repetition-rate laser beams spanning time scales from femtosecond via picosecond to nanosecond. The upcoming L4n laser beamline will provide shaped nanosecond pulses of up to 1.9 kJ at a maximum repetition rate of 1 shot/min. This beamline will provide unique possibilities for high-pressure, high-energy-density physics, warm dense matter, and laser–plasma interaction experiments. Owing to the high repetition rate, it will become possible to obtain considerable improvements in data statistics, in particular, for equation-of-state data sets. The nanosecond beam will be coupled with short sub-picosecond pulses, providing high-resolution diagnostic tools by either irradiating a backlighter target or driving a betatron setup to generate energetic electrons and hard X-rays.

The interaction of supersonic laser-generated plasma jets with a secondary gas target was studied experimentally. The plasma parameters of the jet, and the resulting shock, were characterized using a combination of multi-frame interferometry/shadowgraphy, and x-ray diagnostics, allowing for a detailed study of their structure and evolution. The velocity was obtained with an x-ray streak camera, and filtered x-ray pinhole imaging was used to infer the electron temperature of the jet and shock. The topology of the ambient plasma density was found to have a significant effect on the jet and shock formation, as well as on their radiation characteristics. The experimental results were compared with radiation hydrodynamic simulations, thereby providing further insights into the underlying physical processes of the jet and shock formation and evolution.

The design and the early commissioning of the ELI-Beamlines laser facility’ s 30 J,30 fs,10 Hz HAPLS（High-repetitionrate Advanced Petawatt Laser System） beam transport（BT） system to the P3 target chamber are described in detail.It is the world’s first and with 54 m length,the longest distance high average power petawatt（PW） BT system ever built.It connects the HAPLS pulse compressor via the injector periscope with the 4.5 m diameter P3 target chamber of the plasma physics group in hall E3.It is the largest target chamber of the facility and was connected first to the BT system.The major engineering challenges are the required high vibration stability mirror support structures,the high pointing stability optomechanics as well as the required levels for chemical and particle cleanliness of the vacuum vessels to preserve the high laser damage threshold of the dielectrically coated high-power mirrors.A first commissioning experiment at low pulse energy shows the full functionality of the BT system to P3 and the novel experimental infrastructure.

Strong magnetic fields of upto 20 T, corresponding to a current of tens of kA were produced in a coil connected to a single-plate of cm2 area irradiated by a kJ-ns laser pulse. The use of such macroscopic plates protects the coil from plasma debris, while maintaining a strong magnetic field for a time-scale much longer than the laser pulse duration. By correlating the measured magnetic field in the coil to the number of electrons emitted from the interaction zone, we deduce that the target capacitance is enhanced by two orders of magnitude because of the plasma sheath in the proximity of the focal spot. The particle-in-cell simulation illustrates the dynamics of sheath potential and current flow through the coil to ground, thus closing the circuit due to the escape of laser-produced hot electrons from the target.

The design of ellipsoidal plasma mirrors (EPMs) for the PEARL laser facility is presented. The EPMs achieve a magnification of 0.32 in focal spot size, and the corresponding increase in focused intensity is expected to be about 8. Designing and implementing such focusing optics for short-pulse (<100 fs) systems paves the way for their use in future high-power facilities, where they can be used to achieve intensities beyond 1023 W/cm2. A retro-imaging-based target alignment system is also described, which is used to align solid targets at the output of the ellispoidal mirrors (with a numerical aperture of 0.75 in this case).

Interaction of high-energy and high-power lasers with matter can generate strong shocks leading to extreme pressure and temperature conditions. While static compressions are limited to pressures of the order of 1 Mbar owing the mechanical properties of diamond anvil cells, dynamic laser-shock induced compressions give access to a much wider (P, T) diagram. The study of these extreme states is of high interest in many fields such as fundamental physics or material science, and also in applications to Inertial Confinement Fusion or planetology for modelling planets core interiors. Furthermore, in these extreme conditions, Equations of States (EoS), opacities, phase transitions and transport properties are strongly modified, therefore precise experimental measurements are strongly needed.

This article describes the design and presents recent results from testing and calibration of a forward Compton scattering high energy X-ray spectrometer. The calibration was performed using a bremsstrahlung source on the photon scattering facility at the γ Electron linac for beams with high brilliance and low emittance accelerator at Helmholtz-Zentrum Dresden-Rossendorf, which provides high energy X-ray photons with energies up to 18 MeV. The calibration was conducted at different bremsstrahlung end point energies-10.5, 13, 15, and 18 MeV. Experimental spectra show a systematic increase in the maximum energy, photon temperature, and flux. The spectrometer is effective for an energy range of 4-20 MeV with 20%-30% energy resolution. The spectrometer operates in low vacuum with pressure less than 0.1 mbar. Experimental tests showed that operating such a spectrometer in air causes a spuriously enhanced high energy signal due to Compton scattering of photons within air. The article also describes the design and shielding considerations which helped to achieve a dynamic range greater than 30 with this spectrometer. The comparison between the experimental results and Monte Carlo simulations are also presented.

This paper presents the calibration of two different kinds of image plates (IPs) for detecting electrons with kinetic energy in the range of 150 keV–1.75 MeV. The calibration was performed using a 90Sr β source. The paper also provides the measured fading response for the IPs in the time range from 12 min to 18 h. Calibration results are compared to Monte Carlo simulations of energy deposited by the electrons in the sensitive layer of the IPs. It was found that within this energy range a linear relation between simulated energy deposited by the electron in the phosphor layer and the measured photo stimulated luminescence in the IP is adequate to model the response of the IP.

ELI-Beamlines (ELI-BL), one of the three pillars of the Extreme Light Infrastructure endeavour, will be in a unique position to perform research in high-energy-density-physics (HEDP), plasma physics and ultra-high intensity (UHI) (1022W/cm2) laser–plasma interaction. Recently the need for HED laboratory physics was identified and the P3 (plasma physics platform) installation under construction in ELI-BL will be an answer. The ELI-BL 10 PW laser makes possible fundamental research topics from high-field physics to new extreme states of matter such as radiation-dominated ones, high-pressure quantum ones, warm dense matter (WDM) and ultra-relativistic plasmas. HEDP is of fundamental importance for research in the field of laboratory astrophysics and inertial confinement fusion (ICF). Reaching such extreme states of matter now and in the future will depend on the use of plasma optics for amplifying and focusing laser pulses. This article will present the relevant technological infrastructure being built in ELI-BL for HEDP and UHI, and gives a brief overview of some research under way in the field of UHI, laboratory astrophysics, ICF, WDM, and plasma optics.

The magnetic quadrupole structure formation during the interaction of two ultrashort high power laser pulses with a collisionless plasma is demonstrated with 2.5-dimensional particle-in-cell simulations. The subsequent expansion of the quadrupole is accompanied by magnetic-field annihilation in the ultrarelativistic regime, when the magnetic field cannot be sustained by the plasma current. This results in a dominant contribution of the displacement current exciting a strong large scale electric field. This field leads to the conversion of magnetic energy into kinetic energy of accelerated electrons inside the thin current sheet.

Magnetic reconnection is regarded as a fundamental phenomenon in space and laboratory plasmas. It converts magnetic energy to kinetic energy of plasma particles through the topological rearrangements of the magnetic field lines. Magnetic reconnection is believed to play an important role in the solar systems, such as solar flares and coronal mass ejections. Observations of rapid energy release in solar flare and the global convection pattern within the magnetosphere are strongly suggestive that reconnection must be occurring. With the development of laser technology, high power laser facilities have made great progress in recent decades. Ultra powerful pulse with TW and PW are available now. As a result, the laser-matter interaction enters regimes of interest for laboratory astrophysics such as magnetic reconnection. J. Y. Zhong et al.1 reported an experiment about Xray source emission by reconnection outflows. Two intense lasers with long pulse duration are focused on the solid Aluminum target to generate hot electrons. In this paper, we employ a hydrogen foam target with near critical density to investigate the reconnection. Two parallel ultra intense pulses are injected into the target. By the effect of laser wakefield acceleration, two strong electron beam are generated and both of them induce a magnetic dipole structure. With the expansion of the dipole, magnetic field annihilation occurs in the center part of the target. The induced electric field and particle acceleration are detected in the simulations as evidence for magnetic reconnection. The effects of separation distance between two laser pulses and laser intensity on magnetic reconnection are also discussed.

Tabletop reflex discharges in a Penning geometry have many applications including ion sources and eXtreme Ultra-Violet (XUV) sources. The presence of primary electrons accelerated across the cathode sheaths is responsible for the distribution of ion charge states and of the unusually high XUV brightness of these plasmas. Absolutely calibrated space resolved XUV spectra from a table top reflex discharge operating with Al cathodes and Ne gas are presented. The spectra are analyzed with a new and complete model for ion charge distribution in similar reflex discharges. The plasma in the discharge was found to have a density of similar to 10(18) m(-3) with a significant fraction >0.01 of fast primary electrons. The implications of the new model on the ion states achievable in a tabletop reflex plasma discharge are also discussed. (C) 2015 AIP Publishing LLC.