Background. This single-blind, noninferiority trial evaluated whether 10% carbamide peroxide (CP) applied for 2 or 4 hours daily is noninferior to 8 hours. Methods. A total of 120 healthy adults, with teeth shade A2 or darker, were randomly allocated to 3 groups (n = 40). All participants used 10% CP gel in a bleaching tray for 2, 4, and 8 hours daily for 14 days, with the option to extend treatment if they were dissatisfied. Color change was measured using a spectrophotometer and shade guides at baseline, every 5 days, and 1 month posttreatment. Risk and intensity of tooth sensitivity (TS) were assessed daily using a 0 through 10 visual analog scale. Satisfaction was recorded via a Likert scale wherein 1 corresponded to very dissatisfied and 7 corresponded to very satisfied and the Orofacial Esthetic Scale. Noninferiority was tested for color change using the 1976 formula (Delta Eab) at 1 month postbleaching (primary outcome), color change using the 2000 formula (AE00), Whiteness Index, and shade guide units, whereas TS and satisfaction were analyzed with X-2, analysis of variance, Kruskal-Wallis, and Friedman tests. Results. Color change in Delta Eab (2 vs 8 h: mean difference,-0.6; 90% CI,-2.1 to 1.0, 4 vs 8 h: mean difference, 0.0; 90% CI,-1.6 to 1.6) and A E00 values for shorter durations were noninferior to 8 hours at 1 month. Whiteness Index results were inconclusive. TS risk and intensity were similar (P > .05), and patient satisfaction improved across all groups similarly (P > .05). Conclusions. Shorter 2- and 4-hour daily bleaching with 10% CP is noninferior to the 8-hour protocol. Practical Implications. Shorter periods of at-home bleaching (2 and 4 h) can be prescribed depending on the patient's availability or preferences without jeopardizing the bleaching efficacy. This clinical trial was registered at Registro Brasileiro de Ensaios Cl & iacute;nicos (RBR-10vvfpcm).
OBJECTIVE:To evaluate the effects of incorporating a hydroxyapatite-capsaicin nanocomposite (HAp-CAP) into a 35 % hydrogen peroxide (HP) experimental bleaching gel on tooth sensitivity (TS) risk and intensity, bleaching effectiveness (BE), and patient satisfaction. MATERIALS AND METHODS:In a split-mouth, triple-blind, randomized controlled clinical trial, 54 participants received dental bleaching with two bleaching gels: 35 % HP+HAp-CAp, or 35 % HP alone (1 × 50 min; one-week interval). TS was recorded immediately, and at 1, 24, and 48 h post-bleaching using a 0-10 visual analogue scale (VAS). Color was evaluated before bleaching, one week after each session, and one month after treatment (ΔSGUs, ΔEab, ΔE00, and WID). Patient satisfaction was recorded by a 0-10 VAS. TS was evaluated by McNemar's test and paired t-test. BE and patient satisfaction between groups were compared using paired t-test (α = 0.05). RESULTS:87 % of participants experienced discomfort, regardless of the study group. The TS intensity differed between groups at all assessment times, favoring 35 % HP+HAp-CAp (p < 0.05). Significant BE occurred in all groups, with no significant difference between them (p > 0.05 for ΔSGUs, ΔEab, ΔE00, and WID). Patient satisfaction was high for both groups, without difference between them (p = 0.62). CONCLUSIONS:The 35 % HP+HAp-CAP bleaching gel did not reduce the risk but reduced the intensity of TS and did not affect BE. CLINICAL RELEVANCE:The addition of a hydroxyapatite-capsaicin nanocomposite to in-office bleaching gels reduced the tooth sensitivity intensity without compromising bleaching effectiveness.
At low concentrations used for in -office bleaching gels, such as 6% HP, gingival barrier continues to be performed. If we take into account that, in the at-home bleaching technique, no barrier is indicated, it seems that the use of a gingival barrier fails to make much sense when bleaching gel in low concentration is used for in -office bleaching. Objective: This double-blind, split -mouth, randomized clinical trial evaluated the gingival irritation (GI) of in -office bleaching using 6% hydrogen peroxide (HP) with and without a gingival barrier in adolescents, as well as color change and the impact of oral condition on quality of life. Methodology: Overall, 60 participants were randomized into which side would or would not receive the gingival barrier. In -office bleaching was performed for 50 minutes with 6% HP in three sessions. The absolute risk and intensity of GI were assessed with a visual analogue scale. Color change was assessed using a digital spectrophotometer and color guides. The impact of oral condition on quality of life was assessed using the Brazilian version of the Oral Health Impact Profile ( alpha=0.05). Results: The proportion of patients who presented GI for the "with barrier" group was 31.6% and for the "without barrier" group, 30% (p=1.0). There is an equivalence for the evaluated groups regarding GI intensity (p<0.01). Color change was detected with no statistical differences (p>0.29). There was a significant impact of oral condition on quality of life after bleaching (p<0.001). Conclusions: The use or not of the gingival barrier for in -office bleaching with 6% HP was equivalent for GI, as well as for bleaching efficacy, with improvement in the impact of oral condition on quality of life.
Purpose: To evaluate how incorporating copper nanoparticles (CuNp) into a universal adhesive affects the antimicrobial activity (AMA), bond strength (mu TBS), nanoleakage (NL), elastic modulus (EM) and nanohardness (NH) of resin-dentin interfaces, at 24 h (24 h) and after in situ cariogenic challenge (CC). Methods: CuNp (0% [control] and 0.1 wt%) was added to an adhesive. After enamel removal, the adhesives were applied to dentine surfaces. Each restored tooth was sectioned longitudinally to obtain two hemi-teeth; one of them was evaluated after 24 h, and the other was included in one of the intra-oral palatal devices placed in the mouths of 10 volunteers for 14 days in CC. After that, each hemi-tooth was removed, and any oral biofilm that formed was collected. The AMA was evaluated against Streptococcus mutans. For the 24 h and CC groups, each hemi-tooth was sectioned in the "x" direction to obtain one slice for each EM/NH evaluation. The remains of each hemi-tooth were sectioned in the "x" and "y" directions to obtain resin-dentin beams for mu TBS and NL evaluation (24 h and CC). ANOVA and Tukey's test were applied (alpha = 0.05). Results: The presence of CuNp significantly improved AMA as well as all of the evaluated properties (24 h; p < 0.05). Although the adhesive properties (mu TBS/NL) for all groups decreased after CC (p < 0.05), the adhesive containing CuNp showed higher mu TBS and lower NL as compared to the copper-free adhesive (p < 0.05). The incorporation of CuNp maintained NH/EM values after CC (p < 0.05). Conclusions: Adding 0.1% CuNp to an adhesive may provide antimicrobial activity and increase its bonding and mechanical properties, even under a cariogenic challenge. Significance: This is the first in situ study proving that incorporating CuNp into an adhesive is an achievable alternative to provide antimicrobial properties and improve the integrity of the hybrid layer under in situ cariogenic challenge.
This split-mouth randomized, single-blind clinical trial evaluated the gingival irritation (GI) of at-home bleaching with individual trays of different cutouts, as well as the tooth sensitivity (TS) and color change. One hundred and twenty patients were randomized as to which side would receive the type of bleaching tray cutout: scalloped (in the gingival margin) and nonscalloped (extended from the gingival margin). The at-home bleaching was performed for 30 min with 10% hydrogen peroxide (HP) for 2 weeks. The absolute risk and intensity of GI and TS were assessed with a visual analog scale. Color change was assessed using a digital spectrophotometer and a color guide (α = 0.05). The proportion of patients who experienced GI was 57.5% (odds ratio 95% CI = 1.1 [0.7 to 1.8]), with no significant difference between groups (p = 0.66). The proportion of patients who experienced TS was 64.1% (odds ratio 95% CI = 1.0 [0.6 to 1.6]), with no significant difference between groups (p = 1.0). There is equivalence of scalloped and noscalloped groups for GI intensity (p < 0.01). Significant whitening was detected for both groups. Although some differences were observed between groups (CIELab and CIEDE00; p < 0.02), these were below of the considered clinically noticeable. The different cutouts of trays proved to be equivalent when regarding gengival irritation and tooth sensitivity when 10% HP for at-home bleaching was used. Significant color change was observed in both groups. However, significant differences detected between groups are not considered clinically noticeable. Brazilian Clinical Trials Registry (RBR-2s34685). Scalloped or not, the individual trays for at-home bleaching could be considered a clinician’s decision.
Purpose The aim of this trial was to evaluate bleaching effectiveness, tooth sensitivity and gingival irritation of whitening patients with 10% versus 37% carbamide peroxide (CP). Methods Eighty patients were selected by inclusion and exclusion criteria and randomly allocated into two groups (n = 40): 37% CP and 10% CP. In both groups, patients performed whitening for 3 weeks, 4 h/day for 10% group and 30 min/day for 37% group. Color was evaluated with Vita Classical, Vita Bleachedguide 3D Master and Spectrophotometer Easyshade, at baseline, weekly and 30 days after treatment. Absolute risk and intensity of tooth sensitivity (TS) and gingival irritation (GI) were assessed with numeric rating scale (NRS) and a visual analog scale (VAS). Color changes were compared with t-test for independent samples. TS and GI were evaluated with Fisher's exact tests. Mann-Whitney test was used for NRS, and t-tests for VAS (alpha = 0.05). Results The 37% CP group showed faster whitening than 10% group at 1-3 weeks. However, 1 month after conclusion, both groups showed equivalent bleaching (p = 0.06). Regarding sensitivity and gingival irritation, 10% and 37% groups met no significant differences (p > 0.05). Conclusion The use of 37% CP 30 min/day showed equivalent results to 10% 4 h/day. Clinical significance The use of 37% carbamide peroxide 30 min/day may decrease the time of tray use in at-home protocol for whitening because it presents equivalent results to 10% carbamide peroxide 4 h/day.
OBJECTIVE:This study was aimed at comparing the bleaching efficacy and bleaching sensitivity (BS) of two higher-concentration in-office bleaching gels (37% carbamide peroxide [CP] and 38% hydrogen peroxide [HP]) applied under two conditions: alone or in association with sonic activation. METHODS:Fifty-six volunteers were randomly assigned in the split-mouth design into the following groups: CP, CP with sonic activation (CPS), HP, and HP with sonic activation (HPS). Two in-office bleaching sessions were performed. Color was evaluated using Vita Classical, Vita Bleachedguide, and digital spectrophotometer at baseline and at 30 days post-bleaching. Absolute risk and intensity of BS were recorded using two pain scales. All data were evaluated statistically (color changes [t test], BS [Chi-square and McNemar test], and BS intensity [VAS; t test; NRS; Wilcoxon; α = 0.05]). RESULTS:Significant and higher whitening was observed for HP when compared with CP (p < 0.04). However, higher BS intensity was observed in the former (p < 0.001). No significant difference was observed in whitening effect or BS when the HP or CP bleaching gels were agitated (sonic application) compared with when they were not (p > 0.05). CONCLUSION:The 37% CP gel demonstrated lower bleaching efficacy and lower BS compared with the 38% HP bleaching gel. The whitening effect was not influenced by the use of sonic activation. CLINICAL SIGNIFICANCE:The use of 37% CP gel did not achieve the same whitening effect when compared to 38% HP gel used for in-office bleaching. The use of sonic activation offers no benefit for in-office bleaching.
OBJECTIVES:This clinical study aimed to evaluate the effect of incorporating bioactive nanoparticles (n-Bm) inside an in-office bleaching gel on the risk and intensity of tooth sensitivity (TS) and on bleaching effectiveness.MATERIALS AND METHODS:Sixty-six participants were selected and randomly assigned into two groups: control-only in-office gel and experimental-in-office gel with n-Bm. Teeth were bleached in two sessions (3 × 15-min). TS was recorded using a VAS and NRS. The color change was evaluated by subjective (VITA Classical and VITA Bleachedguide) and objective (Easyshade spectrophotometer) methods at baseline and 30 days after the end of treatment. The TS was evaluated by McNemar, Wilcoxon Signed Rank, and paired t test. The color changes between groups were compared using paired t test (α = 0.05).RESULTS:No significant differences between the groups were observed in the risk (control = 27% [95%IC 18-39]; experimental = 21% [95%IC 13-32]) and intensity of TS, as well as in the color change (p >0.05) for any color measurement.CONCLUSION:The inclusion of n-Bm into the bleaching agents did not affect the whitening effectiveness, as well as the risk and intensity of TS between groups. However, the results of the absolute risk of TS were low for both in-office gels used.CLINICAL SIGNIFICANCE:Despite no significant differences between groups, both experimental bleaching agents present suitable results with low values for TS.
Objective: Compare the risk/intensity of tooth sensitivity (TS) and color change of a 30-minute vs. the recommended 120-minute application time of 4% hydrogen peroxide (HP) for at-home bleaching. Methods: A single-blind, parallel, randomized clinical trial was conducted with 92 adult patients with caries and restoration-free anterior teeth A2 or darker, randomly allocated to two groups. Bleaching trays containing 4% HP were used for three-weeks. A four-week regimen was also offered to the patients for the 30-min group after the end of the 3- week protocol. The color change was assessed with the Vita Classical (VITA Zahnfabrik, Bad Sackingen, Germany) and Vita Bleachedguide shade guides (VITA Zahnfabrik) and the Vita Easyshade spectrophotometer (VITA Zahnfabrik) at baseline, weekly, and 30 days after the bleaching. The absolute risk and the intensity of TS were assessed daily using the 0-10 visual analogue scale (VAS) and 5-point Numerical Rating Scale (NRS) scale, and patient satisfaction was recorded with a Likert 0-7 scale. Risk of TS (Fisher's test), intensity of TS in NRS scale (Mann-Whitney test), VAS scale (t-test), and a color change (t-test) were compared. Results: The 30-minute group saw color change of around 1 SGU inferior to the 120-minute group in all-time assessments (p<0.05). After an extra week of bleaching, mean color change was similar (p>0.05). Patient satisfaction was high for both groups (p>0.05). Conclusions: A four-week protocol of at-home dental bleaching with 4% HP for 30 minutes/day whitened teeth similarly to the 120 minutes/day protocol, with low intensity of dental sensitivity and high patient satisfaction.
This clinical trial evaluated the effect of the coadministration of ibuprofen/caffeine on bleaching-induced tooth sensitivity (TS). A triple-blind, parallel-design, randomized clinical trial was conducted on 84 patients who received ibuprofen/caffeine or placebo capsules. The drugs were administered for 48 hours, starting 1 hour before the in-office bleaching. Two bleaching sessions were performed with 35% hydrogen peroxide gel with 1-week interval. TS was recorded up to 48 hours after dental bleaching with a 0-10 visual analogic scale (VAS) and a 5-point numeric rating scale (NRS). The color was evaluated with VITA Classical and VITA Bleachedguide scales (ΔSGU) and VITA Easyshade spectrophotometer (ΔE*ab and ΔE00). The absolute risk of TS in both groups was evaluated using Fischer's exact test. Comparisons of the TS intensity (NRS and VAS data) were performed by using the Mann-Whitney test and a two-way repeated measures ANOVA, respectively. The color alteration between the groups was compared with the Student's t test. The significance level was 5%. There was no statistically significant difference between the groups for the absolute risk of TS (p = 1.00) or for the intensity of TS (p > 0.05). A bleaching of approximately 7 shade guide units was observed on the Vita Classical and Vita Bleachedguide scales, with no statistical difference between the groups. It was concluded that coadministration of ibuprofen and caffeine did not reduce the absolute risk or intensity of TS and did not interfere with the efficacy of dental bleaching.
Purpose This randomized, split-mouth, triple-blind clinical study evaluated the effect of application of nanoencapsulated eugenol (NE) on the absolute risk and intensity of tooth sensitivity (TS) resulting from in-office bleaching. Methods Fifty-six patients received a NE in one hemiarch and a placebo gel in the other hemiarch, determined by random sequence, before in-office bleaching. A visual analogue scale (VAS) (0-10) and a numeric rating scale (NRS) (0-4) were used to record TS during bleaching and 1 and 48 h after bleaching. The tooth color was performed from baseline to 2 weeks after bleaching with shade guides (Delta SGU) and a spectrophotometer ( increment E-ab, increment E-00,E- and WID). The TS was assessed through the McNemar test (alpha = 0.05) and by the Wilcoxon signed-rank test (NRS) and paired t-test (VAS). The paired test-t was employed to compare the color changes (Delta SGU and Delta E-ab, increment E-00,E- and WID). The significance level was 5%. Results No statistically significant difference was found in the absolute risk or intensity of TS between both groups (p > 0.05). A significant color change was observed in both groups (p > 0.05). Conclusion Administration of the gel containing NE before the in-office dental bleaching did not reduce the TS and did not interfere in the bleaching effect. Clinical relevance statement The use of desensitizing gel containing NE did not reduce in-office bleaching-induced tooth sensitivity.
Abstract Dual-cured buildup composites and simplified light-cured adhesive systems are mixed with a chemical activator to prevent the incompatibility between them. Objective: To evaluate microshear bond strength (μSBS) and nanoleakage (NL) of three universal adhesives used under buildup composites using different curing modes, at baseline and after 6-months (6m). Methodology: Dentin specimens of 55 molars were assigned to: Clearfil Universal Bond[CFU], Prime&Bond Elect[PBE] and One Coat 7 Universal[OCU]. All-Bond Universal[ABU] and Adper Scotchbond Multi-Purpose[SMP] were used as controls. CFU, PBE, and OCU were: light-cured [LC], dual-cured using a self-curing activator [DC], and self-cured, using a self-curing activator and waiting for 20 min [SC]. Upon the application of the adhesive, transparent matrices were filled with a dual-cured buildup composite and light cured, then tested in mSBS. For NL, the specimens were submersed in ammoniacal silver nitrate and sectioned to observe under the SEM. Three-way ANOVA and Tukey's test were applied (α=0.05). Results: OCU/LC-PBE/LC resulted in higher mean μSBS than ABU/LC. For SMP/DC higher mean μSBS were obtained than for both CFU/DC and OCU/DC (baseline). No universal adhesive was significantly affected by curing mode or storage time. CFU, PBE, and OCU did not undergo significant changes in any curing mode (p>0.05). NL (baseline) PBE/LC resulted in higher %NL compared to ABU/LC. SMP/DC resulted in higher %NL than CFU/DC-OCU/DC. CFU/LC/DC resulted in lower %NL than CFU/SC. PBE/SC resulted in lower %NL than PBE/DC. OCU/LC/SC showed lower %NL than OCU/DC. OCU showed significant lower %NL than CFU and PBE. All CFU groups, as well as OCU/SC, resulted in increased %NL at 6m when compared with baseline. Conclusion: For universal adhesives used in etch-and-rinse mode, self-cured activator and different curing modes did not influence μSBS. However, some interactions were observed for NL, but this influence was material-specific.
Objectives: This study aimed to evaluate the desensitizing effect of a prefilled disposable tray containing potassium nitrate and fluoride on the self-reported tooth sensitivity (TS) and the bleaching efficacy of 40% hydrogen peroxide bleaching agent used for in-office bleaching in comparison with potassium nitrate and fluoride gel applied in a conventional-delivered tray system in an equivalence clinical trial. Methods and Materials: Seventy-eight patients, with a right maxillary canine darker than A3, were selected for this single-blind (evaluators), randomized clinical trial. Teeth were bleached in two sessions with a one-week interval in between. Before in-office bleaching, the prefilled disposable tray or conventional tray containing potassium nitrate and fluoride was used for 15 minutes. Subsequently, the bleaching agent was applied in two 20-minute applications (per the manufacturer's directions) in each session. The color change was evaluated by subjective (Vita Classical and Vita Bleachedguide) and objective (Easyshade Advance Spectrophotometer) methods at baseline and 30 days after the first bleaching session. TS was recorded for up to 48 hours using a 0-10 visual analog scale. The absolute risk was evaluated by chi-square test, while the intensity of TS was evaluated by McNemar test (alpha=0.05). Color change in shade guide units and Delta E was analyzed by Student t-test for independent samples (alpha=0.05). Results: Significant whitening was observed in both groups after 30 days of clinical evaluation. The use of different methods of desensitizer in a tray did not influence the absolute risk and intensity of TS (p>0.05), although a tendency of lower risk of TS with the prefilled disposable tray containing potassium nitrate and fluoride was observed. Conclusion: The use of a prefilled disposable tray containing potassium nitrate and fluoride before the application of the in-office bleaching product did not affect the whitening degree and decreased self-reported TS when compared with a conventional-delivered tray system.
Avaliou-se a resistência ao microcisalhamento (RUM) e a nanoinfiltração (NI) de adesivos universais aplicados como sistemas convencionais em restaurações indiretas com ou sem ativador de autopolimerização (AA) usando diferentes protocolos de polimerização. Utilizou-se dentina oclusal de 55 molares humanos. Os espécimes foram alocados aleatoriamente para: All-Bond Universal / Core Flo DC [ABU] Clearfil Universal Bond / Clearfil DC Core Plus [CFU] Prime & Bond Elect / FluoroCore 2+ [PBE] e One Coat 7 Universal / ParaCore [OCU]. O Clearfil SE Bond / Clearfil DC Core Plus [CSE] foi utilizado como controle. Para CFU, PBE e OCU, foram utilizados protocolos de fotopolimerização [FP], polimerização dual [DP] e autopolimerização [AP]. Testes ANOVA e Tukey foram utilizados (a 0,05). RUM: Modo FP - ABU resultou em RUM menor do que todos os outros adesivos FP. Modo DP - CSE mostrou resultado maior do que CBU e OCU, porém semelhante ao PBE. Modo AP - PBE resultou em RUM menores que os modos PBE / DP e FP. Para CBU e OCU, não houve diferença nos modos FP, DP e AP. NI: ABU resultou em NI menor que o modo PBE / FP, mas semelhante ao modo CBU / FP e OCU / FP. O modo CSE / DP resultou em NI maior em comparação com todos os adesivos universais DP. O modo CFU / AP resultou em NI maior que CFU / FP e modo DP. PBE / FP e DP resultaram em NI maior que o modo PBE / AP. O modo OCU / DP resultou em NI maior do que OCU / FP e modo AP. Para os adesivos universais, AA e os diferentes protocolos de polimerização influenciaram o RUM e NI todavia, esta influência foi adesivo- dependente.Palavras-chave: Microcisalhamento. Nanoinfiltração. Restaurações Indiretas.
PURPOSE:To evaluate the immediate and 12-month microtensile bond strength (μTBS) of two self-etch adhesives on sclerotic dentin with or without previous EDTA conditioning. The conditioning pattern and the relative area of open dentinal tubules were also evaluated.MATERIALS AND METHODS:Twenty-eight bovine incisors with naturally exposed sclerotic dentin were used. For μTBS testing, 20 teeth were divided into 4 groups (n = 5) according to the combination of the main factors: 1. adhesive (Clearfil SE Bond [CSE, Kuraray] and Adper SE Plus [ADSE, 3M Oral Care]); 2. surface treatment (previous conditioning with EDTA and previous conditioning with distilled water [DW]). The sclerotic surfaces were conditioned with either 17% EDTA or DW for 2 min prior to adhesive application. Composite buildups were constructed. Specimens were sectioned to obtain composite-dentin sticks (0.8 mm2) to be tested immediately or after 12 months (distilled water at 37°C) in tensile mode (0.5 mm/min). The conditioning pattern and the relative area of open dentinal tubules (OT) were evaluated in the remaining eight teeth. After adhesive application, the surfaces were rinsed off with acetone and ethanol. Then the surface was evaluated by SEM with image software. Data from μTBS and OT were submitted to three-way repeated measures ANOVA and data from OT were submitted to one-way repeated measures ANOVA. After, for both tests, Tukey's post-hoc test was applied (α = 0.05).RESULTS:For both adhesives, EDTA resulted in the highest mean immediate μTBS (p = 0.002), which remained stable after 12 months of water storage (p < 0.38). CSE showed higher μTBS when compared to ADSE (p = 0.001). Degradation of the mean μTBS was observed for both adhesives only in the DW groups. Adhesive application plus with EDTA conditioning increased the OT area in comparison with only adhesive application (p < 0.001).CONCLUSION:EDTA conditioning increased the immediate microtensile bond strength in sclerotic dentin substrate and prevented degradation when associated with a self-etch adhesive.
OBJECTIVES:To measure microshear bond strength (μSBS) and nanoleakage (NL) of self-etch universal adhesives under core buildup restorations using different curing protocols, at 24h and after 6-month water storage. METHODS:Middle dentin of 55 molars was divided into: Clearfil Universal Bond [CFU], Prime&Bond Elect [PBE], and One Coat 7 Universal [OCU]. All-Bond Universal [ABU] and Clearfil SE Bond [CSE] were used as control. CFU, PBE and OCU were: light-cured [LC], dual-cured [DC] and self-cured [SC]. Data were analyzed separately (two-way ANOVA), Tukey's test (α=0.05). RESULTS:μSBS: At 24h OCU/LC resulted in statistically higher μSBS than ABU. CSE/DC showed statistically higher μSBS than all DC adhesives. PBE/LC resulted in significant lower μSBS than the respective DC/SC modes (p<0.001). At 6-month, both CFU and PBE (LC/SC), resulted in a significant decrease in μSBS. μSBS for OCU/DC decreased significantly (p<0.001) compared to the respective LC/SC modes. NL: At 24h, ABU showed %NL similar to CBU/LC and OCU/LC (p>0.05). CSE/DC resulted in significantly higher %NL than OCU/DC but significantly lower than PBE/DC. CFU/LC/SC resulted in significantly lower %NL than CFU/DC. PBE/SC resulted in significant lower %NL than PBE/LC and PBE/DC. OCU/LC and OCU/DC resulted in significant lower %NL than OCU/SC (p<0.001). At 6-month ABU, CSE, CFU/LC and CFU/SC, resulted in a significant increase in %NL. SIGNIFICANCE:Self-cured activator and different curing protocols influenced μSBS and NL of self-etch universal adhesives, but this influence was material-dependent.
O aquecimento global tem recebido grande destaque na mídia em consequência das perturbações que o meio ambiente terrestre vem sofrendo. Nesse contexto a educação do cidadão para atitudes responsáveis é fundamental. Estas atividades são parte do projeto de extensão “Criação de Clubes de Ciências” cujo o objetivo é desenvolver nos estudantes o espírito critico e a aprendizagem do método científico. Este trabalho apresenta resultados de uma atividade desenvolvida no Clube de Ciências do município de Ipiranga – PR, que objetivou conscientizar estudantes da Educação Básica acerca do problema ambiental. A atividade baseou-se na observação, de um ecossistema representado por Terrários, durante o período de cinco meses. Foram montados dois terrários, simulando um ambiente de mata úmida. Esta atividade contribuiu para a formação de estudantes conscientes, capazes de observar um problema ambiental, usando o método científico para propor soluções e reconhecer as interrelações entre eventos ambientais e climáticos e o cotidiano.