Refractometric biosensing is a vital label-free tool for the real time detection and interaction analysis of biological and chemical substances. Nanophotonic platforms like Surface Plasmon Resonance (SPR) have played a critical role in providing refractometric sensing capabilities for clinical diagnostics and environmental monitoring. However, traditional systems operating in a single-polarization state cannot fully characterize complex optical properties such as birefringence, which is crucial to resolve many complex biological interactions. Although Bloch Surface Wave (BSW) sensors can support both TE and TM modes, a key capability SPR lacks, they have historically been implemented in single-mode configurations. In this paper, we present a polarization multiplexed BSW refractometric sensing system, simultaneously tracking the resonant wavelength shifts of both TE and TM BSW modes through time. Our technique was applied to investigate single-strand DNA growth during rolling circle amplification (RCA). To accurately recover the time-dependent birefringence, capturing dynamics of the DNA growth and orientation of its chains, we implemented a two-stage modeling approach based on the TMM. First, we utilized a wavelength-dependent surface sensitivity model, confining refractive index changes to the immediate layer above the crystal, to distinguish isotropic background dynamics from birefringent signals. Following the onset of RCA, we transitioned to a model that accounted for the vertical growth of the DNA layers in time. By fitting this model to the TE and TM resonant shifts, we monitor the growth rate of the single-strand DNA layer as well as the refractive index along the two polarization components. Our findings demonstrate the platform's ability to resolve the structural evolution of complex bimolecular interactions associated with conformational changes.

This manuscript reports on a Ni/Fe-based bilayer catalyst developed to boost the oxygen evolution reaction in anion exchange membrane water electrolyzers. The electrochemical behavior toward the oxygen evolution reaction of several NiFe/NiFeO metal-oxide bilayer catalysts, prepared by magnetron sputtering at oblique angle deposition (MS-OAD) on a flat stainless-steel substrate, was assessed in a three-electrode electrochemical cell in comparison with the behavior of both a metal NiFe and an oxide NiFeOx single-layer catalyst. The morphology and chemical nature of these catalysts, as prepared and after electrochemical usage, were characterized by X-ray photoelectron spectroscopy, Raman spectroscopy, Fourier transform infrared spectroscopy, and scanning electron microscopy. A thorough electrochemical characterization of the different catalyst formulations revealed a higher efficiency for the bilayer catalysts, in terms of both activity and long-term stability, and provided some clues to account for this superior performance in terms of morphology and surface reactivity of each catalyst. As a proof of concept, the best-performing bilayer configuration was then deposited onto a stainless steel felt porous transport layer (PTL) substrate and tested as an ionomer-free anode electrode in a membrane electrode assembly (MEA). Results revealed that the MS-OAD catalysts performed well when deposited on PTLs and that, under this configuration, a bilayer catalyst anode is slightly more efficient than the NiFe single-layer catalyst. Additionally, the possibility of scaling up the MS-OAD procedure to large areas has been demonstrated by the preparation of the bilayer catalysts on a 64 cm2 PTL and its successful integration and operation in a large prototype single cell.

Plasma treatment of seeds is an efficient procedure to accelerate germination, to improve initial stages of plant growth, and for protection against pathogen infection. Most studies relate these beneficial effects with biochemical modifications affecting the metabolism and genetic growth factors of seeds and young plants. Using barley seeds, in this work, we investigate the redistribution of ions in the seed surface upon their treatment with cold air plasmas. In addition, we investigate the effect of plasma in the lixiviation of ions through the seeds' hull when they are immersed in water. Ion redistribution in the outer layers of air plasma-treated seeds has been experimentally determined through X-ray photoelectron spectroscopy analysis in combination with in-depth chemical profiling with gas cluster ion beams. The results show that in the shallowest layers of the seed hull (at least up to a depth of ∼100 nm) there is an enrichment of K+ and Ca2+ ions, in addition to changes in the O/C and N/C atomic ratios. These data have been confirmed by the electron microscopy/fluorescence analysis of seed cuts. Observations have been accounted for by a Monte Carlo model, simulating the electrostatic interactions that develop between the negative charge accumulated at the seed surface due to the interaction with the plasma sheath and the positive ions existing in the interior. Furthermore, it is shown that upon water immersion of plasma-treated seeds mobilized ions tend to lixiviate more efficiently than in pristine seeds. The detection of a significant concentration of NO3- anions in the water has been attributed to a secondary reaction of nitrogen species incorporated into the seeds during plasma exposure with reactive oxygen species formed on their surface during this treatment. The implications of these findings for the improvement of the germination capacity of seeds are discussed.

In this work a set of mono- and bi-layered nanostructured Ni-Fe electrocatalysts prepared by magnetron sputtering deposition in an oblique angle configuration have been tested as anodes for urea assisted water electrolysis. In a three -electrode cell, it was found that an oxide/metal bilayer outperforms single metal or oxide layer configurations for the urea electro-oxidation. It is also found that the incorporation of Fe within the Ni structure stabilizes the electrodes likely because it produces a decrease in the surface poisoning of the electrocatalyst. The improved performance observed for the oxide/metal bilayer configuration has been attributed to a synergetic effect between the active (oxy)hydroxide Ni-Fe catalytic species at the outer layers and a high electrical conductivity through the underlying metallic layer. The bilayer electrocatalyst tested in an anion exchange membrane water electrolyser showed an overpotential decrease of 0.13 V when comparing urea oxidation vs. pure water electrolysis. Results prove a synergetic effect between the hydrogen production through water electrolysis and the removal of organic pollutants in water.

NiFe electrocatalysts are among the most active phases for water splitting with regard to the alkaline oxygen evolution reaction (OER). The interplay between Ni and Fe, both at the surface and in the subsurface of the catalyst, is crucial to understanding such outstanding properties and remains a subject of debate. Various phenomena, ranging from the formation of oxides/(oxy)hydroxides to the associated segregation of certain species, occur during the electrochemical reactions and add another dimension of complexity that hinders the rational design of electrodes for water splitting. In this work, we have developed the procedure for the quantification of chemical depth profiling by XPS/HAXPES measurements and applied it to two NiFe electrodes with different porosities. The main outcome of this study is related to the surface reconstruction of the electrodes during the OER, followed at two different depths by means of X-ray photoelectron spectroscopy. We find that Fe initially segregates at the surface when exposed to ambient conditions, resulting in the formation of an inactive FeOx phase. In addition, the porosity of the catalyst plays a significant role in the segregation process and thus in the performance of the electrode. In particular, the higher porosity of the nanostructured sample is responsible for a more pronounced diffusion of Fe from the subsurface to the surface with a more effective suppression of the activity of the Ni1-xFexOOH phase. These results highlight the importance of the fact that the chemical state of the surface of a multielement system is a snapshot in time, dependent on both external parameters, such as the applied potential and the adjacent electrolyte, and the underlying bulk properties accessible with HAXPES.

We describe a novel one-dimensional photonic crystal design allowing for the concurrent excitation of transverse-electric and transverse-magnetic Bloch surface waves, thus paving the way for polarization-resolved sensing experiments. We discuss its application for the surface-enhanced sensing of oriented DNA molecules through nanoscale birefringence measurements.

This paper reviews a procedure that allows for extracting primary photoelectron or Auger electron emissions from homogeneous isotropic samples. It is based on a quantitative dielectric description of the energy losses of swift electrons travelling nearby surfaces in presence of stationary positive charges. The theory behind the modeling of the electron energy losses, implemented in a freely available QUEELS-XPS software package, takes into account intrinsic and extrinsic effects affecting the electron transport. The procedure allows for interpretation of shake-up and multiplet structures on a quantitative basis. We outline the basic theory behind it and illustrate its capabilities with several case examples. Thus, we report on the angular dependence of the intrinsic and extrinsic Al 2s photoelectron emission from aluminum, the shake-up structure of the Ag 3d, Cu 2p, and Ce 3d photoelectron emission from silver, CuO and CeO2, respectively, and the quantification of the two-hole final states contributing to the L3M45M45 Auger electron emission of copper. These examples illustrate the procedure, that can be applied to any homogeneous isotropic material.

We design a simple dielectric multilayer capable of sustaining broadband superchiral surface waves. We show that the platform can produce large optical chirality enhancements in a wavelength range of hundreds of nanometers. We finally demonstrate that these properties result in the enhancement of the optical rotation signal well above two orders of magnitude, thus extending surface-enhanced chiral spectroscopies beyond the traditionally addressed circular dichroism signals.

We adopt genetic multi-objective optimization to design dielectric multilayers that support superchiral surface waves across a wide range of wavelengths. Our research reveals that it is possible to obtain extremely simple platforms that can significantly enhance the optical chirality in a wavelength range of hundreds of nanometers. Additionally, we demonstrate that this approach enhances the circular dichroism signal by more than two orders of magnitude when a layer of chiral molecules is deposited on top of the dielectric stack. As a result, our findings potentially expand the capabilities of chiral spectroscopies beyond what is usually possible with conventional circular dichroism measurements.

Large amount of wastewater is produced by washing machines and dishwashers, which are used in a daily basis. This domestic wastewater generated in households or office buildings (also called greywater) is drained directly to the drainpipes without differentiation from that with fecal contamination from toilets. Detergents are arguably the pollutants most frequently found in greywater from home appliances. Their concentrations vary in the successive stages in a wash cycle, which could be taken into account in a rational design of home appliances wastewater management. Analytical chemistry procedures are commonly used to determine the pollutant content in wastewater. They require collecting samples and their transport to properly equipped laboratories, which hampers real time wastewater management. In this paper, optofluidic devices based on planar Fabry-Perot microresonators operating in transmission mode in the visible and near infrared spectral ranges have been studied to determine the concentration of five brands of soap dissolved in water. It is found that the spectral positions of the optical resonances redshift when the soap concentration increases in the corresponding solutions. Experimental calibration curves of the optofluidic device were used to determine the soap concentration of wastewater from the successive stages of a washing machine wash cycle either loaded with garments or unloaded. Interestingly, the analysis of the optical sensor indicated that the greywater from the last water discharge of the wash cycle could be reused for gardening or agriculture. The integration of this kind of microfluidic devices into the home appliances design could lead to reduce our hydric environmental impact.

We present the user‐friendly and freely available software package QUEELS (QUantitative analysis of Electron Energy Losses at Surfaces) that allows to calculate effective inelastic scattering cross sections within the dielectric response description, for swift electrons travelling nearby surfaces in several environments. We briefly describe the underlying theoretical models and illustrate its use to evaluate the distribution of energy losses taking place in electron spectroscopies like transmission electron energy loss spectroscopy (TEELS), X‐ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and reflection electron energy loss spectroscopy (REELS), which are widely used for material analysis. This includes the intrinsic excitations due to the core hole in XPS and AES.

This work is carried out in the context of the anion exchange membrane water electrolysis (AEMWE) and pursuits to determine the influence of different cell components on the global electrochemical performance. Ionomer-free electrodes consisting of anodic Ni-Fe and cathodic Ni electrocatalysts deposited by magnetron sputtering in an oblique angle deposition configuration were utilized for this study. In addition to the characteristics and equivalent thickness of the electrocatalysts, other factors affecting the efficiency that have been considered in this study encompass the type of gas diffusion layer (GDLs), including carbon paper and stainless-steel fiber paper supports, and several commercial anion exchange membranes. The electrocatalytic performances in both a threeelectrode and complete single cell AEMWE set-ups, together with the physico-chemical characterization of the electrodes before and after operation, have served to select the optimum components for the utilized cell configuration. Thus, current densities of 670 mA cm-2, at polarization voltage of 2.2 V, 1.0 M KOH electrolyte and 40 degrees C were obtained in a membrane electrode assembly. A seven days chronopotentiometry experiment at a fixed current of 400 mA cm-2 demonstrated a noticeable stability of this type of AEMWE cells incorporating ionomer-free electrodes.

Ni and Ni-Fe nanostructured layers prepared by magnetron sputtering in an oblique angle deposition configuration (MS-OAD) have been used as anode and cathode catalysts for hybrid ethanol-water electrolysis in an anion exchange membrane (AEM) electrolyser. Physico-chemical and electrochemical characterization in a threeelectrode cell has been carried out to determine the optimal characteristics of the anodic films. Current densities up to 434 mA cm-2 at 2.0 V in a 1.5 M EtOH and 2.0 M KOH fuel solution were achieved with excellent operational stability for 3 days. These experiments show that the oxygen evolution reaction taking place at the anode is completely replaced by the ethanol oxidation reaction under our explored reaction conditions. The obtained results evidence the interest of this kind of organic vs. pure water electrolysis to decrease the overall electrical energy consumption for the production of hydrogen.

Light trapping effects are known to boost the photocatalytic degradation of organic molecules in 3D photonic structures of anatase titania (a-TiO2) with an inverse opal configuration. In the present work, we show that photocatalytic activity can also be enhanced in a-TiO2 thin films if they are incorporated within a nanoporous 1D optical resonant microcavity. We have designed and manufactured multilayer systems that, presenting a high open porosity to enable a straightforward diffusion of photodegradable molecules, provide light confinement effects at wavelengths around the absorption edge of photoactive a-TiO2. In brief, we have observed that a nanoporous 1D Bragg microcavity prepared by electron beam evaporation at oblique angles comprising a central defect layer of nanoporous a-TiO2 boosts the photocatalytic degradation of nitrobenzene and methyl orange dye solutions. The multilayer structure of the microcavity was designed to ensure the appearance of optical resonances at the a-TiO2 layer location and wavelengths around the absorption onset of this semiconductor. In this porous 1D Bragg microcavity, the diffusion constraints of molecules through the capping layers covering the a-TiO2 are effectively compensated by an increase in the photocatalytic activity due to the light confinement phenomena. We also report that the absorption coefficient of methyl orange dye solution infiltrated within the pore structure of the microcavity is exalted at the wavelengths of the corresponding optical resonances. This effect gives rise to a small but non-negligible visible light photodegradation of dye molecules. The possibilities of tailoring the design of 1D photonic systems to boost the photocatalytic activity of a-TiO2 are discussed.

Bloch surface waves sustained by truncated 1D photonic crystals (1DPCs) are well known tools for surface-enhanced spectroscopy. They provide strongly confined fields with uniform distribution over a large surface area, a characteristic exploited in standard refractometric sensing. However, their application to polarization-sensitive investigations is not straightforward because the transverse electric (TE) and magnetic (TM) surface modes possess distinct dispersion relations, therefore their relative phase is not conserved along propagation and the polarization state of any wave obtained by combining these modes is ill-defined. In this work, a novel design of a 1DPC is realized in which the TE and TM modes exhibit the same phase velocity over a broadband spectral range and thus their dispersion relations overlap. The capability to simultaneously excite TE and TM modes with a well-defined phase relation allows the generation of surface waves with a controlled polarization state. This paves the way to polarization-resolved surface-enhanced analysis, including, for example, linear and circular dichroism spectroscopy of grafted molecular layers at the photonic crystal surface.

A bottleneck for the deployment of the Anion Exchange Membrane Water Electrolysis (AEMWE) is the manufacturing of efficient and long lasting anodes and cathodes for the cells. Highly performant bimetallic Ni/Fe catalyst films with various atomic ratios have been prepared by magnetron sputtering in an oblique angle configuration (MS-OAD) and used as anodes for AEMWE. Electrocatalytic experiments in a small three-electrode cell and a thorough analysis of the electrode properties with various physico-chemical characterization tech-niques have been used to select the nanostructured anode catalyst which, depicting an optimized Ni/Fe ratio, presents the maximum activity for the oxygen evolution reaction. These anode layers are then scale-up for their integration in an AEMWE cell where the influence of assembly conditions and the effect of adding an ionomer to the anodes have been studied. The obtained results have demonstrated the outstanding properties of the fabri-cated bimetallic films in terms of activity, stability, and operation under ionomer-free conditions. Current density values around 400 and 600 mA cm(-2) at 40 degrees C and 60 degrees C (2.0 V), respectively, much higher than those obtained with pure Ni, were obtained with an optimized membrane electrode assembly. The high yield obtained with these electrodes gains further relevance when considering that the current yield per unit mass of the anodic active phase catalyst (i.e., 1086 mA mg(-1) at 2.0 V and 40 degrees C) is the highest among equivalent values reported in literature. The possibilities and prospects of the use of bimetallic catalyst films prepared by MS-OAD for AEMWE are discussed.

We realize and experimentally characterize a novel platform for surface-enhanced sensing through Bloch Surface Waves (BSWs). We test a one-dimensional photonic crystal, with a high index inclusion in the top layer, that sustains surfaces modes with, in principle, arbitrary polarization. This is achieved through the coherent superposition of TE and TM dispersion relations of BSWs, which can also provide superchiral fields over a wide spectral range (down to the UV). The resulting platform paves the way to the implementation of polarization-resolved surface-enhanced techniques.

Water electrolysis to obtain hydrogen in combination with intermittent renewable energy resources is an emerging sustainable alternative to fossil fuels. Among the available electrolyzer technologies, anion exchange membrane water electrolysis (AEMWE) has been paid much attention because of its advantageous behavior compared to other more traditional approaches such as solid oxide electrolyzer cells, and alkaline or proton exchange membrane water electrolyzers. Recently, very promising results have been obtained in the AEMWE technology. This review paper is focused on recent advances in membrane electrode assembly components, paying particular attention to the preparation methods for catalyst coated on gas diffusion layers, which has not been previously reported in the literature for this type of electrolyzers. The most successful methodologies utilized for the preparation of catalysts, including co-precipitation, electrodeposition, sol–gel, hydrothermal, chemical vapor deposition, atomic layer deposition, ion beam sputtering, and magnetron sputtering deposition techniques, have been detailed. Besides a description of these procedures, in this review, we also present a critical appraisal of the efficiency of the water electrolysis carried out with cells fitted with electrodes prepared with these procedures. Based on this analysis, a critical comparison of cell performance is carried out, and future prospects and expected developments of the AEMWE are discussed.

The optimization of the catalysts incorporated to the electrodes for anion exchange membrane water electrolysers is a key issue to maximize their performance through the improvement of the oxygen evolution reaction (OER) yield. In this work, we show that the modification of the microstructure and the chemical properties of a mixed copper-cobalt oxide anode may contribute to increase the activity of this reaction. For this purpose, the OER has been systematically studied, either in a half cell or in a membrane electrode assembly configuration, as a function of the load and agglomeration degree of the catalysts used as electrodes, as prepared on a carbon paper support by magnetron sputtering deposition in an oblique angle configuration. Chemical analysis by X-ray absorption spectroscopy and electrochemical analysis by cyclic voltammetry and impedance spectroscopy have shown that cobalt-copper mixed oxide catalysts with a 1.8 Co/Cu atomic ratio and about one micron equivalent thickness maximizes the cell performance. The chemical, structural and microstructural factors controlling the final behaviour of these anodes and accounting for this maximization of the reaction yield are discussed on the basis of these characterization results and as a function of preparation variables of the electrodes and operating conditions of the cell.

In this work, we have developed a new kind of nanocolumnar birefringent Bragg microcavity (BBM) that, tailored by oblique angle deposition, behaves as a selective transducer of volatile organic compounds (VOCs). Unlike the atomic lattice origin of birefringence in anisotropic single crystals, in the BBM, it stems from an anisotropic self-organization at the nanoscale of the voids and structural elements of the layers. The optical adsorption isotherms recorded upon exposure of these nanostructured systems to water vapor and VOCs have revealed a rich yet unexplored phenomenology linked to their optical activity that provides both capacity for vapor identification and partial pressure determination. This photonic response has been reproduced with a theoretical model accounting for the evolution of the form birefringence of the individual layers upon vapor condensation in nanopores and internanocolumnar voids. BBMs that repel water vapor but are accessible to VOCs have been also developed through grafting of their internal surfaces with perfluorooctyltriethoxysilane molecules. These nanostructured photonic systems are proposed for the development of transducers that, operating under environmental conditions, may respond specifically to VOCs without any influence by the degree of humidity of the medium.