The scrape-off layer parallel heat flux decay lengths measured at ST40, a high field, low aspect ratio spherical tokamak, have been observed to bifurcate into two groups. The wide group matches closely with the scale of ion poloidal Larmour radius and follows existing H-mode scalings, while the narrow group falls up to 10 times below scalings, on the scale of ion total Larmour radius. The onset of the narrow scrape-off layer width is observed to be associated with suppressed magnetic fluctuations, suggesting reduced electromagnetic turbulence levels in the SOL.

The scrape-off layer parallel heat flux decay lengths measured at ST40, a high field, low aspect ratio spherical tokamak, have been observed to bifurcate into two groups. The wide group follows established H-mode scalings (ranging between 2 to 8 mm) while the narrow group falls up to 10 times below these scalings (between 0.2 and 0.8 mm), being comparable to the ion total Larmor radius rather than the ion poloidal Larmor radius. The heat flux profiles of the latter group can only be described by a multi-exponential function, rather than the single exponential function convoluted with a Gaussian. The onset of the narrow scrape-off layer width is observed to be associated with suppressed magnetic fluctuations, suggesting reduced electromagnetic turbulence levels in the SOL.

Machine learning models are exceptionally effective in capturing complex non-linear relationships of high-dimensional datasets and making accurate predictions. However, their intrinsic “black-box” nature makes it difficult to interpret them or guarantee “safe behavior” when deployed in high-risk applications such as feedback control, healthcare and finance. This drawback acts as a significant barrier to their wider application across many scientific and industrial domains where the interpretability of the model predictions is as important as accuracy. Leveraging the latest developments in interpretable machine learning, we develop a method to parameterise “black-box” models, effectively transforming them into “grey-box” models. We apply this approach to plasma diagnostics by creating a parameterised synthetic Soft X-Ray imaging - Thomson Scattering diagnostic, which predicts high temporal resolution electron temperature and density profiles from the measured soft X-ray emission. The “grey-box” model predictions are benchmarked against the trained “black-box” models as well as a diverse range of plasma conditions. Our model-agnostic approach can be applied to various machine learning architectures, enabling direct comparisons of model interpretations.

As part of its roadmap to developing commercial fusion plants, Tokamak Energy Ltd. operates the high field spherical tokamak ST40. Studies on this device will help to expand the high field spherical tokamak physics basis by characterizing confinement and the fusion triple product. In support of this, bolometers and broadband and x-ray sensitive diodes can provide information on key energy loss mechanisms of the plasma. These mechanisms include core magnetohydrodynamic activity that deteriorates confinement, such as sawtooth crashes that can be used to characterize relaxations in the q-profile. In addition, combinations of these diagnostics can be used to infer the total radiated power losses and plasma composition. Here, we present results from a new, midplane, tangential, Be-filtered diode with 16 channels spanning the radial extent of the plasma. The system is shown to resolve magnetohydrodynamic instabilities (up to 100 kHz) and be able to provide radiation profiles through tomography. The tomographic inversion routine is compared against other diagnostics on ST40 and provides emissivity measurements across a variety of operating scenarios. Finally, we look ahead to implementing multiple soft x-ray cameras on ST40 and the improvements this will have on the diagnostic capabilities.

ST40 is a compact, high-field (B-T0 <= 2.1T) spherical tokamak (ST) with a mission to expand the physics and technology basis for the ST route to commercial fusion. The ST40 research programme covers confinement and stability; solenoid-free start-up; high-performance operating scenarios; and plasma exhaust. In 2022, ST40 obtained central deuterium ion temperatures of 9.6 +/- 0.4 keV, demonstrating for the first time that pilot plant relevant ion temperatures can be reached in a compact, high-field ST. Analysis of these high-ion temperature plasmas is presented, including a summary of confinement, transport and microstability characteristics, and energetic particle instabilities. Recent scenario development activities have focused on establishing diverted H-mode plasmas across a range of toroidal fields and plasma currents, along with scenarios with high non-inductive current fractions. In future operations, beginning in 2025, a 1 MW dual frequency (104/137 GHz) electron cyclotron (EC) system will be installed to enable the study of EC and electron Bernstein wave plasma start-up and current drive. Predictive modelling of the potential performance of these systems is presented.

Laser-driven ion sources are a rapidly developing technology producing high energy, high peak current beams. Their suitability for applications, such as compact medical accelerators, motivates development of robust acceleration schemes using widely available repetitive ultraintense femtosecond lasers. These applications not only require high beam energy, but also place demanding requirements on the source stability and controllability. This can be seriously affected by the laser temporal contrast, precluding the replication of ion acceleration performance on independent laser systems with otherwise similar parameters. Here, we present the experimental generation of > 60 MeV protons and > 30 MeV u −1 carbon ions from sub-micrometre thickness Formvar foils irradiated with laser intensities > 10 21 Wcm 2 . Ions are accelerated by an extreme localised space charge field ≳30 TVm −1 , over a million times higher than used in conventional accelerators. The field is formed by a rapid expulsion of electrons from the target bulk due to relativistically induced transparency, in which relativistic corrections to the refractive index enables laser transmission through normally opaque plasma. We replicate the mechanism on two different laser facilities and show that the optimum target thickness decreases with improved laser contrast due to reduced pre-expansion. Our demonstration that energetic ions can be accelerated by this mechanism at different contrast levels relaxes laser requirements and indicates interaction parameters for realising application-specific beam delivery.

Ion temperatures of over 100 million degrees Kelvin (8.6 keV) have been produced in the ST40 compact high-field spherical tokamak (ST). Ion temperatures in excess of 5 keV have not previously been reached in any ST and have only been obtained in much larger devices with substantially more plasma heating power. The corresponding fusion triple product is calculated to be n i 0 T i 0 τ E ≈ 6 ± 2 × 10 18 m − 3 keVs . These results demonstrate for the first time that ion temperatures relevant for commercial magnetic confinement fusion can be obtained in a compact high-field ST and bode well for fusion power plants based on the high-field ST.

Real experimental measurements in high-radiation environments often suffer from a high-flux of background noise which can limit the retrieval of the underlying signal. It is important to have an effective method to properly remove unwanted noise from measurement images. Machine learning methods using a multilayer neural network (deep learning) have been shown to be effective for extracting features from images. However, the efficacy of such methods is often restricted by a lack of high-quality training data. Here, we demonstrate the application for noise removal by performing simulations to generate virtual training data for a denoising deep-learning model. We first apply the model to simulations of an electron spectrometer measuring the energy spectra of electron beams accelerated from the interaction of an intense laser with a thin foil. By considering the chi-squared test and image test-indexes, namely the peak signal-to-noise ratio (PSNR) and structural similarity index measure (SSIM), we found our method to be highly effective. We then used the trained model to denoise real experimental measurements of the electron beam spectra from experiments performed at a state-of-the-art high-power laser facility. This application is offered as a new method for effectively removing noise from experimental data in high-flux radiation background environment.

Radiative-shocks induced by laser–cluster interactions are modeled using radiation-hydrodynamic simulations. A good agreement—in both shock velocity and density profiles—is obtained between experiment and simulations, indicating that non-local thermodynamic equilibrium (NLTE) radiative effects are important in the experimental regime examined, particularly at early times (≤30 ns) due to the elevated temperatures (≥35 eV). The enhanced NLTE radiative emission causes the shock to be reduced in amplitude, increased in width, and reduced in propagation velocity, while the amplitude of the radiative precursor is increased. As the density and temperature conditions are relatively modest, this potentially has important implications for the scalings that are used in laboratory–astrophysics to transform between laboratory and astrophysical scales, which do not hold for non-LTE systems.

We report on femtosecond petawatt laser pulses at 0.1 Hz that combine both Ti:sapphire chirped-pulse amplification (CPA) and optical parametric CPA (OPCPA) techniques. High temporal contrast of 10(12) prior to the main pulse of 10 J output energy has been demonstrated with a cleaned high-energy seeded low gain OPCPA pre-amplifier. Intensities as high as 10(22)W/cm(2) on target have been achieved by focusing a wave-front corrected 0.3 PW laser by adaptive optics and reflective-type optics with an f /1.3 off-axis parabolic mirror. We describe the origins of the pre-pulses generated by the post-pulses through non-linear processes and demonstrate the removal of the pre-pulses by switching to optical components with a small wedge angle at our petawatt laser facility. We also briefly introduce some experimental results. Exploration of new regimes in high field science is now possible with the unprecedented laser intensity levels of the J-KAREN-P laser.

Retrieving the spectrum of physical radiation from experimental measurements typically involves using a mathematical algorithm to deconvolve the instrument response function from the measured signal. However, in the field of signal processing known as "Source Separation" (SS), which refers to the process of computationally retrieving the separate source components that generate an overlapping signal on the detector, the deconvolution process can become an ill-posed problem and crosstalk complicates the separation of the individual sources. To overcome this problem, we have designed a magnetic spectrometer for inline electron energy spectrum diagnosis and developed an analysis algorithm using techniques applicable to the problem of SS. An unknown polychromatic electron spectrum is calculated by sparse coding using a Gaussian basis function and an L1 regularization algorithm with a sparsity constraint. This technique is verified by using a specially designed magnetic field electron spectrometer. We use Monte Carlo simulations of the detector response to Maxwellian input energy distributions with electron temperatures of 5.0 MeV, 10.0 MeV, and 15.0 MeV to show that the calculated sparse spectrum can reproduce the input spectrum with an optimum energy bin width automatically selected by the L1 regularization. The spectra are reproduced with a high accuracy of less than 4.0% error, without an initial value. The technique is then applied to experimental measurements of intense laser accelerated electron beams from solid targets. Our analysis concept of spectral retrieval and automatic optimization of energy bin width by sparse coding could form the basis of a novel diagnostic method for spectroscopy.

The interaction of high-intensity laser pulses with solid targets can be used as a highly charged, energetic heavy ion source. Normally, intrinsic contaminants on the target surface suppress the performance of heavy ion acceleration from a high-intensity laser–target interaction, resulting in preferential proton acceleration. Here, we demonstrate that CW laser heating of 5 µm titanium tape targets can remove contaminant hydrocarbons in order to expose a thin oxide layer on the metal surface, ideal for the generation of energetic oxygen beams. This is demonstrated by irradiating the heated targets with a PW class high-power laser at an intensity of 5 × 1021 W/cm2, showing enhanced acceleration of oxygen ions with a non-thermal-like distribution. Our new scheme using a CW laser-heated Ti tape target is promising for use as a moderate repetition energetic oxygen ion source for future applications.

Electron heating and ion acceleration in ultrarelativistic laser-solid interactions N. P. Dover1, M. Nishiuchi1,2, H. Sakaki1, A. Kon1, Ko. Kondo1, H. F. Lowe1, M. A. Alkhimova3, E. J. Ditter4, O. C. Ettlinger4, A. Ya. Faenov5,3, M. Hata6, G. S. Hicks4, N. Iwata6, H. Kiriyama1, J. K. Koga1, T. Miyahara1,7, T. Miyatake1,7, Z. Najmudin4, T. A. Pikuz5,3, A. S. Pirozhkov1, T. Pueschel8, A. Sagisaka1, U. Schramm8, Y. Sentoku6, K. Shiokawa1,7, Y. Watanabe7, T. Ziegler8, K. Zeil8, M. Kando1, K. Kondo1 1) Kansai Photon Science Institute, QST, 2) PRESTO, JST, 3) Joint Institute for High Temperatures, Russian Academy of Sciences, 4) John Adams Institute for Accelerator Science, Imperial College London, 5) Open and Transdisciplinary Research Initiative, Osaka University, 6) Institute of Laser Engineering, Osaka University, 7) Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, 8) Helmholtz-Zentrum Dresden-Rossendorf e-mail (speaker): nickdover@gmail.com

High power laser systems are an attractive driver for compact energetic ion sources. We demonstrate repetitive acceleration at 0.1 Hz of proton beams up to 40 MeV from a reeled tape target irradiated by ultra-high intensities up to 5 x 10(21) Wcm(-2) and laser energies approximate to 15 J using the J-KAREN-P laser system. We investigate the stability of the source and its behaviour with laser spot focal size. We compare the scaling of proton energy with laser energy to a recently developed analytical model, and also demonstrate that it is possible to reach energies up to 50 MeV on a single shot with a lower laser energy approximate to 10 J by using a thinner target, motivating development of high repetition targetry suitable for thinner targets.

Motivated by the development of next-generation heavy-ion sources, we have investigated the ionization and acceleration dynamics of an ultraintense laser-driven high-Z silver target, experimentally, numerically, and analytically. Using a novel ion measurement technique allowing us to uniquely identify silver ions, we experimentally demonstrate generation of highly charged silver ions (Z* = 45(-2)(+2)) with energies of >20 MeV/nucleon (>2.2 GeV) from submicron silver targets driven by a laser with intensity 5 x 10(21) W/cm(2), with increasing ion energy and charge state for decreasing target thickness. We show that although target pre-expansion by the unavoidable rising edge of state-of-the-art high-power lasers can limit proton energies, it is advantageous for heavy-ion acceleration. Two-dimensional particle-in-cell simulations show that the Joule heating in the target bulk results in a high temperature (similar to 10 keV) solid density plasma, leading to the generation of high flux highly charged ions (Z* = 40(-2)(+2), greater than or similar to 10 MeV/nucleon) via electron collisional ionization, which are extracted and accelerated with a small divergence by an extreme sheath field at the target rear. However, with reduced target thickness this favorable acceleration is degraded due to the target deformation via laser hole boring, which accompanies higher energy ions with higher charge states but in an uncontrollable manner. Our elucidation of the fundamental processes of high-intensity laser-driven ionization and ion acceleration provides a path for improving the control and parameters of laser-driven heavy-ion sources, a key component for next-generation heavy-ion accelerators.

We report on the design, construction, and characterisation of a new class of in-vacuo optical levitation trap optimised for use in high-intensity, high-energy laser interaction experiments. The system uses a focused, vertically propagating continuous wave laser beam to capture and manipulate micro-targets by photon momentum transfer at much longer working distances than commonly used by optical tweezer systems. A high speed (10 kHz) optical imaging and signal acquisition system was implemented for tracking the levitated droplets position and dynamic behaviour under atmospheric and vacuum conditions, with ±5 μm spatial resolution. Optical trapping of 10 ± 4 μm oil droplets in vacuum was demonstrated, over timescales of >1 h at extended distances of ∼40 mm from the final focusing optic. The stability of the levitated droplet was such that it would stay in alignment with a ∼7 μm irradiating beam focal spot for up to 5 min without the need for re-adjustment. The performance of the trap was assessed in a series of high-intensity (10(17) W cm(-2)) laser experiments that measured the X-ray source size and inferred free-electron temperature of a single isolated droplet target, along with a measurement of the emitted radio-frequency pulse. These initial tests demonstrated the use of optically levitated microdroplets as a robust target platform for further high-intensity laser interaction and point source studies.

We report on the design and testing of a multiwavelength interferometry system for the Orion laser facility based upon the use of self-path matching Wollaston prisms. The use of UV corrected achromatic optics allows for both easy alignment with an eye-safe light source and small (∼ millimeter) offsets to the focal lengths between different operational wavelengths. Interferograms are demonstrated at wavelengths corresponding to first, second, and fourth harmonics of a 1054 nm Nd:glass probe beam. Example data confirms the broadband achromatic capability of the imaging system with operation from the UV (263 nm) to visible (527 nm) and demonstrates that features as small as 5 μm can be resolved for object sizes of 15 by 10 mm. Results are also shown for an off-harmonic wavelength that will underpin a future capability. The primary optics package is accommodated inside the footprint of a ten-inch manipulator to allow the system to be deployed from a multitude of viewing angles inside the 4 m diameter Orion target chamber.