We introduce a novel, gaseous target optical shaping laser set-up, capable to generate short scale length, near-critical target profiles via generated colliding blast waves. These profiles are capable to maintain their compressed density for several nanoseconds, being therefore ideal for laser-plasma particle acceleration experiments in the near critical density plasma regime. Our proposed method overcomes the laser-target synchronization limitations and delivers energetic protons, during the temporal evolution of the optically shaped profile, in a time window of approximately 2.5 ns. The optical shaping of the gas-jet profiles is optimised by MagnetoHydroDynamic simulations. 3D Particle-In-Cell models, adopting the spatiotemporal profile, simulate the 45 TW femtosecond laser plasma interaction to demonstrate the feasibility of the proposed proton acceleration set-up. The optical shaping of gas-jets is performed by multiple, nanosecond laser pulse generated blastwaves. This process results in steep gradient, short scale length plasma profiles, in the near critical density regime allowing operation at high repetition rates. Notably, the Magnetic Vortex Acceleration mechanism exhibits high efficiency in coupling the laser energy into the plasma in the optically shaped targets, resulting to collimated proton beams of energies up to 14 MeV.

The temporal rearrangement of the spectral components of an ultrafast and intense laser pulse, i.e., the chirp of the pulse, offers significant possibilities for controlling its interaction with matter and plasma. In the propagation of ultra-strong laser pulses within the self-induced plasma, laser pulse chirp can play a major role in the dynamics of wakefield and plasma bubble formation, as well as in the electron injection and related electron acceleration. Here, we experimentally demonstrate the control of the generation efficiency of a relativistic electron beam, with respect to maximum electron energy and current, by accurately varying the chirp value of a multi-10-TW laser pulse. We explicitly show that positively chirped laser pulses, i.e., pulses with instantaneous frequency increasing with time, accelerate electrons in the order of 100 MeV much more efficiently in comparison to unchirped or negatively chirped pulses. Corresponding Particle-In-Cell simulations strongly support the experimental results, depicting a smoother plasma bubble density distribution and electron injection conditions that favor the maximum acceleration of the electron beam, when positively chirped laser pulses are used. Our results, aside from extending the validity of similar studies reported for PW laser pulses, provide the ground for understanding the subtle dynamics of an efficient plasma electron accelerator driven by chirped laser pulses.

Ion acceleration in the near-critical density regime is a captivating research area in high-energy physics and plasma physics. High-pressure gas jets have gained popularity as targets for ion acceleration experiments, due to their potential to offer debris-free ion sources that support high repetition rates. The purpose of this research is the design and fabrication of such gas targets for future ion acceleration experiments in the near-critical density regime. The optimization of two nozzle geometries has been studied using the ANSYS Student simulation program. The Computational Fluid Dynamics (CFD) problem is efficiently solved, and the determination of their cubic particle density maps is achieved. In addition, these nozzle geometries were fabricated using 3D printing and characterized in a vacuum environment, using Mach-Zehnder interferometry. These results make a significant contribution to the production of high-pressure gas targets for ion acceleration experiments and offer valuable insights for the design of future experiments.

Laser WakeField Acceleration (LWFA) is extensively used as a high-energy electron source, with electrons achieving energies up to the GeV level. The produced electron beam characteristics depend strongly on the gas density profile. When the gaseous target is a gas jet, the gas density profile is affected by parameters, such as the nozzle geometry, the gas used, and the backing pressure applied to the gas valve. An electron source based on the LWFA mechanism has recently been developed at the Institute of Plasma Physics and Lasers. To improve controllability over the electron source, we developed a set of 3D-printed nozzles suitable for creating different gas density profiles according to the experimental necessities. Here, we present a study of the design, manufacturing, evaluation, and performance of a 3D-printed nozzle intended for LWFA experiments.

This research work emphasizes the capability of delivering optically shaped targets through the interaction of nanosecond laser pulses with high-density gas-jet profiles, and explores proton acceleration in the near-critical density regime via magnetic vortex acceleration（MVA）. Multiple blast waves（BWs） are generated by laser pulses that compress the gas-jet into near-critical steep gradient slabs of a few micrometres thickness. Geometrical alternatives for delivering the laser pulses into the gas target are explored to efficiently control the characteristics of the density profile. The shock front collisions of the generated BWs are computationally studied by 3D magnetohydrodynamic simulations. The efficiency of the proposed target shaping method for MVA is demonstrated for TW-class lasers by a particle-in-cell simulation.

The generation of laser based relativistic electron sources involves impressive basic science as well as innovative applications. This study reports first novel qualitative results on polymer-gel radiation dosimetry of ultrafast laser-based relativistic electron beams. The fabricated polymer-gels are irradiated by the ultra-high dose rate (FLASH) laser-generated electron beams and then are analysed using magnetic resonance imaging. The reading of the irradiated dosimeters is performed using a clinical 1.5 T Magnetic Resonance Imaging system. Three-dimensional colour parametric T2 maps are then constructed from the original PD-T2 weighted images obtained from the clinical MRI scanner. For comparison, the gels are also irradiated with standard electron beams of various energies utilizing a radiotherapy clinical linear accelerator system. For the calibration measurements of the gel dosimetry method, special calibrated dosimetric films are also implemented. The preliminary results demonstrate the potential of polymer gel dosimetry for 3D-dose-distribution of FLASH type irradiation of laser generated electron beams. Furthermore, they illustrate potential issues related to the polymer gel based dosimetry in challenging irradiation arrangements, such as the oxygen sensitivity and necessity for oxygen impermeable container material.

The rapid development of high-intensity laser-generated particle and photon secondary sources has attracted widespread interest during the last 20 years not only due to fundamental science research but also because of the important applications of this developing technology. For instance, the generation of relativistic particle beams, betatron-type coherent X-ray radiation and high harmonic generation have attracted interest from various fields of science and technology owing to their diverse applications in biomedical, material science, energy, space, and security applications. In the field of biomedical applications in particular, laser-driven particle beams as well as laser-driven X-ray sources are a promising field of study. This article looks at the research being performed at the Institute of Plasma Physics and Lasers (IPPL) of the Hellenic Mediterranean University Research Centre. The recent installation of the ZEUS 45 TW laser system developed at IPPL offers unique opportunities for research in laser-driven particle and X-ray sources. This article provides information about the facility and describes initial experiments performed for establishing the baseline platforms for secondary plasma sources.

The deposition of femtosecond laser optical energy in gases leads to the emission of secondary electromagnetic and acoustic radiation. These optoacoustic components have a complex nonlinear dependency on the laser beam characteristics, such as the pulse energy, duration, wavelength and the focusing conditions, as well as on the optical and elastic characteristics of the gaseous medium. The initial interaction times are governed by the high electronic excitation and ionization. These phenomena result in a self-modulation of the laser pulse, significantly affecting the optical energy deposition on the medium. Such complex nonlinear phenomena are very difficult to be studied via analytical equations. To address this, a multiphysics Particle-In-Cell model is applied for the evaluation of the optical energy deposition and plasma generation from tightly focused femtosecond pulses in ambient air. The computational domain of the model is built to describe optical energy deposition in its full spatiotemporal scale. The model is validated by experimental results of the absorbed energy. The agreement between the computational and experimental results provides the basis for the future development of an advanced microstructural Finite Element Method model, which, combined with the Particle-In-Cell model, will have the ability of delivering detailed insights for all the sub-domains and timescales varying from nano- to femto-seconds of the laser-induced breakdown phenomenon.

We present an integrated study on the scalability and performance of particle-in-cell (PIC) code simulations on CPU and GPU architectures of high parallelization focused on target normal sheath acceleration (TNSA) and laser wakefield acceleration (LWFA) experiments. The developed models follow the experimental specifications of the high-power lasers systems hosted at the infrastructures of the Institute of Plasma Physics & Lasers of the Hellenic Mediterranean University in Crete, Greece and the Extreme Light Infrastructure - Nuclear Physics in Romania. The simulations are implemented on the High-Performance Computer for Advanced Research Information System of the Greek National Infrastructures for Research and Technology. Two representative experiments for TNSA and for LWFA are initially simulated by 2D models with the minimum computational resource demands and the results are used as a reference for the scalability and performance investigation. We further extend our study to 3D models aiming to reproduce the physics involved in both laser-plasma particle accelerators. A detailed analysis of the simulation results, accompanied with the computational demands, scalability and performance of the CPU and the GPU architectures, is provided. Our research findings highlight the key features and parameters of the physical and numerical models which drive simulations to converge to reliable results by means of physics, computational and runtime demands and shed light on their influence on the efficiency and performance of the PIC simulations.

The Heat Affected Zone - HAZ of a laser irradiated AISI H-13 steel workpiece, is investigated via numerical simulations and experimental measurements. A three-dimensional transient thermo-structural finite element model is developed to simulate the machining process. A Gaussian laser beam is employed as the heat source. The developed finite element material model considers the effects of plastic strain, strain rate and temperature, along with a fracture model. The experiments are carried out with a laser of 1-4 W power and with a scanning speed of 100 mm/min. Thermocouple sensors are used for the temperature measurements, while the surface roughness is measured using white light interferometry and related experimental diagnostics. A parametric numerical analysis regarding the average absorptivity of the workpiece is performed and is compared to the experimental findings. The depth and width of HAZ and the induced strains are studied for the plastic and melting regimes. The influence of the surface roughness of the metal workpiece on the dynamics of HAZ is also experimentally demonstrated. The findings of this study highlight the role of the absorption coefficient and the surface roughness on the HAZ below the ablation threshold and can be applied to related laser machining processes.

The second and final year of the Erasmus Plus programme ’Innovative Education and Training in high power laser plasmas’, otherwise known as PowerLaPs, is described. The PowerLaPs programme employs an innovative paradigm in that it is a multi-centre programme, where teaching takes place in five separate institutes with a range of different aims and styles of delivery. The ’in-class’ time is limited to 4 weeks a year, and the programme spans 2 years. PowerLaPs aims to train students from across Europe in theoretical, applied and laboratory skills relevant to the pursuit of research in laser plasma interaction physics and inertial confinement fusion. Lectures are intermingled with laboratory sessions and continuous assessment activities. The programme, which is led by workers from the Hellenic Mediterranean University and supported by co-workers from the Queen’s University Belfast, the University of Bordeaux, the Czech Technical University in Prague, Ecole Polytechnique, the University of Ioannina, the University of Salamanca and the University of York, has just finished its second and final year. Six Learning Teaching Training activities have been held at the Queen’s University Belfast, the University of Bordeaux, the Czech Technical University, the University of Salamanca and the Institute of Plasma Physics and Lasers of the Hellenic Mediterranean University. The last of these institutes hosted two 2-week-long Intensive Programmes, while the activities at the other four universities were each 5 days in length. In addition, a ’Multiplier Event’ was held at the University of Ioannina, which will be briefly described. In this second year,the work has concentrated on training in both experimental diagnostics and simulation techniques appropriate to the study of plasma physics, high power laser matter interactions and high energy density physics. The nature of the programme will be described in detail, and some metrics relating to the activities carried out will be presented. In particular, this paper will focus on the overall assessment of the programme.