An on-detector power distribution scheme for the High Granularity Calorimeter (HGCAL) Phase-2 upgrade of CMS is under development. This scheme is based on a heavy-copper flexible printed circuit board (FPC), allowing for an efficient use of the tight integration space, with minimal insulation overhead, excellent electrical and thermal performance and simplified integration, when compared with a wired solution. This work introduces the technology, how it allows the HGCAL challenges to be overcome, and the characterization studies. Prototypes testing are presented to validate the concept and quantify the manufacturability, electrical performance, and safety of the proposed solution.

The observed enhancement of low-kT photons in comparison with incorrect calculations, should not be treated as a puzzle. The paper by Low considered a large rapidity gap process of diffractive excitation of a hadron, h -> h+\gamma, rather than multiple hadron production spanning all over the rapidity interval between colliding hadrons. The optical theorem connects these two processes, and what is inner bremsstrahlung, suppressed according to Low, corresponds to radiation from final state hadrons. Thus, the main result of the Low theorem, based on gauge invariance of the diffractive bremsstrahlung amplitude, supplemented with the optical theorem, contradicts the so-called bremsstrahlung model. The latter has been used for comparison with data, leading to the longstanding soft photon puzzle.

The relation of the pole and running heavy quark masses of the order of $\mathcal {O}\left(\alpha _s<<^>>4\right)$ in perturbative quantum chromodynamics (pQCD) can be obtained using the principle of maximum conformality (PMC), a formalism that provides a rigorous method for eliminating renormalization scale and scheme ambiguities for observables in pQCD. Using PMC, optimal renormalization scale for the heavy quark mass ratio is determined, independent of the renormalization scale and scheme up to order $\alpha _s<<^>>4$. Precise values are then obtained for the PMC pole masses of the heavy quarks $M_b<<^>>{\text{PMC}}=4.86<<^>>{+0.03}_{-0.02}$ GeV, $M_t<<^>>{\text{PMC}}=172.3\pm 0.6$ GeV, and the running mass $\overline{m}_t<<^>>{\text{PMC}}=162.6\pm 0.7$ GeV at the PMC scale.

This paper describes the experience with the calibration, reconstruction and evaluation of the timing capabilities of the CMS HGCAL prototype in the beam tests in 2018. The calibration procedure includes multiple steps and corrections ranging from tens of nanoseconds to a few hundred picoseconds. The timing performance is studied using signals from positron beam particles with energies between 20 GeV and 300 GeV. The performance is studied as a function of particle energy against an external timing reference as well as standalone by comparing the two different halves of the prototype. The timing resolution is found to be 60 ps for single-channel measurements and better than 20 ps for full showers at the highest energies, setting excellent perspectives for the HGCAL calorimeter performance at the HL-LHC.

We built an extended 2HDM theory with a spontaneously broken $U(1) _{X}$ global symmetry, where the tree level Universal Seesaw Mechanism generates the mass hierarchy of the Standard Model charged fermions and the Zee-Babu mechanism produces tiny active neutrino masses. The third family of SM charged fermions gets tree level masses from Yukawa interactions involving the Higgs doublets $H_1$ (for the top quark) and $H_2$ (for the bottom quark and tau lepton). The model under consideration is consistent with SM fermion masses and mixings, with the muon and electron $g-2$ anomalies and successfully accommodates the constraints arising from charged lepton flavor violation and meson oscillations. The proposed model predicts rates for charged lepton flavor violating decays within the reach of forthcoming experiments.

The renormalization group equations of massive $\mathcal {N}=1$ supersymmetric quantum electrodynamics are studied using the functional renormalization group approach. A non-perturbative form of the beta function has been computed via a derivative expansion of the effective action. In the local potential approximation, the functional form of the non-perturbative beta function is closely related to the form of the Novikov-Shifman-Vainshtein-Zakharov (NSVZ) exact beta function; this relationship is exact if an effective fine-structure constant is defined. The non-massive limit of the same is also analyzed. Furthermore, the calculation of the beta function has been improved by incorporating the influence of momentum modes on the propagation of the superfields in the non-perturbative running of the electric charge, applying a second-order truncation for the derivative expansion, which we use to find the momentum contributions to the beta function. Again, we find the NSVZ relation for an effective fine-structure constant.It is with sadness that I say goodbye to my professor, Ivan Schmidt Andrade, who left us during the course of this work. His passion for research and his special vision of physics work will remain with us. Thank you for everything.

We propose two versions of radiative linear seesaw models, where electrically charged scalars and vector-like leptons generate the Dirac neutrino mass submatrix at one and two loop levels. In these models, the SM charged lepton masses are generated from a one loop level radiative seesaw mechanism mediated by charged exotic vector-like leptons and electrically neutral scalars running in the loops. These models can successfully accommodate the current amount of dark matter and baryon asymmetries observed in the Universe, as well as the muon anomalous magnetic moment.

For the High-Luminosity (HL-LHC) phase, the upgrade of the Compact Muon Solenoid (CMS) experiment at CERN will include a novel MIP Timing Detector (MTD). The central part of MTD, the barrel timing layer (BTL), is designed to provide a measurement of the time of arrival of charged particles with a precision of 30 ps at the beginning of HL-LHC, progressively degrading to 60 ps while operating in an extremely harsh radiation environment for over a decade. In this paper we present a comparative analysis of the time resolution of BTL module prototypes made of LYSO:Ce crystal bars read out by silicon photo-multipliers (SiPMs). The timing performance measured in beam test campaigns is presented for prototypes with different construction and operation parameters, such as different SiPM cell sizes (15, 20, 25 and 30 mu m), SiPM manufacturers and crystal bar thicknesses. The evolution of time resolution as a function of the irradiation level has been studied using non-irradiated SiPMs as well as SiPMs exposed up to 2 x 1014 neq/cm2 fluence. The key parameters defining the module time resolution such as SiPM characteristics (gain, photon detection efficiency, radiation induced dark count rate) and crystal properties (light output and dimensions) are discussed. These results have informed the final choice of the MTD barrel sensor configuration and offer a unique starting point for the design of future large-area scintillator-based timing detectors in either low or high radiation environments.

We propose two models based on the SU(3) x SU(3)L x U(1)X gauge symmetry, each incorporating distinct inverse seesaw mechanisms for generating neutrino masses at the radiative level. Therefore, neutrino masses are suppressed by the radiative nature of the mass generation mechanism, which occurs after the spontaneous breaking of the global lepton number symmetry. Both scenarios discussed here are characterized by the presence of vectorlike charged leptons, which are involved in generating the masses of the Standard Model charged leptons. These additional vectorlike fermions also contribute to the anomalous magnetic moments of the muon. We perform a detailed analysis of the scalar sectors, show that these models can successfully accommodate the observed baryon asymmetry through resonant leptogenesis, and compute the rates of charged lepton flavor-violating decays, such as mu -> e gamma. We discuss the constraints of the model arising from these processes and those associated with the nonunitarity of the lepton mixing matrix.

A novel method to reconstruct the energy of hadronic showers in the CMS High Granularity Calorimeter (HGCAL) is presented. The HGCAL is a sampling calorimeter with very fine transverse and longitudinal granularity. The active media are silicon sensors and scintillator tiles readout by SiPMs and the absorbers are a combination of lead and Cu/CuW in the electromagnetic section, and steel in the hadronic section. The shower reconstruction method is based on graph neural networks and it makes use of a dynamic reduction network architecture. It is shown that the algorithm is able to capture and mitigate the main effects that normally hinder the reconstruction of hadronic showers using classical reconstruction methods, by compensating for fluctuations in the multiplicity, energy, and spatial distributions of the shower's constituents. The performance of the algorithm is evaluated using test beam data collected in 2018 prototype of the CMS HGCAL accompanied by a section of the CALICE AHCAL prototype. The capability of the method to mitigate the impact of energy leakage from the calorimeter is also demonstrated.

Abstract We propose an extended Left-Right symmetric model with an additional global U(1)X symmetry, which collapses to a residual subgroup ℤ2 after spontaneous symmetry breaking. In this model, the light active neutrino masses are generated via a double seesaw mechanism with the Dirac submatrix arising at one loop. In addition, the masses of the charged fermions of the Standard Model (SM) that are lighter than the top quark are generated at one loop level and the residual ℤ2 symmetry ensures the stability of the Dark Matter (DM) candidate of the model. To the best of our knowledge our model has the first implementation of the radiative double seesaw mechanism with the Dirac submatrix generated at one loop level. We show that the model can successfully account for the observed pattern of the SM fermion masses and mixing, and that it is compatible with constraints arising from the muon g-2 anomaly, neutrinoless double beta decay and DM.

Absorptive corrections, which are known to suppress proton-neutron transitions with a large fractional momentum z→1 in pp collisions, become dramatically strong on a nuclear target, and they push the partial cross sections of leading neutron production to the very periphery of the nucleus. The mechanism of the pion π and axial vector meson a1 interference, which successfully explains the observed single-spin asymmetry in a polarized pp→nX, is extended to the collisions of polarized protons with nuclei. When corrected for nuclear effects, it explains the observed single-spin azimuthal asymmetry of neutrons that is produced in inelastic events, which is where the nucleus violently breaks up. This single-spin asymmetry is found to be negative and nearly atomic mass number A-independent.

We apply the functional renormalization group approach to a 𝒩=1 supersymmetric gauge model with one chiral superfield coupled to a vector U (1) superfield. We find that the nonrenormalization theorem still works at leading order in the supercovariant derivative expansion of the fields. We also find the beta functions and we study the behavior of its fixed points in the local potential approximation. Regulators are also discussed.

A correction to this paper has been published: https://doi.org/10.1007/JHEP05(2023)054

Abstract We apply the functional renormalization group approach to a $$\mathcal {N}=1$$ N = 1 supersymmetric gauge model with one chiral superfield coupled to a vector U(1) superfield. We find that the nonrenormalization theorem still works at leading order in the supercovariant derivative expansion of the fields. We also find the beta functions and we study the behavior of its fixed points in the local potential approximation. Regulators are also discussed.

The upgrade of the CMS experiment for the high luminosity operation of the LHC comprises the replacement of the current endcap calorimeter by a high granularity sampling calorimeter (HGCAL). The electromagnetic section of the HGCAL is based on silicon sensors interspersed between lead and copper (or copper tungsten) absorbers. The hadronic section uses layers of stainless steel as an absorbing medium and silicon sensors as an active medium in the regions of high radiation exposure, and scintillator tiles directly readout by silicon photomultipliers in the remaining regions. As part of the development of the detector and its readout electronic components, a section of a silicon-based HGCAL prototype detector along with a section of the CALICE AHCAL prototype was exposed to muons, electrons and charged pions in beam test experiments at the H2 beamline at the CERN SPS in October 2018. The AHCAL uses the same technology as foreseen for the HGCAL but with much finer longitudinal segmentation. The performance of the calorimeters in terms of energy response and resolution, longitudinal and transverse shower profiles is studied using negatively charged pions, and is compared to GEANT4 predictions. This is the first report summarizing results of hadronic showers measured by the HGCAL prototype using beam test data.

In this paper we analyze the exclusive photoproduction of heavy quarkonia pairs in the collinear factorization framework. We evaluate the amplitude of the process for $J/\psi\,-\eta_{c}$ quarkonia pair in the leading order of the strong coupling $\alpha_{s},$ and express it in terms of generalized parton distributions (GPDs) of gluons in the proton. We made numerical estimates in the kinematics of the Electron Ion Collider, and found that in the photoproduction regime, when the virtuality of the photon is much smaller than the quarkonia mass, the cross-section of the process is sufficiently large for experimental studies. We demonstrate that the study of this channel can complement existing studies of gluon GPDs from other channels.

In these proceedings we present our results on the exclusive photoproduction of J/ψ η_c pairs in the collinear factorization framework. We argue that the process might be used as a complementary channel for studying the generalized parton distributions (GPDs) of gluons. We provide numerical estimates for the cross-section in the kinematics of the future Electron Ion Collider.

The barrel section of the novel MIP Timing Detector (MTD) will be constructed as part of the upgrade of the CMS experiment to provide a time resolution for single charged tracks in the range of 30–60 ps using LYSO:Ce crystal arrays read out with Silicon Photomultipliers (SiPMs). A major challenge for the operation of such a detector is the extremely high radiation level, of about 2 × 10 14 1 MeV(Si) Eqv. n/cm 2 , that will be integrated over a decade of operation of the High Luminosity Large Hadron Collider (HL-LHC). Silicon Photomultipliers exposed to this level of radiation have shown a strong increase in dark count rate and radiation damage effects that also impact their gain and photon detection efficiency. For this reason during operations the whole detector is cooled down to about -35°C. In this paper we illustrate an innovative and cost-effective solution to mitigate the impact of radiation damage on the timing performance of the detector, by integrating small thermo-electric coolers (TECs) on the back of the SiPM package. This additional feature, fully integrated as part of the SiPM array, enables a further decrease in operating temperature down to about -45°C. This leads to a reduction by a factor of about two in the dark count rate without requiring additional power budget, since the power required by the TEC is almost entirely offset by a decrease in the power required for the SiPM operation due to leakage current. In addition, the operation of the TECs with reversed polarity during technical stops of the accelerator can raise the temperature of the SiPMs up to 60°C (about 50°C higher than the rest of the detector), thus accelerating the annealing of radiation damage effects and partly recovering the SiPM performance.

We argue in favor of the independence on any scale, ultraviolet or infrared, in kernels of the effective action expressed in terms of dressed N=1 superfields for the case of N=4 super-Yang–Mills theory. Under “scale independence” of the effective action of dressed mean superfields, we mean its “finiteness in the off-shell limit of removing all the regularizations”. This off-shell limit is scale independent because no scale remains inside these kernels after removing the regularizations. We use two types of regularization: regularization by dimensional reduction and regularization by higher derivatives in its supersymmetric form. Based on the Slavnov–Taylor identity, we show that dressed fields of matter and of vector multiplets can be introduced to express the effective action in terms of them. Kernels of the effective action expressed in terms of such dressed effective fields do not depend on the ultraviolet scale. In the case of dimensional reduction, by using the developed technique, we show how the problem of inconsistency of the dimensional reduction can be solved. Using Piguet and Sibold formalism, we indicate that the dependence on the infrared scale disappears off shell in both the regularizations.