Unlike other quantum hardware, photonic quantum architectures can produce millions of qubits from a single device. However, controlling photonic qubits remains challenging, even at small scales, due to their weak interactions, making non-deterministic gates in linear optics unavoidable. Nevertheless, a single photon can readily spread over multiple modes and create entanglement within the multiple modes deterministically. Rudolph's concept of third quantization leverages this feature by evolving multiple single-photons into multiple modes, distributing them uniformly and randomly to different parties, and creating multipartite entanglement without interactions between photons or non-deterministic gates. This method requires only classical communication and deterministic entanglement within multi-mode single-photon states and enables universal quantum computing. The multipartite entanglement generated within the third quantization framework is nearly deterministic, where ``deterministic'' is achieved in the asymptotic limit of a large system size. In this work, we propose a near-term experiment using antimony donor in a silicon chip to realize third quantization. Utilizing the eight energy levels of antimony, one can generate two eight-mode single-photon states independently and distribute them to parties. This enables a random multipartite Bell-state experiment, achieving a Bell state with an upper-bound efficiency of 87.5% among 56 random pairs without non-deterministic entangling gates. This approach opens alternative pathways for silicon-based photonic quantum computing.

Masers once represented the state-of-the-art in low noise microwave amplification technology, but eventually became obsolete due to their need for cryogenic cooling. Masers based on solid-state spin systems perform most effectively as amplifiers, since they provide a large density of spins and can therefore operate at relatively high powers. Whilst solid-state masers oscillators have been demonstrated at room temperature, continuous-wave amplification in these systems has only ever been realized at cryogenic temperatures. Here we report on a continuous-wave solid-state maser amplifier operating at room temperature. We achieve this feat using a practical setup that includes an ensemble of nitrogen-vacancy center spins in a diamond crystal, a strong permanent magnet and simple laser diode. We describe important amplifier characteristics including gain, bandwidth, compression power and noise temperature and discuss the prospects of realizing a room-temperature near-quantum-noise-limited amplifier with this system. Finally, we show that in a different mode of operation the spins can be used to cool the system noise in an external circuit to cryogenic levels, all without the requirement for physical cooling.

A quantum-limited amplifier enables the amplification of weak signals while introducing minimal noise dictated by the principles of quantum mechanics. These amplifiers serve a broad spectrum of applications in quantum computing, including fast and accurate readout of superconducting qubits and spins, as well as various uses in quantum sensing and metrology. Parametric amplification, primarily developed using Josephson junctions, has evolved into the leading technology for highly effective microwave measurements within quantum circuits. Despite their significant contributions, these amplifiers face fundamental limitations, such as their inability to handle high powers, sensitivity to parasitic magnetic fields, and particularly their limitation to operate only at millikelvin temperatures. To tackle these challenges, here we experimentally develop a novel quantum-limited amplifier based on superconducting kinetic inductance and present an extensive theoretical model to describe this nonlinear coupled-mode system. Our device surpasses the conventional constraints associated with Josephson junction amplifiers by operating at much higher temperatures up to 4.5 K. With two distinct spectral modes and tunability through bias current, this amplifier can operate selectively in both single and double-mode amplification regimes near the quantum noise limit. Utilizing a nonlinear thin film exhibiting kinetic inductance, our device attains gain exceeding 50 dB in a single-mode and 32 dB in a double-mode configuration while adding 0.35 input-referred quanta of noise. Importantly, this amplifier eliminates the need for Josephson junctions, resulting in significantly higher power handling capabilities than Josephson-based amplifiers. It also demonstrates resilience in the presence of magnetic fields, offers a straightforward design, and enhances reliability.

Squeezed states of light have been used extensively to increase the precision of measurements, from the detection of gravitational waves to the search for dark matter. In the optical domain, high levels of vacuum noise squeezing are possible due to the availability of low loss optical components and high-performance squeezers. At microwave frequencies, however, limitations of the squeezing devices and the high insertion loss of microwave components makes squeezing vacuum noise an exceptionally difficult task. Here we demonstrate a new record for the direct measurement of microwave squeezing. We use an ultra low loss setup and weakly-nonlinear kinetic inductance parametric amplifiers to squeeze microwave noise 7.8(2) dB below the vacuum level. The amplifiers exhibit a resilience to magnetic fields and permit the demonstration of record squeezing levels inside fields of up to 2 T. Finally, we exploit the high critical temperature of our amplifiers to squeeze a warm thermal environment, achieving vacuum level noise at a temperature of 1.8 K. These results enable experiments that combine squeezing with magnetic fields and permit quantum-limited microwave measurements at elevated temperatures, significantly reducing the complexity and cost of the cryogenic systems required for such experiments.

When strongly pumped at twice their resonant frequency, nonlinear resonators develop a high-amplitude intracavity field, a phenomenon known as parametric self-oscillations. The boundary over which this instability occurs can be extremely sharp and thereby presents an opportunity for realizing a detector. Here, we operate such a device based on a superconducting microwave resonator whose nonlinearity is engineered from kinetic inductance. The device indicates the absorption of low-power microwave wavepackets by transitioning to a self-oscillating state. Using calibrated pulses, we measure the detection efficiency to zeptojoule energy wavepackets. We then apply it to measurements of electron spin resonance, using an ensemble of209Bi donors in silicon that are inductively coupled to the resonator. We achieve a latched readout of the spin signal with an amplitude that is five hundred times greater than the underlying spin echoes.

The spins of atoms and atom-like systems are among the most coherent objects in which to store quantum information. However, the need to address them using oscillating magnetic fields hinders their integration with quantum electronic devices. Here, we circumvent this hurdle by operating a single-atom “flip-flop” qubit in silicon, where quantum information is encoded in the electron-nuclear states of a phosphorus donor. The qubit is controlled using local electric fields at microwave frequencies, produced within a metal-oxide-semiconductor device. The electrical drive is mediated by the modulation of the electron-nuclear hyperfine coupling, a method that can be extended to many other atomic and molecular systems and to the hyperpolarization of nuclear spin ensembles. These results pave the way to the construction of solid-state quantum processors where dense arrays of atoms can be controlled using only local electric fields.

The use of superconducting microresonators together with quantum-limited Josephson parametric amplifiers has enhanced the sensitivity of pulsed electron spin resonance (ESR) measurements by more than four orders of magnitude. So far, the microwave resonators and amplifiers have been designed as separate components due to the incompatibility of Josephson junction–based devices with magnetic fields. This has produced complex spectrometers and raised technical barriers toward adoption of the technique. Here, we circumvent this issue by coupling an ensemble of spins directly to a weakly nonlinear and magnetic field–resilient superconducting microwave resonator. We perform pulsed ESR measurements with a 1-pL mode volume containing 6 × 10 7 spins and amplify the resulting signals within the device. When considering only those spins that contribute to the detected signals, we find a sensitivity of 2.8 × 1 0 3 spins / Hz for a Hahn echo sequence at a temperature of 400 mK. In situ amplification is demonstrated at fields up to 254 mT, highlighting the technique’s potential for application under conventional ESR operating conditions.

Silicon spin qubits promise to leverage the extraordinary progress in silicon nanoelectronic device fabrication over the past half century to deliver large-scale quantum processors. Despite the scalability advantage of using silicon technology, realising a quantum computer with the millions of qubits required to run some of the most demanding quantum algorithms poses several outstanding challenges, including how to control many qubits simultaneously. Recently, compact 3D microwave dielectric resonators were proposed as a way to deliver the magnetic fields for spin qubit control across an entire quantum chip using only a single microwave source. Although spin resonance of individual electrons in the globally applied microwave field was demonstrated, the spins were controlled incoherently. Here we report coherent Rabi oscillations of single electron spin qubits in a planar SiMOS quantum dot device using a global magnetic field generated off-chip. The observation of coherent qubit control driven by a dielectric resonator establishes a credible pathway to achieving large-scale control in a spin-based quantum computer.

Quantum computing, communications, sensing, and simulations are radically transformative technologies, with great potential to impact industries and economies. Worldwide, national governments, industries, and universities are moving to create a new class of workforce—the Quantum Engineers. Demand for such engineers is predicted to be in the tens of thousands within a five-year timescale, far exceeding the rate at which the world’s universities can produce Ph.D. graduates in the discipline. How best to train this next generation of engineers is currently a matter of debate. Quantum mechanics—long a pillar of traditional physics undergraduate degrees—must now be merged with traditional engineering offerings. This article discusses the history, development, and the first year of operation of the world’s first undergraduate degree in quantum engineering to be grown out of an engineering curriculum. The main purpose of this article is to inform the wider discussion, now being held by many institutions worldwide, on how best to formally educate the Quantum Engineer.

Raw data and analysis for arXiv:2211.11333

The negatively charged nitrogen-vacancy (NV−) center in diamond is a model quantum system for university teaching labs due to its room-temperature compatibility and cost-effective operation. Based on the low-cost experimental setup that we have developed and described for the coherent control of the electronic spin [Sewani et al., Am. J. Phys. 88, 1156–1169 (2020)], we introduce and explain here a number of more advanced experiments that probe the electron–nuclear interaction between the NV− electronic and the 14N and 13C nuclear spins. Optically detected magnetic resonance, Rabi oscillations, Ramsey fringe experiments, and Hahn echo sequences are implemented to demonstrate how the nuclear spins interact with the electron spins. Most experiments only require 15 min of measurement time and, therefore, can be completed within one teaching lab.

A new quantum random-access memory device reads and writes information using a chirped electromagnetic pulse and a superconducting resonator, making it significantly more hardware-efficient than previous devices.

Degenerate parametric amplifiers (DPAs) exhibit the unique property of phase-sensitive gain and can be used to noiselessly amplify small signals or squeeze field fluctuations beneath the vacuum level. In the microwave domain, these amplifiers have been utilized to measure qubits in elementary quantum processors, search for dark matter, facilitate high-sensitivity spin resonance spectroscopy and have even been proposed as the building blocks for a measurement based quantum computer. Until now, microwave DPAs have almost exclusively been made from nonlinear Josephson junctions, which exhibit high-order nonlinearities that limit their dynamic range and squeezing potential. In this work we investigate a new microwave DPA that exploits a nonlinearity engineered from kinetic inductance. The device has a simple design and displays a dynamic range that is four orders of magnitude greater than state-of-the-art Josephson DPAs. We measure phase sensitive gains up to 50 dB and demonstrate a near-quantum-limited noise performance. Additionally, we show that the higher-order nonlinearities that limit other microwave DPAs are almost non-existent for this amplifier, which allows us to demonstrate its exceptional squeezing potential by measuring the deamplification of coherent states by as much as 26 dB.

Electron spins are amongst the most coherent solid-state systems known. However, to be used in devices for quantum sensing and information processing applications, they must typically be placed near interfaces. Understanding and mitigating the impacts of such interfaces on the coherence and spectral properties of electron spins is critical to realizing such applications, but it is also challenging: Inferring such data from single-spin studies requires many measurements to obtain meaningful results, while ensemble measurements typically give averaged results that hide critical information. Here, we report a comprehensive study of the coherence of near-surface bismuth donor spins in 28-silicon at millikelvin temperatures. In particular, we use strain-induced frequency shifts caused by a metallic electrode to infer spatial maps of spin coherence as a function of position relative to the electrode. By measuring magnetic-field-insensitive clock transitions, we separate magnetic noise caused by surface spins from charge noise. Our results include quantitative models of the strain-split spin resonance spectra and extraction of paramagnetic impurity concentrations at the silicon surface. The interplay of these decoherence mechanisms for such near-surface electron spins is critical for their application in quantum technologies, while the combination of the strain splitting and clock transition extends the coherence lifetimes by up to 2 orders of magnitude, reaching up to 300 ms at a mean depth of only 100 nm. The technique we introduce here to spatially map coherence in near-surface ensembles is directly applicable to other spin systems of active interest, such as defects in diamond, silicon carbide, and rare earth ions in optical crystals.

Yang Yang, 2, ∗ Hyma H. Vallabhapurapu, Vikas K. Sewani, Hannes R. Firgau, Chris Adambukulam, Brett C. Johnson, Jarryd J. Pla, and Arne Laucht † School of Electrical Engineering and Telecommunications, The University of New South Wales, Sydney, NSW 2052, Australia Quantum Photonics Laboratory and Centre for Quantum Computation and Communication Technology, School of Engineering, RMIT University, Melbourne, Victoria 3000, Australia

Quantum phenomena are typically observable at length and time scales smaller than those of our everyday experience, often involving individual particles or excitations. The past few decades have seen a revolution in the ability to structure matter at the nanoscale, and experiments at the single particle level have become commonplace. This has opened wide new avenues for exploring and harnessing quantum mechanical effects in condensed matter. These quantum phenomena, in turn, have the potential to revolutionize the way we communicate, compute and probe the nanoscale world. Here, we review developments in key areas of quantum research in light of the nanotechnologies that enable them, with a view to what the future holds. Materials and devices with nanoscale features are used for quantum metrology and sensing, as building blocks for quantum computing, and as sources and detectors for quantum communication. They enable explorations of quantum behaviour and unconventional states in nano- and opto-mechanical systems, low-dimensional systems, molecular devices, nano-plasmonics, quantum electrodynamics, scanning tunnelling microscopy, and more. This rapidly expanding intersection of nanotechnology and quantum science/technology is mutually beneficial to both fields, laying claim to some of the most exciting scientific leaps of the last decade, with more on the horizon.

Spin-based silicon quantum electronic circuits offer a scalable platform for quantum computation, combining the manufacturability of semiconductor devices with the long coherence times afforded by spins in silicon. Advancing from current few-qubit devices to silicon quantum processors with upward of a million qubits, as required for fault-tolerant operation, presents several unique challenges, one of the most demanding being the ability to deliver microwave signals for large-scale qubit control. Here, we demonstrate a potential solution to this problem by using a three-dimensional dielectric resonator to broadcast a global microwave signal across a quantum nanoelectronic circuit. Critically, this technique uses only a single microwave source and is capable of delivering control signals to millions of qubits simultaneously. We show that the global field can be used to perform spin resonance of single electrons confined in a silicon double quantum dot device, establishing the feasibility of this approach for scalable spin qubit control.

Donor spin in silicon have achieved record values of coherence times and single-qubit gate fidelities. The next stage of development involves demonstrating high-fidelity two-qubit logic gates, where the most natural coupling is the exchange interaction. To aid the efficient design of scalable donor-based quantum processors, we model the two-electron wave function using a full configuration interaction method within a multi-valley effective mass theory. We exploit the high computational efficiency of our code to investigate the exchange interaction, valley population, and electron densities for two phosphorus donors in a wide range of lattice positions, orientations, and as a function of applied electric fields. The outcomes are visualized with interactive images where donor positions can be swept while watching the valley and orbital components evolve accordingly. Our results provide a physically intuitive and quantitatively accurate understanding of the placement and tuning criteria necessary to achieve high-fidelity two-qubit gates with donors in silicon. Here we provide the raw data sets and plot routines.

Microwave delivery to samples in a cryogenic environment can pose experimental challenges such as restricting optical access, space constraints and heat generation. Moreover, existing solutions that overcome various experimental restrictions do not necessarily provide a large, homogeneous oscillating magnetic field over macroscopic lengthscales, which is required for control of spin ensembles or fast gate operations in scaled-up quantum computing implementations. Here we show fast and coherent control of a negatively charged nitrogen vacancy spin ensemble by taking advantage of the high permittivity of a KTaO3 dielectric resonator at cryogenic temperatures. We achieve Rabi frequencies of up to 48 MHz, with the total field-to-power conversion ratio $C_{\rm P} = $ 9.66 mT/$\sqrt{\rm W}$ ($\approx191$ MHz/$\sqrt{\rm W}$). We use the nitrogen vacancy center spin ensemble to probe the quality factor, the coherent enhancement, and the spatial distribution of the magnetic field inside the diamond sample. The key advantages of the dielectric resonator utilised in this work are: ease of assembly, in-situ tuneability, a high magnetic field conversion efficiency, a low volume footprint, and optical transparency. This makes KTaO3 dielectric resonators a promising platform for the delivery of microwave fields for the control of spins in various materials at cryogenic temperatures.