Many questions posed in the Astro2020 Decadal survey in both the New Messengers and New Physics and the Cosmic Ecosystems science themes require a gamma-ray mission with capabilities exceeding those of existing (e.g. Fermi, Swift) and planned (e.g. COSI) observatories. ComPair, the Compton Pair telescope, is a prototype of such a next-generation gamma-ray mission. It had its inaugural balloon flight from Ft. Sumner, New Mexico in August 2023. To continue the goals of the ComPair project to develop technologies that will enable a future gamma-ray mission, the next generation of ComPair (ComPair-2) will be upgraded to increase the sensitivity and low-energy transient capabilities of the instrument. These advancements are enabled by AstroPix, a silicon monolithic active pixel sensor, in the tracker and custom dual-gain silicon photomultipliers and front-end electronics in the calorimeter. This effort builds on design work for the All-sky Medium Energy Gamma-ray Observatory eXplorer (AMEGO-X) concept that was submitted the 2021 MIDEX Announcement of Opportunity. Here we describe the ComPair-2 prototype design and integration and testing plans to advance the readiness level of these novel technologies.

The ComPair gamma-ray telescope is a technology demonstrator for a future gamma-ray telescope called the All-sky Medium Energy Gamma-ray Observatory (AMEGO). The instrument is composed of four subsystems, a double-sided silicon strip detector, a virtual Frisch grid CdZnTe calorimeter, a CsI:Tl based calorimeter, and an anti-coincidence detector (ACD). The CsI calorimeter's goal is to measure the position and energy deposited from high-energy events. To demonstrate the technological readiness, the calorimeter has flown onboard a NASA scientific balloon as part of the GRAPE-ComPair mission and accumulated around 3 hours of float time at an altitude of 40 km. During the flight, the CsI calorimeter observed background radiation, Regener-Pfotzer Maximum, and several gamma-ray activation lines originating from aluminum.

The Compton Pair (ComPair) telescope is a prototype that aims to develop the necessary technologies for future medium energy gamma-ray missions and to design, build, and test the prototype in a gamma-ray beam and balloon flight. The ComPair team has built an instrument that consists of 4 detector subsystems: a double-sided silicon strip detector Tracker, a novel high-resolution virtual Frisch-grid cadmium zinc telluride Calorimeter, and a high-energy hodoscopic cesium iodide Calorimeter, all of which are surrounded by a plastic scintillator anti-coincidence detector. These subsystems together detect and characterize photons via Compton scattering and pair production, enable a veto of cosmic rays, and are a proof-of-concept for a space telescope with the same architecture. A future medium-energy gamma-ray mission enabled through ComPair will address many questions posed in the Astro2020 Decadal survey in both the New Messengers and New Physics and the Cosmic Ecosystems themes. In this contribution, we will give an overview of the ComPair project and steps forward to the balloon flight.

The Polarized Gamma-ray Observer (PoGO) is a new balloon-borne instrument designed to measure polarization from astrophysical objects in the 30-200 keV range. It is under development for the first flight anticipated in 2008. PoGO is designed to minimize the background by an improved phoswich configuration, which enables a detection of 10 % polarization in a 100 mCrab source in a 6--8 hour observation. To achieve such high sensitivity, low energy response of the detector is important because the source count rate is generally dominated by the lowest energy photons. We have developed new PMT assemblies specifically designed for PoGO to read-out weak scintillation light of one photoelectron (1 p.e.) level. A beam test of a prototype detector array was conducted at the KEK Photon Factory, Tsukuba in Japan. The experimental data confirm that PoGO can detect polarization of 80-85 % polarized beam down to 30 keV with a modulation factor 0.25 ± 0.05.

We are developing a new balloon-borne instrument (PoGO), to measure polarization of soft gamma rays (25-200 keV) using asymmetry in azimuth angle distribution of Compton scattering. PoGO will detect 10% polarization in 100mCrab sources in a 6-8 hour observation and bring a new dimension to studies on gamma ray emission/transportation mechanism in pulsars, AGNs, black hole binaries, and neutron star surface. The concept is an adaptation to polarization measurements of well-type phoswich counter technology used in balloon-borne experiments (Welcome-1) and AstroE2 Hard X-ray Detector. PoGO consists of close-packed array of 397 hexagonal well-type phoswich counters. Each unit is composed of a long thin tube (well) of slow plastic scintillator, a solid rod of fast plastic scintillator, and a short BGO at the base. A photomultiplier coupled to the end of the BGO detects light from all 3 scintillators. The rods with decay times < 10 ns, are used as the active elements; while the wells and BGOs, with decay times /spl sim/ 250 ns are used as active anti-coincidence. The fast and slow signals are separated out electronically. When gamma rays entering the field-of-view (fwhm /spl sim/3deg/sup 2/) strike a fast scintillator, some are Compton scattered. A fraction of the scattered photons are absorbed in another rod (or undergo a second scatter). A valid event requires one clean fast signal of pulse-height compatible with photo-absorption (> 20 keV) and one or more compatible with Compton scattering (< 10 keV). Studies based on EGS4 (with polarization features) and Geant4 predict excellent background rejection and high sensitivity.