In the Bavarian Alps (Germany), west of the Isar River, the abyssal deposits of the Lower Barremian to Upper Campanian Rhenodanubian Group consist of siliciclastic and calcareous turbidites alternating with hemipelagic non-calcareous mudstones. The up to 1500-m-thick succession, deposited in the Penninic Basin to the south of the European Plate, is characterized by a low mean sedimentation rate (c. 25mmkyr−1) over 60 million years. Palaeocurrents and turbidite facies distribution patterns suggest that sedimentation occurred on a weakly inclined abyssal plain. The highest sedimentation rates (up to 240mmkyr−1) were associated with the calcareous mud turbidites of the newly defined Röthenbach Subgroup, which includes the Piesenkopf, Kalkgraben and Hällritz formations (Middle Coniacian to Middle Campanian). These calcareous turbidites prograded from the west, and interfinger towards the east with red hemipelagic claystone. A high sea level presumably favoured pelagic carbonate production and accumulation on the shelves and on internal platforms in the western part of the basin, whereas siliciclastic shelves with steep slope angles have bordered the eastern part of the basin, where a dearth of turbidite sedimentation and increased Cretaceous oceanic red beds deposition occurred. In contrast to the eustatically-induced Middle Coniacian to Lower Campanian Cretaceous oceanic red beds (calcareous nannoplankton zones CC14 to CC18), red hemipelagites of Early Cenomanian age (upper part of calcareous nannoplankton zone CC9) and early Late Campanian age (upper part of zone CC21 and zone CC22) are interpreted as the result of regional tectonic activity.

The purpose of this seismic investigation in the Upper Bavarian Miesbach area, as part of the international TRANSALP project, was to study the tectonic contact between the autochthonous Foreland Molasse and the allochthonous Folded Molasse marking the tectonic front of the Alpine orogen. Another specific target was the dip of the frontal emerging main thrust of the tectonic units Helveticum/Ultrahelveticum and Rhenodanubian Flysch overriding the Folded Molasse. Twelve seismic profiles obtained from the hydrocarbon industry were reprocessed. From the Foreland Molasse southward to the Autochthonous Molasse in the subsurface of the overthrust Folded Molasse conspicuous features such as steep normal faults at the Molasse base, S-directed thickening of Molasse sediments or sedimentary discordant base of Upper Marine Molasse can be recognized.Shallow high-resolution seismic measurements were conducted along two profiles across the tectonic contact between Foreland Molasse and Folded Molasse, as well as along a profile across the frontal emerging main thrust of the Helveticum/Ultrahelveticum and the Rhenodanubian Flysch. Geological structures could be identified in the top 300-500 ms two-way traveltime interval, which is hardly possible with the usual deep-seismic method. The method thus provides a bridge between deep-reflection seismics and surface geology.In contrast to the western Bavarian Molasse zone, the tectonic boundary between the Foreland Molasse and the Folded Molasse in the investigated area is not characterized by a large blind-thrust triangle zone but by a simple south-dipping thrust plane. Adjacent to the S follow several steeply south-dipping inverse Molasse thrust slices and the Miesbach syncline. The inverse thrust slices are interpreted as the overturned and sheared northern limb of a fault propagation fold, which linked the Folded Molasse to the Foreland Molasse during a final orogenic phase.The main thrust of the Helveticum/Ultrahelveticum and the Rhenodanubian Flysch are well imaged in the near-surface interval of the high-resolution reflection seismic data. In contrast to previously published results, these thrust planes show a gentle dip to the S from the surface down to at least 500-1000 m depth. (c) 2005 Elsevier B.V. All rights reserved.

A high‐resolution reflection seismic survey was carried out in the southern part of the Bavarian Molasse Basin in 1998 and 1999. The survey aimed to investigate the near‐surface structure of the complicated transition from the unfolded Foreland Molasse to the Folded Molasse, and the Folded Molasse to the internally complicated thrust systems of the Helveticum, the Ultrahelveticum and the Rhenodanubian Flysch. The study is linked to the TRANSALP seismic project, and the results help to fill the gap between the surface and the upper 300–500 ms two‐way traveltime (TWT), typical of deep‐reflection seismic experiments. The environmental conditions encountered in the study area required that particular attention be paid to the acquisition parameters for the three seismic lines (each about 4 km long). The energy source was a small vibrator; the geophone spread, spacing and frequency range were adjusted to image reflectors, which were expected to dip steeply southwards.In general, the unprocessed field records did not show signals that could be attributed to specific reflectors. Individual trace processing considerably improved the data quality, taking into account the influence of the Quaternary cover and also the strong lateral velocity variations of the shallow subsurface. The effects of the various processing steps, such as muting, refraction statics, residual statics and velocity analysis, are discussed. To assess the NMO velocities, the qualitative analysis of the seismic energy in a common‐shotpoint gather offered advantages over an analysis in a common‐midpoint gather or in a stacked section, and proved to be very effective. As demonstrated along the Miesbach 9801 line, low‐velocity zones extend locally down to about 400 ms, adjacent to zones of extremely high velocities close to the surface, reflecting steeply dipping strata.Besides the Quaternary cover on top, the Miesbach 9801 and Miesbach 9802 lines exhibit many horizontal reflections, in places down as far as 1400 ms TWT, indicating the sedimentary sequences of the unfolded Foreland Molasse. The southern part of both lines is dominated by southward‐dipping reflection bands, indicating units of the Folded Molasse. The reflection pattern shown by the Miesbach 9901 line suggests that there is almost no Quaternary cover. Southward‐dipping elements reflect the internal structure of the Folded Molasse, whereas a rather diffuse reflection signature may be attributed to Rhenodanubian Flysch units.

P157 HIGH-RESOLUTION REFLECTION SEISMICS AT THE BAVARIAN PART OF THE TRANSALP PROFILE R. THOMAS 1 K. BRAM 1 J. FERTIG 2 and K. SCHWERD 3 Introduction 1 The east-alpine reflection seismic traverse (TRANSALP) is a multi-disciplinary and international research program for investigating orogenic processes by continent-continent collisions focusing on the Eastern Alps. It consists of several seismic and seismological subprojects within a 340 km long and 40 km wide North-South Transect (approx. between Munich and Venice) and is accompanied by complementary geophysical geological and petrological research projects of Italian Austrian Swiss Dutch and German teams (Gebrande 2000). In its northern

In charge collecting semi-conductor detectors the absorbed radiation energy E causes a proportional signal which is fed to a multi-channel analyser after suitable amplification and filtering. Full width at half maximum, δE, (half width) is defined as the energy resolution. Keywords: characteristicsdetectorslithiumproductionsemiconductorssilicon

In this paper the starting potential, plateau-characteristics and dead-time of bromine-quenched Geiger-Müller counters have been studied as a function of the anode diameter and neon-bromine-mixture. A remarkable improvement of the plateau-characteristics has been found with increased anode diameter and increased pressure of bromine. Large admixtures of argon to the neon-bromine-filling of the counter caused a rise of the starting potential and a deterioration of the plateau-characteristics. The dead-time is found to vary only slightly with the counter voltage for thick anodes and low pressures.