To date, there has been limited reporting on the fabrication and properties of macroscopic sheet assemblies (specifically buckypapers) composed of carbon/boron nitride core-shell heteronanotubes (MWCNT@BNNT) or boron nitride nanotubes (BNNTs). Herein we report the synthesis of MWCNT@BNNTs via a facile method involving Atmospheric Pressure Chemical Vapor Deposition (APCVD) and the safe h-BN precursor ammonia borane. These MWCNT@BNNTs were used as sacrificial templates for BNNT synthesis by thermal oxidation of the core carbon. Buckypaper fabrication was facilitated by facile sonication and filtration steps. To test the thermal conductivity properties of these new buckypapers, in the interest of thermal management applications, we have developed a novel technique of advanced scanning thermal microscopy (SThM) that we call piercing SThM (pSThM). Our measurements show a 14% increase in thermal conductivity of the MWCNT@BNNT buckypaper relative to a control multiwalled carbon nanotube (MWCNT) buckypaper. Meanwhile, our BNNT buckypaper exhibited approximately half the thermal conductivity of the MWCNT control, which we attribute to the turbostratic quality of our BNNTs. To the best of our knowledge, this work achieves the first thermal conductivity measurement of a MWCNT@BNNT buckypaper and of a BNNT buckypaper composed of BNNTs not synthesized by high energy techniques.

Silica nanoparticles (SiNP) trigger a range of innate immune responses in relevant essential organs, such as the liver and the lungs. Inflammatory reactions, including NLRP3 inflammasome activation, have been linked to particulate materials; however, the molecular mechanisms and key actors remain elusive. Although many receptors, including several scavenger receptors, were suggested to participate in SiNP cellular uptake, mechanistic evidence of their role on innate immunity is lacking. Here we present an atomic force microscopy-based approach to physico-mechanically map the specific interaction occurring between nanoparticles and scavenger receptor A1 (SRA1) in vitro on living lung epithelial cells. We find that SiNP recognition by SRA1 on human macrophages plays a key role in mediating NLRP3 inflammasome activation, and we identify cellular mechanical changes as clear indicators of inflammasome activation in human macrophages, greatly advancing our knowledge on the interplay among nanomaterials and innate immunity.

Nacre-like alumina manufactured using spark plasma sintering shows a strikingly different mechanical behaviour compared to conventional alumina. A range of sintering conditions were applied to micron-sized alumina platelet powders to form alumina with different nacre-like microstructures, density, grain size and flexural strength. We show that a microstructure of aligned sintered platelets not only mitigates the typical issue of brittleness, but also has extraordinary energy absorption capabilities. It can withstand an impact with up to three times the kinetic energy required to break monolithic alumina while maintaining structural integrity. The high-rate compressive strength is shown to be more than 50% higher than that of monolithic alumina and we show energy absorption mechanisms such as crack deflection and branching to be present. Our approach provides a fast and effective way of manufacturing aligned nacre-like ceramic microstructures that maintain structural integrity through energy dissipation and interlocking mechanisms.

This report demonstrates the facile fabrication of conductive, high-strength, all-carbon "buckyfilms", which spontaneously delaminate from their depositing substrates. Electrophoretic deposition (EPD) is a scalable technique that has been underutilized in the fabrication of freestanding, bulk carbon nanotube (CNT) materials. Here, Derjaguin-Landau-Verwey-Overbeek (DLVO) theory is applied to understand and optimize the deposition process of oxidized multiwall carbon nanotubes. As a result, unprecedented deposition rates of 0.3 mg/(cm(2) min) and film thicknesses of >40 mu m were achieved. The deposited films are electrochemically reduced to achieve enhanced electrical conductivities (55 S/cm), demonstrating a freestanding carbon nanotube analogue to reduced graphene oxide. Examination of the films using electron microscopy revealed a densely packed structure (1.61 g/cm(3)) and cross-linking effects, which produce tensile strengths (>60 MPa) comparable to CNT-epoxy composites and many common structural polymers. These lightweight, flexible films and the versatile, scalable method used to produce them represent promising new technologies for flexible electronics.

A novel building block material for the generation of non-brittle ceramic composites consisting of micron-sized alumina platelets homogeneously coated with multi-wall carbon nanotubes (MWCNTs) bound to their surface is described. The MWCNT phase is grown in situ from immobilised metal catalyst particles using chemical vapour deposition techniques. In-depth Raman and scanning electron microscope studies revealed that this approach solves the typical issue of MWCNT-agglomeration in ceramic matrices and paves the way to excellent control over MWCNT purity and concentration within the resulting composite material. Moreover, we show that the preparation of the catalyst is the most important factor for the generation of uniformly distributed MWCNTs of high-quality on these platelets. With these MWCNT-coated alumina building blocks, we have manufactured nacre-like biomimetic composites using spark plasma sintering. The resulting composites are electrically conductive and three-point bending tests show a transition from brittle/catastrophic failure to graceful failure, holding great promise towards multifunctional, tough and strong lightweight ceramic composite manufacturing.