We have studied the adsorption of two silane compounds, (3-mercaptopropyl) trimethoxysilane (MPTMS) and npropyltriethoxysilane (PTES), on a rutile TiO2(110) surface using angle dependent X-ray photoelectron spectroscopy. The observation of the S 2p line, in the case of MPTMS, and the C 1s line for both MPTMS and PTES confirms the adsorption of the molecules. For a dose of 122 Langmuirs of MPTMS we find a room temperature coverage of 0.55 monolayers, while for a 60 Langmuir dose of PTES the coverage is found to be 0.89 monolayers. Thus, MPTMS has a considerably lower sticking coefficient on the rutile TiO2(110) surface than PTES. Both PTES and MPTES are found to bind dissociatively to the surface. An analysis of angle dependent data further suggests that for MPTMS the thiol group and thus alkyl chain points away from the surface, while for a 0.5 monolayer coverage of PTES the alkyl chain is oriented towards the surface. A higher coverage, ~1 monolayer, the behavior seems to be reversed for at least a fraction of all molecules. Temperature programed XPS measurements suggest that the oxy groups of both molecules desorb from the surface at 550 K, which is in accordance with literature. The present study thus provides information on how these silane coupling agents bind to titanium oxide and what their molecular orientation is on the surface. Copyright © 2015 VBRI press.

Nanometer-sized structures, surfaces and sub-surface phenomena have played an enormous role in science and technological applications and represent a driving-force of current interdisciplinary science. Recent developments include the atomic-scale characterization of nanoparticles, molecular reactions at surfaces, magnetism at the atomic scale, photoelectric characterization of nanostructures as well as two-dimensional solids. Research and development of smart nanostructured materials governed by their surface properties is a rapidly growing field. The main challenge is to develop an accurate and robust electronic structure description. The density of surface-related trap states is analyzed by transient UV photoconductivity and temperature-dependent admittance spectroscopy. An advanced application of thin films on shaped substrates is the deposition of catalytic layers on hollow glass microspheres for hydrogen storage controlled exothermal hydrolytic release. Surface properties of thin films including dissolution and corrosion, fouling resistance, and hydrophilicity/hydrophobicity are explored to improve materials response in biological environments and medicine. Trends in surface bio-functionalization routes based on vacuum techniques, together with advances in surface analysis of biomaterials, are discussed. Pioneering advances in the application of X-ray nanodiffraction of thin film cross-sections for characterizing nanostructure and local strain including in-situ experiments during nanoindentation are described. Precise measurements and control of plasma properties are important for fundamental investigations and the development of next generation plasma-based technologies. Critical control parameters are the flux and energy distribution of incident ions at reactive surfaces; it is also crucial to control the dynamics of electrons initiating non-equilibrium chemical reactions. The most promising approach involves the exploitation of complementary advantages in direct measurements combined with specifically designed numerical simulations. Exciting new developments in vacuum science and technology have focused on forward-looking and next generation standards and sensors that take advantage of photonics based measurements. These measurements are inherently fast, frequency based, easily transferrable to sensors based on photonics and hold promise of being disruptive and transformative. Realization of Pascal, the SI unit for pressure, a cold-atom trap based ultra-high and extreme high vacuum (UHV and XHV) standard, dynamic pressure measurements and a photonic based thermometer are three key examples that are presented.

One challenging task in building (bio)chemical sensors is the efficient and stable immobilization of receptor on a suitable transducer. Herein, we report a method for covalent immobilization of molecularly imprinted core-shell nanoparticles for construction of robust chemical sensors. The imprinted nanopartides with a core-shell structure have selective molecular binding sites in the core and multiple amino groups in the shell. The model Au transducer surface is first functionalized with a self-assembled monolayer of 11-mercaptoundecanoic acid. The 11-mercaptoundecanoic acid is activated by treatment with carbodiimide/N-hydroxysuccinimide and then reacted with the core-shell nanoparticles to form amide bonds. We have characterized the process by studying the treated surfaces after each preparation step using atomic force microscopy, scanning electron microscopy, fluorescence microscopy, contact angle measurements and X-ray photoelectron spectroscopy. The microscopy results show the successful immobilization of the imprinted nanoparticles on the surface. The photoelectron spectroscopy results further confirm the success of each functionalization step. Further, the amino groups on the MIP surface were activated by electrostatically adsorbing negatively charged Au colloids. The functionalized surface was shown to be active for surface enhanced Raman scattering detection of propranolol. The particle immobilization and surface enhanced Raman scattering approach described here has a general applicability for constructing chemical sensors in different formats. (C) 2015 The Authors. Published by Elsevier Inc. This is an open access article under the CC BY license

Minute electronic (bio)devices will likely play an increasingly important role in everyday life and beyond, as overall device size often limits device functionality and applicability, a factor especially critical for brain implants. Recent progress in micro- and nanoelectronics has enabled the production of nanoscale electronic components; however, overall device size is often defined by technical and technological limitations, in particular, the ability to combine heterogeneous components made using incompatible processes on different substrates. Here, the authors suggest and evaluate a concept and approach aimed at the direct three-dimensional assembly of individual nanoscale-based components into complex devices for brain implants. They demonstrate this assembly possibility via the transfer of free-standing GaP nanowires, as well as test devices made of gold film which exhibit good quality electrical contacts. The key features essential for such a functional assembly process are discussed. The authors expect this approach to be generic and to enable the development of complex minute electronic (bio)devices based on nanoscale components. The proposed type of assembly may be especially beneficial for devices with strict size constraints, such as implantable neural interfaces.

Molecularly imprinted polymers (MIPs) can be used as antibody mimics to develop robust chemical sensors. One challenging problem in using MIPs for sensor development is the lack of reliable conjugation chemistry that allows MIPs to be fixed on transducer surface. In this work, we study the use of epoxy silane to immobilize MIP nanoparticles on model transducer surfaces without impairing the function of the immobilized nanoparticles. The MIP nanoparticles with a core–shell structure have selective molecular binding sites in the core and multiple amino groups in the shell. The model transducer surface is functionalized with a self-assembled monolayer of epoxy silane, which reacts with the core–shell MIP particles to enable straightforward immobilization. The whole process is characterized by studying the treated surfaces after each preparation step using atomic force microscopy, scanning electron microscopy, fluorescence microscopy, contact angle measurements and X-ray photoelectron spectroscopy. The microscopy results show that the MIP particles are immobilized uniformly on surface. The photoelectron spectroscopy results further confirm the action of each functionalization step. The molecular selectivity of the MIP-functionalized surface is verified by radioligand binding analysis. The particle immobilization approach described here has a general applicability for constructing selective chemical sensors in different formats.

Here we detail transparent, flexible, nanostructured, membrane-less and mediator-free glucose/oxygen enzymatic fuel cells, which can be reproducibly fabricated with industrial scale throughput. The electrodes were built on a biocompatible flexible polymer, while nanoimprint lithography was used for their nanostructuring. The electrodes were covered with gold, their surfaces were visualised using scanning electron and atomic force microscopies, and they were also studied spectrophotometrically and electrochemically. The enzymatic fuel cells were fabricated following our previous reports on membrane-less and mediator-free biodevices in which cellobiose dehydrogenase and bilirubin oxidase were used as anodic and cathodic biocatalysts, respectively. The following average characteristics of transparent and flexible biodevices operating in glucose and chloride containing neutral buffers were registered: 0.63 V open-circuit voltage, and 0.6 mu W cm(-2) maximal power density at a cell voltage of 0.35 V. A transparent and flexible enzymatic fuel cell could still deliver at least 0.5 mu W cm(-2) after 12 h of continuous operation. Thus, such biodevices can potentially be used as self-powered biosensors or electric power sources for smart electronic contact lenses. (C) 2015 Elsevier B.V. All rights reserved.

We report a simple and versatile method to covalently immobilize molecularly imprinted polymer (MIP) nanoparticles on a Raman active substrate (Klarite) using a disulfide-derivatized perfluorophenylazide (PFPA-disulfide). Gold-coated Klarite was functionalized with PFPA-disulfide via a gold-sulfur bond. Upon light radiation, the available azido groups were converted to highly reactive singlet perfluorophenyl nitrene that undergoes a CH insertion reaction and form covalent bonds with the MIP nanoparticles. The resulting surfaces were characterized using scanning electron microscopy and surface enhanced Raman spectroscopy to study the morphology and template affinity of the surfaces, respectively. The Raman measurements clearly show a dose-responsive signal when propranolol binds to the MIP surface. Because the MIP particles were covalently attached to the Raman active substrate, the sensing surface was stable and could be reused after regeneration in acetic acid solution. The MIP-based Raman sensor was used successfully to detect propranolol in urine samples (7.7 × 10(-4) M). Our results show that the high selectivity of MIPs and the fingerprint Raman identification can be integrated into a compact sensing unit using high-efficiency photoconjugation. Thus, the method proposed is reliable, efficient and fast for fabricating label-free chemical sensors.

Here we detail high performance, enzymatic electrodes for oxygen bio-electroreduction, which can be easily and reproducibly fabricated with industry-scale throughput. Planar and nanostructured electrodes were built on biocompatible, flexible polymer sheets, while nanoimprint lithography was used for electrode nanostructuring. To the best of our knowledge, this is one of the first reports concerning the usage of nanoimprint lithography for amperometric bioelectronic devices. The enzyme (Myrothecium verrucaria bilirubin oxidase) was immobilised on planar (control) and artificially nanostructured, gold electrodes by direct physical adsorption. The detailed electrochemical investigation of bioelectrodes was performed and the following parameters were obtained: open circuit voltage of approximately 0.75 V, and maximum bio-electrocatalytic current densities of 18 µA/cm2 and 58 µA/cm2 in air-saturated buffers versus 48 µA/cm2 and 186 µA/cm2 in oxygen-saturated buffers for planar and nanostructured electrodes, respectively. The half-deactivation times of planar and nanostructured biocathodes were measured to be 2 h and 14 h, respectively. The comparison of standard heterogeneous and bio-electrocatalytic rate constants showed that the improved bio-electrocatalytic performance of the nanostructured biocathodes compared to planar biodevices is due to the increased surface area of the nanostructured electrodes, whereas their improved operational stability is attributed to stabilisation of the enzyme inside nanocavities.

The interaction of the ruffle TiO2(110) surface with tetraethyl orthosilicate (TEOS) in the pressure range from UHV to 1 mbar as well as the TEOS-based chemical vapor deposition of SiO2 on the TiO2(110) surface were monitored in real time using near-ambient pressure X-ray photoelectron spectroscopy. The experimental data and density functional theory calculations confirm the dissociative adsorption of TEOS on the surface already at room temperature. At elevated pressure, the ethoxy species formed in the adsorption process undergoes further surface reactions toward a carboxyl species not observed in the absence of a TEOS gas phase reservoir. Annealing of the adsorption layer leads to the formation of SiO2, and an intermediate oxygen species assigned to a mixed titanium/silicon oxide is identified. Atomic force microscopy confirms the morphological changes after silicon oxide formation.

Molecularly imprinted polymers (MIPs) have a predesigned molecular recognition capability that can be used to build robust chemical sensors. MIP-based chemical sensors allow label-free detection and are particularly interesting due to their simple operation. In this work we report the use of thiol-terminated MIP microspheres to construct surfaces for detection of a model organic analyte, nicotine, by surface enhanced Raman scattering (SERS). The nicotine-imprinted microspheres are synthesized by RAFT precipitation polymerization and converted into thiol-terminated microspheres through aminolysis. The thiol groups on the MIP surface allow the microspheres to be immobilized on a gold-coated substrate. Three different strategies are investigated to achieve surface enhanced Raman scattering in the vicinity of the imprinted sites: (1) direct sputtering of gold nanoparticles, (2) immobilization of gold colloids through the MIP's thiol groups, and (3) trapping of the MIP microspheres in a patterned SERS substrate. For the first time we show that large MIP microspheres can be turned into selective SERS surfaces through the three different approaches of assembly. The MIP-based sensing surfaces are used to detect nicotine to demonstrate the proof of concept. As synthesis and surface functionalization of MIP microspheres and nanoparticles are well established, the methods reported in this work are handy and efficient for constructing label-free chemical sensors, in particular for those based on SERS detection.

In this work, we report a method that allows the deterministic, photo-controlled covalent assembly of nanoparticles directly on surface. As a model system, we study the conjugation of molecularly imprinted polymer (MIP) nanoparticles on a glass surface and confirm that the immobilized nanoparticles maintain their molecular recognition functionality. The glass slide was first modified with perfluorophenylazide and then used to bind MIP nanoparticles under UV irradiation. After each step the surface was analyzed by water contact angle measurement, fluorescence microscopy, scanning electron microscopy, and/or synchrotron-based X-ray photoelectron spectroscopy. The MIP nanoparticles immobilized on the glass surface remained stable and maintained specific binding for the template molecule, propranolol. The method developed in this work allows MIP nanoparticles to be directly coupled to a flat surface, offering a straightforward means to construct robust chemical sensors. Using the reported photo conjugation method, it is possible to generate patterned assembly of nanoparticles using a photomask. Since perfluorophenylazide-based photochemistry works with all kinds of organic material, the method developed in this work is expected to enable immobilization of not only MIPs but also other kinds of organic and inorganic-organic core-shell particles for various applications involving photon or electron transfer. (C) 2014 The Authors. Published by Elsevier B.V. All rights reserved.

Detailed experimental evidences that neither an overpotential of bioelectrocatalysis, nor direct electron transfer and bioelectrocatalytic reaction rates for an adsorbed enzyme depend on the size of gold nanoparticles, are presented.

Biomedical Sciences, Health & Society, Ma E-mail: sergey.shleev@mah.se Kurchatov NBICS Centre, National Resear Moscow, Russia Division of Solid State Physics, The Nano Lund University, 221 00 Lund, Sweden Neuronano Research Center, Lund Universi A.N. Bach Institute of Biochemistry, 119071 † Electronic supplementary information about chemicals and equipment, fabricat redox enzyme, biomodication; AFM theoretical basis of measurements 10.1039/c4ra08107b Cite this: RSC Adv., 2014, 4, 38164

We present an electrode, based on structurally controlled nanowires, as a first step towards developing a useful nanostructured device for neurophysiological measurements in vivo. The sensing part of the electrode is made of a metal film deposited on top of an array of epitaxially grown gallium phosphide nanowires. We achieved the first functional testing of the nanowire-based electrode by performing acute in vivo recordings in the rat cerebral cortex and withstanding multiple brain implantations. Due to the controllable geometry of the nanowires, this type of electrode can be used as a model system for further analysis of the functional properties of nanostructured neuronal interfaces in vivo.

In recent years we have witnessed how nanotechnology have developed from being a more research oriented technology towards a more mature technology capable to cope with industrial needs. Especially, this has followed as a consequence of an increased worldwide funding being directed towards nano-enabled applications. Our research efforts in Lund at the Nanometer Structure Consortium, being based on fundamental material science understanding, have also a strong application and engineering orientation. A key enabling technology is processing and fabrication of nanostructures and nanostructured surfaces. In this talk I will briefly discuss various techniques for fabrication of nanostructures, primarily emerging technologies such as nanoimprint lithography and nanowire fabrication and combinations thereof. Especially, I will present how epitaxially grown nanowires can be employed for studies of neuronal outgrowth, cellular response and cellular survival [1-4].

Self-organization phenomena are of critical importance in living organisms and of great interest to exploit in nanotechnology. Here we describe in vitro self-organization of molecular motor-propelled actin filaments, manifested as a tendency of the filaments to accumulate in high density close to topographically defined edges on nano- and microstructured surfaces. We hypothesized that this “edge-tracing” effect either (1) results from increased motor density along the guiding edges or (2) is a direct consequence of the asymmetric constraints on stochastic changes in filament sliding direction imposed by the edges. The latter hypothesis is well captured by a model explicitly defining the constraints of motility on structured surfaces in combination with Monte-Carlo simulations [cf. Nitta et al. (2006)] of filament sliding. In support of hypothesis 2 we found that the model reproduced the edge tracing effect without the need to assume increased motor density at the edges. We then used model simulations to elucidate mechanistic details. The results are discussed in relation to nanotechnological applications and future experiments to test model predictions.