We report a mechanochemical one-pot Barbier/Simmons-Smith reaction enabled by ball-milling-mediated activation of zinc(0). This operationally simple method generates organozinc intermediates in situ and uses them sequentially in allylation and cyclopropanation without intermediate work-up. The protocol tolerates a broad range of ketones, exhibits selectivity over other carbonyl groups, and is compatible with various physical forms of zinc metal. In selected cases, the reaction proceeds with markedly enhanced diastereoselectivity under minimal-solvent milling conditions and was demonstrated on a gram scale using standard ball-milling equipment. Comparative studies show advantages over conventional solution and neat conditions, highlighting how mechanochemistry can uniquely enable tandem organometallic processes as for C-C bond construction.

The borrowing hydrogen (BH) approach enables commodity alcohols to be employed as alkylating agents, generating water as the sole by-product. Recently, Fe-based catalysts have been utilized in combination with visible light irradiation to enable alkylation processes at near room temperature, which improves sustainability metrics while presenting opportunities for further reaction development.

This highlight summarises electrochemical approaches for the deconstructive functionalization of arylcycloalkanes via the fragmentation of anodically generated aromatic radical cations. A diverse range of deconstructive functionalization processes is described, including discussion on the electrochemical reaction conditions employed, scope and limitations, and reaction mechanisms, in addition to highlighting future opportunities in this burgeoning area of sustainable synthesis.

Herein we report an electrochemical deconstructive functionalization approach for the synthesis of C(sp3)-rich heterocycles. The reaction proceeds via the mesolytic cleavage of anodically generated aromatic radical cations and the trapping of formed carbocation intermediates with internal nucleophiles. The method has been demonstrated across various arylalcohol substrates to access a diverse range of C(sp3)-rich heterocycles including tetrahydrofuran, tetrahydropyran, and pyrrolidine scaffolds (26 examples). The electrochemical method was demonstrated on a 5 mmol scale via single pass continuous flow, which utilized lower supporting electrolyte concentration and exhibited increased productivity in relation to the batch process.

Herein, we report an iron-catalyzed transfer hydrogenation of allylic alcohols. The operationally simple protocol employs a well-defined bench stable (cyclopentadienone)iron(0) carbonyl complex as a precatalyst in combination with K2CO3 (4 mol %) and isopropanol as the hydrogen donor. A diverse range of allylic alcohols undergo transfer hydrogenation to form the corresponding alcohols in good yields (33 examples, ≤83% isolated yield). The scope and limitations of the method have been investigated, and experiments that shed light on the reaction mechanism have been conducted.

Herein, we report a synthetic method to access a range of highly substituted indoles via the B(C6F5)3-catalyzed transfer of 2° alkyl groups from amines. The transition-metal-free catalytic approach has been demonstrated across a broad range of indoles and amine 2° alkyl donors, including various substituents on both reacting components, to access useful C(3)-alkylated indole products. The alkyl transfer process can be performed using Schlenk line techniques in combination with commercially available B(C6F5)3·nH2O and solvents, which obviates the requirement for specialized equipment (e.g., glovebox).

Herein, we report a mechanistic investigation of a recently developed electrochemical method for the deconstructive methoxylation of arylalcohols. A combination of synthetic, electroanalytical, and computational experiments have been performed to gain a deeper understanding of the reaction mechanism and the structural requirements for fragmentation to occur. It was found that 2-arylalcohols undergo anodic oxidation to form the corresponding aromatic radical cations, which fragment to form oxocarbenium ions and benzylic radical intermediates via mesolytic cleavage, with further anodic oxidation and trapping of the benzylic carbocation with methanol to generate the observed methyl ether products. It was also found that the electrochemical fragmentation of 2-arylalkanols is promoted by structural features that stabilize the oxocarbenium ions and/or benzylic radical intermediates formed upon mesolytic cleavage of the aromatic radical cations. With an enhanced understanding of the reaction mechanism and the structural features that promote fragmentation, it is anticipated that alternative electrosynthetic transformations will be developed that utilize this powerful, yet underdeveloped, mode of substrate activation.

Herein we report an electrochemical approach for the deconstructive functionalization of cycloalkanols, where various alcohols, carboxylic acids, and N-heterocycles are employed as nucleophiles. The method has been demonstrated across a broad range of cycloalkanol substrates, including various ring sizes and substituents, to access useful remotely functionalized ketone products (36 examples). The method was demonstrated on a gram scale via single-pass continuous flow, which exhibited increased productivity in relation to the batch process.

C-H functionalization is widely regarded as an important area in the development of synthetic methodology, enabling the design of more time- and atom-efficient syntheses. The ability of electron-deficient organoboranes to mediate hydride abstraction from alpha-amino C-H bonds is therefore of great interest, as the reactive iminium and hydridoborate moieties generated are able to participate in a range of synthetically useful transformations. In this review, we cover the recent advances made in organoborane-mediated hydride abstraction, and focus on the catalytic applications of electron-deficient boranes in alpha- or beta-functionalization, alpha,beta-difunctionalization, and the dehydrogenation of amines.

This highlight summarises electrochemical approaches for the generation and utilization of alkoxy radicals, predominantly focusing on recent advances (2012-present). The application of electrochemically generated alkoxy radicals in a diverse range of transformations is described, including discussion on reaction mechanisms, scope and limitations, in addition to highlighting future challenges in this burgeoning area of sustainable synthesis.

A mechanochemical nickel-catalyzed intramolecular difunctionalization reaction of alkene tethered aryl halides with alkyl halides is herein described. This method allows for synthesis of 3,3-disubstituted heterocycles, namely oxindoles, with shorter reaction times than solution-phase counterparts. Additionally, this process is solvent minimized, with DMA used in liquid-assisted grinding (LAG) quantities and circumvents the need for chemical activation of the terminal reductant (manganese) through mechanical grinding. The process can be scaled up to yield over a gram of product and modest enantioinduction is possible by utilizing a chiral PyrOx ligand.

The cross-electrophile coupling of either twisted-amides or heteroaryl halides with alkyl halides, enabled by ball-milling, is herein described. The operationally simple nickel-catalyzed process has no requirement for inert atmosphere or dry solvents and delivers the corresponding acylated or heteroarylated products across a broad range of substrates. Key to negating the necessity of inert reaction conditions is the mechanical activation of the raw metal terminal reductant: manganese in the case of twisted amides and zinc for heteroaryl halides.

An electrochemical method for the azidocyanation of alkenes via 1,4-nitrile migration has been developed. This organic oxidant free method is applicable across various alkene containing cyanohydrins, and provides access to a broad range of synthetically useful 1,2-azidonitriles (28 examples). This methodology was extended to an electrochemical alkene sulfonylcyanation procedure, as well as to access a trifunctionalized hexanenitrile from a malononitrile starting material. The orthogonal derivatization of the products was also demonstrated through chemoselective transformations.

Herein, we report a one-pot synthesis of styrene derivatives via a novel B(C6F5)3-catalyzed E-selective isomerization of readily accessible allyl silanes and subsequent Hiyama coupling of the versatile alkenyl silane intermediates. This one-pot, two-step approach enables access to a broad range of styrene derivatives, including those containing Lewis basic functional groups, that cannot be accessed via the previously developed B(C6F5)3-catalyzed isomerization of allyl benzenes.

Ball mills input energy to samples by pulverising the contents of the jar. Each impact on the sample or wall of the jar results in an instantaneous transmission of energy in the form of a temperature and pressure increase (volume reduction). Conversely, enantioselective organocatalytic reactions proceed through perceived delicate and well-organised transition states. Does there exist a dichotomy in the idea of enantioselective mechanochemical organocatalysis? This Review provides a survey of the literature reporting the combination of organocatalytic reactions with mechanochemical ball milling conditions. Where possible, direct comparisons of stirred in solution, stirred neat and ball milled processes are drawn with a particular focus on control of stereoselectivity.

Herein, we report a new electrochemical method for alkoxy radical generation from alcohols using a proton-coupled electron transfer (PCET) approach, showcased via the deconstructive functionalization of cycloalkanols. The electrochemical method is applicable across a diverse array of substituted cycloalkanols, accessing a broad range of synthetically useful distally functionalized ketones. The orthogonal derivatization of the products has been demonstrated through chemoselective transformations, and the electrochemical process has been performed on a gram scale in continuous single-pass flow.

Herein, we report the B(C6 F5 )3 -catalyzed E-selective isomerization of alkenes. The transition-metal-free method is applicable across a diverse array of readily accessible substrates, giving access to a broad range of synthetically useful products containing versatile stereodefined internal alkenes. The reaction mechanism was investigated by using synthetic and computational methods.

Borrowing hydrogen is a process that is used to diversify the synthetic utility of commodity alcohols. A catalyst first oxidizes an alcohol by removing hydrogen to form a reactive carbonyl compound. This intermediate can undergo a diverse range of subsequent transformations before the catalyst returns the “borrowed” hydrogen to liberate the product and regenerate the catalyst. In this way, alcohols may be used as alkylating agents whereby the sole byproduct of this one-pot reaction is water. In recent decades, significant advances have been made in this area, demonstrating many effective methods to access valuable products. This outlook highlights the diversity of metal and biocatalysts that are available for this approach, as well as the various transformations that can be performed, focusing on a selection of the most significant and recent advances. By succinctly describing and conveying the versatility of borrowing hydrogen chemistry, we anticipate its uptake will increase across a wider scientific audience, expanding opportunities for further development.

A manganese-catalyzed electrochemical deconstructive chlorination of cycloalkanols has been developed. This electrochemical method provides access to alkoxy radicals from alcohols and exhibits a broad substrate scope, with various cyclopropanols and cyclobutanols converted into synthetically useful β- and γ-chlorinated ketones (40 examples). Furthermore, the combination of recirculating flow electrochemistry and continuous inline purification was employed to access products on gram scale.