Atlas is a facility being designed at Los Alamos National Laboratory (LANL) to perform high energy-density experiments in support of weapon-physics and basic-research programs. It is designed to be an international user facility, providing experimental opportunities to researchers from national laboratories and academic institutions. For hydrodynamic experiments, it will be capable of achieving pressures exceeding 20-Mbar in a several cm/sup 3/ volume. With the development of a suitable opening switch, it will also be capable of producing soft X-rays. The 36 MJ capacitor bank will consist of 240 kV Marx modules arranged around a central target chamber. The Marx modules will be discharged through vertical triplate transmission lines to a parallel plate collector inside the target chamber. The capacitor bank is designed to deliver a peak current of 45 to 50 MA with a 4- to 5-/spl mu/s risetime. The Marx modules are designed to be reconfigured to a 480 kV configuration for opening switch development. Predicted performance with a typical load is presented. Descriptions of the major subsystems are also presented.

Atlas is a facility being designed at Los Alamos National Laboratory (LANL) to perform high-energy-density experiments in support of weapon physics and basic research programs. It is designed to be an international user facility, providing experimental opportunities to researchers from national laboratories and academic institutions. For hydrodynamic experiments, it will be capable of achieving a pressure exceeding 30 Mbar in a several cubic centimeter volume. With the development of a suitable opening switch, it will be capable of producing more than 3 MJ of soft X-rays.The capacitor bank design consists of a 36 MJ array of 240 kV Marx modules. The system is designed to deliver a peak current of 45-50 MA with a 4-5-mu s rise time. The Marx modules are designed to be reconfigured to a 480-kV configuration for opening switch development. The capacitor bank is resistively damped to limit fault currents and capacitor voltage reversal. An experimental program for testing and certifying prototype components is currently underway.The capacitor bank design contains 300 closing switches. These switches are a modified version of a railgap switch originally designed for the DNA-ACE machines. Because of the large number of switches in the system, individual switch prefire rates must be less than 10(-4) to protect the expensive target assemblies. Experiments are underway to determine if the switch-prefire probability can be reduced with rapid capacitor charging.