In this study a straightforward strategy to deliver photosensitizing molecules into cancer cells by using Laponite RD® (LAP) nanodisks as carrier is presented. We report the application of LAP functionalized with a highly hydrophobic Silicon phthalocyanine photosensitizer (SiPc) for efficient cell uptake and photodynamic therapy (PDT) of MCF-7 breast cancer cells in vitro. This inorganic-organic hybrid nanomaterial caused a threefold increase in intracellular ROS levels and 99.7% of cancer cell inactivation after light treatment (630 nm; fluency of 108 J/cm²). With its theranostic capabilities (simultaneous fluorescence and singlet oxygen generation), uptake into cancer cells was monitored to control the photo-inactivation. The functionalized nanodisks already proved to be an efficient photo-inactivator of pathogenic Gram-(+) bacteria and were previously reported as LS10. By extending the use of LS10 to PDT of cancer cells, it is an example of a photosensitizer functionalized nanoclay with multipurpose drug characteristics, demonstrating an intriguing potential for future phototherapeutic studies and applications.

Cyclometalated IrIII complexes are promising candidates for biomedical applications but high cytotoxicity limits their use as imaging and sensing agents. We herein introduce the use of Laponite as carrier for triplet-emitting cyclometalated IrIII complexes. Laponite is a versatile nanoplatform because of its biocompatibility, dispersion stability and large surface area that readily adsorbs functional nonpolar and cationic molecules. These inorganic-organic hybrid nanomaterials mask cytotoxicity, show efficient cell uptake and increase luminescent properties and photostability. By camouflaging intrinsic cytotoxicity, this simple method potentially extends the palette of available imaging and sensing dyes to any metal-organic complexes, especially those that are usually cytotoxic.

Core-shell nanoparticles operating by infrared-to-visible energy upconversion (UCNPs) have been proposed as theranostic carriers for photosensitizers to increase deep-tissue penetration of photodynamic therapy against tumors and bacterial infections. Herein we present a series of core-shell mesoporous silica-coated NaYF4:Yb:Er UCNPs (mSiO2@UCNP) with different surface functionalizations to enhance bacterial targeting and loaded with the hydrophobic photosensitizer SiPc (silicon 2,9,16,23-tetra-tert-butyl-29H,31H-phthalocyanine dihydroxide) to boost the bactericidal effect against Gram-positive and Gram-negative bacteria upon near-infrared irradiation. Förster resonance energy transfer (FRET) from the UCNP core to loaded SiPc was facilitated, while its efficiency depended on UCNP shell functionalization, which influences the SiPc penetration depth into the mesoporous silica, constituting a convenient tool to modify FRET intensity. Functionalized UCNPs displayed dark toxicity toward Gram-negative E. coli of up to 5 orders of magnitude, while Gram-positive S. aureus viability was not decreased in the dark, offering practical means for discriminating between the two bacterial strains. Directly exciting SiPc on the UNCP led to complete eradication of E. coli and a drastic decrease of colony-forming units of S. aureus of up to 7 orders of magnitude. With this study, we demonstrate strategies to potentiate antimicrobial photodynamic therapy on nanoparticular structures that can lead to next-generation photosensitizing systems based on UCNPs to help encounter and eradicate resistant bacteria, as well as for theranostics and future in vivo applications.

Herein, we present a comparative study about the photoinactivation of Staphylococcus aureus (Gram-positive model) and Escherichia coli (Gram-negative model) employing a neutral and a dicationic axially functionalized SiIV -phthalocyanine. Depending on the charge of the siloxane moiety (neutral monosaccharide or cationic ammonium salt), different interactions with the bacteria were observed, and a differential photoinactivation was facilitated. The intensity of the fluorescence labeling correlated with the photoinactivation of the two types of bacteria: While the neutral species only significantly affected the Gram-positive cells, we observed that the positively charged photosensitizer interacted both with the Gram-positive and with the Gram-negative models. The dicationic photosensitizer labeled both models with a characteristic deep-red fluorescence and photoinactivated both classes of prokaryotes. In general, our study clearly demonstrates that axially ammoniumsiloxane-functionalized Si(IV) phthalocyaninates constitute excellent photosensitizers due to their weak aggregation in aqueous environments. In particular, we also show that charge-based targeting with axial ammonium groups leads toward broad-spectrum SiIV -phthalocyanines for photodynamic inactivation of bacteria.

The photophysical dynamics of three complexes in the highly-emissive [Ir(pqi)2(NN)]+ series were investigated aiming at unique photophysical features and applications in light-emitting and singlet oxygen sensitizing research fields. Rational elucidation and Franck-Condon analyses of the observed emission spectra in nitrile solutions at 298 and 77 K reveal the true emissive nature of the lowest-lying triplet excited state (T1), consisting of a hybrid 3MLCT/LCIr(pqi)→pqi state. Emissive deactivations from T1 occur mainly by very intense, yellow-orange phosphorescence with high quantum yields and radiative rates. The emission nature experimentally verified is corroborated by theoretical calculations (TD-DFT), with T1 arising from a mixing of several transitions induced by the spin-orbit coupling, majorly ascribed to 3MLCT/LCIr(pqi)→pqi and increasing contributions of 3MLCT/LLCTIr(pqi)→NN. The microsecond-lived emission of T1 is rapidly quenched by molecular oxygen, with an efficient generation of singlet oxygen. Our findings show that the photophysics of [Ir(pqi)2(NN)][PF6] complexes is suitable for many applications, from the active layer of electroluminescent devices to photosensitizers for photodynamic therapy and theranostics.

Herein we report on the implementation of photofunctional microparticles in combination with optical tweezers for the investigation of bacterial responses to oxidative stress by means of quantitative functional microscopy. A combination of a strongly hydrophobic axially substituted Si(IV) phthalocyanine adsorbed onto silica microparticles was developed, and the structural and photophysical characterization was carried out. The microparticles are able to produce reactive oxygen species under the fluorescence microscope upon irradiation with red light, and the behavior of individual bacteria can be consequently investigated in situ and in real time at the single cell level. For this purpose, a methodology was introduced to monitor phototriggered changes with spatiotemporal resolution. The defined distance between the photoactive particles and individual bacteria can be fixed under the microscope before the photosensitization process is started, and the photoinduced damage can be monitored by tracing the time-dependent fluorescence turn-on of a suitable marker. The results showed a distance-dependent photoinduced death time, defined as the onset of the incorporation of propidium iodide. Our methodology constitutes a new tool for the in vitro design and evaluation of photosensitizers for the treatment of cancer and infectious diseases with the aid of functional optical microscopy, as it enables a quantitative response evaluation of living systems toward oxidative stress. More generally, it provides a way to understand the response of an ensemble of living entities to reactive oxygen species by analyzing the behavior of a set of individual organisms.

Antimicrobial Photodynamic Inactivation (PDI) represents an attractive alternative in the treatment of infections by antibiotic-resistant pathogenic bacteria. In PDI a photosensitizer (PS) is administered to the site of the biological target in order to generate cytotoxic singlet oxygen which reacts with the biological membrane upon application of harmless visible light. Established methods for testing the photoinduced cytotoxicity of PSs rely on the observation of the whole bacterial ensemble providing only a population-averaged information about the overall produced toxicity. However, for a deeper understanding of the processes that take place in PDI, new methods are required that provide simultaneous regulation of the ROS production, monitoring the subsequent damage induced in the bacteria cells, and full control of the distance between the bacteria and the center of the singlet oxygen production. Herein we present a novel method that enables the quantitative spatio-time-resolved analysis at the single cell level of the photoinduced damage produced by transparent microspheres functionalized with PSs. For this purpose, a methodology was introduced to monitor phototriggered changes with spatiotemporal resolution employing holographic optical tweezers and functional fluorescence microscopy. The defined distance between the photoactive particles and individual bacteria can be fixed under the microscope before the photosensitization process, and the photoinduced damage is monitored by tracing the fluorescence turn-on of a suitable marker. Our methodology constitutes a new tool for the in vitro design and analysis of photosensitizers, as it enables a quantitative response evaluation of living systems towards oxidative stress.

Herein, we present a straightforward strategy to disperse highly insoluble photosensitizers in aqueous environments, without major synthetic efforts and keeping their photosensitizing abilities unaffected. A layered nanoclay was employed to adsorb and to solubilize a highly efficient yet hydrophobic Si(IV) phthalocyaninate in water. The aggregation of the photoactive dye was correlated with its photophysical properties, particularly with the ability to produce highly cytotoxic singlet oxygen. Moreover, the resulting hybrid nanomaterial is able to selectively photoinactivate Gram-positive pathogens, due to local interactions between the bacterial membranes and the negatively charged nanodiscs. Nanotoxicity assays confirmed its innocuousness toward eukaryotic cells, showing that it constitutes a new class of "phototriggered magic bullet" for the inactivation of pathogens in phototherapy, as well as in the development of coatings for self-disinfecting surfaces.

Novel organic-inorganic hybrid materials comprising nanoscaled layered silicates and native aluminium hydroxide phthalocyanine (Al(OH)Pc) allowed for the first time the exploitation of their unique photophysical properties in aqueous ambience. In particular, we were able to observe the efficient emission of Al(OH)Pc-nanoclay hybrids and generation of singlet oxygen in aqueous solution.

Herein we report the self-assembly of a supramolecular singlet oxygen photosensitizing system from an adamantane-functionalized, hexaanionic water-soluble zinc(II) phthalocyanine (PC) and β-cyclodextrin vesicles (CDV). Characterisation of the designed PC, which was synthesized by an asymmetric statistical condensation, was carried out by several analytical techniques such as MALDI-HRMS, NMR, IR, UV/vis as well as steady state and time resolved fluorescence spectroscopy. The influence of the docking of the PC to the CDVs on the PC photoluminescence as well as on the singlet oxygen photoproduction quantum yields was investigated. The results indicate that the host–guest interaction of the photosensitizer and the CDVs significantly prevents the formation of inactive aggregates, and enhances the photosensitizing ability of the PC. The supramolecular assembly constitutes a biocompatible photoactive platform for the design of phototherapeutic agents.

In this work, we have quantified for the first time the fluorescence and singlet oxygen quantum yields of a silicon(IV) phthalocyanine bound to the surface of zeolite L nanocrystals. The photophysical properties were correlated with the absorption spectra and the morphology of the nanoparticles, and most importantly, with the fraction of photoactive chromophores. By comparison with the fluorescence and singlet oxygen quantum yields of the free phthalocyaninate in dilute solution (ΦF = 0.50 and Φ∆ = 0.50, respectively), we conclude that for the most efficient nanoparticles nearly 80% of chromophores are active as monomeric units on the surface, as indicated by the corresponding quantum yields (ΦF = 0.40 and Φ∆ = 0.40). We further functionalized and raised the ζ‐potential of the best performing nanomaterial to improve its water dispersibility. The functionalization was monitored by thermogravimetric analysis and time‐of‐flight secondary‐ion mass spectrometry, and its influence on the photophysical properties was assessed. The resulting nanomaterials are capable of establishing stable suspensions in water while retaining the ability to form reactive oxygen species upon irradiation with red light. This provides a basis for the rational design of photoactive nanomaterials for photodynamic therapy or water decontamination.