Surface topography plays a key role in the colonization of substrata by the colonizing stages of marine fouling organisms. For the innovation of marine antifouling coatings, it is essential to understand how topographic cues affect the settlement of these organisms. In this study, tapered, spiked microstructures and discrete honeycombs of varying feature dimensions were designed and fabricated in order to examine the influence of topography on the attachment of zoospores of the green macroalga Ulva linza and cells of the diatom (microalga) Navicula incerta. Contrasting results were obtained with these two species of algae. Indeed, the preferred location of cells of N. incerta was dominated by attachment point theory, which suggested a positive correlation between the density of cells adhering and the amount of available attachment points, while the settlement of spores of U. linza was mainly regulated by both Wenzel roughness and local binding geometry.

Marine biofouling has detrimental effects on the environment and economy, and current antifouling coatings research is aimed at environmentally benign, non-toxic materials. The possibility of using contact-active coatings is explored, by considering the antialgal activity of cationic poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) brushes. The antialgal activity was investigated via zoospore settlement and sporeling growth assays of the marine algae Ulva linza and U. lactuca. The assay results for PDMAEMA brushes were compared to those for anionic and neutral surfaces. It was found that only PDMAEMA could disrupt zoospores that come into contact with it, and that it also inhibits the subsequent growth of normally settled spores. Based on the spore membrane properties, and characterization of the PDMAEMA brushes over a wide pH range, it is hypothesized that the algicidal mechanisms are similar to the bactericidal mechanisms of cationic polymers, and that further development could lead to successful contact-active antialgal coatings.

A set of controlled surface composition films was produced utilizing amphiphilic block copolymers dispersed in a cross-linked poly(dimethylsiloxane) network. These block copolymers contained oligo(ethylene glycol) (PEGMA) and fluoroalkyl (AF6) side chains in selected ratios and molecular weights to control surface chemistry including antifouling and fouling-release performance. Such properties were assessed by carrying out assays using two algae, the green macroalga Ulva linza (favors attachment to polar surfaces) and the unicellular diatom Navicula incerta (favors attachment to nonpolar surfaces). All films performed well against U. linza and exhibited high removal of attached sporelings (young plants) under an applied shear stress, with the lower molecular weight block copolymers being the best performing in the set. The composition ratios from 50:50 to 60:40 of the AF6/PEGMA side groups were shown to be more effective, with several films exhibiting spontaneous removal of the sporelings. The cells of N. incerta were also removed from several coating compositions. All films were characterized by surface techniques including captive bubble contact angle, atomic force microscopy, and near edge X-ray absorption fine structure spectroscopy to correlate surface chemistry and morphology with biological performance.

A series of eight novel siloxane-polyurethane fouling-release (FR) coatings were assessed for their FR performance in both the laboratory and in the field. Laboratory analysis included adhesion assessments of bacteria, microalgae, macroalgal spores, adult barnacles and pseudobarnacles using high-throughput screening techniques, while field evaluations were conducted in accordance with standardized testing methods at three different ocean testing sites over the course of six-months exposure. The data collected were subjected to statistical analysis in order to identify potential correlations. In general, there was good agreement between the laboratory screening assays and the field assessments, with both regimes clearly distinguishing the siloxane-polyurethane compositions comprising monofunctional poly(dimethyl siloxane) (PDMS) (m-PDMS) as possessing superior, broad-spectrum FR properties compared to those prepared with difunctional PDMS (d-PDMS). Of the seven laboratory screening techniques, the Cellulophaga lytica biofilm retraction and reattached barnacle (Amphibalanus amphitrite) adhesion assays were shown to be the most predictive of broad-spectrum field performance.

The resistance of charged polymers to biofouling was investigated by subjecting cationic (PDMAEMA), anionic (PSPMA), neutral (PHEMA-co-PEG 10 MA), and zwitterionic (PSBMA) brushes to assays testing protein adsorption; attachment of the marine bacterium Cobetia marina; settlement and adhesion strength of zoospores of the green alga Ulva linza; settlement of barnacle (Balanus amphitrite and B. improvisus) cypris larvae; and field immersion tests. Several results go beyond the expected dependence on direct electrostatic attraction; PSPMA showed good resistance towards attachment of C. marina, low settlement and adhesion of U. linza zoospores, and significantly lower biofouling than on PHEMA-co-PEG 10 MA or PSBMA after a field test for one week. PDMAEMA showed potential as a contact-active anti-algal coating due to its capacity to damage attached spores. However, after field testing for eight weeks, there were no significant differences in biofouling coverage among the surfaces. While charged polymers are unsuitable as antifouling coatings in the natural environment, they provide valuable insights into fouling processes, and are relevant for studies due to charging of nominally neutral surfaces.

Novel methacrylate copolymers containing polysiloxane (SiMA) and mixed poly(ethyleneglycol)-perfluorohexyl side chains (MEF) were synthesised and dispersed as surface-active additives in crosslinked PDMS films.

Surface-active copolymers of a styrene carrying a polysiloxane side chain (SSi) and a triethyleneglycol monomethyl ether-modified pentafluorostyrene (EFS) (39 and 77 mol% EFS) were prepared and incorporated (8 wt% loading) into a polydimethyl siloxane (PDMS) matrix to produce crosslinked blend films. The wettability of the surface-active copolymer films and PDMS-blend films was investigated by contact angle measurements. An angle-resolved X-ray photoelectron spectroscopy (XPS) of the surface chemical composition before and after immersion in water for 7 days enabled location of the hydrophilic oxyethylenic segments of EFS within the top 10 nm from the film surface. Laboratory bioassays on the blend films against the marine green alga Ulva linza evidenced that the films containing the copolymer with the larger EFS content showed greater resistance to settlement of zoospores of U. linza, whereas both films had superior fouling-release properties of sporelings (young plants) compared to the PDMS standard films. (C) 2015 Elsevier B.V. All rights reserved.

Amphiphilic coatings are promising candidates for fouling-release applications. As hydrophilic components, polysaccharides are interesting and environmentally benign building blocks. We used covalently coupled alginic acid (AA) and hyaluronic acid (HA) and postmodified them with a hydrophobic fluorinated amine. The surfaces showed good stability under marine conditions and fluorination led to a decreased uptake of Ca(2+) ions after modification. In single species settlement assays (bacteria, diatoms, barnacle cypris larvae), the modification decreased the settlement density and/or the adhesion strength of many of the tested species. Field studies supported findings of the laboratory experiments, as hydrophobic modification of AA and HA decreased diatom colonization.

The successful formulation of two-part condensation-curing silicone materials via purely organic catalysis is here developed and investigated as fouling-release coating. Several non-toxic organic catalysts and their 'onium' salts were studied as potential purely organic catalysts on the silicone condensation reaction but also on the properties of the resulting cured resins. The trifluoroacetic acid was pointed suitable for the production of condensation-curing silicone coatings. To assess favorable fouling-release properties, multi-wall carbon nanotubes (0.05-0.2 wt-%) were added to the resin. Interestingly, the catalytic activity of the trifluoroacetic acid proved not affected by the presence of the nanocharge. The properties of the coatings prepared using 0.1 wt-% acid revealed constant degree of crosslinking independently of the carbon nanotubes loading and pronounced surface nanostructuring suitable for fouling release. This final property was tested against Ulva linza sporelings and revealed that the coatings are highly suitable for fouling-release applications.

Block copolymers made from a poly(dimethyl siloxane) (Si) and a poly(meth) acrylate carrying oxyethylene (EG) or fluoroalkyl (AF) side chains were synthesized and incorporated as surface-active components into a silicone matrix to produce cross-linked films with different surface hydrophilicity/phobicity. Near-edge X-ray absorption fine structure (NEXAFS) studies showed that film surfaces containing Si-EG were largely populated by the siloxane, with the oxyethylene chains present only to a minor extent. In contrast, the fluorinated block was selectively segregated to the polymer-air interface in films containing Si-AF as probed by NEXAFS and X-ray photoelectron spectroscopy (XPS) analyses. Such differences in surface composition were reflected in the biological performance of the coatings. While the films with Si-EG showed a higher removal of both Ulva linza sporelings and Balanus amphitrite juveniles than the silicone control, those with Si-AF exhibited excellent antifouling properties, preventing the settlement of cyprids of B. amphitrite.

Well-defined amphiphilic pentablock copolymers Siy-(EGx-FAz)(2) composed of polysiloxane (Si), polyethylene glycol (EG), and perfluorohexylethyl polyacrylate (FA) blocks are synthesized by ATRP of FA monomer starting from a difunctional bromo-terminated macroinitiator. Diblock copolymers EGx-FAz are also synthesized as model systems. The block copolymers are used, either alone or blended with a PDMS matrix in varied loadings, to prepare antibiofouling coatings. Angle-resolved XPS and contact angle measurements show that the coating surface is highly enriched in fluorine content but undergoes reconstruction after contact with water. Protein adsorption experiments with human serum albumin and calf serum highlight that diblock copolymers resist protein adhesion better than do pentablock copolymers. Blending of the pentablock copolymer with PDMS results in increased protein adsorption. By contrast, the PDMS-matrix coatings show high removal percentages of sporelings of the green fouling alga Ulva linza. (c) 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015, 53, 1213-1225

Hydration and chain entanglement determines the optimum thickness of poly(HEMA-co-PEG10MA) brushes for effective antifouling properties

Amphiphilic surfaces, having both hydrophobic and hydrophilic properties, have been considered for marine antifouling and fouling release applications, as they may provide an environmentally friendly non‐biocidal alternative for surface coating. Here, we report a new class of polymers modified with amphiphilic side chains constructed from non‐natural oligopeptides. These non‐natural amino acids have a diverse array of functionalities and polarities that can be arranged in any sequence to optimize antifouling and fouling release behavior. Because of advances in solid state peptide synthesis, these peptides can be prepared on a multiple gram scale in a short period of time. Different sequences of non‐natural amino acids were synthesized to determine the effect on the physical and antifouling properties of the surface. These oligopeptide sequences were attached to a PS‐ b ‐P(DMS‐ stat ‐MVS) diblock copolymer using thiol‐ene “click” chemistry. The modified polymers were spray coated onto treated glass slides and characterized using water bubble contact angle measurements and near‐edge X‐ray absorption fine structure. The coatings were tested for antifouling and fouling release performance against spores and sporelings (young plants), respectively, of the green seaweed (alga) Ulva linza and also for non‐specific protein absorption. Copyright © 2015 John Wiley & Sons, Ltd.

An approach to the design of polyurethane coatings having amphiphilic/zwitterionic surfaces via a self-stratification approach has been explored for marine non-fouling applications. Zwitterionic materials such as poly(sulfobetaine methacrylate) poly(SBMA), are used as non-fouling materials due to their protein resistance properties. ABA-type triblock copolymers, poly(SBMA)-block-PDMS-block-poly(SBMA), having PDMS as the central block and poly(SBMA) as the flanking blocks with secondary amines at the junction points were synthesized using ring opening equilibration polymerization (ROEP), Michael addition and atom transfer radical polymerization (ATRP). A series of triblocks were synthesized and incorporated into a polyurethane coating system and were evaluated for water contact angle (WCA), surface energy (SE) and pseudobamacle adhesion (PB). The fouling-release (FR) performance of the coatings was evaluated in the laboratory using a suite of representative marine organisms. The coatings showed excellent FR performance toward the bacterium Halomonas pacifica and the diatom (microalga) Navicula incerta while the bacterium Cellulophaga lytica and sporelings of the green macroalga Ulva linza showed a relatively higher affinity for amphiphilic coating surfaces when compared to a series of standard control coatings. (C) 2014 Elsevier B.V. All rights reserved.

The antifouling (AF) properties of oligo(lactose)-based self-assembled monolayers (SAMs), using four different proteins, zoospores of the green alga Ulva linza and cells of the diatom Navicula incerta, were investigated. The SAM-forming alkylthiols, which contained 1, 2 or 3 lactose units, showed significant variation in AF properties, with no differences in wettability. Non-specific adsorption of albumin and pepsin was low on all surfaces. Adsorption of lysozyme and fibrinogen decreased with increasing number of lactose units in the SAM, in agreement with the generally observed phenomenon that thicker hydrated layers provide higher barriers to protein adsorption. Settlement of spores of U. linza followed an opposite trend, being greater on the bulkier, more hydrated SAMs. These SAMs are more ordered for the larger saccharide units, and it is therefore hypothesized that the degree of order, and differences in crystallinity or stiffness between the surfaces, is an important parameter regulating spore settlement on these surfaces.

Interaction of zoospores of Ulva linza with cationic, arginine-rich oligopeptide self-assembled monolayers (SAMs) is characterized by rapid settlement. Some spores settle (ie permanently attach) in a 'normal' manner involving the secretion of a permanent adhesive, retraction of the flagella and cell wall formation, whilst others undergo 'pseudosettlement' whereby motile spores are trapped (attached) on the SAM surface without undergoing the normal metamorphosis into a settled spore. Holographic microscopy was used to record videos of swimming zoospores in the vicinity of surfaces with different cationic oligopeptide concentrations to provide time-resolved insights into processes associated with attachment of spores. The data reveal that spore attachment rate increases with increasing cationic peptide content. Accordingly, the decrease in swimming activity in the volume of seawater above the surface accelerated with increasing surface charge. Three-dimensional trajectories of individual swimming spores showed a 'hit and stick' motion pattern, exclusively observed for the arginine-rich peptide SAMs, whereby spores were immediately trapped upon contact with the surface.

A number of organisms is routinely used in laboratory assays (i) to enable the down-selection of coating libraries and (ii) to test hypotheses in relation to settlement/adhesion on model/practical surfaces. Settlement and fouling-release assays are described for bacteria, algae (Ulva sp. and diatoms) and barnacles.

Among the first events after immersion of surfaces in the ocean is surface 'conditioning'. Here, the accumulation and composition of the conditioning films formed after immersion in the ocean are analyzed. In order to account for different surface chemistries, five self-assembled monolayers that differ in resistance to microfouling and wettability were used. Water samples from two static immersion test sites along the east coast of Florida were collected at two different times of the year and used for experiments. Spectral ellipsometry revealed that conditioning films were formed within the first 24 h and contact angle goniometry showed that these films changed the wettability and rendered hydrophobic surfaces more hydrophilic and vice versa. Infrared reflection adsorption spectroscopy showed that the composition of the conditioning film depended on both the wettability and immersion site. Laboratory and field assays showed that the presence of a conditioning film did not markedly influence settlement of microorganisms.