Drive-induced unwanted state transitions (DUST) are limiting both for microwave readout and parametric operations of superconducting qubits. Among them, measurement-induced state transitions (MIST) are due to intrinsic resonances described by the readout Hamiltonian. They were previously studied with a qubit linearly coupled to its readout mode, which constitutes the usual readout Hamiltonian. Since MIST can appear even at moderate powers, they limit the readout signal-to-noise ratio and the quantum nondemolition readout fidelity. In this work, we study the high-power readout regime in a different transmon readout scheme, implementing a nonlinear coupling called the cos gyp-coupling. This coupling stems from a transmon molecule circuit and has symmetry properties that suppress nonparity-conserving MIST. We succeed in performing multistate single-shot readout up to the fifth excited state of the transmon, which enables us to identify leakage pathways from the computational subspace. The measurements indicate that the system is free of MIST up to high powers, with more than 300 photons in the readout mode. The MIST can be controllably turned on by breaking the parity symmetry of the coupling using flux-tuning. These experimental results are corroborated by branch analysis and simulations of the classical chaotic dynamics, showing that the cos gyp-coupling is very robust to readout photons compared to the usual transverse coupling.
Drive-induced unwanted state transitions (DUST) are limiting both for microwave readout and parametric operations of superconducting qubits. Among them, measurement-induced state transitions (MIST) are due to intrinsic resonances described by the readout Hamiltonian. They were previously studied with a qubit linearly coupled to its readout mode, which constitutes the usual readout Hamiltonian. Since MIST can appear even at moderate powers, they limit the readout SNR and the QND readout fidelity. In this work, we study the high-power readout regime in a different transmon readout scheme, implementing a nonlinear coupling called the cosϕ-coupling. This coupling stems from a transmon molecule circuit and has symmetry properties that suppress nonparity-conserving MIST. We succeed in performing multi-state single-shot readout up to the fifth excited state of the transmon, which enables us to identify leakage pathways from the computational subspace. The measurements indicate that the system is free of MIST up to high powers, with more than 300 photons in the readout mode. The MIST can be controllably turned on by breaking the parity symmetry of the coupling using flux-tuning. These experimental results are corroborated by branch analysis and simulations of the classical chaotic dynamics, showing that the cosϕ-coupling is very robust to readout photons compared to the usual transverse coupling.
Rapid thermal cycling is a central bottleneck in the development of superconducting quantum devices: conventional dilution refrigerators require cooldowns of a day or more and substantial cryogenic infrastructure, which throttles the fabricate-measure-redesign loop. We present an ultracompact dilution refrigerator (3 kg in mass and 100 mm in diameter) that completes a full cooldown-warm-up cycle to a base temperature of 70 mK in 1.2 hours when unloaded, and in 2.1 hours when fully equipped with the microwave wiring required for qubit measurements, while delivering 20 microW of cooling power at 100 mK. We validate the platform through a complete characterization of a two-fluxonium device: we extract the full circuit Hamiltonian by two-tone spectroscopy, measure energy-relaxation and coherence times, and benchmark single-qubit control. Although the relaxation time is limited by the base temperature of the system, we reach a single-qubit gate fidelity of up to 99
Improving the coherence of superconducting qubits is essential for advancing quantum technologies. While superconductors are theoretically perfect conductors, they consistently exhibit residual energy dissipation when driven by microwave currents, limiting coherence times. Here, we report an empirical scaling relation between microwave dissipation and the superfluid density, a bulk property of superconductors related to charge carrier density and disorder. Our analysis spans a wide range of superconducting materials and device geometries, from highly disordered amorphous films to ultraclean systems with record-high quality factors, including resonators, three-dimensional cavities, and transmon qubits. This scaling reveals an intrinsic bulk dissipation channel, independent of surface dielectric losses, which we attribute to nonequilibrium quasiparticles trapped within disorder-induced spatial variations of the superconducting gap, with a density set by a universal material parameter. Our findings identify an empirical coherence limit associated with intrinsic material properties and provide a data-driven basis for materials selection in future superconducting quantum circuits.
Silicon-on-insulator technology is widely used to fabricate silicon based devices, from advanced transistors to photonic circuits or nanomechanical systems. Integrating low loss superconducting quantum circuits with silicon-on-insulator substrates enables to couple the advantages offered by the mature silicon technology to the exquisite sensitivity of superconducting circuits. The natural approach, inherited from research in superconducting microwave devices, is to use a substrate made with highly resistive silicon, known for its low level of microwave losses. In this work, using superconducting microwave resonators, we show that counterintuitively, standard resistivity silicon-on-insulator substrates perform better than high resistivity silicon-on-insulator substrates at cryogenic temperatures. In the latter case, the presence of a parasitic sheet conduction at the interface between bulk silicon and silicon oxide acts as the dominant loss mechanism. This parasitic sheet can be suppressed using substrates with intentionally induced traps. In such substrates, losses are ultimately limited by the dielectric losses of the silicon oxide layer. These substrates offer interesting perspectives for the development of superconducting nanoelectromechanical systems. First, the release, i.e. the removal of the silicon oxide, could be limited to the moving parts, thereby maintaining the mechanical integrity of the rest of the device. Additionally, such structure would enhance heat evacuation into the bulk of the substrate which is an issue in current devices such as microwave-to-optics converters.
A search for cosmological axions has been performed by scanning a frequency region of 38 MHz centered at about 10.2 GHz, corresponding to an axion mass m a ≃ 42 μ eV . The QUAX experimental apparatus, a haloscope comprised of a 1-liter volume tunable cavity immersed in an 8 T magnetic field and a quantum-limited detection chain, set limits on the axion-photon coupling at the 10 − 14 GeV − 1 level. As no signal candidate has been observed, viable hadronic axion models are ruled out in a currently preferred postinflationary region m a > 40 μ eV .
In the past decade, the microwave quantum electronics toolbox has been enriched with quantum limited detection devices such as traveling-wave parametric amplifiers (TWPAs). The extreme sensitivity that they provide is not only mandatory for some physics applications within quantum information processing, but is also the key element that will determine the detection limit of quantum sensing setups. In the framework of microwave optomechanical systems, an unprecedented range of small motions and forces is accessible, for which a specific quantitative calibration becomes necessary. We report on near quantum limited measurements performed with an aluminum drumhead mechanical device within the temperature range 4-400 mK. The whole setup is carefully calibrated, especially taking into account the power dependence of microwave absorption in the superconducting optomechanical cavity. This effect is commonly attributed to two-level systems (TLSs) present in the metal oxide. We demonstrate that a similar feature exists in the TWPA, and can be phenomenologically fitted with adapted expressions. If not taken into account, the error on the signal strength can be as large as a factor of about 2, which is unacceptable for quantitative experiments. The power and temperature dependence is studied over the full parameter range, leading to an absolute definition of the phonon population (i.e., Brownian-motion amplitude), with an uncertainty +/- 20% limited by sources of noise internal to the optomechanical element.
Superconducting traveling-wave parametric amplifiers (TWPAs) are increasingly used in various applications, including quantum computing, quantum sensing, and dark matter detection. However, one important characteristic of these amplifiers, gain compression, has not received much attention. As a result, there is a lack of comprehensive experimental exploration of this phenomenon in the existing literature. In this study, we present an experimental investigation of gain compression in a Josephson traveling-wave parametric amplifier based on a four-wave mixing process. We have implemented a novel setup to monitor the complex transmission of both the pump and signal tones, which allows us to simultaneously track pump depletion and signal amplification as functions of signal power and frequency across the entire bandwidth of the device. Our findings indicate that, while pump depletion occurs during gain compression, it is not the only mechanism involved in the saturation of a TWPA. Power-induced phase-matching processes also take place within the device. This study provides valuable insights for optimizing TWPAs for applications that require high total input power, such as multiplexed qubit readout or broadband photon emission.
In the last decade, the microwave quantum electronics toolbox has been enriched with quantum-limited detection devices such as Traveling Wave Parametric Amplifiers (TWPAs). The extreme sensitivity they provide is not only mandatory for some physics applications within quantum information processing, but is also the key element that will determine the detection limit of quantum sensing setups. In the framework of microwave optomechanical systems, an unprecedented range of small motions and forces is accessible, for which a specific quantitative calibration becomes necessary. We report on near quantum-limited measurements performed with an aluminum drumhead mechanical device within the temperature range 4 mK - 400 mK. The whole setup is carefully calibrated, especially taking into account the power-dependence of microwave absorption in the superconducting optomechanical cavity. This effect is commonly attributed to Two-Level-Systems (TLSs) present in the metal oxide. We demonstrate that a similar feature exists in the TWPA, and can be phenomenologically fit with adapted expressions. If not taken into account, the error on the signal strength can be as large as a factor of about 2, which is unacceptable for quantitative experiments. The power and temperature dependence is studied over the full parameter range, leading to an absolute definition of phonon population (i.e. Brownian motion amplitude), with an uncertainty +- 20
We study spontaneous photon decay into multiple photons triggered by strong non-linearities in a superconducting quantum simulator of the boundary sine-Gordon impurity model. Previously, spectroscopic signatures of photon-conversion were reported and evidenced as resonances in the many-body spectrum of these systems. Here, we report on the observation of multi-mode fluorescence of a small Josephson junction embedded in a high impedance superconducting transmission line. Measurement of the down-converted photons is achieved using state-of-the-art broadband parametric amplifiers. Photon triplet emission is explicitly demonstrated at a given frequency as the counterpart of inelastic photon decay at three-times the emission frequency. These results open exciting prospects for the burgeoning field of many-body quantum optics and offer a direct signature of the ultra-strong light-matter coupling.
The field of superconducting qubits is constantly evolving with new circuit designs. However, when it comes to qubit readout, the use of simple transverse linear coupling remains overwhelmingly prevalent. This standard readout scheme has significant drawbacks: in addition to the Purcell effect, it suffers from a limitation on the maximal number of photons in the readout mode, which restricts the signal-to-noise ratio (SNR) and the Quantum Non-Demolition (QND) nature of the readout. Here, we explore the high-power regime by engineering a nonlinear coupling between a transmon qubit and its readout mode. Our approach builds upon previous work by Dassonneville et al. [Physical Review X 10, 011045 (2020)], on qubit readout with a non-perturbative cross-Kerr coupling in a transmon molecule. We demonstrate a readout fidelity of 99.21
Continuous quantum phase transitions are widely assumed and frequently observed in various systems of quantum particles or spins. Their characteristic trait involves scaling laws governing a second-order, gradual suppression of the order parameter as the quantum critical point is approached. The localization of Cooper pairs in disordered superconductors and the resulting breakdown of superconductivity have long stood as a prototypical example. Here, we show a departure from this paradigm, showcasing that amorphous superconducting films of indium oxide undergo a distinctive, discontinuous first-order quantum phase transition tuned by disorder. Through systematic measurements of the plasmon spectrum in superconducting microwave resonators, we provide evidence for a marked jump of both the zero-temperature superfluid stiffness and the transition temperature at the critical disorder. This discontinuous transition sheds light on the previously overlooked role of repulsive interactions between Cooper pairs and the subsequent competition between superconductivity and insulating Cooper-pair glass. Furthermore, our investigation shows that the critical temperature of the films no longer relates to the pairing amplitude but aligns with the superfluid stiffness, consistent with the pseudogap regime of preformed Cooper pairs. Our findings raise fundamental new questions into the role of disorder in quantum phase transitions and carry implications for superinductances in quantum circuits.
Superconducting travelling-wave parametric amplifiers are promising devices for the near-quantum-limited broadband amplification of microwave signals and are essential for high-quantum-efficiency microwave read-out lines. Built-in isolation, as well as gain, could address their primary limitation: a lack of true directionality due to the potential backward travel of electromagnetic radiation to their input port. Here we report a travelling-wave parametric amplifier isolator that is based on Josephson junctions. The approach uses third-order nonlinearity for amplification and second-order nonlinearity for the frequency upconversion of backward-propagating modes to provide reverse isolation. These parametric processes, enhanced by a phase-matching mechanism, exhibit gain of up to 20 dB and reverse isolation of up to 30 dB over a static 3-dB bandwidth greater than 500 MHz and maintain near-quantum-limited added noise. A Josephson-junction-based travelling-wave parametric amplifier isolator can provide gain of up to 20 dB and reverse isolation of up to 30 dB over a static 3-dB bandwidth greater than 500 MHz and maintain a near-quantum-limited added noise.
Spins in semiconductor quantum dots hold great promise as building blocks of quantum processors. Trapping them in SiMOS transistor-like devices eases future industrial scale fabrication. Among the potentially scalable readout solutions, gate-based dispersive radiofrequency reflectometry only requires the already existing transistor gates to readout a quantum dot state, relieving the need for additional elements. In this effort towards scalability, traveling-wave superconducting parametric amplifiers significantly enhance the readout signal-to-noise ratio (SNR) by reducing the noise below typical cryogenic low-noise amplifiers, while offering a broad amplification band, essential to multiplex the readout of multiple resonators. In this work, we demonstrate a 3GHz gate-based reflectometry readout of electron charge states trapped in quantum dots formed in SiMOS multi-gate devices, with SNR enhanced thanks to a Josephson traveling-wave parametric amplifier (JTWPA). The broad, tunable 2GHz amplification bandwidth combined with more than 10dB ON/OFF SNR improvement of the JTWPA enables frequency and time division multiplexed readout of interdot transitions, and noise performance near the quantum limit. In addition, owing to a design without superconducting loops and with a metallic ground plane, the JTWPA is flux insensitive and shows stable performances up to a magnetic field of 1.2T at the quantum dot device, compatible with standard SiMOS spin qubit experiments.
When a small system is coupled to a bath, it is generally assumed that the state of the bath remains unaffected by the system due to the bath's large number of degrees of freedom. Here we show theoretically that this assumption can be easily violated for photonic baths typically used in experiments involving superconducting circuits. We analyze the dynamics of a voltage-biased Josephson junction coupled to a photonic bath, represented as a long Josephson junction chain. Our findings show that the system can reach a non-equilibrium steady state where the photonic degrees of freedom become significantly overheated, leading to a qualitative change in the current-voltage I-V curve. This phenomenon is analogous to the Joule effect observed in electrical conductors, where flowing current can substantially heat up electrons. Recognizing this effect is crucial for the many applications of high-impedance environments in quantum technologies.
We investigate the effect of magnetic field on a photonic-crystal Josephson traveling-wave parametric amplifier (TWPA). We show that the observed change in photonic bandgap and plasma frequency of the TWPA can be modeled by considering the suppression of the critical current in the Josephson junctions (JJs) of the TWPA due to the Fraunhofer effect and closing of the superconducting gap. Accounting for the JJ geometry is crucial for understanding the field dependence. In one in-plane direction, the TWPA bandgap can be shifted by 2 GHz using up to 60 mT of field, without losing gain or bandwidth, showing that TWPAs without SQUIDs can be field tunable. In the other in-plane direction, the magnetic field is perpendicular to the larger side of the Josephson junctions, so the Fraunhofer effect has a smaller period. This larger side of the JJs is modulated to create the bandgap. The field interacts more strongly with the larger junctions, and as a result, the TWPA bandgap closes and reopens as the field increases, causing the TWPA to become severely compromised already at 2 mT. A slightly higher operating limit of 5 mT is found in out-of-plane field, for which the TWPA's response is hysteretic. These measurements reveal the requirements for magnetic shielding needed to use TWPAs in experiments where high fields at the sample are required; we show that with magnetic shields we can operate the TWPA while applying over 2 T to the sample.
Traveling Wave Parametric Amplifiers (TWPAs) are extensively employed in experiments involving weak microwave signals for their highly desirable quantum-limited and broadband characteristics. However, TWPAs' broadband nature comes with the disadvantage of admitting the activation of spurious nonlinear processes, such as harmonics generation, that can potentially degrade amplification performance. Here we experimentally investigate a Josephson TWPA device with SNAIL (Superconducting Nonlinear Asymmetric Inductive Element)-based unit cells focusing on the amplification behaviour along with the generation of second and third harmonics of the pump. By comparing experimental results with transient numerical simulations, we demonstrate the influence of Josephson junctions' fabrication imperfections on the occurrence of harmonics and on the gain behaviour.
Encoding quantum information in quantum states with disjoint wave-function support and noise insensitive energies is the key behind the idea of qubit protection. While fully protected qubits are expected to offer exponential protection against both energy relaxation and pure dephasing, simpler circuits may grant partial protection with currently achievable parameters. Here, we study a fluxonium circuit in which the wave-functions are engineered to minimize their overlap while benefiting from a first-order-insensitive flux sweet spot. Taking advantage of a large superinductance ($L\sim 1~\mu \rm{H}$), our circuit incorporates a resonant tunneling mechanism at zero external flux that couples states with the same fluxon parity, thus enabling bifluxon tunneling. The states $|0\rangle$ and $|1\rangle$ are encoded in wave-functions with parities 0 and 1, respectively, ensuring a minimal form of protection against relaxation. Two-tone spectroscopy reveals the energy level structure of the circuit and the presence of $4 \pi$ quantum-phase slips between different potential wells corresponding to $m=\pm 1$ fluxons, which can be precisely described by a simple fluxonium Hamiltonian or by an effective bifluxon Hamiltonian. Despite suboptimal fabrication, the measured relaxation ($T_1 = 177\pm 3 ~\mu s$) and dephasing ($T_2^E = 75\pm 5~\mu \rm{s}$) times not only demonstrate the relevance of our approach but also opens an alternative direction towards quantum computing using partially-protected fluxonium qubits.
In BCS superconductors, the superfluid stiffness is virtually constant at low temperature and only slightly affected by the exponentially low density of thermal quasiparticles. Here, we present an experimental and theoretical study on the temperature dependence of superfluid stiffness $\Theta\left(T\right)$ in a strongly disordered pseudo-gaped superconductor, amorphous $\text{InO}_{x}$, which exhibits non-BCS behavior. Experimentally, we report an unusual power-law suppression of the superfluid stiffness $\delta\Theta\left(T\right)\propto T^{b}$ at $T\ll T_{c}$, with $b\sim1.6$, which we measured via the frequency shift of microwave resonators. Theoretically, by combining analytical and numerical methods to a model of a disordered superconductor with pseudogap and spatial inhomogeneities of the superconducting order parameter, we found a qualitatively similar low-temperature power-law behavior with exponent $b\sim1.6-3$ being disorder-dependent. This power-law suppression of the superfluid density occurs mainly due to the broad distribution of the superconducting order parameter that is known to exist in such superconductors [arXiv:1012.3630], even moderately far from the superconductor-insulator transition. The presence of the power-law dependence $\delta\Theta\left(T\right)\propto T^{b}$ at low $T\ll T_{c}$ demonstrates the existence of low-energy collective excitations; in turn, it implies the presence of a new channel of dissipation in inhomogeneous superconductors caused by sub-gap excitations that are not quasiparticles. Our findings have implications for the use of strongly disordered superconductors as superinductance in quantum circuits.
We utilize a superconducting qubit processor to experimentally probe non-Markovian dynamics of an entangled qubit pair. We prepare an entangled state between two qubits and monitor the evolution of entanglement over time as one of the qubits interacts with a small quantum environment consisting of an auxiliary transmon qubit coupled to its readout cavity. We observe the collapse and revival of the entanglement as a signature of quantum memory effects in the environment. We then engineer the non-Markovianity of the environment by populating its readout cavity with thermal photons to show a transition from non-Markovian to Markovian dynamics, ultimately reaching a regime where the quantum Zeno effect creates a decoherence-free subspace that effectively stabilizes the entanglement between the qubits.