Improvements in circuit design and, more recently, in materials and surface cleaning have contributed to a rapid development of coherent superconducting qubits. However, organic resists commonly used for shadow evaporation of Josephson junctions (JJs) pose limitations due to residual contamination, poor thermal stability, and compatibility under typical surface-cleaning conditions. To provide an alternative, we developed an inorganic SiO2/Si3N4 on-chip stencil lithography mask for JJ fabrication. The stencil mask is resilient to aggressive cleaning agents and it withstands high temperatures up to 1200 °C, thereby opening new avenues for JJ material exploration and interface optimization. To validate the concept, we performed shadow evaporation of Al-based transmon qubits followed by stencil mask liftoff using vapor hydrofluoric acid, which selectively etches SiO2. We demonstrate an average T1≈75±11 μs over a 200 MHz frequency range across multiple cooldowns for one device, and T1≈44±8 μs for a second device. These results confirm the compatibility of stencil lithography with state-of-the-art superconducting quantum devices and motivate further investigations into materials engineering, film deposition, and surface cleaning techniques.

Kinetic-inductance traveling-wave parametric amplifiers (KI-TWPAs) offer broadband near-quantum-limited amplification with high saturation power. Due to the high critical magnetic fields of high-kinetic-inductance materials, KI-TWPAs should be resilient to magnetic fields. In this work, we study how magnetic field and temperature affect the performance of a KI-TWPA based on a thin-NbTiN inverse microstrip with a Nb ground plane. This KI-TWPA can provide substantial signal-to-noise ratio improvement (ΔSNR) up to in-plane magnetic fields of 0.35T and out-of-plane fields of 50mT, considerably higher than what has been demonstrated with TWPAs based on Josephson junctions. The field compatibility can be further improved by incorporating vortex traps and by using materials with higher critical fields. We also find that the gain does not degrade when the temperature is raised to 3K (limited by the Nb ground plane) while ΔSNR decreases with temperature consistently with expectation. This demonstrates that KI-TWPAs can be used in experiments that need to be performed at relatively high temperatures. The operability of KI-TWPAs in high magnetic field opens the door to a wide range of applications in spin qubits, spin ensembles, topological qubits, low-power NMR, and the search for axion dark matter.

A key challenge in quantum computing is speeding up measurement and initialization. Here, we experimentally demonstrate a dispersive measurement method for superconducting qubits that simultaneously measures the qubit and returns the readout resonator to its initial state. The approach is based on universal analytical pulses and requires knowledge of the qubit and resonator parameters, but needs no direct optimization of the pulse shape, even when accounting for the nonlinearity of the system. Moreover, the method generalizes to measuring an arbitrary number of modes and states. For the qubit readout, we can drive the resonator to $\sim 10^2$ photons and back to $\sim 10^{-3}$ photons in less than $3 \kappa^{-1}$, while still achieving a $T_1$-limited assignment error below 1\%. We also present universal pulse shapes and experimental results for qutrit readout.

We investigate the effect of magnetic field on a photonic-crystal Josephson traveling-wave parametric amplifier (TWPA). We show that the observed change in photonic bandgap and plasma frequency of the TWPA can be modeled by considering the suppression of the critical current in the Josephson junctions (JJs) of the TWPA due to the Fraunhofer effect and closing of the superconducting gap. Accounting for the JJ geometry is crucial for understanding the field dependence. In one in-plane direction, the TWPA bandgap can be shifted by 2 GHz using up to 60 mT of field, without losing gain or bandwidth, showing that TWPAs without SQUIDs can be field tunable. In the other in-plane direction, the magnetic field is perpendicular to the larger side of the Josephson junctions, so the Fraunhofer effect has a smaller period. This larger side of the JJs is modulated to create the bandgap. The field interacts more strongly with the larger junctions, and as a result, the TWPA bandgap closes and reopens as the field increases, causing the TWPA to become severely compromised already at 2 mT. A slightly higher operating limit of 5 mT is found in out-of-plane field, for which the TWPA's response is hysteretic. These measurements reveal the requirements for magnetic shielding needed to use TWPAs in experiments where high fields at the sample are required; we show that with magnetic shields we can operate the TWPA while applying over 2 T to the sample.

Recent research shows that quasiparticle-induced decoherence of superconducting qubits depends on the superconducting-gap asymmetry originating from the different thicknesses of the top and bottom films in Al/AlO$_x$/Al junctions. Magnetic field is a key tuning knob to investigate this dependence as it can change the superconducting gaps in situ. We present measurements of the parity-switching time of a field-resilient 3D transmon with in-plane field up to 0.41T. At low fields, small parity splitting requires qutrit pulse sequences for parity measurements. We measure a non-monotonic evolution of the parity lifetime with in-plane magnetic field, increasing up to 0.2T, followed by a decrease at higher fields. We demonstrate that the superconducting-gap asymmetry plays a crucial role in the observed behavior. At zero field, the qubit frequency is nearly resonant with the superconducting-gap difference, favoring the energy exchange with the quasiparticles and so enhancing the parity-switching rate. With a higher magnetic field, the qubit frequency decreases and gets detuned from the gap difference, causing the initial increase of the parity lifetime, while photon-assisted qubit transitions increase, producing the subsequent decrease at higher fields. Besides giving a deeper insight into the parity-switching mechanism in conventional transmon qubits, we establish that Al-AlO$_x$-Al JJs could be used in architectures for the parity-readout and manipulation of topological qubits based on Majorana zero modes.

Recent research shows that quasiparticle-induced decoherence of superconducting qubits depends on the superconducting-gap asymmetry originating from the different thicknesses of the top and bottom films in Al/AlOx/Al junctions. Magnetic field is a key tuning knob to investigate this dependence as it can change the superconducting gaps in situ. We present measurements of the parity-switching time of a fieldresilient three-dimensional transmon with in-plane field up to 0.41 T. At low fields, small parity splitting requires qutrit pulse sequences for parity measurements. We measure a nonmonotonic evolution of the parity lifetime with in-plane magnetic field, increasing up to 0.2 T, followed by a decrease at higher fields. We demonstrate that the superconducting-gap asymmetry plays a crucial role in the observed behavior. At zero field, the qubit frequency is nearly resonant with the superconducting-gap difference, favoring the energy exchange with the quasiparticles and so enhancing the parity-switching rate. With a higher magnetic field, the qubit frequency decreases and gets detuned from the gap difference, causing the initial increase of the parity lifetime, while photon-assisted qubit transitions increase, producing the subsequent decrease at higher fields. Besides giving a deeper insight into the parity-switching mechanism in conventional transmon qubits, we establish that Al-AlOx-Al Josephson junctions could be used in architectures for the parity-readout and manipulation of topological qubits based on Majorana zero modes.

Approaches to developing large-scale superconducting quantum processors must cope with the numerous microscopic degrees of freedom that are ubiquitous in solid-state devices. State-of-the-art superconducting qubits employ aluminium oxide (AlOx) tunnel Josephson junctions as the sources of nonlinearity necessary to perform quantum operations. Analyses of these junctions typically assume an idealized, purely sinusoidal current-phase relation. However, this relation is expected to hold only in the limit of vanishingly low-transparency channels in the AlOx barrier. Here we show that the standard current-phase relation fails to accurately describe the energy spectra of transmon artificial atoms across various samples and laboratories. Instead, a mesoscopic model of tunnelling through an inhomogeneous AlOx barrier predicts percent-level contributions from higher Josephson harmonics. By including these in the transmon Hamiltonian, we obtain orders of magnitude better agreement between the computed and measured energy spectra. The presence and impact of Josephson harmonics has important implications for developing AlOx-based quantum technologies including quantum computers and parametric amplifiers. As an example, we show that engineered Josephson harmonics can reduce the charge dispersion and associated errors in transmon qubits by an order of magnitude while preserving their anharmonicity.

Magnetic-field-resilient superconducting circuits enable sensing applications and hybrid quantum-computing architectures involving spin or topological qubits and electro-mechanical elements, as well as studying flux noise and quasiparticle loss. We investigate the effect of in-plane magnetic fields up to 1 T on the spectrum and coherence times of thin-film 3D aluminum transmons. Using a copper cavity, unaffected by strong magnetic fields, we can solely probe the magnetic-field effect on the transmons. We present data on a single-junction and a SQUID transmon, that were cooled down in the same cavity. As expected, transmon frequencies decrease with increasing fields, due to a suppression of the superconducting gap and a geometric Fraunhofer-like contribution. Nevertheless, the thin-film transmons show strong magnetic-field resilience: both transmons display microsecond coherence up to at least 0.65 T, and $T_1$ remains above 1 $\mathrm{\mu}$s over the entire measurable range. SQUID spectroscopy is feasible up to 1 T, the limit of our magnet. We conclude that thin-film aluminum Josephson junctions are a suitable hardware for superconducting circuits in the high-magnetic-field regime.

In this talk, I will give an overview of work in our group connected to quantum sensing of radio frequency photons and vibrations. In the first part of the talk, I will describe our work extending circuit QED to radio frequencies using a qubit to observe the quantisation of radio-frequency eletromagnetic fields ("radio frequency photonics"), along with cooling of the RF mode and stabilisation of non-classical quantum states of RF light. In the second part of talk, I will introduce recent work in which we have been using microwave "squid cavities" for sensing vibrations and quantised currents at radio frequencies.

Detecting weak radio-frequency electromagnetic fields plays a crucial role in a wide range of fields, from radio astronomy to nuclear magnetic resonance imaging. In quantum optics, the ultimate limit of a weak field is a single photon. Detecting and manipulating single photons at megahertz frequencies presents a challenge because, even at cryogenic temperatures, thermal fluctuations are appreciable. Using a gigahertz superconducting qubit, we observed the quantization of a megahertz radio-frequency resonator, cooled it to the ground state, and stabilized Fock states. Releasing the resonator from our control, we observed its rethermalization with nanosecond resolution. Extending circuit quantum electrodynamics to the megahertz regime, we have enabled the exploration of thermodynamics at the quantum scale and allowed interfacing quantum circuits with megahertz systems such as spin systems or macroscopic mechanical oscillators.

We demonstrate a dispersive measurement pulse shaping technique that allows for arbitrarily fast quantum non-demolition, single-quadrature measurements of non-linear systems and unconditionally leaves the measurement resonator empty. For single-qubit measurements, current measurements are limited to the 99% fidelity range due to relaxation during the process. However, trying to go to shorter times to circumvent this with square or composite digital pulses leads to leftover cavity population after measurement of the same order of error. These effects can be suppressed using simple smooth pulse shapes from a similar family of pulses as DRAG shaping, used in the context of leakage removal in superconducting qubits; here, it can be derived exactly for arbitrarily many measured modes. Beyond single qubits, the measurement pulses are fully general to dispersive measurement systems. This includes multi-qubit and multi-state (leakage) measurements where the measurement can be done in a single shot and with a single homodyne phase. Another major challenge for fast measurement is depopulating Purcell filter cavities, which we show can readily be achieved using derivative shaping. Finally, we show how to apply the technique to cascaded cavity systems, e.g~for fast remote entanglement generation.

While the on-chip processing power in circuit QED devices is growing rapidly, an open challenge is to establish high-fidelity quantum links between qubits on different chips. Here, we show entanglement between transmon qubits on different cQED chips with 49% concurrence and 73% Bell-state fidelity. We engineer a half-parity measurement by successively reflecting a coherent microwave field off two nearly identical transmon-resonator systems. By ensuring the measured output field does not distinguish vertical bar 01 > from vertical bar 01 >, unentangled superposition states are probabilistically projected onto entangled states in the odd-parity subspace. We use in situ tunability and an additional weakly coupled driving field on the second resonator to overcome imperfect matching due to fabrication variations. To demonstrate the flexibility of this approach, we also produce an even-parity entangled state of similar quality, by engineering the matching of outputs for the vertical bar 01 > and vertical bar 11 > states. The protocol is characterized over a range of measurement strengths using quantum state tomography showing good agreement with a comprehensive theoretical model.

Analog quantum simulations offer rich opportunities for exploring complex quantum systems and phenomena through the use of specially engineered, well-controlled quantum systems. A critical element, increasing the scope and flexibility of such experimental platforms, is the ability to access and tune in situ different interaction regimes. Here, we present a superconducting circuit building block of two highly coherent transmons featuring in situ tuneable photon hopping and nonlinear cross-Kerr couplings. The interactions are mediated via a nonlinear coupler, consisting of a large capacitor in parallel with a tuneable superconducting quantum interference device (SQUID). We demonstrate the working principle by experimentally characterising the system in the single-excitation and two-excitation manifolds, and derive a full theoretical model that accurately describes our measurements. Both qubits have high coherence properties, with typical relaxation times in the range of 15 to 40 μs at all bias points of the coupler. Our device could be used as a scalable building block in analog quantum simulators of extended Bose-Hubbard and Heisenberg XXZ models, and may also have applications in quantum computing such as realising fast two-qubit gates and perfect state transfer protocols.