Without requiring operational costs such as cabling and powering while maintaining reconfigurable phase-shift capability, self-sustainable reconfigurable intelligent surfaces (ssRISs) can be deployed in locations inaccessible to conventional relays or base stations, offering a novel approach to enhance wireless coverage. This study assesses the feasibility of ssRIS deployment by analyzing two harvest-and-reflect (HaR) schemes: element-splitting (ES) and time-splitting (TS). We examine how element requirements scale with key system parameters, transmit power, data rate demands, and outage constraints under both line-of-sight (LOS) and non-line-of-sight (NLOS) ssRIS-to-user equipment (UE) channels. Analytical and numerical results reveal distinct feasibility characteristics. The TS scheme demonstrates better channel hardening gain, maintaining stable element requirements across varying outage margins, making it advantageous for indoor deployments with favorable harvesting conditions and moderate data rates. However, TS exhibits an element requirement that exponentially scales to harvesting difficulty and data rate. Conversely, the ES scheme shows only linear growth with harvesting difficulty, providing better feasibility under challenging outdoor scenarios. These findings establish that TS excels in benign environments, prioritizing reliability, while ES is preferable for demanding conditions requiring operational robustness.

Cell-free massive multi-input multi-output (MIMO) promises uniform high performance across the network, but also brings a high energy cost due to joint transmission from distributed radio units (RUs) and centralized processing in the cloud. Leveraging the resource-sharing capabilities of Open Radio Access Network (O-RAN), we propose EARL, an energy-aware adaptive antenna control framework based on reinforcement learning. EARL dynamically configures antenna elements in RUs to minimize radio, optical fronthaul, and cloud processing power consumption while meeting user spectral efficiency demands. Numerical results show power savings of up to 81

This paper focuses on energy savings in downlink operation of cell-free massive MIMO (CF mMIMO) networks under dynamic traffic conditions. We propose a multi-agent deep reinforcement learning (MADRL) algorithm that enables each access point (AP) to autonomously control antenna re-configuration and advanced sleep mode (ASM) selection. After the training process, the proposed framework operates in a fully distributed manner, eliminating the need for centralized control and allowing each AP to dynamically adjust to real-time traffic fluctuations. Simulation results show that the proposed algorithm reduces power consumption (PC) by 56.23

Cell-free massive MIMO promises uniformly high performance by combining densely distributed radio units, coherent transmission, and centralized processing. Unlike earlier radio generations, it depends on dense fronthaul connectivity and a virtualized cloud-RAN architecture. In this setting, energy use is no longer driven primarily by active radio components; instead, fronthaul and processing play a dominant role, calling for a fresh perspective on what defines energy efficiency. This work introduces a modular power model that captures the interplay between radios, fronthaul, and cloud processing. The analysis highlights how design choices, such as functional splits and precoding strategies, shape both fronthaul data load and total power consumption. Centralized precoding provides stronger performance with less resource utilization, while flexible activation of radios and processing elements avoids unnecessary overhead. Overall, the energy efficiency of cell-free massive MIMO grows as antennas are more densely distributed across the coverage area, particularly when combined with end-to-end resource allocation.

This paper investigates the fundamental tradeoff between reconfigurable intelligent surfaces (RISs) and network-controlled repeaters (NCRs) in terms of achievable signal-to-noise ratio (SNR). Considering an uplink system with a multi-antenna base station (BS) and a single-antenna user equipment (UE), we derive closed-form SNR expressions for passive RIS-, active RIS-, and NCR-assisted communication under line-of-sight propagation between the BS-RIS/NCR and RIS/NCR-UE. Both narrowband and wideband transmissions are analyzed, with and without the presence of a direct BS–UE link. Our analysis reveals a key structural difference: while the SNR achieved with RISs grows unboundedly with the number of RIS elements, the SNR provided by an NCR is fundamentally limited by the UE–repeater channel due to noise amplification. Nevertheless, we show that NCRs can outperform both passive and active RISs when deployed close to the UE, provided that sufficient amplification is available. Numerical results based on realistic path loss models quantify the amplification levels required for NCRs to outperform RISs across different deployment geometries and system dimensions. These findings provide clear design guidelines for the practical integration of RISs and NCRs in future wireless networks.

Wireless fronthaul is a key enabler of flexible and scalable cell-free massive MIMO systems, but its limited capacity poses significant challenges for maintaining high and uniform user performance. In this work, we analyze the performance of a cell-free massive MIMO network with wireless fronthaul under realistic low physical layer functional splits. We propose a joint access and fronthaul resource allocation algorithm that maximizes the minimum user equipment (UE) spectral efficiency while satisfying fronthaul load constraints. Our analysis reveals that power allocation over the wireless fronthaul follows a modified water-filling structure, where the water level is jointly determined by the access and fronthaul channel gains. Furthermore, we show that severe fronthaul limitations not only reduce UE rates but also introduce spatial performance disparities depending on the cloud location. Finally, we demonstrate that split option 8 is impractical under wireless fronthaul constraints, underscoring the importance of dynamic fronthaul bit allocation to reduce fronthaul load and enable efficient system operation.

This paper investigates the uplink capacity of single-input single-output (SISO) systems assisted by a swarm of network-controlled repeaters (NCRs). We develop a rigorous wideband formulation based on OFDM signaling. Starting from the continuous-time passband model, we derive the capacity expression for the repeater-assisted OFDM channel, accounting for amplified noise contributions from multiple repeaters. Numerical results demonstrate that NCRs can substantially enhance system capacity even with simple activation strategies, and that activating only the closest repeater yields nearly the same performance as activating all repeaters, thereby offering significant energy-saving opportunities. These findings highlight the potential of NCR swarms as a cost-effective and scalable solution for coverage extension and capacity enhancement in wideband wireless networks.

Network virtualization and cloudification in Open Radio Access Networks (O-RAN) enable joint orchestration of the processing and fronthaul resources, which are essential for realizing the energy-saving potential of cell-free massive MIMO networks. To harness this potential, we investigate cell-free massive MIMO deployed over an O-RAN architecture with a wireless fronthaul that removes the need for fiber deployment. We first model the end-to-end power consumption under wireless fronthaul. Then, we propose a joint orchestration framework for radio, fronthaul, and processing resources that minimizes end-to-end power consumption while satisfying user-equipment (UE) rate requirements and wireless-fronthaul constraints. Two algorithms are developed: a scenario-sampling/group-Lasso method for centralized precoding and a block-coordinate descent method for distributed precoding. Numerical results show that centralized precoding significantly outperforms distributed precoding. End-to-end resource orchestration provides up to 70

In the design of a metasurface-assisted system for indoor environments, it is essential to take into account not only the performance gains and coverage extension provided by the metasurface but also the operating costs brought by its reconfigurability, such as powering and cabling. These costs can present challenges, particularly in indoor dense spaces (IDSs). A self-sustainable reconfigurable intelligent surface (ssRIS), which retains reconfigurability unlike a static metasurface (SMS), achieves a lower operating cost than a reconfigurable intelligent surface (RIS) by being self-sustainable through power harvesting. In this paper, in order to find a better trade-off between metasurface gain, coverage, and operating cost, the design and performance of an ssRIS-assisted indoor mmWave communication system are investigated. We simplify the use of the ssRIS by considering a preset-based element splitting scheme for maintaining self-sustainability and the formation of coverage groups by associating ssRISs with the closest user equipments (UEs). We propose a two-stage iterative algorithm to maximize the minimum data rate by jointly deciding the association between the UEs and the ssRISs, the phase shifts of the ssRISs, and allocating time resources for each UE. The non-convex optimization problem is tackled using the feasible point pursuit successive convex approximation method. To understand the best scenario for using ssRIS, the resulting performance is compared with that achieved with RIS and SMS. Our numerical results indicate that ssRISs are best utilized in a small environment where self-sustainability is easier to achieve when the budget for operating costs is tight.

Millimeter-wave channel modeling for airplanes, trains, and other in-vehicle environments can be considered jointly as different variations of a general site, namely an indoor dense space (IDS). In this work, by using ray-tracing (RT) simulations, we compare the effect of frame material, user density, and geometry on the channel characteristics at 28, 39, and 60 GHz bands. We observe that temporal and spatial parameters in IDS have unique distributions some depending on the transmitter (TX)-receiver (RX) separation in comparison to the indoor office (IO) channel model. The frame material is the main determining factor of the channel characteristics, while variations in frequency bands and geometries have only a minor impact. We extend our channel modeling effort to MIMO deployment analysis to compare the validity of the proposed model in terms of coverage and spectral efficiency with the IO model. Several dominant angular intervals in the channel cause five times higher spectral efficiency gained by digital beamforming (BF) in comparison to analog BF. We observe that the path loss in IDS is more severe compared with IO, resulting in at least a 50% reduction in the coverage area.

Integrated sensing and communications (ISAC) allows networks to perform sensing alongside data transmission. While most ISAC studies focus on single-target, multi-user scenarios, multi-target sensing is scarcely researched. This letter examines the monostatic sensing performance of a multi-target massive MIMO system, aiming to minimize the sum of Cramér-Rao lower bounds (CRLBs) for target direction-of-arrival estimates while meeting user equipment (UE) rate requirements. We propose several precoding schemes, comparing sensing performance and complexity, and find that sensing-focused precoding with power allocation for communication achieves near-optimal performance with 20 times less complexity than joint precoding. Additionally, time-sharing between communication and sensing outperforms simple time division, highlighting the benefits of resource-sharing for ISAC.

The growing presence of unauthorized drones poses significant threats to public safety, underscoring the need for aerial surveillance solutions. This work proposes a cell-free integrated sensing and communication (ISAC) framework enabling drone detection within the existing communication network infrastructure, while maintaining communication services. The system exploits the spatial diversity and coordination of distributed access points (APs) in a cell-free massive MIMO architecture to detect aerial passive targets. To evaluate sensing performance, we introduce two key metrics: age of sensing (AoS), capturing the freshness of sensing information, and sensing coverage. The proposed AoS metric includes not only the transmission delays as in the existing models, but also the processing for sensing and networking delay, which are critical in dynamic environments like drone detection. We introduce an ambiguity parameter quantifying the similarity between the target-to-receiver channels for two hotspots and develop a novel network configuration strategy, including hotspot grouping, AP clustering, and sensing pilot assignment, leveraging simultaneous multi-point sensing to minimize AoS. Our results show that the best trade-off between AoS and sensing coverage is achieved when the number of hotspots sharing the same time/frequency resource matches the number of sensing pilots, indicating ambiguity as the primary factor limiting the sensing performance.

Cell-free massive MIMO (multiple-input multiple-output) is expected to be one of the key technologies in sixth-generation (6G) and beyond wireless communications, offering enhanced spectral efficiency for cell-edge user equipments by employing joint transmission and reception with a large number of antennas distributed throughout the region. However, high-resolution RF chains associated with these antennas significantly increase power consumption. To address this issue, the use of low-resolution analog-to-digital and digital-to-analog converters (ADCs/DACs) has emerged as a promising approach to balance power efficiency and performance in massive MIMO networks. In this work, we propose a novel quantized precoding algorithm tailored for cell-free massive MIMO systems, where the proposed method dynamically deactivates unnecessary antennas based on the structure of each symbol vector, thereby enhancing energy efficiency. Simulation results demonstrate that our algorithm outperforms existing methods such as squared-infinity norm Douglas-Rachford splitting (SQUID) and regularized zero forcing (RZF), achieving superior performance while effectively reducing power consumption.

Millimeter-wave network deployment is an essential and ongoing problem due to the limited coverage and expensive network infrastructure. In this work, we solve a joint network deployment and resource allocation optimization problem for a mmWave cell-free massive MIMO network considering indoor environments. The objective is to minimize the number of deployed access points (APs) for a given environment, bandwidth, AP cooperation, and precoding scheme while guaranteeing the rate requirements of the user equipments (UEs). Considering coherent joint transmission (C-JT) and non-coherent joint transmission (NC-JT), we solve the problem of AP placement, UE-AP association, and power allocation among the UEs and resource blocks jointly. For numerical analysis, we model a mid-sized airplane cabin in ray-tracing as an exemplary case for IDS. Results demonstrate that a minimum data rate of 1Gbps can be guaranteed with less than 10 APs with C-JT. From a holistic network design perspective, we analyze the trade-off between the required fronthaul capacity and the processing capacity per AP, under different network functional split options. We observe an above 600Gbps fronthaul rate requirement, once all network operations are centralized, which can be reduced to 200Gbps under physical layer functional splits.

Integrated sensing and communication (ISAC) boosts network efficiency by using existing resources for diverse sensing applications. In this work, we propose a cell-free massive MIMO (multiple-input multiple-output)-ISAC framework to detect unauthorized drones while simultaneously ensuring communication requirements. We develop a detector to identify passive aerial targets by analyzing signals from distributed access points (APs). In addition to the precision of the sensing, timeliness of the sensing information is also crucial due to the risk of drones leaving the area before the sensing procedure is finished. We introduce the age of sensing (AoS) and sensing coverage as our sensing performance metrics and propose a joint sensing blocklength and power optimization algorithm to minimize AoS and maximize sensing coverage while meeting communication requirements. Moreover, we propose an adaptive weight selection algorithm based on concave-convex procedure to balance the inherent tradeoff between AoS and sensing coverage. Our numerical results show that increasing the communication requirements would significantly reduce both the sensing coverage and the timeliness of the sensing. Furthermore, the proposed adaptive weight selection algorithm can provide high sensing coverage and reduce the AoS by 45% compared to the fixed weights, demonstrating efficient utilization of both power and sensing blocklength,

Dual connectivity is essential for sixth-generation (6G) and future networks, with carrier aggregation (CA) serving as the key technology that enhances data rates by dynamically allocating multiple frequency carriers to users. However, the constant change of carriers can introduce excessive handovers, leading to signaling overhead and latency issues. In this work, we propose a two-step carrier switching mechanism where the first step predicts the throughput and the number of handovers for given carrier switching decision parameters using different artificial intelligence (AI) mechanisms. The second step is to choose the policy that provides the best trade-off between the number of handovers and the median UE throughput. We utilize real-world traffic data on an industry-grade network simulator to train and test the proposed carrier switching algorithm. We compare four AI models in the first step: random forest, transformer, long-short-term memory (LSTM), and fully connected neural network. Our analysis demonstrates that random forest achieves superior prediction performance for median throughput and average handover frequency due to its robustness against dataset variations. Our results indicate that the number of handovers can be reduced by 40% with a 3% reduction in throughput compared to the handover-unaware baseline.

Massive multiple-input multiple-output (mMIMO) has been the core of 5G due to its ability to improve spectral efficiency and spatial multiplexing significantly; however, cell-edge users still experience performance degradation due to inter-cell interference and uneven signal distribution. While cell-free mMIMO (cfmMIMO) addresses this issue by providing uniform coverage through distributed antennas, it requires significantly more deployment cost due to the fronthaul and tight synchronization requirements. Alternatively, repeater-assisted massive MIMO (RA-MIMO) has recently been proposed to extend the coverage of cellular mMIMO by densely deploying low-cost single-antenna repeaters capable of amplifying and forwarding signals. In this work, we investigate amplification control for the repeaters for two different goals: (i) providing a fair performance among users, and (ii) reducing the extra energy consumption by the deployed repeaters. We propose a max-min amplification control algorithm using the convex-concave procedure for fairness and a joint sleep mode and amplification control algorithm for energy efficiency, comparing long- and short-term strategies. Numerical results show that RA-MIMO, with maximum amplification, improves signal-to-interference-plus-noise ratio (SINR) by over 20 dB compared to mMIMO and performs within 1 dB of cfmMIMO when deploying the same number of repeaters as access points in cfmMIMO. Additionally, our majority-rule-based long-term sleep mechanism reduces repeater power consumption by 70% while maintaining less than 1% spectral efficiency outage.

We consider a cell-free massive multiple-input multiple-output (mMIMO) network, where unmanned aerial vehicles (UAVs) equipped with multiple antennas serve as distributed UAV-access points (UAV-APs). These UAV-APs provide seamless coverage by jointly serving user equipments (UEs) with out predefined cell boundaries. However, high-capacity wireless networks face significant challenges due to fronthaul limitations in UAV-assisted architectures. This letter proposes a novel UAV-based cell-free mMIMO framework that leverages distributed UAV-APs to serve UEs while addressing the capacity constraints of wireless fronthaul links. We evaluate functional split Options 7.2 and 8 for the fronthaul links, aiming to maximize the minimum signal-to-interference-plus-noise ratio (SINR) among the UEs and minimize the power consumption by optimizing the transmit powers of UAV-APs and selectively activating them. Our analysis compares sub-6 GHz and millimeter wave (mmWave) bands for the fronthaul, showing that mmWave achieves superior SINR with lower power consumption, particularly under Option 8. Additionally, we determine the minimum fronthaul bandwidth required to activate a single UAV-AP under different split options.

In this paper, we investigate how metasurfaces can be deployed to deliver high data rates in a millimeter-wave (mmWave) indoor dense space with many blocking objects. These surfaces can either be static metasurfaces (SMSs) that reflect with fixed phase-shifts or reconfigurable intelligent surfaces (RISs) that can reconfigure their phase-shifts to the currently served user. The latter comes with an increased power, cabling, and signaling cost. To see how reconfigurability affects the network performance, we propose an iterative algorithm based on the feasible point pursuit successive convex approximation method. We jointly optimize the types and phase-shifts of the surfaces and the time portion allocated to each user equipment to maximize the minimum data rate achieved by the network. Our numerical results demonstrate that the minimum data rate improves as more RISs are introduced but the gain diminishes after some point. Therefore, introducing more reconfigurability is not always necessary. Another result shows that to reach the same data rate achieved by using 22 SMSs, at least 18 RISs are needed. This suggests that when it is costly to deploy many RISs, as an inexpensive alternative solution, one can reach the same data rate just by densely deploying more SMSs.

Cell-free massive MIMO improves the fairness among the user equipments (UEs) in the network by distributing many cooperating access points (APs) around the region while connecting them to a centralized cloud-computing unit that coordinates joint transmission/reception. However, the fiber cable deployment for the fronthaul transport network and activating all available antennas at each AP lead to increased deployment cost and power consumption for fronthaul signaling and processing. To overcome these challenges, in this work, we consider wireless fronthaul connections and propose a joint antenna activation and power allocation algorithm to minimize the end-to-end (from radio to cloud) power while satisfying the quality-of-service requirements of the UEs under wireless fronthaul capacity limitations. The results demonstrate that the proposed methodology of deactivating antennas at each AP reduces the power consumption by 50% and 84% compared to the benchmarks based on shutting down APs and minimizing only the transmit power, respectively.