ThomX is a compact x-ray source based on Compton scattering, installed at IJCLab (Laboratoire de physique des 2 infinis-Irène Joliot-Curie) in Orsay. The machine uses a small electron storage ring and an intense laser pulse stored in a high-finesse optical cavity. This article describes the various subsystems of the machine and their initial results of the commissioning, which began in mid-2021. This first commissioning phase led to the production of 1010 x-rays/s with an on-axis energy of 45 keV. The main steps to be taken to reach the nominal flux are outlined at the end. Published by the American Physical Society 2025

ThomX is a compact x-ray source based on Compton scattering, installed at IJCLab (Laboratoire de physique des 2 infinis-Irène Joliot-Curie) in Orsay. The machine uses a small electron storage ring and an intense laser pulse stored in a high-finesse optical cavity. This article describes the various subsystems of the machine and their initial results of the commissioning, which began in mid-2021. This first commissioning phase led to the production of 10^{10} x-rays/s with an on-axis energy of 45 keV. The main steps to be taken to reach the nominal flux are outlined at the end.

With the increase in laser power and finesse of optical cavities over the last decade, laboratory-size Compton sources are very promising. These sources produce X-rays through interactions between relativistic electrons and laser photons and, in term of brightness, fall between large synchrotron facilities and classical laboratory X-ray sources. The ThomX source is the French project in this field. This article first presents a state of the art of high-intensity Compton sources, then the ThomX source is briefly described, and the first results are detailed, in particular the production of the first X-rays, the acquisition of the first spectrum and the first image of the beam. Finally, the next objectives are discussed.

ThomX is a new generation Compact Compton Source. It is currently commissioned by and at the IJCLab (Laboratoire de physique des 2 infinis - Irène Joliot-Curie (UMR9012)) at Orsay. The first beam is expected at the begining of 2021. The aim of ThomX is to demonstrate the characteristics of an intense and Compact (lab-size) X-ray source based on Compton Scattering. The performances are mostly driven by the laser optical system which is above the state of the art of stored laser power. Proof of principle of various X-ray techniques will be performed thanks to the versatile ThomX beamline. Firstly, this article presents the machine description. Secondly, the issues and limits of the laser system are discussed. Then, the ThomX beamline is described and the machine status conclude the ThomX presentation. Finally, the expected performances for the next years and the possible experiments that can be made with this new machine are detailed.

We report on the optical commissioning of the high power laser beam circulator (LBC) for the high brightness Compton {\gamma}-ray source Extreme Light Infrastructure for Nuclear Physics. Tests aiming at demonstrating the optical performances of the LBC have been realized with a low-power pulsed laser-beam system and without electron beam. We show that, with the developed alignment and synchronization methods coming from the LBC design study presented in the Dupraz et al. paper [1], the LBC enhances the laser-beam power available at the interaction point (IP) by a factor in excess of 25. This corresponds to a potential of bringing the average laser-beam power in excess of 1 kW when the LBC is injected with the interaction point laser-beam pulse energy of 400 mJ at 100 Hz.