This paper presents an overview of SPIRou, the new-generation near-infrared spectropolarimeter / precision velocimeter recently installed on the 3.6-m Canada-France-Hawaii Telescope (CFHT). Starting from the two main science goals, namely the quest for planetary systems around nearby M dwarfs and the study of magnetized star / planet formation, we outline the instrument concept that was designed to efficiently address these forefront topics, and detail the in-lab and on-sky instrument performances measured throughout the intensive testing phase that SPIRou was submitted to before passing the final acceptance review in early 2019 and initiating science observations. With a central position among the newly started programmes, the SPIRou Legacy Survey (SLS) Large Programme was allocated 300 CFHT nights until at least mid 2022. We also briefly describe a few of the first results obtained in the various science topics that SPIRou started investigating, focusing in particular on planetary systems of nearby M dwarfs, transiting exoplanets and their atmospheres, magnetic fields of young stars, but also on alternate science goals like the atmospheres of M dwarfs and the Earth's atmosphere. We finally conclude on the essential role that SPIRou and the CFHT can play in coordination with forthcoming major facilities like the JWST, the ELTs, PLATO and ARIEL over the decade.

SPIRou is a new near-infrared echelle spectropolarimeter and high precision radial velocity instrument, implemented at the 3.6m Canada-France Hawaii Telescope (CFHT, Mauna Kea) in early 2018. It aims at detecting and characterizing Earth-like planets around M dwarfs and studying stellar and planetary formation in the presence of stellar magnetic field. The calibration unit, with its radial-velocity reference module, is essential to the short- and long-term precision at the level of 1 m/s. We describe the final calibration unit that has been installed. We give technical results such as thermal background level, lamps flux level, lamps stability, and report some technical issues with their solution.

Introduction: Severe malnutrition due to protein deficiency is still a problem in industrialized countries. Here we present a case of a male infant with severe dermatitis and oedema fed with rice milk due to milk protein allergy.

Context. The performance of interferometers has largely been increased over the last ten years. But the number of observable objects is still limited due to the low sensitivity and imaging capability of the current facilities. Studies have been done to propose a new generation of interferometers. Aims. The Carlina concept studied at the Haute-Provence Observatory consists in an optical interferometer configured as a diluted version of the Arecibo radio telescope: above the diluted primary mirror made of fixed co-spherical segments, a helium balloon or cables suspended between two mountains and/or pylons, carries a gondola containing the focal optics. This concept does not require delay lines. Methods. Since 2003, we have been building a technical demonstrator of this diluted telescope. The main goals of this project were to find the opto-mechanical solutions to stabilize the optics attached under cables at several tens of meters above the ground, and to characterize this diluted telescope under real conditions. In 2012, we have obtained metrology fringes, and co-spherized the primary mirrors within one micron accuracy. In 2013, we have tested the whole optical train: servo loop, metrology, and the focal gondola. Results. We obtained stellar fringes on Deneb in September 2013. In this paper, we present the characteristics of these observations: quality of the guiding, S /N reached, and possible improvements for a future system. Conclusions. It is an important step that demonstrates the feasibility of building a diluted telescope using cables strained between cliffs or pylons. Carlina, like the MMT or LBT, could be one of the first members of a new class of telescopes named Large Diluted Telescopes. Its optical architecture has many advantages for future projects: Planet Formation Imager, Post-ELTs, Interferometer in space.

Context. The performance of interferometers has been much increased over the past ten years. But the number of observable objects is still limited by the low sensitivity and imaging capability of the current facilities. Studies have been conducted with the aim to propose a new generation of interferometers.Aims. The Carlina concept studied at the Haute-Provence Observatory consists of an optical interferometer configured as a diluted version of the Arecibo radio telescope: above the diluted primary mirror made of fixed co-spherical segments, a helium balloon or cables that are suspended between two mountains and/or pylons carry a gondola containing the focal optics. This concept does not require delay lines.Methods. Since 2003, we have been building a technical demonstrator of this diluted telescope. The main goals of this project were to find opto-mechanical solutions to stabilize the optics attached to cables at several tens of meters above the ground, and to characterize this diluted telescope under real conditions. In 2012, we obtained metrology fringes, and co-spherized the primary mirrors within one micron accuracy. In 2013, we tested the whole optical train: servo loop, metrology, and the focal gondola.Results. We obtained stellar fringes on Deneb in September 2013. We here present the characteristics of these observations: quality of the guiding, signal-to-noise ratio reached, and possible improvements for a future system.Conclusions. By detecting fringes on Deneb, we confirm that the entire system conceptually has worked correctly. It also proves that when the primary mirrors are aligned using the metrology system, we can directly record fringes in the focal gondola, even in blind operation. It is an important step that demonstrates the feasibility of building a diluted telescope using cables strained between cliffs or pylons. Carlina, like the Multiple Mirror Telescope (MMT) or Large Binocular Telescope (LBT), could be one of the first members of a new class of telescopes named large diluted telescopes. Its optical architecture has many advantages for future projects: Planet Formation Imager (PFI), post-ELTs, interferometer in space.

Studies are under way to propose a new generation of post-VLTI interferometers. The Carlina concept studied at the Haute- Provence Observatory is one of the proposed solutions. It consists in an optical interferometer configured like a diluted version of the Arecibo radio telescope: above the diluted primary mirror made of fixed cospherical segments, a helium balloon (or cables suspended between two mountains), carries a gondola containing the focal optics. Since 2003, we have been building a technical demonstrator of this diluted telescope. First fringes were obtained in May 2004 with two closely-spaced primary segments and a CCD on the focal gondola. We have been testing the whole optical train with three primary mirrors. The main aim of this article is to describe the metrology that we have conceived, and tested under the helium balloon to align the primary mirrors separate by 5-10 m on the ground with an accuracy of a few microns. The servo loop stabilizes the mirror of metrology under the helium balloon with an accuracy better than 5 mm while it moves horizontally by 30 cm in open loop by 10-20 km/h of wind. We have obtained the white fringes of metrology; i.e., the three mirrors are aligned (cospherized) with an accuracy of {\approx} 1 micron. We show data proving the stability of fringes over 15 minutes, therefore providing evidence that the mechanical parts are stabilized within a few microns. This is an important step that demonstrates the feasibility of building a diluted telescope using cables strained between cliffs or under a balloon. Carlina, like the MMT or LBT, could be one of the first members of a new class of telescopes named diluted telescopes.

We have built at the Haute-Provence observatory (France) the rst diluted telescope in the world. We describe this prototype called Carlina, made of three 25 cm mirrors separated by a maximum baseline of 10.5 m. The three mirrors in place are already coherenced and rst light is scheduled for June-July 2012. In this article, we will mainly describe the focal gondola. We propose to build in the near future a 100 m aperture Large Diluted Telescope. This diluted telescope will be more sensitive than regular interferometers (Keck, VLTI, etc.), with higher imaging capabilities. A LDT will open new elds of research in astrophysics thanks to very high angular resolution imaging of the surface of supergiant stars, AGN, gravitational micro-lens systems, exo-planets, etc.

High-precision spectrographs play a key role in exoplanet searches using the radial velocity technique. But at the accuracy level of 1 m.s-1, required for super-Earth characterization, stability of fiber-fed spectrograph performance is crucial considering variable observing conditions such as seeing, guiding and centering errors and, telescope vignetting. In fiber-fed spectrographs such as HARPS or SOPHIE, the fiber link scrambling properties are one of the main issues. Both the stability of the fiber near-field uniformity at the spectrograph entrance and of the far-field illumination on the echelle grating (pupil) are critical for high-precision radial velocity measurements due to the spectrograph geometrical field and aperture aberrations. We conducted tests on the SOPHIE spectrograph at the 1.93-m OHP telescope to measure the instrument sensitivity to the fiber link light feeding conditions: star decentering, telescope vignetting by the dome,and defocussing. To significantly improve on current precision, we designed a fiber link modification considering the spectrograph operational constraints. We have developed a new link which includes a piece of octagonal-section fiber, having good scrambling properties, lying inside the former circular-section fiber, and we tested the concept on a bench to characterize near-field and far-field scrambling properties. This modification has been implemented in spring 2011 on the SOPHIE spectrograph fibers and tested for the first time directly on the sky to demonstrate the gain compared to the previous fiber link. Scientific validation for exoplanet search and characterization has been conducted by observing standard stars.

SOPHIE is a new fiber-fed echelle spectrograph in operation since October 2006 at the 1.93-m telescope of Observatoire de Haute-Provence. Benefiting from experience acquired on HARPS (3.6-m ESO), SOPHIE was designed to obtain accurate radial velocities (~3 m/s over several months) with much higher optical throughput than ELODIE (by a factor of 10). These enhanced capabilities have actually been achieved and have proved invaluable in asteroseismology and exoplanetology. We present here the optical concept, a double-pass Schmidt echelle spectrograph associated with a high efficiency coupling fiber system, and including simultaneous wavelength calibration. Stability of the projected spectrum has been obtained by the encapsulation of the dispersive components in a constant pressure tank. The main characteristics of the instrument are described. We also give some technical details used in reaching this high level of performance.

The automatic control of the suspended mirrors is a major task in operating an interferometric gravitational wave antenna. To reach the extreme sensitivity required for this kind of detector, an accurate alignment and a stable locking of the interferometer on its working point are crucial. The solution of this problem is particularly complex in the case of a multistage pendulum, such as the suspension system for seismic isolation adopted in VIRGO. A precise knowledge of the suspension mechanical transfer functions (TFs) for different forces applied in the control servo-loops represents essential information to reach the goal. In this article, we describe the apparatus we developed to measure the VIRGO suspension TF and we report the results thus obtained on full-scale suspensions at the VIRGO site. Preliminary results for the implemented control system of the last suspension stage are also presented.

The VIRGO Central Interferometer (CITF) is a short suspended interferometer operated with the central area elements of the VIRGO detector. The main motivation behind the CITF is to allow the integration and debugging of a large part of the subsystems of VIRGO while the construction of the long arms of the antenna is being completed. This will permit a faster commissioning of the full-size antenna. In fact, almost all the main components of the CITF, with the exception of the large mirrors and a few other details, are the same as those to be used for the full-size detector. In this paper the present status of the VIRGO CITF is reported.

The present status of the VIRGO antenna, with special care of the noise limit, is presented. The VIRGO project (a French-Italian collaboration) has been approved in 1993 and it is now in the construction phase. The end of the commissioning phase is foreseen within 2001.

A transition radiation detector to identify electrons at 90% efficiency with a rejection factor against pions of 103 on an area of 2.85 × 2.85 m2 has been constructed for the NOMAD experiment. Each of its 9 modules includes a 315 plastic foil radiator and a detector plane of 176 vertical straw tubes filled with a xenon-methane gas mixture. Details of the design, construction and operation of the detector are given.