An automated system for loading samples into a microcoil NMR probe has been developed using segmented flow analysis. This approach enhanced 2-fold the throughput of the published direct injection and flow injection methods, improved sample utilization 3-fold, and was applicable to high-field NMR facilities with long transfer lines between the sample handler and NMR magnet. Sample volumes of 2 microL (10-30 mM, approximately 10 microg) were drawn from a 96-well microtiter plate by a sample handler, then pumped to a 0.5-microL microcoil NMR probe as a queue of closely spaced "plugs" separated by an immiscible fluorocarbon fluid. Individual sample plugs were detected by their NMR signal and automatically positioned for stopped-flow data acquisition. The sample in the NMR coil could be changed within 35 s by advancing the queue. The fluorocarbon liquid wetted the wall of the Teflon transfer line, preventing the DMSO samples from contacting the capillary wall and thus reducing sample losses to below 5% after passage through the 3-m transfer line. With a wash plug of solvent between samples, sample-to-sample carryover was <1%. Significantly, the samples did not disperse into the carrier liquid during loading or during acquisitions of several days for trace analysis. For automated high-throughput analysis using a 16-second acquisition time, spectra were recorded at a rate of 1.5 min/sample and total deuterated solvent consumption was <0.5 mL (1 US dollar) per 96-well plate.

ADVERTISEMENT RETURN TO ISSUEPREVCommunicationNEXTSample Concentration and Separation for Nanoliter-Volume NMR Spectroscopy Using Capillary IsotachophoresisRoger A. Kautz, Michael E. Lacey, Andrew M. Wolters, Frantisek Foret, Andrew G. Webb, Barry L. Karger, and Jonathan V. SweedlerView Author Information Barnett Institute of Chemical and Biological Analysis Northeastern University, Boston, Massachusetts 02115 Department of Chemistry, Beckman Institute, and Department of Electrical and Computer Engineering University of Illinois at Urbana-Champaign Urbana, Illinois 61801 Cite this: J. Am. Chem. Soc. 2001, 123, 13, 3159–3160Publication Date (Web):March 8, 2001Publication History Received18 August 2000Revised1 February 2001Published online8 March 2001Published inissue 1 April 2001https://doi.org/10.1021/ja005537rCopyright © 2001 American Chemical SocietyRIGHTS & PERMISSIONSArticle Views371Altmetric-Citations63LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InReddit Read OnlinePDF (46 KB) Get e-AlertsSUBJECTS:Impurities,Ions,Mixtures,Nuclear magnetic resonance spectroscopy,Probes Get e-Alerts

A general method for noncompetitive immunoassay of small analytes using affinity probe capillary electrophoresis (APCE) is demonstrated using digoxin as a model analyte. A uniform immunoreagent was prepared from a single-chain antibody (scFv) gene specific for digoxin. Site-directed mutagenesis introduced a unique cysteine residue for uniform labeling with a thiol-reactive fluorochrome. After expression in E. coli, the scFv was purified by immobilized metal affinity chromatography (IMAC) using an added C-terminal 6-histidine sequence. The protein was renatured and labeled while immobilized on the IMAC resin. After 0.02-microm filtration to remove microaggregates, the resulting reagent was highly uniform and stable at -12 degrees C for at least 1 year. Three formats of APCE using the scFv reagent were explored. A "mix-and-inject" assay optimized for low detection limits demonstrated analysis of 10 pM digoxin in aqueous standard solutions in 10 min. A rapid mix-and-inject format in a short capillary allowed detection of 1 nM digoxin in 1 min. Digoxin samples in serum and urine were injected directly after 10-fold dilution. In combination with solid-phase extraction, 400 fM digoxin was detected in 1 mL of serum. Including solid-phase extraction, reproducibility was within 2.5%, and the linear range was 3 orders of magnitude. The strategy adopted in this paper should be of general use in the low-level analysis of small analytes.

This work demonstrates the use of affinity probe capillary electrophoresis (APCE) in the quantitative analysis of drugs in biological fluids at the low pM level. The interaction of human carbonic anhydrase II (HCAII) with the glaucoma drug dorzolamide (Dz) was chosen as a model system. HCAII was labeled at its single cysteine residue using a thiol-specific fluorescein reagent. The peak area of HCAII complexed with the tight-binding drug Dz provided a direct assay of the drug concentration in solution. A charged competitive ligand added to the running buffer was employed in APCE to distinguish Dz-bound from free forms of the HCAII. Using laser-induced fluorescence (LIF), the Dz detection limit was 16.5 pM in aqueous solution and 62.5 pM in both urine and plasma. Normalized peak area reproducibility of the drug was within 3.4% RSD. Each analysis was completed within 10 min, including incubation, and consumed only 0.3 pmol of labeled protein. The APCE approach provides an effective method for trace level detection of drugs in biological matrices.

Staphylococcal nuclease is found in two folded conformations that differ in the isomerization of the Lys 116-Pro 117 peptide bond, resulting in two different conformations of the residue 112-117 loop. The cis form is favored over the trans with an occupancy of 90%. Previous mutagenesis studies have shown that when Lys 116 is replaced by glycine, a trans conformation is stabilized relative to the cis conformation by the release of steric strain in the trans form. However, when Lys 116 is replaced with alanine, the resulting variant protein is identical to the wild-type protein in its structure and in the dominance of the cis configuration. The results of these studies suggested that any nuclease variant with a non-glycine residue at position 116 should also favor the cis form because of steric requirements of the beta-carbon at this position. In this report, we present a structural analysis of four nuclease variants with substitutions at position 116. Two variants, K116E and K116M, follow the ''beta-carbon'' hypothesis by favoring the cis form. Furthermore, the crystal structure of K116E is nearly identical to that of the wild-type protein. Two additional variants, K116D and K116N, provide exceptions to this simple ''beta-carbon'' rule in that the trans conformation is stabilized relative to the cis configuration by these substitutions. Crystallographic data indicate that this stabilization is effected through the addition of tertiary interactions between the side chain of position 116 with the surrounding protein and water structure. The detailed trans conformation of the K116D variant appears to be similar to the trans conformation observed in the K116G variant, suggesting that these two mutations stabilize the same conformation but through different mechanisms.

We examine the role of the conformational restriction imposed by constrained ends of a protein loop on the determination of a strained loop conformation. The Lys 116-Pro 117 peptide bond of staphylococcal nuclease A exists in equilibrium between the cis and trans isomers. The folded protein favors the strained cis isomer with an occupancy of 90%. This peptide bond is contained in a solvent-exposed, flexible loop of residues 112-117 whose ends are anchored by Val 111 and Asn 118. Asn 118 is constrained by 2 side-chain hydrogen bonds. We investigate the importance of this constraint by replacing Asn 118 with aspartate, alanine, and glycine. We found that removing 1 or more of the hydrogen bonds observed in Asn 118 stabilizes the trans configuration over the cis configuration. By protonating the Asp 118 side chain of N118D through decreased pH, the hydrogen bonding character of Asp 118 approached that of Asn 118 in nuclease A, and the cis configuration was stabilized relative to the trans configuration. These data suggest that the rigid anchoring of the loop end is important in establishing the strained cis conformation. The segment of residues 112-117 in nuclease A provides a promising model system for study of the basic principles that determine polypeptide conformations. Such studies could be useful in the rational design or redesign of protein molecules.

Protein molecules generally adopt a tertiary structure in which all backbone and side chain conformations are arranged in local energy minima; however, in several well‐refined protein structures examples of locally strained geometries, such as cis peptide bonds, have been observed. Staphylococcal nuclease A contains a single cis peptide bond between residues Lys 116 and Pro 117 within a type VIaβ‐turn. Alternative native folded forms of nuclease A have been detected by NMR spectroscopy and attributed to a mixture of cis and trans isomers at the Lys 116‐Pro 117 peptide bond. Analyses of nuclease variants K116G and K116A by NMR spectroscopy and X‐ray crystallography are reported herein. The structure of K116A is indistinguishable from that of nuclease A, including a cis 116–117 peptide bond (92% populated in solution). The overall fold of K116G is also indistinguishable from nuclease A except in the region of the substitution (residues 112–117), which contains a predominantly trans Gly 116–Pro 117 peptide bond (80% populated in solution). Both Lys and Ala would be prohibited from adopting the backbone conformation of Gly 116 due to steric clashes between the β‐carbon and the surrounding residues. One explanation for these results is that the position of the ends of the residue 112–117 loop only allow trans conformations where the local backbone interactions associated with the ϕ and Ψ torsion angles are strained. When the 116–117 peptide bond is cis, less strained backbone conformations are available. Thus the relaxation of the backbone strain intrinsic to the trans conformation compensates for the energetically unfavorable cis X‐Pro peptide bond. With the removal of the side chain from residue 116 (K116G), the backbone strain of the trans conformation is reduced to the point that the conformation associated with the cis peptide bond is no longer favorable.

Thermally unfolded staphylococcal nuclease has been rapidly quenched to temperatures near 0-degrees-C and the refolding behavior examined using an NMR kinetic experiment. Unfolded protein, exhibiting random coil chemical shifts, persists following the quench and refolds in two distinct kinetic phases. A protein folding intermediate with a trans Lys 116-Pro 117 peptide bond is transiently overpopulated and relaxes to the predominantly cis native cis-trans equilibrium. The rate of trans --> cis isomerization in the nativelike nuclease intermediate is approximately 100-fold faster than that observed in a Lys-Pro model peptide. The activation enthalpy of 20 kcal/mol observed for the nuclease Lys 116-Pro 117 peptide bond is comparable to that observed for other X-Pro isomerizations.

We report steady-state and time-resolved fluorescence studies with the single tryptophan protein, Staphylococcus aureus A, and several of its site-directed mutants. A couple of these mutants, nuclease-conA and nuclease-conA-S28G (which are hybrid proteins containing a six amino acid beta-turn substitute from concanavalin A), are found to have a much lower thermodynamic stability than the wild type. The thermal transition temperatures for nuclease-conA and S28G are 32.8 and 30.5-degrees-C, which are about 20-degrees-C lower than the T(m) for wild-type nuclease A. These mutant proteins also are denatured by a much lower concentration of the denaturants urea and guanidine hydrochloride. We also show that an unfolding transition in the structure of the nuclease-conA hybrids can be induced by relatively low hydrostatic pressure (approximately 700 bar). The free energy for unfolding of nuclease-conA (and nuclease-conA-S28G) is found to be only 1.4 kcal/mol (and 1.2 kcal/mol) by thermal, urea, guanidine hydrochloride, and pressure unfolding. Time-resolved fluorescence intensity and anisotropy measurements with nuclease-conA-S28G show the temperature-, urea-, and pressure-perturbed states each to have a reduced average intensity decay time and to depolarize with a rotational correlation time of approximately 1.0 ns (as compared to a rotational correlation time of 11 ns for the native form of nuclease-conA-S28G at 20-degrees-C).

Cold denaturation is now recognized as a general property of proteins but has been observed only under destabilizing conditions, such as moderate denaturant concentration or low pH. By destabilizing the protein using site-directed mutagenesis, we have observed cold denaturation at pH 7.0 in the absence of denaturants in a mutant of staphylococcal nuclease, which we call NCA S28G for a hybrid protein between staphylococcal nuclease and concanavalin A in which there is the point mutation Ser-28----Gly. The temperature of maximum stability (tmax) as determined by circular dichroism (CD) was 18.1 degrees C, and the midpoints of the thermal unfolding transitions (tm) were 0.6 degrees C and 30.0 degrees C. These values may be compared with the tm of 52.5 degrees C for wild-type staphylococcal nuclease, for which no cold denaturation was observed under these conditions. When the stability of the mutant was examined in 2H2O by NMR, CD, or fluorescence, a substantial increase in the amount of folded protein at the tmax was noted as well as a decrease in tmax, reflecting increased stability.

The equilibrium between alternative folded states of a globular protein, staphylococcal nuclease, has been investigated by using 1H NMR. Magnetization-transfer experiments have revealed the existence of a related structural heterogeneity of the unfolded state, and quantitative analysis of a series of these experiments has permitted the kinetics of folding and interconversion of the different states to be explored. A model based on cis/trans isomerism at the peptide bond preceding Pro-117 has been developed to account for the results. This model, recently supported by a protein-engineering experiment [Evans et al. (1987) Nature (London) 329, 266], has been used to interpret the kinetic data, providing insight into the nature of the folding processes. The predominance of the cis-proline form in the folded state is shown to derive from a large favorable enthalpy term resulting from more effective overall folding interactions. The kinetics of folding and isomerization are shown to occur on similar time scales, such that more than one pathway between two states may be significant. It has been possible, however, to compare the direct folding and unfolding rates within the cis- and trans-proline-containing populations, with results suggesting that the specific stabilization of the cis peptide bond is effective only at a late stage in the folding process.

Using frequency domain methods, the fluorescence decay of Trp-140 in staphylococcal nuclease and its site-directed mutant (Pro-117----Gly) has been examined. Based on nuclear magnetic resonance (NMR) studies (Evans, P. A., C. M. Dobson, R. A. Kautz, G. Hatfull, and R. O. Fox. 1987. Nature [Lond.]. 329:266-268), it is believed that nuclease exists in two macroscopic, native conformations and that the slow interconversion of these conformations is controlled by the cis----trans isomerization of Pro-117. The above mutant shows only one native conformation in NMR experiments. To test the hypothesis that the biexponential fluorescence decay of Trp-140 of nuclease can also be related to the existence of these conformational states of the protein, we have compared the decay patterns of the wild type and mutant. Essentially no difference was observed, which indicates that there is some other basis for the nonexponential decay of Trp-140. We have used global nonlinear least squares analysis to link the fit of data at several temperatures.

Four-residue beta-turns and larger loop structures represent a significant fraction of globular protein surfaces and play an important role in determining the conformation and specificity of enzyme active sites and antibody-combining sites. Turns are an attractive starting point to develop protein design methods, as they involve a small number of consecutive residues, adopt a limited number of defined conformations and are minimally constrained by packing interactions with the remainder of the protein. The ability to substitute one beta-turn geometry for another will extend protein engineering beyond the redecoration of fixed backbone conformations to include local restructuring and the repositioning of surface side chains. To determine the feasibility and to examine the effect of such a structural modification on the fold and thermodynamic stability of a globular protein, we have substituted a five-residue turn sequence from concanavalin A for a type I' beta-turn in staphylococcal nuclease. The resulting hybrid protein is folded and has full nuclease enzymatic activity but reduced thermodynamic stability. The crystal structure of the hybrid protein reveals that the guest turn sequence retains the conformation of the parent concanavalin A structure when substituted in the nuclease host.

Nuclear magnetic resonance (NMR) studies have shown that two distinct folded conformations of staphylococcal nuclease coexist in solution and that these two states can interconvert directly without passing through an unfolded state. These experiments have also revealed that the two forms have very different folding kinetics, although the possibility that one component is an obligatory intermediate for the folding of the other form could be discounted. Here we report NMR data which show that alternative unfolded states are also distinguishable. These observations led us to hypothesize that cis/trans isomerism at a single peptide bond between a proline and its preceding residue might be the origin of the conformational multiplicity. Proline 117 was identified as a likely candidate for the site concerned and a mutant protein, in which Pro 117 was replaced by Gly, was constructed in order to test this. Alternative conformations are not observed in the spectrum of this mutant, lending powerful support to this hypothesis.