This study proposes a Capillary IsoElectric Focusing Analytical Procedure Platform for the charge heterogeneity characterization of monoclonal antibodies. The Analytical Quality by Design approach was implemented to define a robust Method Operable Design Region using Infliximab as the primary model compound. The Analytical Target Profile consisted in a robust Analytical Procedure Platform able to measure the monoclonal antibody isoforms pI values with a bias lower than 4%. Risk Management tools were used to evaluate and control the risk of Analytical Target Profile failure. Risk Analysis identified several potential Critical Procedure Parameters, including urea and methyl cellulose concentrations, cathodic/anodic stabilizer levels, carrier ampholytes composition. The carrier ampholytes composition was optimized utilizing a mixture design. A Scheffé mixture model allowed the selection of experiments, and the Partial Least Squares regression provided high predictive power models for the three defined responses, i.e. the calibration biases at the bracketing markers of Infliximab (pI 9.5 and pI 7.0) and the overall fit of the pI vs. migration time relationship. Within the Method Operable Design Region, the optimized conditions were achieved using as the specific carrier ampholyte a blend constituted of 1.5% at pH 3-10, 1.5% at pH 5-8, and 2.0% at pH 8-10.5. The validation results demonstrated the robustness of the Analytical Procedure Platform, with a bias in pI measurement lower than 0.3% for the markers bracketing the Infliximab isoforms. In addition, the method was validated for linearity, trueness and precision as degree of repeatability in the quantification of the charge variants of Infliximab. Under the same optimized experimental conditions, the method was applied to successfully profile Bevacizumab, Daratumumab, Trastuzumab and Durvalumab. By including molecules exhibiting a broader range of physicochemical properties compared to the Infliximab model, the study confirms the versatility of the proposed Capillary IsoElectric Focusing method for moderately basic to basic antibodies. This work provides a refined, regulatory-compliant conventional electrokinetic methodology for biopharmaceutical quality control.

A microfluidic paper-based analytical device (μPAD) was developed for the quantitation of ferrous ions (Fe2+) and total iron in iron sucrose administered in iron deficiency anemia. The elemental iron content is 20 mg/mL and USP established a limit of Fe2+ as 0.4 % (w/v). The μPAD allowed the quantitation of Fe2+ by complexation with 1,10-phenanthroline, forming an orange-red complex analysed by imageJ®. For total iron determination, ferric ion (Fe3+) was reduced to Fe2+ using ascorbic acid prior to complexation. The device was prepared on chromatographic paper by using the wax printing method. The dimensions of channels and detection zones as well as reagents/sample volumes were optimized using an Analytical Quality by Design (AQbD) approach, focusing on two critical analytical procedure attributes: mean intensity of the colour developed in the detection zones and homogeneity of the colour. By implementing the AQbD, the Method Operable Design Region was defined to account for model uncertainty and experimental variability. The optimized method was linear over 0.10-0.50 mM for Fe2+ and 2.0-8.0 mM for total iron, with limits of quantitation of 0.10 and 1.60 mM, respectively. Method performance was evaluated for selectivity, range, sensitivity, trueness, and robustness. Application to commercially available iron sucrose injections showed the accurate quantitation of Fe2+ impurities, with results statistically comparable to a validated capillary electrophoresis method. The developed μPAD is a low-cost, portable, and reliable platform for iron determination in pharmaceutical samples, suited to resource-limited settings.

The evaluation of monoclonal antibodies (mAbs) charge variants during their entire life cycle is crucial, as their profiles represent a critical quality attribute of biotherapeutics. While the current scenario still shows marked analytical non-uniformity in the evaluation of charge variants with imaged capillary isoelectric focusing (icIEF) with many "product-specific" methods, regulatory authorities are increasingly encouraging the utilization of horizontal standards, such as Platform Analytical Procedures (PAPs). A practical Analytical Quality by Design (AQbD) workflow is provided, emphasizing the Design of Experiments as a Quality Risk Management tool to develop a PAP based on icIEF, able to accurately measure charge variants pI values. Infliximab was chosen as the leading molecule. The cause-effect matrix, combined with an asymmetric screening design, identified key parameters exerting a critical impact on the Analytical Procedure Attributes. PAP quality measurements were ensured by a 10% risk acceptance level, employing response surface methodology and Monte Carlo simulation. The developed PAP was validated using three independent System Suitability samples and exhibited a low bias in the pI measurement (less than 2%), while maintaining satisfactory separation performance. Good intra-day and inter-day repeatability, combined with a robustness test and an exploratory application to real samples of three different therapeutic mAbs, confirmed its versatility. The study supports regulatory trends by demonstrating the successful application of AQbD in PAP development. This icIEF platform would ensure a systematically consistent analysis of charge variants, where pI is promoted to an objective tool, to be used as an additional reliable parameter in the Quality Control context.

The stability of collagen, the most abundant protein in humans and many animals, is related to the hydroxylation of L-proline, a post-translational modification occurring at carbon 3 and 4 on its pyrrolidine ring. Collagens of different origins have shown different proline hydroxylation levels, making hydroxyprolines useful biomarkers in structure characterizations. The presence of two chiral carbon atoms, 3-hydroxyproline and 4-hydroxyproline, results in eight stereoisomers (four pairs of enantiomers) whose quantitation in collagen hydrolysates requires enantioselective analytical methods. Capillary electrophoresis was applied for the separation and quantitation of the eight stereoisomers of 3- and 4-hydroxyproline and D,L-proline in collagen hydrolysates. The developed method is based on the derivatization with the chiral reagent (R)-(-)-4-(3-Isothiocyanatopyrrolidin-yl)-7-nitro-2,1,3-benzoxadiazole, enabling the use of a light-emitting diode-induced fluorescence detector for high sensitivity. The separation of the considered compounds was accomplished in less than 10 min, using a 500 mM acetate buffer pH 3.5 supplemented with 5 mM of heptakis(2,6-di-O-methyl)-β-cyclodextrin as the chiral selector. The method was fully validated and showed the adequate sensitivity for the application to samples of collagen hydrolysates. The analysis of samples extracted from chicken Pectoralis major muscles affected by growth-related myopathies showed different stereoisomer patterns compared to those from the unaffected control samples.

In the present study the compositional analysis of the amino acids released by the acidic hydrolysis of the vaccine antigens was approached as an alternative to the dye-binding methods, for improvement of the quality control. In particular, the Analytical Quality by Design principles were undertaken in optimizing the hydrolysis conditions of the antigens to be applied prior to the quantitation by UHPLC-UV. Bexsero was used as a case study; it is a recombinant meningococcal B vaccine and one of its critical quality attributes is the content of the three core protein antigens, namely Neisseria Heparin Binding Antigen, factor H binding protein and Neisseria adhesin A, in the final formulation. Conventionally, the proteins quantitation is carried out by dye-binding assays. Analytical Target Profile was defined as the accurate determination of amounts of the Bexsero antigens. The Critical Method Parameters were chosen by means of the cause-effect matrix. A Face Centered Design was used to select the experiments to investigate the process and finally a Method Operable Design Region with a risk of failure of 5% was defined. The selected working point for routine use was: hydrolysis time, 17 hrs; temperature, 112 C-degrees; 6 M HCl volume, 300 mu l; antioxidant 90% phenol volume, 5 mu l.

Background: Three herbal extracts (Asparagus racemosus Willd., Tabebuia avellanedae Lorentz, and Glycyrrhiza glabra L.) were mixed with three essential oils (Foeniculum vulgare Mill., Mentha piperita L., and Pimpinella anisum L.) to formulate a product (HEMEO) whose active compounds include saponins and steroids in Asparagus racemosus, known for their anti-inflammatory properties; glycyrrhizin and flavonoids in Glycyrrhiza glabra, which exhibit gastroprotective and antispasmodic effects; menthol in Mentha piperita, contributing with antispasmodic and antimicrobial properties; and anethole and polyphenols in Pimpinella anisum, which modulate intestinal motility and offer antimicrobial activity. Objective: HEMEO was formulated for applications in intestinal motility disorders. Methods: HEMEO was evaluated for spontaneous and induced motility effects in isolated guinea pig ileum, colon, and stomach. Ex vivo experiments were conducted using LabChart software v7.0, and the product’s antibacterial action against Helicobacter pylori and its antioxidant effects were assessed through disc diffusion and FRAP assays. The presence of the volatile compounds in the formulation was confirmed by GC-MS analysis; the TPC of HEMEO, determined using the Folin–Ciocalteu method, was 9.925 ± 0.42 mg GAE/g. Conclusions: HEMEO showed a phenolic content correlated with its antioxidant potential and in addition inhibited H. pylori growth and demonstrated notable antioxidant properties, suggesting its role as a supportive agent in digestive processes and in managing motility disorders.

During collagen biosynthesis, proline is post-translationally converted to hydroxyproline by specific enzymes. This amino acid, unique to collagen, plays a crucial role in stabilizing the collagen triple helix structure and could serve as an important biomarker for collagen content and quality analysis. Hydroxyproline has four isomers, depending on whether proline is hydroxylated at position 4 or 3 and on whether the cis- or trans- conformation is formed. Moreover, as extensive hydrolysis of collagen is required for its amino acid analysis, epimerization may also occur, although to a lesser extent, giving a total of eight possible isomers.The aim of the present study was to develop a reversed-phase high-performance liquid chromatography-UV-mass spectrometry (RPLC-UV-MS) method for the separation and quantification of all eight hydroxyproline isomers. After the chiral derivatization of the hydroxyproline isomers with Nα-(2,4-dinitro-5-fluorophenyl)-L-valinamide (L-FDVA), to enable their UV detection, the derivatized diastereoisomers were separated by testing different C18 column technologies and morphologies and optimizing operative conditions such as the mobile phase composition (solvent, additives), elution mode, flow rate and temperature. Baseline resolution of all eight isomers was achieved on a HALO® ES-C18 reversed-phase column (150×1.5 mm, 2.7 μm, 160 Å) using isocratic elution and MS-compatible mobile phase.The optimized method was validated for the quantification of hydroxyproline isomers and then applied to different collagen hydrolysates to gain insight and a deeper understanding of hydroxyproline abundances in different species (human, chicken) and sources (native, recombinant).

Omeprazole (OME) is a proton pump inhibitor used to treat gastroesophageal reflux disease associated conditions. The current study presents an Analytical Quality by Design-based approach for the development of a CE method for OME impurity profiling. The scouting experiments suggested the selection of solvent modified Micellar ElectroKinetic Chromatography operative mode using a pseudostationary phase composed of sodium dodecyl sulfate (SDS) micelles and n-butanol as organic modifier in borate buffer. A symmetric three-level screening matrix 37//16 was used to evaluate the effect of Critical Method Parameters, including Background Electrolyte composition and instrumental settings, on Critical Method Attributes (critical resolution values, OME peak width and analysis time). The analytical procedure was optimized using Response Surface Methodology through a Central Composite Orthogonal Design. Risk of failure maps made it possible to define the Method Operable Design Region, within which the following optimized conditions were selected: 72mM borate buffer pH 10.0, 96mM SDS, 1.45%v/v n-butanol, capillary temperature 21 °C, applied voltage 25kV. The method was validated according to ICH guidelines and robustness was evaluated using a Plackett-Burman design. The developed procedure enables the simultaneous determination of OME and seven related impurities, and has been successfully applied to the analysis of pharmaceutical formulations.

The understanding of the use of Magnolia officinalis L. (Magnoliaceae) as a possible dietary supplement for supporting the treatment of airway pathologies might be of clinical interest. Two commercially available bark extracts (M. officinalis extract [MOE]) were characterized by quantitation in honokiol and magnolol content by means of high-performance liquid chromatography with UV detection. MOE effects, as well as those of the reference compounds per se, on some targets connected to airway pathologies (antibacterial- and lung and trachea relaxing- activities) were investigated. Results showed that MOE possessed interesting antibacterial activity against Staphylococcus aureus, Pseudomonas aeruginosa, and Streptococcus pneumoniae. This was accompanied by a spasmolytic and antispasmodic activity, possibly owing to its ability to concurrently modulate different targets such as H1 -, β2 - and muscarinic receptors and l-type calcium channels involved in bronchodilation. All these effects were directly related to the MOE content in honokiol and magnolol. In conclusion, the properties of MOE highlighted here strongly encourage its application as dietary supplement in the treatment of airway diseases.

The release of hazardous chemicals into aquatic environments has long been a known problem, but its full impact has only recently been realized. This study presents a validated liquid chromatography-mass spectrometry (HPLC-MS/MS) method for detecting pharmaceutical and pesticide residues in mussels (Mytilus galloprovincialis). An innovative MS-compatible extraction method was developed and validated, demonstrating successful recovery rates for analytes at three different concentration levels (25-95%). The method detected the target analytes at ng/g concentrations with high accuracy (-7% to 11%) and low relative standard deviation (<10%) for both intra-day and inter-day analyses. After validation, the method was applied to mussel samples collected from a commercial farm near Senigallia, Adriatic Sea, detecting different contaminants in the range of 2-40 ng/g (dry weight). The study provides a valuable tool for investigating the potential threats posed by diverse contaminant classes with high annual tonnage, including analytes with known persistence and/or illegal status.

In 2022, the International Council for Harmonisation released draft guidelines Q2(R2) and Q14, intending to specify the development and validation activities that should be carried out during the lifespan of an analytical technique addressed to assess the quality of medicinal products. In the present study, these recommendations were implemented in Capillary Electrophoresis method development for the quality control of a drug product containing trimecaine, by applying Analytical Quality by Design. According to the Analytical Target Profile, the procedure should be able to simultaneously quantify trimecaine and its four impurities, with specified analytical performances. The selected operative mode was Micellar ElectroKinetic Chromatography employing sodium dodecyl sulfate micelles supplemented with dimethyl-β-cyclodextrin, in a phosphate-borate buffer. The Knowledge Space was investigated through a screening matrix encompassing the composition of the background electrolyte and the instrumental settings. The Critical Method Attributes were identified as analysis time, efficiency, and critical resolution values. Response Surface Methodology and Monte Carlo Simulations allowed the definition of the Method Operable Design Region: 21–26 mM phosphate-borate buffer pH 9.50–9.77; 65.0 mM sodium dodecyl sulfate; 0.25–1.29% v/v n-butanol; 21–26 mM dimethyl-β-cyclodextrin; temperature, 22 °C; voltage, 23–29 kV. The method was validated and applied to ampoules drug products.

The main reasons for performing derivatization in capillary electrophoresis are largely the same as for liquid chromatography, however there are specific aspects in electrokinetic separations where derivatization plays specific roles. The review is focused on the articles published in the past 5 years with the aim to highlight this unicity. Derivatization is mainly applied to improve the inherent low sensitivity of capillary electrophoresis when optical detection is used and the introduction of originally developed derivatization approaches have been addressed mainly to the detection by laser-induced fluorescence. A further peculiarity concerns the development of automatized as well as in-capillary derivatization that can be performed using the commercially available instrumentation. The majority of the methods considered deal with the derivatization of amine group in small molecules (in particular, amino acids) as well as in proteins and peptides. Applications are also addressed to chiral analysis and for trapping unstable and reactive small molecules and inorganic ions. The analysis of proteins and saccharides in glycomics, have been covered in dedicated sections.

Bile acids (BAs), endogenous acidic steroids synthetized from cholesterol in the liver, play a key role in the gut–liver axis physiopathology, including in hepatotoxicity, intestinal inflammatory processes, and cholesterol homeostasis. Faecal Oxo-BAs, relatively stable intermediates of oxidation/epimerization reactions of the BA hydroxyls, could be relevant to investigating the crosstalk in the liver–gut axis and the relationship between diseases and alterations in microbiota composition. A paucity of information currently exists on faecal BA profiles in dogs with and without chronic inflammatory enteropathy (CIE). Comprehensive assessment of 31 molecules among faecal BAs and related microbiota metabolites was conducted with high-performance liquid chromatography tandem mass spectrometry (HPLC-MS/MS). Odds ratios (ORs) for associations of BAs with CIE were estimated using logistic regression. Principal component analysis was performed to find differences between the control and pathological dogs. Higher levels of primary BAs and muricholic acids, and lower levels of secondary BAs were found in pathological dogs. Higher concentrations in faecal oxo-metabolites were associated with the absence of CIE (OR < 1). This study shows a marked difference in faecal BA profiles between dogs with and without CIE. Further research will be needed to better understand the role of oxo-BAs and muricholic acids in CIE dogs.

Amino acids are ubiquitous components of mammalian milk and greatly contribute to its nutritional value. The compositional analysis of free amino acids is poorly reported in the literature even though their determination in the biological fluids of livestock animals is necessary to establish possible nutritional interventions. In the present study, the free amino acid profiles in mature swine milk, colostrum and plasma were assessed using a targeted metabolomics approach. In particular, 20 amino acids were identified and quantified via two alternative and complementary reversed-phase HPLC methods, involving two stationary phases based on core-shell technology, i.e., Kinetex C18 and Kinetex F5, and two detection systems, i.e., a diode array detector (DAD) and a fluorescence detector (FLD). The sample preparation involved a de-proteinization step, followed by pre-chromatographic derivatization with 9-fluorenylmethylchloroformate (FMOC-Cl). The two optimized methods were validated for specificity, linearity, sensitivity, matrix effect, accuracy and precision and the analytical performances were compared. The analytical methods proved to be suitable for free amino acid profiling in different matrices with high sensitivity and specificity. The correlations among amino acid levels in different biological fluids can be useful for the evaluation of physio-pathological status and to monitor the effects of therapeutic or nutritional interventions in humans and animals.

This study investigates the effects of glyphosate (GLY) and its metabolite AMPA on cytoprotective and detoxification mechanisms in haemocytes of Mytilus galloprovincialis. Cells were treated in vitro with 0.1 and 1.0 µg/L GLY, 0.1 µg/L, 0.1 and 1.0 µg/L AMPA, or two mixtures GLY+AMPA (0.1 µg/L GLY + 0.1 µg/L AMPA, 1.0 µg/L GLY + 1.0 µg/L AMPA). GLY and AMPA increased MXR efflux activity and modulated expression of the ABCB transcript encoding a MXR related ABC transporter P-glycoprotein. The mixtures GLY+AMPA reduced efflux activity with ABCB down-regulation (at 1 µg/L GLY/AMPA). Modulation of lysosomal and immune related transcripts generally agree with known effects of the chemicals on these physiological functions. Given their cumulative action as chemosensitizers of the MXR system, and their interactive effects on haemocyte parameters, glyphosate and AMPA at environmental concentrations should be addressed as a concern factor for the biological vulnerability of marine habitats.

Capillary electrophoresis (CE) is a potent method for analyzing chiral substances and is commonly used in the enantioseparation and chiral purity control of pharmaceuticals from different matrices. The adoption of Quality by Design (QbD) concepts in analytical method development, optimization and validation is a widespread trend observed in various analytical approaches including chiral CE. The application of Analytical QbD (AQbD) leads to the development of analytical methods based on sound science combined with risk management, and to a well understood process clarifying the influence of method parameters on the analytical output. The Design of Experiments (DoE) method employing chemometric tools is an essential part of QbD-based method development, allowing for the simultaneous evaluation of experimental parameters as well as their interaction. In 2022 the International Council for Harmonization (ICH) released two draft guidelines (ICH Q14 and ICH Q2(R2)) that are intended to encourage more robust analytical procedures. The ICH Q14 guideline intends to harmonize the scientific approaches for analytical procedures’ development, while the Q2(R2) document covers the validation principles for the use of analytical procedures including the recent applications that require multivariate statistical analyses. The aim of this review is to provide an overview of the new prospects for chiral CE method development applied for the enantiomeric purity control of pharmaceuticals using AQbD principles. The review also provides an overview of recent research (2012–2022) on the applicability of CE methods in chiral drug impurity profiling.

Quality by Design was adopted for developing an effective extraction procedure of (poly)phenolic compounds from bilberry (Vaccinium myrtillus L.) fruits, using a pooled sample of berries from different regions of Ukraine. Mechanical solvent extraction, microwave-assisted extraction (MAE) and ultrasonic-assisted extraction (UAE) were investigated by screening matrices. Extraction time (Time, from 5 to 15 min), organic solvent type (OS type, methanol, ethanol and acetone), organic solvent percentage (OS%, from 50% to 90%), sample/extractant ratio (S/E ratio, from 0.025 to 0.1 g mL(-1)), and, only for MAE, extraction temperature (T, from 30 to 60 degrees C), were selected as critical method parameters (CMPs). The spectrophotometric assays total soluble polyphenols (TSP), total monomeric anthocyanins (TMA), and radical scavenging activity (evaluated by the 2,2-diphenyl-1-picrylhydrazyl radical (DPPH), the 2,2'-azino-di-(3-ethylbenzthiazoline sulfonic acid), and the ferric reducing antioxidant power methods) were chosen as critical method attributes (CMAs). The screening procedure allowed for selecting UAE and methanol, while the other CMPs underwent further optimization through Response Surface Methodology. Target values for TSP, TMA and DPPH were selected and the method operable design region (MODR) was defined by means of Monte-Carlo simulations. The optimized conditions, with the corresponding MODR intervals in bracket, were the following: (i) Time, 17 min (15-23 min); OS%, 56% (44-59%); S/E ratio, 0.030 (0.022-0.034) g mL(-1). Under these experimental conditions, CMAs values of the pooled sample were the following (n = 3): TSP=4433 +/- 176 mg (+)-catechin eq/100 g dry weight (d.w.); TMA=3575 +/- 194 mg cyanidin-3-glucoside eq/100 g d.w.; DPPH=273 +/- 5 mu g DPPH inhib./mg d.w. The optimized extraction method was tested for matrix effect (ME%) in the UHPLC-MS/MS analysis of 15 anthocyanins and 20 non-anthocyanins individual (poly)phenols commonly found in bilberries, as well as for luteolin, sinapic acid, and pelargonidin-3-glucoside, absent in this fruit and therefore added to the extracts as surrogate standards for evaluating apparent recovery (AR%). vertical bar ME%vertical bar was in any case <= 23% and AR% of the surrogate standards in the range 91-95%, confirming the very good performances of the optimized extraction method. (C) 2022 Elsevier B.V. All rights reserved.

Glyphosate or N-(phosphonomethyl)glycine, widely used as herbicide in agriculture to control weeds and to facilitate harvesting, has been included in Group 2A pollutants (probably carcinogenic to humans) by the International Agency for Research on Cancer (IARC). In intensive agricultural areas, runoff and soil leaching are likely to drive glyphosate to surface waters, where the compound is often detected together with its main microbial metabolite, aminomethylphosphonic acid (AMPA). In the present study a method based on capillary electrophoresis coupled with light-emitting diode-induced fluorescence detection has been developed and validated for the determination of the two compounds in whole soft mass of marine mussels (Mytilus galloprovincialis). The method is based on the acidic hydrolysis of lyophilized tissue using 6 M HCl (oven at 110 °C for 22 h) to release the target analytes; their subsequent derivatization using 4-fluoro-7-nitro-2,1,3-benzoxadiazole, was found to be suitable for the sensitive fluorescence detection. To achieve optimum separation of the analytes from the matrix and degradation reagent interferences, the background electrolyte constituted by borate buffer (pH 9.2, 30 mM) was supplemented with 10 mM heptakis(2,6-di-O-methyl)-β-cyclodextrin. The method was validated for linearity, precision, accuracy, robustness and sensitivity showing LOQ of 0.2 and 1.0 µg/g in fresh tissues, for AMPA and glyphosate, respectively; the recovery values ranged within 88.5 - 94.6% for glyphosate and 70.4 - 76.6% for AMPA. Experimental samples of Mediterranean mussels M. galloprovincialis treated with 100 µg/L or 500 µg/L of both glyphosate and AMPA, showed a dose dependent bioaccumulation of the compounds reaching maximum level of 77.0 µg/g and 11.3 µg/g of AMPA and glyphosate, respectively. The study demonstrates for the first time M. galloprovincialis as potential sentinel organisms for the environmental occurrence of these small amphoteric pollutants.

Chirality is one of the major issues in pharmaceutical research and industry. Capillary electrophoresis (CE) is an interesting alternative to the more frequently used chromatographic techniques in the enantioseparation of pharmaceuticals, and is used for the determination of enantiomeric ratio, enantiomeric purity, and in pharmacokinetic studies. Traditionally, optimization of CE methods is performed using a univariate one factor at a time (OFAT) approach; however, this strategy does not allow for the evaluation of interactions between experimental factors, which may result in ineffective method development and optimization. In the last two decades, Design of Experiments (DoE) has been frequently employed to better understand the multidimensional effects and interactions of the input factors on the output responses of analytical CE methods. DoE can be divided into two types: screening and optimization designs. Furthermore, using Quality by Design (QbD) methodology to develop CE-based enantioselective techniques is becoming increasingly popular. The review presents the current use of DoE methodologies in CE-based enantioresolution method development and provides an overview of DoE applications in the optimization and validation of CE enantioselective procedures in the last 25 years. Moreover, a critical perspective on how different DoE strategies can aid in the optimization of enantioseparation procedures is presented.

A solvent-modified micellar electrokinetic chromatography method was developed following the Quality by Design approach for the simultaneous determination of sitagliptin (SIT), an oral antihyperglycemic drug, and its main impurities derived from the synthesis process. The separation system was identified in the scouting phase and was made by sodium dodecyl sulphate (SDS) micelles with the addition of n-butanol and methanol. The knowledge space was investigated through an asymmetric screening matrix, taking into consideration eight critical method parameters (CMPs) involving the composition of the background electrolyte in terms of buffer concentration and pH, the concentration of surfactants and organic modifiers, and voltage. The critical method attributes (CMAs) were identified as analysis time and the distance between the tail of the electroosmotic flow system peak and the front edge of impurity I1 (sitagliptin triazole hydrochloride). A Box-Behnken Design was used in response surface methodology for calculating the quadratic models relating the CMPs to the CMAs. From the models it was possible to compute the method operable design region (MODR) through Monte-Carlo simulations. The MODR was identified in the probability maps as the multidimensional zone where the risk of failure to achieve the desired values for the CMAs was lower than 10 %. The experimental conditions corresponding to the working point, with the MODR interval, were the following: background electrolyte, 14 (10−18) mM borate buffer pH 9.20, 100 mM SDS, 13.6 (11.1–16.0) %v/v n-butanol, 6.7 (4.5–8.8) %v/v methanol; voltage and temperature were set to 28 kV and 22 °C, respectively. The developed CE method was validated in accordance with International Council for Harmonisation guidelines and was applied to the analysis of SIT tablets. The routine analysis for the quality control of the pharmaceutical product could be conducted in about 11 min.