Monocular visual odometry (MVO) is foundational to autonomous navigation and robotic localization. However, existing learning-based MVO approaches often struggle with either a lack of interpretable, complementary features or overly complex multi-stage architectures. These limitations inherently restrict their robustness and cross-domain generalization. In this work, we propose MVOFormer, a novel transformer framework for robust monocular visual odometry. Our architecture features a Flow-Semantic Dual Branch Encoder that synergizes dense geometric motion cues with object-centric semantic priors, explicitly distinguishing static structures from dynamic distractors. These representations are then fused by an Iterative Multimodal Decoder, enabling coarse-to-fine pose refinement while dynamically suppressing attention on unreliable regions. Extensive evaluations demonstrate that, without any target-domain fine-tuning, MVOFormer achieves superior zero-shot generalization and robustness, significantly outperforming prior learning-based frame-to-frame methods across diverse benchmarks including TartanAir, KITTI, TUM-RGBD, and ETH3D-SLAM.

In recent years, the increased availability of WiFi in indoor environments has gained interest in the robotics community to utilize WiFi signals for indoor simultaneous localization and mapping algorithms. This paper discusses the challenges of achieving high-accuracy geometric map building using WiFi signals. The paper introduces the concept of inverse k-visibility, developed from the k-visibility algorithm, to identify free space in an unknown environment, used for planning, navigation, and obstacle avoidance. Comprehensive experiments, including those utilizing single and multiple RSSI signals, were conducted in both simulated and real-world environments to demonstrate the robustness of the proposed algorithm. Additionally, a detailed analysis comparing the resulting maps with ground-truth LiDAR-based maps is provided to highlight the algorithm's accuracy and reliability.

The future of agriculture is intertwined with automation. Accurate fruit detection, yield estimation, and harvest time prediction are crucial for efficient supply chain management by optimizing resources and logistic utilization. Computer vision can automate these tasks to reduce labour costs and improve efficiency by training deep learning models on appropriate data to perform knowledge-based tasks. Although fruit detection has been the focus of literature, yield prediction and harvest time estimation remain practical challenges for farmers. This is particularly important for high-value, highly perishable crops, such as raspberries, where contractual obligations require precise harvest timing. This paper addresses this gap by providing a learning-based framework for raspberry maturity detection and harvest time estimation. For this end, a phenology study of raspberry plants from three different cultivars was carried out, and seven development stages were identified based on the BBCH-scale; for the first time, a phenology-based dataset of developing raspberry flowers and fruit was curated and made available publicly, which contains 1,853 high-resolution images and 6,907 manually labelled annotations. A comprehensive benchmark was developed from state-of-the-art object detection models, and finally, a tailored deep learning model capable of real-time inference was established that achieved 92.2

Vision algorithms can be executed directly on the image sensor when implemented on the next-generation sensors known as focal-plane sensor-processor arrays (FPSP)s, where every pixel has a processor. FPSPs greatly improve latency, reducing the problems associated with the bottleneck of data transfer from a vision sensor to a processor. FPSPs accelerate vision-based algorithms such as visual-inertial odometry (VIO). However, VIO frameworks suffer from spatial drift due to the vision-based pose estimation, whilst temporal drift arises from the inertial measurements. FPSPs circumvent the spatial drift by operating at a high frame rate to match the high-frequency output of the inertial measurements. In this paper, we present TCB-VIO, a tightly-coupled 6 degrees-of-freedom VIO by a Multi-State Constraint Kalman Filter (MSCKF), operating at a high frame-rate of 250 FPS and from IMU measurements obtained at 400 Hz. TCB-VIO outperforms state-of-the-art methods: ROVIO, VINS-Mono, and ORB-SLAM3.

Task execution quality significantly impacts multi-robot missions, yet existing task allocation frameworks rarely consider quality of service as a decision variable, despite its importance in applications like robotic disinfection and cleaning. We introduce the multi-robot, multi-objective, and multi-mode routing and scheduling (M3RS) problem, designed for time-constrained missions. In M3RS, each task offers multiple execution modes with varying resource needs, durations, and quality levels, allowing trade-offs across mission objectives. M3RS is modeled as a mixed-integer linear programming (MIP) problem that optimizes task sequencing and execution modes for each agent. We apply M3RS to multi-robot disinfection in healthcare and public spaces, optimizing disinfection quality and task completion rates. Through synthetic case studies, M3RS demonstrates 3%-46% performance improvements over the standard task allocation method across various metrics. Further, to improve compute time, we propose a clustering-based column generation algorithm that achieves solutions comparable to or better than the baseline MIP solver while reducing computation time by 60%. We also conduct case studies with simulated and real robots. Experimental videos are available on the project page (https://sites.google.com/view/g-robot/m3rs/).

With the increasing use of robots in daily life, there is a growing need to provide robust collaboration protocols for robots to tackle more complicated and dynamic problems effectively. This paper presents a novel, factor graph-based approach to address the pursuit-evasion problem, enabling accurate estimation, planning, and tracking of an evader by multiple pursuers working together. It is assumed that there are multiple pursuers and only one evader in this scenario. The proposed method significantly improves the accuracy of evader estimation and tracking, allowing pursuers to capture the evader in the shortest possible time and distance compared to existing techniques. In addition to these primary objectives, the proposed approach effectively minimizes uncertainty while remaining robust, even when communication issues lead to some messages being dropped or lost. Through a series of comprehensive experiments, this paper demonstrates that the proposed algorithm consistently outperforms traditional pursuit-evasion methods across several key performance metrics, such as the time required to capture the evader and the average distance traveled by the pursuers. Additionally, the proposed method is tested in real-world hardware experiments, further validating its effectiveness and applicability.

Collaborative mapping of unknown environments can be done faster and more robustly than a single robot. However, a collaborative approach requires a distributed paradigm to be scalable and deal with communication issues. This work presents a fully distributed algorithm enabling a group of robots to collectively optimize the parameters of a Neural Radiance Field (NeRF). The algorithm involves the communication of each robot's trained NeRF parameters over a mesh network, where each robot trains its NeRF and has access to its own visual data only. Additionally, the relative poses of all robots are jointly optimized alongside the model parameters, enabling mapping with less accurate relative camera poses. We show that multi-robot systems can benefit from differentiable and robust 3D reconstruction optimized from multiple NeRFs. Experiments on real-world and synthetic data demonstrate the efficiency of the proposed algorithm.

This paper presents a comprehensive framework for 6G-enabled cooperative robotics, focusing on decentralized multi-robot Simultaneous Localization and Mapping (SLAM). We propose standardized communication protocols, data formats, and architectural principles to enable seamless real-time collaboration among robotic agents. A feature-based map representation is introduced to facilitate efficient and lightweight data exchange, while 6G network slicing is leveraged to ensure ultra-reliable, low-latency communication for both control and mapping traffic. We implement a decentralized multi-quadrotor SLAM system for feature tracking, validated through 3D simulations in a dynamic environment. Results demonstrate successful collaborative mapping and localization despite sensor noise and intermittent communication. The study highlights the transformative potential of 6G in enabling scalable, reliable, and efficient cooperative robotic systems.

Multirotor Unmanned Aerial Vehicles (UAV)s have recently become an important instrument for collecting mineral data, enabling more effective and accurate geological investigations. This paper explores the difficulties in mounting high-sensitivity sensors on a UAV platform, including electromagnetic interference, payload dynamics, and maintaining stable sensor performance while in flight. It is highlighted how the specific solutions provided to deal with these problems have the potential to alter the collection of mineral data assisted by UAVs. The work also shows experimental findings that demonstrate the creative potential of these solutions in UAV-based mineral data collecting, leading to improvements in effective mineral exploration through careful design, testing, and assessment of these systems. These innovations resulted in a platform that is quickly deployable in remote areas and able to operate more efficiently compared to traditional multirotor UAVs while still producing equal or higher quality mineral data. This allows for much higher efficiency and lower operating costs for high-production UAV-based mineral data acquisition.

This paper introduces a novel k-cell decomposition method for pursuit-evasion problems in polygonal environments, where a searcher is equipped with a k-modem: a device capable of seeing through up to k walls. The proposed decomposition ensures that as the searcher moves within a cell, the structure of unseen regions (shadows) remains unchanged, thereby preventing any geometric events between or on invisible regions, that is, preventing the appearance, disappearance, merge, or split of shadow regions. The method extends existing work on 0- and 2-visibility by incorporating m-visibility polygons for all even 0 ≤ m ≤ k, constructing partition lines that enable robust environment division. The correctness of the decomposition is proved via three theorems. The decomposition enables reliable path planning for intruder detection in simulated environments and opens new avenues for visibility-based robotic surveillance. The difficulty in constructing the cells of the decomposition consists in computing the k-visibility polygon from each vertex and finding the intersection points of the partition lines to create the cells.

We show that a distributed network of robots or other devices which make measurements of each other can collaborate to globally localize via efficient ad hoc peer-to-peer communication. Our Robot Web solution is based on Gaussian belief propagation (GBP) on the fundamental nonlinear factor graph describing the probabilistic structure of all of the observations robots make internally or of each other, and is flexible for any type of robot, motion or sensor. We define a simple and efficient communication protocol which can be implemented by the publishing and reading of web pages or other asynchronous communication technologies. We show in simulations with up to 1000 robots interacting in arbitrary patterns that our solution convergently achieves global accuracy as accurate as a centralized nonlinear factor graph solver while operating with high distributed efficiency of computation and communication. Via the use of robust factors in GBP, our method is tolerant to a high percentage of faulty sensor measurements or dropped communication packets. Furthermore, we showcase that the system operates on real robots with limited onboard computational resources.

Focal-Plane Sensor-Processor Arrays (FPSP)s are an emerging technology that can execute vision algorithms directly on the image sensor. Unlike conventional cameras, FPSPs perform computation on the image plane – at individual pixels – enabling high frame rate image processing while consuming low power, making them ideal for mobile robotics. FPSPs, such as the SCAMP-5, use parallel processing and are based on the Single Instruction Multiple Data (SIMD) paradigm. In this paper, we present BIT-VIO, the first Visual Inertial Odometry (VIO) which utilises SCAMP-5. BIT-VIO is a loosely-coupled iterated Extended Kalman Filter (iEKF) which fuses together the visual odometry running fast at 300 FPS with predictions from 400 Hz IMU measurements to provide accurate and smooth trajectories.

In this paper, the focus is on improving the efficiency and precision of mineral data collection using UAVs by addressing key challenges associated with sensor integration. These challenges include mitigating electromagnetic interference, reducing vibration noise, and ensuring consistent sensor performance during flight. The paper demonstrates how innovative approaches to these issues can significantly transform UAV-assisted mineral data collection. Through meticulous design, testing, and evaluation, the study presents experimental evidence of the efficacy of these methods in collecting mineral data via UAVs. The advancements achieved in this research enable the UAV platform to remain airborne up to 6$\times$ longer than standard battery-powered multirotors, while still gathering high-quality mineral data. This leads to increased operational efficiency and reduced costs in UAV-based mineral data-gathering processes

Station-keeping tasks for high-altitude balloons show promise in areas such as ecological surveys, atmospheric analysis, and communication relays. However, identifying the optimal time and position to launch a latex high-altitude balloon is still a challenging and multifaceted problem. For example, tasks such as forest fire tracking place geometric constraints on the launch location of the balloon. Furthermore, identifying the most optimal location also heavily depends on atmospheric conditions. We first illustrate how reinforcement learning-based controllers, frequently used for station-keeping tasks, can exploit the environment. This exploitation can degrade performance on unseen weather patterns and affect station-keeping performance when identifying an optimal launch configuration. Valuing all states equally in the region, the agent exploits the region's geometry by flying near the edge, leading to risky behaviours. We propose a modification which compensates for this exploitation and finds this leads to, on average, higher steps within the target region on unseen data. Then, we illustrate how Bayesian Optimisation (BO) can identify the optimal launch location to perform station-keeping tasks, maximising the return from a given rollout. We show BO can find this launch location in fewer steps compared to other optimisation methods. Results indicate that, surprisingly, the most optimal location to launch from is not commonly within the target region. Please find further information about our project at https://sites.google.com/view/bo-lauch-balloon/.

Small unmanned aerial vehicles (UAVs) have gained significant interest in the last decade. More specifically these vehicles have the capacity to impact package delivery logistics in a disruptive way. This paper reviews research problems and state‐of‐the‐art solutions that facilitate package delivery. Different aerial manipulators and grippers are listed along with control techniques to address stability issues. Landing on a platform is next discussed which encompasses static and dynamic platforms. Landing on a dynamic platform presents further challenges. This includes delayed control responses and poor precision of the relative motion between the platform and the aerial vehicle. Subsequently, risks such as weather conditions, state estimation, and collision avoidance to ensure safe transit is considered. Finally, delivery UAV routing is investigated which categorizes the topic into two areas: drone operations and drone–truck collaborative operations. Additionally, we compare the solutions against design, environmental, and legal constraints.

With the recent influx in demand for multi-robot systems throughout industry and academia, there is an increasing need for faster, robust, and generalizable path planning algorithms. Similarly, given the inherent connection between control algorithms and multi-robot path planners, there is in turn an increased demand for fast, efficient, and robust controllers. We propose a scalable joint path planning and control algorithm for multi-robot systems with constrained behaviours based on factor graph optimization. We demonstrate our algorithm on a series of hardware and simulated experiments. Our algorithm is consistently able to recover from disturbances and avoid obstacles while outperforming state-of-the-art methods in optimization time, path deviation, and inter-robot errors. See the code and supplementary video for experiments.

The creation of accurate virtual models of real-world objects is imperative to robotic simulations and applications such as computer vision, artificial intelligence, and machine learning. This paper documents the different methods employed for generating a database of mesh models of real-world objects. These methods address the tedious and time-intensive process of manually generating the models using CAD software. Essentially, DSLR/phone cameras were employed to acquire images of target objects. These images were processed using a photogrammetry software known as Meshroom to generate a dense surface reconstruction of the scene. The result produced by Meshroom was edited and simplified using MeshLab, a mesh-editing software to produce the final model. Based on the obtained models, this process was effective in modelling the geometry and texture of real-world objects with high fidelity. An active 3D scanner was also utilized to accelerate the process for large objects. All generated models and captured images are made available on the website of the project.

Plastic pollution presents an escalating global issue, impacting health and environmental systems, with micro- and nanoplastics found across mediums from potable water to air. Traditional methods for studying these contaminants are labor-intensive and time-consuming, necessitating a shift towards more efficient technologies. In response, this paper introduces micro- and nanoplastics (MiNa), a novel and open-source dataset engineered for the automatic detection and classification of micro and nanoplastics using object detection algorithms. The dataset, comprising scanning electron microscopy images simulated under realistic aquatic conditions, categorizes plastics by polymer type across a broad size spectrum. We demonstrate the application of state-of-the-art detection algorithms on MiNa, assessing their effectiveness and identifying the unique challenges and potential of each method. The dataset not only fills a critical gap in available resources for microplastic research but also provides a robust foundation for future advancements in the field.

We present DPPE, a dense pose estimation algorithm that functions over a Plenoxels environment. Recent advances in neural radiance field techniques have shown that it is a powerful tool for environment representation. More recent neural rendering algorithms have significantly improved both training duration and rendering speed. Plenoxels introduced a fully-differentiable radiance field technique that uses Plenoptic volume elements contained in voxels for rendering, offering reduced training times and better rendering accuracy, while also eliminating the neural net component. In this work, we introduce a 6-DoF monocular RGB-only pose estimation procedure for Plenoxels, which seeks to recover the ground truth camera pose after a perturbation. We employ a variation on classical template matching techniques, using stochastic gradient descent to optimize the pose by minimizing errors in re-rendering. In particular, we examine an approach that takes advantage of the rapid rendering speed of Plenoxels to numerically approximate part of the pose gradient, using a central differencing technique. We show that such methods are effective in pose estimation. Finally, we perform ablations over key components of the problem space, with a particular focus on image subsampling and Plenoxel grid resolution. Project website: https://sites.google.com/view/dppe

With the rising prominence of WiFi in common spaces, efforts have been made in the robotics community to take advantage of this fact by incorporating WiFi signal measurements in indoor SLAM (Simultaneous Localization and Mapping) systems. SLAM is essential in a wide range of applications, especially in the control of autonomous robots. This paper describes recent work in the development of WiFi-based localization and addresses the challenges currently faced in achieving WiFi-based geometric mapping. Inspired by the field of research into k-visibility, this paper presents the concept of inverse k-visibility and proposes a novel algorithm that allows robots to build a map of the free space of an unknown environment, essential for planning, navigation, and avoiding obstacles. Experiments performed in simulated and real-world environments demonstrate the effectiveness of the proposed algorithm.