Context Helicopter-based shooting has been widely used to harvest deer or control overabundant populations in Australasia, but the effectiveness and cost of this method as a deer control tool has seldom been evaluated. Aims We evaluated the effectiveness and costs of helicopter-based shooting of fallow deer (Dama dama) and chital deer (Axis axis) in eastern Australia by quantifying (1) reductions in density, (2) the relationship between numbers killed per hour and deer density (i.e. the functional response), (3) the costs of control and (4) the effort–outcome and cost–outcome relationships. Methods We evaluated the costs and effectiveness of 12 aerial shooting operations aiming to reduce fallow deer (n = 8) or chital deer (n = 4) population densities at nine sites in eastern Australia. Sites were characterised by fragmented woodland, and all but one operation aimed to reduce grazing competition with livestock. We used pre-control population density estimates and operational monitoring data to estimate the costs and outcomes of each operation. We combined data from all operations to estimate the relationship between shooting effort and population reduction, as well as costs associated with different levels of effort. Key results Population reductions for operations ranged from 5% to 75% for fallow deer, and from 48% to 88% for chital deer. The greatest population reductions occurred when effort per unit area was greatest, and the largest reductions in deer density occurred when shooting was conducted in consecutive years. The functional response of hourly kills to deer density was best described by a modified Ivlev model, with the asymptotic kill rate estimated to be 50 deer per hour. There was no support for the existence of a prey refuge, that is, a threshold population density below which no deer could be shot. Helicopter charter was the primary cost of helicopter-based shooting programs, followed by labour; firearm and ammunition costs were relatively minor. Conclusions Helicopter-based shooting can rapidly reduce deer populations over large geographic areas, but the magnitude of the reduction depends on the effort (hours of shooting) per deer per km2. Implications Aerial shooting operations should include a pre-control population survey so that (1) measurable objectives can be established, (2) the likely level of effort and cost required for objectives to be met can be estimated and planned for, and (3) the realised population reduction can be estimated.

Helicopter-based shooting is an effective management tool for large vertebrate pest animals. However, animals in low-density populations and/or dense habitat can be difficult to locate visually. Thermal-imaging technology can increase detections in these conditions. We used thermal-imaging equipment with a specific helicopter crew configuration to assist in aerial culling for feral pigs ( Sus scrofa ) and fallow deer ( Dama dama ) in South Australia in 2021. Seventy-two percent of pigs and 53% of deer were first detected in dense canopy/tall forest habitat. Median time from the first impact shot to incapacitation was < 12 s. The culling rate (animals hour −1 ) doubled compared to visual shoots over the same populations and the wounding rate was zero resulting in a incapacitation efficiency of 100%. The crew configuration gave the shooter a wide field of view and the thermal operator behind the shooter provided essential support to find new and escaping animals, and to confirm species identification and successful removal. The crew configuration allowed for successful target acquisition and tracking, with reduced target escape. The approach can increase the efficiency of aerial culling, has the potential to increase the success of programs where eradication is a viable option, and can improve animal welfare outcomes by reducing wounding rates and the escape of target animals.

Australia has multiple lagoviruses with differing pathogenicity. The circulation of these viruses was traditionally determined through opportunistic sampling events. In the lead up to the nationwide release of RHDVa-K5 (GI.1aP-GI.1a) in 2017, an existing citizen science program, RabbitScan, was augmented to allow members of the public to submit samples collected from dead leporids for lagovirus testing. This study describes the information obtained from the increased number of leporid samples received between 2015 and 2022 and focuses on the recent epidemiological interactions and evolutionary trajectory of circulating lagoviruses in Australia between October 2020 and December 2022. A total of 2771 samples were tested from January 2015 to December 2022, of which 1643 were lagovirus-positive. Notable changes in the distribution of lagovirus variants were observed, predominantly in Western Australia, where RHDV2-4c (GI.4cP-GI.2) was detected again in 2021 after initially being reported to be present in 2018. Interestingly, we found evidence that the deliberately released RHDVa-K5 was able to establish and circulate in wild rabbit populations in WA. Overall, the incorporation of citizen science approaches proved to be a cost-efficient method to increase the sampling area and enable an in-depth analysis of lagovirus distribution, genetic diversity, and interactions. The maintenance of such programs is essential to enable continued investigations of the critical parameters affecting the biocontrol of feral rabbit populations in Australia, as well as to enable the detection of any potential future incursions.

Data and code accompanying: Bengsen, A. J., Forsyth, D. M., Pople, A., Brennan, M., Amos, M., Leeson, M., Cox, T. E., Gray, B., Orgill, O., Hampton, J. O., Crittle, T. and Haebich, K. (2022). Effectiveness and costs of helicopter-based shooting of deer. Wildlife Research.

Rabbit Haemorrhagic Disease Virus (RHDV), which is a calicivirus, is used as a biocontrol agent to suppress European wild rabbit populations in Australia. The transmission of RHDV can be influenced by social interactions of rabbits; however, there is a paucity of this knowledge about juvenile rabbits and the roles they may play in the transmission of RHDV. We aimed to quantify the social interactions of juvenile (< 900 g) and adult (> 1200 g) rabbits in a locally abundant population in the Central Tablelands of New South Wales, Australia. Twenty-six juvenile and 16 adult rabbits were fitted with VHF proximity loggers to monitor intra- and inter-group pairings. Use of multiple warrens by these rabbits was investigated using VHF base stations at nine warrens and on foot with a hand-held Yagi antenna. Juvenile rabbits were strongly interconnected with both juveniles and adults within and outside their warren of capture, and almost all juveniles were well-connected to other individuals within their own social group. Inter-group pairings were infrequent and fleeting between adults. Both juvenile and adult rabbits used multiple warrens. However, visits to warrens outside their warren of capture, particularly those within 50 m, were more common and longer in duration in juveniles than in adults. The high connectivity of juveniles within and between warrens in close proximity increases potential pathogen exchange between warrens. Therefore, juvenile rabbits could be of greater importance in lagovirus transmission than adult rabbits. The strength of juvenile rabbit inter- and intra-group pairings, and their tendency to use multiple warrens, highlight their potential to act as ‘superspreaders’ of both infection and immunity for lagoviruses and other pathogens with similar lifecycles. Confirmation of this potential is required through examination of disease progress and rabbit age-related immune responses during outbreaks.

Biological invasions are a major cause of environmental and economic disruption. While ecological factors are key determinants of their success, the role of genetics has been more challenging to demonstrate. The colonization of Australia by the European rabbit is one of the most iconic and devastating biological invasions in recorded history. Here, we show that despite numerous introductions over a 70-y period, this invasion was triggered by a single release of a few animals that spread thousands of kilometers across the continent. We found genetic support for historical accounts that these were English rabbits imported in 1859 by a settler named Thomas Austin and traced the origin of the invasive population back to his birthplace in England. We also find evidence of additional introductions that established local populations but have not spread geographically. Combining genomic and historical data we show that, contrary to the earlier introductions, which consisted mostly of domestic animals, the invasive rabbits had wild ancestry. In New Zealand and Tasmania, rabbits also became a pest several decades after being introduced. We argue that the common denominator of these invasions was the arrival of a new genotype that was better adapted to the natural environment. These findings demonstrate how the genetic composition of invasive individuals can determine the success of an introduction and provide a mechanism by which multiple introductions can be required for a biological invasion.

Detecting animals to estimate abundance can be difficult, particularly when the habitat is dense or the target animals are fossorial. The recent surge in the use of thermal imagers in ecology and their use in animal detections can increase the accuracy of population estimates and improve the subsequent implementation of management programs. However, the use of thermal imagers results in many hours of captured flight videos which require manual review for confirmation of species detection and identification. Therefore, the perceived cost and efficiency trade-off often restricts the use of these systems. Additionally, for many off-the-shelf systems, the exported imagery can be quite low resolution (<9 Hz), increasing the difficulty of using automated detections algorithms to streamline the review process. This paper presents an animal species detection system that utilises the cost-effectiveness of these lower resolution thermal imagers while harnessing the power of transfer learning and an enhanced small object detection algorithm. We have proposed a distant object detection algorithm named Distant-YOLO (D-YOLO) that utilises YOLO (You Only Look Once) and improves its training and structure for the automated detection of target objects in thermal imagery. We trained our system on thermal imaging data of rabbits, their active warrens, feral pigs, and kangaroos collected by thermal imaging researchers in New South Wales and Western Australia. This work will enhance the visual analysis of animal species while performing well on low, medium and high-resolution thermal imagery.

The European rabbit (Oryctolagus cuniculus) is one of the most devastating invasive species in Australia. Since the 1950s, myxoma virus (MYXV) and rabbit haemorrhagic disease virus (RHDV) have been used to manage overabundant rabbit populations. Resistance to MYXV was observed within a few years of the release. More recently, resistance to lethal RHDV infection has also been reported, undermining the efficiency of landscape-scale rabbit control. Previous studies suggest that genetic resistance to lethal RHDV infection may differ locally between populations, yet the mechanisms of genetic resistance remain poorly understood. Here, we used genotyping by sequencing (GBS) data representing a reduced representation of the genome, to investigate Australian rabbit populations. Our aims were to understand the relationship between populations and identify possible genomic signatures of selection for RHDV resistance. One population we investigated had previously been reported to show levels of resistance to lethal RHDV infection. This population was compared to three other populations with lower or no previously reported RHDV resistance. We identified a set of novel candidate genes that could be involved in host-pathogen interactions such as virus binding and infection processes. These genes did not overlap with previous studies on RHDV resistance carried out in different rabbit populations, suggesting that multiple mechanisms are feasible. These findings provide useful insights into the different potential mechanisms of genetic resistance to RHDV virus which will inform future functional studies in this area.

Abstract Thermal imaging technology is a developing field in wildlife management. Most thermal imaging work in wildlife science has been limited to larger ungulates and surface‐dwelling mammals. Little work has been undertaken on the use of thermal imagers to detect fossorial animals and/or their burrows. Survey methods such as white‐light spotlighting can fail to detect the presence of burrows (and therefore the animals within), particularly in areas where vegetation obscures burrows. Thermal imagers offer an opportunity to detect the radiant heat from these burrows, and therefore the presence of the animal, particularly in vegetated areas. Thermal imaging technology has become increasingly available through the provision of smaller, more cost‐effective units. Their integration with drone technology provides opportunities for researchers and land managers to utilize this technology in their research/management practices. We investigated the ability of both consumer (AUD$65,000) mounted on drones to detect rabbit burrows (warrens) and entrances in the landscape as compared to visual assessment. Thermal imagery and visual inspection detected active rabbit warrens when vegetation was scarce. The presence of vegetation was a significant factor in detecting entrances (p < .001, α = 0.05). The consumer imager did not detect as many warren entrances as either the professional imager or visual inspection (p = .009, α = 0.05). Active warren entrances obscured by vegetation could not be accurately identified on exported imagery from the consumer imager and several false‐positive detections occurred when reviewing this footage. We suggest that the exportable frame rate (Hz) was the key factor in image quality and subsequent false‐positive detections. This feature should be considered when selecting imagers and suggest that a minimum export rate of 30 Hz is required. Thermal imagers are a useful additional tool to aid in identification of entrances for active warrens and professional imagers detected more warrens and entrances than either consumer imagers or visual inspection.

Rabbit haemorrhagic disease virus (RHDV) is highly pathogenic to European rabbits. Until recently, only one serotype of RHDV was known, GI.1/RHDV. RHDV2/GI.2 is a novel virus that has rapidly spread and become the dominant pathogenic calicivirus in wild rabbits worldwide. It is speculated that RHDV2 has three competitive advantages over RHDV: (a) the ability to partially overcome immunity to other variants; (b) the ability to clinically infect young rabbits; and (c) a wider host range. These differences would be expected to influence virus transmission dynamics. We used markers of recent infection (IgM/IgA antibodies) to investigate virus transmission dynamics pre and post the arrival of RHDV2. Our data set contained over 3,900 rabbits sampled across a 7-year period at 12 Australian sites. Following the arrival of RHDV2, seasonal peaks in IgM and IgA seropositivity shifted forward one season, from winter to autumn and spring to winter, respectively. Contrary to predictions, we found only weak effects of rabbit age, seropositivity to non-pathogenic calicivirus RCV-A1 and population abundance on IgM/IgA seropositivity. Our results demonstrate that RHDV2 enters rabbit populations shortly after the commencement of annual breeding cycles. Upon entering, the population RHDV2 undergoes extensive replication in young rabbits, causing clinical disease, high virus shedding, mortality and the creation of virus-laden carcasses. This results in high virus contamination in the environment, furthering the transmission of RHDV2 and initiating outbreaks, whilst simultaneously removing the susceptible cohort required for the effective transmission of RHDV. Although RHDV may enter the population at the same time point, it is sub-clinical in young rabbits, causing minimal virus shedding and low environmental contamination. Our results demonstrate a major shift in epidemiological patterns in virus transmission, providing the first evidence that RHDV2's ability to clinically infect young rabbits is a key competitive advantage in the field.

The European rabbit (Oryctolagus cuniculus) is a notorious economic and environmental pest species in its invasive range. To better understand the population and range dynamics of this species, 41 yr of abundance data have been collected from 116 unique sites across a broad range of climatic and environmental conditions in Australia. We analyzed this time series of abundance data to determine whether interannual variation in climatic conditions can be used to map historic, contemporary, and potential future fluctuations in rabbit abundance from regional to continental scales. We constructed a hierarchical Bayesian regression model of relative abundance that corrected for observation error and seasonal biases. The corrected abundances were regressed against environmental and disease variables in order to project high spatiotemporal resolution, continent-wide rabbit abundances. We show that rabbit abundance in Australia is highly variable in space and time, being driven primarily by internnual variation in temperature and precipitation in concert with the prevalence of a non-pathogenic virus. Moreover, we show that internnual variation in local spatial abundances can be mapped effectively at a continental scale using highly resolved spatiotemporal predictors, allowing "hot spots" of persistently high rabbit abundance to be identified. Importantly, cross-validated model performance was fair to excellent within and across distinct climate zones. Long-term monitoring data for invasive species can be used to map fine-scale spatiotemporal fluctuations in abundance patterns when accurately accounting for inherent sampling biases. Our analysis provides ecologists and pest managers with a clearer understanding of the determinants of rabbit abundance in Australia, offering an important new approach for predicting spatial abundance patterns of invasive species at the near-term temporal scales that are directly relevant to resource management.

The lagovirus rabbit haemorrhagic disease virus (RHDV) has been circulating in Australia since the mid-1990s when it was released to control overabundant rabbit populations. In recent years, the viral diversity of different RHDVs in Australia has increased, and currently four different types of RHDV are known to be circulating. To allow for ongoing epidemiological studies and impact assessments of these viruses on Australian wild rabbit populations, it is essential that serological tools are updated. To this end, reference sera were produced against all four virulent RHDVs (RHDV, RHDV2 and two different strains of RHDVa) known to be present in Australia and tested in a series of available immunological assays originally developed for the prototype RHDV, to assess patterns of cross-reactivity and the usefulness of these assays to detect lagovirus antibodies, either in a generic or specific manner. Enzyme-linked immunosorbent assays (ELISAs) developed to detect antibody isotypes IgM, IgA and IgG were sufficiently cross-reactive to detect antibodies raised against all four virulent lagoviruses. For the more specific detection of antibodies to the antigenically more different RHDV2, a competition ELISA was adapted using RHDV2-specific monoclonal antibodies in combination with Australian viral antigen. Archival serum banks from a long-term rabbit monitoring site where rabbits were sampled quarterly over a period of 6 years were re-screened using this assay and revealed serological evidence for the arrival of RHDV2 in this population at least 5 months prior to its initial detection in Australia in a dead rabbit in May 2015. The serological methods and reference reagents described here will provide valuable tools to study presence, prevalence and impact of RHDV2 on Australian rabbit populations; however, the discrimination of different antigenic variants of RHDVs as well as mixed infections at the serological level remains challenging.

With ongoing introductions into Australia since the 1700s, the European rabbit (Oryctolagus cuniculus) has become one of the most widely distributed and abundant vertebrate pests, adversely impacting Australia's biodiversity and agroeconomy. To understand the population and range dynamics of the species and its impacts better, occurrence and abundance data have been collected by researchers and citizens from sites covering a broad spectrum of climatic and environmental conditions in Australia. The lack of a common and accessible repository for these data has, however, limited their use in determining important spatiotemporal drivers of the structure and dynamics of the geographical range of rabbits in Australia. To meet this need, we created the Australian National Rabbit Database, which combines more than 50 yr of historical and contemporary survey data collected from throughout the range of the species in Australia. The survey data, obtained from a suite of complementary monitoring methods, were combined with high-resolution weather, climate, and environmental information, and an assessment of data quality. The database provides records of rabbit occurrence (689,265 records) and abundance (51,241 records, >120 distinct sites) suitable for identifying the spatiotemporal drivers of the rabbit's distribution and for determining spatial patterns of variation in its key life-history traits, including maximum rates of population growth. Because all data are georeferenced and date stamped, they can be coupled with information from other databases and spatial layers to explore the potential effects of rabbit occurrence and abundance on Australia's native wildlife and agricultural production. The Australian National Rabbit Database is an important tool for understanding and managing the European rabbit in its invasive range and its effects on native biodiversity and agricultural production. It also provides a valuable resource for addressing questions related to the biology, success, and impacts of invasive species more generally. No copyright or proprietary restrictions are associated with the use of this data set other than citation of this Data Paper.

Multi-strain, host-disease dynamics describe a system where multiple strains of a pathogen compete for susceptible individuals of a single host. The theoretical properties of these systems have been well studied, but there are few empirical studies in wildlife hosts. We examined the impacts of two novel strains of rabbit haemorrhagic disease virus (RHDV) recently introduced into Australia, one inadvertently (RHDV2) and one deliberately for rabbit biocontrol (RHDV-K5), by analysing long-term monitoring data for introduced European rabbits Oryctolagus cuniculus from 18 sites throughout Australia. We examined population-level impacts using rabbit spotlight counts pre- and post-arrival of the two strains. We also analysed serological data to determine potential interactions among the introduced and existing field strains of RHDV, as well as a pre-existing benign strain of calicivirus (RCV-A1). Serological analyses suggested that RHDV2 arrived in Australia during spring 2014 and spread rapidly through the Australian rabbit population within 2 years. Following the establishment of RHDV2, rabbit abundance was reduced by an average of 60%, with impacts most pronounced in South and Western Australia. In contrast, the deliberate release of RHDV-K5 had little impact on rabbit populations. Although RHDV2 has spread rapidly throughout Australia, our serological analyses do not support the observation that RHDV2 is rapidly replacing existing field strains of RHDV, as was previously reported in Australia and Europe. Nevertheless, RHDV2 has negatively impacted the ability of RHDV and RCV-A1 to spread within rabbit populations, most likely due to its ability to infect juvenile rabbits, thereby removing them from the pool of susceptible individuals available to be infected by competing strains. Synthesis and applications. The impact of the release of a novel strain of rabbit haemorrhagic disease virus (RHDV-K5) for rabbit biocontrol in Australia has been suppressed by the emergence of a competing strain, RHDV2. Hence, the success of further releases of similar RHDV strains for rabbit biocontrol appears doubtful. Despite this, RHDV2 has suppressed rabbit abundances by an average of 60%, with impacts most pronounced in South and Western Australia. Whether the incursion of RHDV2 leads to the competitive exclusion of other endemic RHDV strains remains to be resolved. However, the existence of partial cross-immunity could allow some level of coexistence between RHDV2 and RHDV strains, at least in the medium term.

Abstract In its invasive range in Australia, the European rabbit threatens the persistence of native flora and fauna and damages agricultural production. Understanding its distribution and ecological niche is critical for developing management plans to reduce populations and avoid further biodiversity and economic losses. We developed an ensemble of species distribution models (SDMs) to determine the geographic range limits and habitat suitability of the rabbit in Australia. We examined the advantage of incorporating data collected by citizens (separately and jointly with expert data) and explored issues of spatial biases in occurrence data by implementing different approaches to generate pseudo‐absences. We evaluated the skill of our model using three approaches: cross‐validation, out‐of‐region validation, and evaluation of the covariate response curves according to expert knowledge of rabbit ecology. Combining citizen and expert occurrence data improved model skill based on cross‐validation, spatially reproduced important aspects of rabbit ecology, and reduced the need to extrapolate results beyond the studied areas. Our ensemble model projects that rabbits are distributed across approximately two thirds of Australia. Annual maximum temperatures >25°C and annual minimum temperatures >10°C define, respectively, the southern and northern most range limits of its distribution. In the arid and central regions, close access to permanent water (≤~ 0.4 km) and reduced clay soil composition (~20%–50%) were the major factors influencing the probability of occurrence of rabbits. Synthesis and applications. Our results show that citizen science data can play an important role in managing invasive species by providing missing information on occurrences in regions not surveyed by experts because of logistics or financial constraints. The additional sampling effort provided by citizens can improve the capacity of SDMs to capture important elements of a species ecological niche, improving the capacity of statistical models to accurately predict the geographic range of invasive species.

ABSTRACT The viral biocontrol agents Myxoma virus (MYXV) and Rabbit Haemorrhagic Disease Virus (RHDV1), released in 1950 and 1996 respectively, are the only control tools to have resulted in significant and lasting landscape-scale suppression of rabbit populations in Australia. Multiple conservation benefits and significant economic savings have resulted from the long-term and widespread reductions in rabbit numbers and impacts. In an effort to ‘boost’ rabbit biocontrol, an additional variant of RHDV1 ('K5') was recently released nationwide to counteract the decreasing effectiveness of both RHDV1 and MYXV that results from the evolutionary ‘arms race’ between viruses and their hosts. Two years prior to the K5 release, an exotic RHDV strain (RHDV2) appeared in Australia. The commercially available vaccine used to protect pet and farmed rabbits against the officially released K5 was ineffective against the exotic RHDV2, resulting in numerous deaths of domestic rabbits. This created substantial confusion about which strain was released as a biocontrol tool, as well as renewed concerns amongst pet rabbit owners and rabbit farmers about the use of viruses as lethal rabbit control tools in general. Ongoing effective control of wild rabbits in Australia is absolutely essential to protect the substantial conservation gains made by the long-term suppression of rabbit numbers over the past decades, and there is currently no alternative population control tool to achieve this at the required landscape scale. Vaccine formulations need updating to protect non-target farmed and pet rabbits from circulating field variants, including RHDV2, and to increase public acceptance for the ongoing use of viral biocontrol for feral rabbit populations.

The increasing popularity of citizen science in ecological research has created opportunities for data collection from large teams of observers that are widely dispersed. We established a citizen science program to complement the release of a new variant of the rabbit biological control agent, rabbit haemorrhagic disease virus (RHDV), known colloquially as K5, across Australia. We evaluated the impact of K5 on the national rabbit population and compared citizen science and professionally-collected spotlight count data. Of the citizen science sites (n = 219), 93% indicated a decrease in rabbit abundance following the release of K5. The overall finite monthly growth rate in rabbit abundance was estimated as 0.66 (95%CI, 0.26, 1.03), averaging a monthly reduction of 34% at the citizen science sites one month after the release. No such declines were observed at the professionally monitored sites (n = 22). The citizen science data submissions may have been unconsciously biased or the number of professional sites may have been insufficient to detect a change. Citizen science participation also declined by 56% over the post-release period. Future programs should ensure the use of blinded trials to check for unconscious bias and consider how incentives and/or the good will of the participants can be maintained throughout the program.

ABSTRACT Rabbit hemorrhagic disease virus 2 (RHDV2; Lagovirus GI.2) is a pathogenic calicivirus that affects European rabbits ( Oryctolagus cuniculus ) and various hare ( Lepus ) species. GI.2 was first detected in France in 2010 and subsequently caused epidemics in wild and domestic lagomorph populations throughout Europe. In May 2015, GI.2 was detected in Australia. Within 18 months of its initial detection, GI.2 had spread to all Australian states and territories and rapidly became the dominant circulating strain, replacing Rabbit hemorrhagic disease virus (RHDV/GI.1) in mainland Australia. Reconstruction of the evolutionary history of 127 Australian GI.2 isolates revealed that the virus arrived in Australia at least several months before its initial description and likely circulated unnoticed in wild rabbit populations in the east of the continent prior to its detection. GI.2 sequences isolated from five hares clustered with sequences from sympatric rabbit populations sampled contemporaneously, indicating multiple spillover events into hares rather than an adaptation of the Australian GI.2 to a new host. Since the presence of GI.2 in Australia may have wide-ranging consequences for rabbit biocontrol, particularly with the release of the novel biocontrol agent GI.1a/RHDVa-K5 in March 2017, ongoing surveillance is critical to understanding the interactions of the various lagoviruses in Australia and their impact on host populations. IMPORTANCE This study describes the spread and distribution of Rabbit hemorrhagic disease virus 2 (GI.2) in Australia since its first detection in May 2015. Within the first 18 months following its detection, RHDV2 spread from east to west across the continent and became the dominant strain in all mainland states of Australia. This has important implications for pest animal management and for owners of pet and farmed rabbits, as there currently is no effective vaccine available in Australia for GI.2. The closely related RHDV (GI.1) is used to control overabundant wild rabbits, a serious environmental and agricultural pest in this country, and it is currently unclear how the widespread circulation of GI.2 will impact ongoing targeted wild rabbit management operations.