Interferometric observations of gravitational microlensing events offer an opportunity for precise, efficient, and direct mass and distance measurements of lensing objects, especially those of isolated neutron stars and black holes. However, such observations have previously been possible for only a handful of extremely bright events. The recent development of a dual-field interferometer, GRAVITY Wide, has made it possible to reach out to significantly fainter objects and increase the pool of microlensing events amenable to interferometric observations by 2 orders of magnitude. Here, we present the first successful observation of a microlensing event with GRAVITY Wide and the resolution of microlensed images in the event OGLE-2023-BLG-0061/KMT-2023-BLG-0496. We measure the angular Einstein radius of the lens with subpercent precision, θ E = 1.280 ± 0.009 mas. Combined with the microlensing parallax detected from the event light curve, the mass and distance to the lens are found to be 0.472 ± 0.012 M ⊙ and 1.81 ± 0.05 kpc, respectively. We present the procedure for the selection of targets for interferometric observations and discuss possible systematic effects affecting GRAVITY Wide data. This detection demonstrates the capabilities of the new instrument, and it opens up completely new possibilities for the follow-up of microlensing events and future routine discoveries of isolated neutron stars and black holes.

In the GRAVITY+ project, GRAVITY is presently undergoing a series of upgrades to enhance its performance, add wide field capability and thereby expand its sky coverage. Some aspects of these improvements have already been implemented and commissioned by the end of 2021, making them accessible to the community. The augmentation of sky coverage involves increasing the maximum angular separation between the celestial science object and the fringe tracking object from the previous 2 arcseconds (limited by the field of view of the VLTI) to 20 - 30 arcseconds (constrained by atmospheric conditions during observation). Phase 1 of GRAVITY+ Wide utilizes the earlier PRIMA Differential Delay Lines to compensate for the optical path length variation between the science and fringe tracking beams throughout an observation. In phase 2, we are upgrading the existing beam compressors (BC) to integrate optical path length difference compensation directly into the BC. This modification eliminates five optical reflections per beam, thereby enhancing the optical throughput of the VLTI-GRAVITY [GRAPHICS] system and the bandwidth of the vibrational control. We will present the implementation of phase 2 and share preliminary results from our testing activities for GRAVITY+ Wide.

The GRAVITY+ project consists of instrumental upgrades to the Very Large Telescope Interferometer (VLTI) for faint-science, high-contrast, milliarcsecond interferometric imaging. As an integral part of the GRAVITY+ Adaptive Optics (AO) architecture, the Wavefront Sensor (WFS) subsystem corrects image distortions caused by the turbulence of Earth's atmosphere. We present the opto-mechanical design of the WFS subsystem and the design strategies used to implement two payloads positioned diagonally opposite each other - Natural Guide Star (NGS) and Laser Guide Star (LGS) - within a single compact design structure. We discuss the implementation of relative motions of the two payloads covering their respective patrol fields and a nested motion within the LGS Payload covering the complete Sodium layer profile in the Earth's atmosphere.

The GRAVITY instrument has transformed the field of near-infrared interferometry and is redefining the limits of ground-based observations. In Galactic Center observations, this is shown by routinely achieving below 50 μas uncertainty on astrometric measurements within a 5-minute exposure and detecting stars fainter than 19th magnitude. Nevertheless, systematic effects are still limiting the instrument's performance. In this talk, I will introduce two observing modes to overcome these limitations: Pupil modulation to improve the astrometry and metrology attenuation to overcome SNR limitations. I will detail these two modes and show how significant the improvements are on examples of on-sky data.

Performances of an adaptive optics (AO) system are directly linked with the quality of its alignment. During the instrument calibration, having open loop fast tools with a large capture range are necessary to quickly assess the system misalignment and to drive it towards a state allowing to close the AO loop. During operation, complex systems are prone to misalignments (mechanical flexions, rotation of optical elements, etc.) that potentially degrade the AO performances, creating a need for a monitoring tool to tackle their driftage. In this work, we first present an improved perturbative method to quickly assess large lateral errors in open loop. It uses the spatial correlation of the measured interaction matrix of a limited number of 2D spatial modes with a synthetic model. Then, we introduce a novel solution to finely measure and correct these lateral errors via the closed loop telemetry. Non-perturbative, this method consequently does not impact the science output of the instrument. It is based on the temporal correlation of 2D spatial frequencies in the deformable mirror commands. It is model-free (no need of an interaction matrix model) and sparse in the Fourier space, making it fast and easily scalable to complex systems such as future extremely large telescopes. Finally, we present some results obtained on the development bench of the GRAVITY+ extreme AO system (Cartesian grid, 1432 actuators). In addition, we show with on-sky results gathered with CHARA and GRAVITY/CIAO that the method is adaptable to non-conventional AO geometries (hexagonal grids, 60 actuators).

In the context of the GRAVITY+ upgrade, the adaptive optics (AO) systems of the GRAVITY interferometer are undergoing a major lifting. The current CILAS deformable mirrors (DM, 90 actuators) will be replaced by ALPAO kilo-DMs (43x43, 1432 actuators). On top of the already existing 9x9 Shack-Hartmann wavefront sensors (SH-WFS) for infrared (IR) natural guide star (NGS), new 40x40 SH-WFSs for visible (VIS) NGS will be deployed. Lasers will also be installed on the four units of the Very Large Telescope to provide a laser guide star (LGS) option with 30x30 SH-WFSs and with the choice to either use the 9x9 IR-WFSs or 2x2 VIS-WFSs for low order sensing. Thus, four modes will be available for the GRAVITY+ AO system (GPAO): IR-NGS, IR-LGS, VIS-NGS and VIS-LGS. To prepare the instrument commissioning and help the observers to plan their observations, a tool is needed to predict the performances of the different modes and for different observing conditions (NGS magnitude, science object magnitude, turbulence conditions,...). We developed models based on a Mar ' echal approximation to predict the Strehl ratio of the four GPAO modes in order to feed the already existing tool that simulates the GRAVITY performances. Waiting for commissioning data, our model was validated and calibrated using the TIPTOP toolbox, a Point Spread Function simulator based on the computation of Power Spectrum Densities. In this work, we present our models of the NGS modes of GPAO and their calibration with TIPTOP.

We resolve the multiple images of the binary-lens microlensing event ASASSN-22av using the GRAVITY instrument of the Very Large Telescope Interferometer (VLTI). The light curves show weak binary-lens perturbations, complicating the analysis, but the joint modeling with the VLTI data breaks several degeneracies, arriving at a strongly favored solution. Thanks to precise measurements of the angular Einstein radius theta E = 0.724 +/- 0.002 mas and microlens parallax, we determine that the lens system consists of two M dwarfs with masses of M 1 = 0.258 +/- 0.008 M circle dot and M 2 = 0.130 +/- 0.007 M circle dot, a projected separation of r perpendicular to = 6.83 +/- 0.31 au, and a distance of D L = 2.29 +/- 0.08 kpc. The successful VLTI observations of ASASSN-22av open up a new path for studying intermediate-separation (i.e., a few astronomical units) stellar-mass binaries, including those containing dark compact objects such as neutron stars and stellar-mass black holes.

We present in this proceeding the results of the test phase of the GRAVITY+ adaptive optics. This extreme AO will enable both high-dynamic range observations of faint companions (including exoplanets) thanks to a 40x40 sub-apertures wavefront control, and sensitive observations (including AGNs) thanks to the addition of a laser guide star to each UT of the VLT. This leap forward is made thanks to a mostly automated setup of the AO, including calibration of the NCPAs, that we tested in Europe on the UT+atmosphere simulator we built in Nice. We managed to reproduce in laboratory the expected performances of all the modes of the AO, including under non-optimal atmospheric or telescope alignment conditions, giving us the green light to proceed with the Assembly, Integration and Verification phase in Paranal.

We present latest results and further development of the image reconstruction tool GRAVITY-RESOLVE (G^R), which is specifically designed for Galactic Center observations with the near-infrared phase-referencing VLTI instrument GRAVITY. We show deep images of the Galactic Center in recent years and movies in which the stellar motion around the central massive black hole SgrA* becomes apparent on yet unmatched scales. Moreover, we present a first result of the newly implemented mosaicing method in G^R to jointly reconstruct multiple datasets which have been separately recorded on sky.

The GRAVITY instrument has been revolutionary for near-infrared interferometry by pushing sensitivity and precision to previously unknown limits. With the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) in GRAVITY+, these limits will be pushed even further, with vastly improved sky coverage, as well as faint-science and high-contrast capabilities. This upgrade includes the implementation of wide-field off-axis fringe-tracking, new adaptive optics systems on all Unit Telescopes, and laser guide stars in an upgraded facility. GRAVITY+ will open up the sky to the measurement of black hole masses across cosmic time in hundreds of active galactic nuclei, use the faint stars in the Galactic centre to probe General Relativity, and enable the characterisation of dozens of young exoplanets to study their formation, bearing the promise of another scientific revolution to come at the VLTI.

As part of the GRAVITY^+ project, the near-infrared beam combiner GRAVITY and the VLTI are currently undergoing a series of significant upgrades to further improve the performance and sky coverage. The instrumental changes will be transformational, and for instance uniquely position GRAVITY to observe the broad line region of hundreds of Active Galactic Nuclei (AGN) at a redshift of two and higher. The increased sky coverage is achieved by enlarging the maximum angular separation between the celestial science object (SC) and the off-axis fringe tracking (FT) star from currently 2 arcseconds (arcsec) up to unprecedented 30 arcsec, limited by the atmospheric conditions. This was successfully demonstrated at the VLTI for the first time.

We present the testbench aimed at integrating the GRAVITY+ adaptive optics GPAO. It consists of two independent elements, one reproducing the Coudé focus of the telescope, including the telescope deformable mirror mount (with its surface facing down), and one reproducing the Coudé room opto-mechanical environment, including a downwards-propagating beam, and the telescope mechanical interfaces in order to fit in the new GPAO wavefront sensor. We discuss in this paper the design of this bench and the solutions we adopted to keep the cost low, keep the design compact (allowing it to be fully contained in a 20 sqm clean room), and align the bench independently from the adaptive optics. We also discuss the features we have set in this bench.

Context. The Galactic Center black hole and the nuclear star cluster are surrounded by a clumpy ring of gas and dust, the circumnuclear disk (CND), that rotates about them at a standoff distance of ≃1.5 pc. The mass and density of individual clumps in the CND are disputed. Aims. We seek to use H2 to characterize the clump size distribution and to investigate the morphology and dynamics of the interface between the ionized interior layer of the CND and the molecular reservoir lying farther out (corresponding to the inner rim of the CND, illuminated in ultraviolet light by the central star cluster). Methods. We have observed two fields of approximately 20″ × 20″ in the CND at near-infrared wavelengths with the OSIRIS spectro-imager at the Keck Observatory. These two fields, located at the approaching and receding nodes of the CND, best display this interface. Our data cover two H2 lines as well as the Brγ line (tracing H II). We have developed the tool CubeFit, an original method for extracting maps of continuous physical parameters (such as the velocity field and velocity dispersion) from integral-field spectroscopy data, using regularization to largely preserve spatial resolution in regions of low signal-to-noise ratio. Results. This original method enables us to isolate compact, bright features in the interstellar medium of the CND. Several clumps in the southwestern field assume the appearance of filaments, many of which are parallel to one another. We conclude that these clumps cannot be self-gravitating.

We present the testbench aimed at integrating the GRAVITY+ adaptive optics GPAO. It consists of two independent elements, one reproducing the Coudé focus of the telescope, including the telescope deformable mirror mount (with its surface facing down), and one reproducing the Coudé room opto-mechanical environment, including a downwards-propagating beam, and the telescope mechanical interfaces in order to fit in the new GPAO wavefront sensor. We discuss in this paper the design of this bench and the solutions we adopted to keep the cost low, keep the design compact (allowing it to be fully contained in a 20 sqm clean room), and align the bench independently from the adaptive optics. We also discuss the features we have set in this bench.

During the past years, the VLTI-instrument GRAVITY has made spectacular discoveries with phase-referenced interferometric imaging with milliarcsecond resolution and ten microarcsecond astrometry. Here, we report on the upgrade of the GRAVITY science spectrometer with two new grisms in October 2019, increasing the instrument throughput by a factor > 2. This improvement was made possible by using a high refractive index Germanium substrate, which reduces the grism and groove angles, and by successfully applying an anti-reflection coating to the ruled surface to overcome Fresnel losses. We present the design, manufacturing, and laboratory testing of the new grisms, as well as the results from the re-commissioning on sky.

Supermassive black holes in the centre of galaxies dominate the gravitational potential of their surrounding stellar clusters. In these dense environments, stars follow nearly Keplerian orbits, which get slowly distorted as a result of the potential fluctuations generated by the stellar cluster itself. In particular, stars undergo a rapid relaxation of their eccentricities through both resonant and non-resonant processes. An efficient implementation of the resonant diffusion coefficients allows for detailed and systematic explorations of the parameter space describing the properties of the stellar cluster. In conjunction with recent observations of the S-cluster orbiting SgrA*, this framework can be used to jointly constrain the distribution of the unresolved, old, background stellar cluster and the characteristics of a putative dark cluster. Specifically, we show how this can be used to estimate the typical mass and cuspide exponent of intermediate-mass black holes consistent with the relaxed state of the distribution of eccentricities in the observed S-cluster. This should prove useful in constraining supermassive black hole formation scenarios.

We present the successful demonstration of world's first large-separation ~30" off-axis fringe tracking with four telescopes in October 2019. With this technique we increase the sky-coverage for optical interferometry by orders of magnitude compared to current technology. Following the early work at the Palomar Testbed Interferometer, the first demonstration of off-axis fringe tracking at the Keck Interferometer and with PRIMA at the ESO Very Large Telescope Interferometer, and the breakthrough with the GRAVITY Galactic Center observations, we enhanced the VLTI infrastructure for GRAVITY to take advantage of the PRIMA Star separators and Differential Delay Lines for off-axis fringe tracking. In our presentation we give an introduction to the subject, present the enhancements of the VLTI, and present our results from the first on-sky operation in October 2019, with observations of the Orion Trapezium Cluster, a field brown dwarf, and a high redshift quasar.

The European Southern Observatory gives the opportunity to develop new third generation instruments for the Very Large Telescope Interferometer. Therefore, adaptive optics systems need to be upgraded, either for NAOMI on a 1.8-m auxiliary telescope or for MACAO on a 8-m unit telescope. It enables to access to new science cases such as active galactic nuclei with the GRAVITY+ project. We study here the requirements of such AO upgrade by increasing the number of sub-apertures of the wave-front sensor and the number of actuators of the deformable mirror. We evaluate the needs for a high-Strehl mode in the visible and near infrared wavelengths in various conditions of observation. We present numerical simulations to quantify the performance. We show that a moderate upgrade of NAOMI, and a significant upgrade of MACAO can enable both better dynamic range and sensitivity with the VLTI.

As the closest example of a galactic nucleus, the Galactic center (GC) presents an exquisite laboratory for learning about supermassive black holes (SMBH) and their environment. We describe several exciting new research directions that, over the next 10 years, hold the potential to answer some of the biggest scientific questions raised in recent decades: Is General Relativity (GR) the correct description for supermassive black holes? What is the nature of star formation in extreme environments? How do stars and compact objects dynamically interact with the supermassive black hole? What physical processes drive gas accretion in low-luminosity black holes? We describe how the high sensitivity, angular resolution, and astrometric precision offered by the next generation of large ground-based telescopes with adaptive optics will help us answer these questions. First, it will be possible to obtain precision measurements of stellar orbits in the Galaxy's central potential, providing both tests of GR in the unexplored regime near a SMBH and measurements of the extended dark matter distribution that is predicted to exist at the GC. Second, we will probe stellar populations at the GC to significantly lower masses than are possible today, down to brown dwarfs. Their structure and dynamics will provide an unprecedented view of the stellar cusp around the SMBH and will distinguish between models of star formation in this extreme environment. This increase in depth will also allow us to measure the currently unknown population of compact remnants at the GC by observing their effects on luminous sources. Third, uncertainties on the mass of and distance to the SMBH can be improved by a factor of $\sim$10. Finally, we can also study the near-infrared accretion onto the black hole at unprecedented sensitivity and time resolution, which can reveal the underlying physics of black hole accretion.

Thermal dominated X-ray spectra of neutron stars in quiescent transient X-ray binaries and neutron stars that undergo thermonuclear bursts are sensitive to mass and radius. The mass-radius relation of neutron stars depends on the equation of state that governs their interior. Constraining this relation accurately is thus of fundamental importance to understand the nature of dense matter. In this context we introduce a pipeline to calculate realistic model spectra of rotating neutron stars with hydrogen and helium atmospheres. An arbitrarily fast rotating neutron star with a given equation of state generates the spacetime in which the atmosphere emits radiation. We use the Lorene/nrotstar code to compute the spacetime numerically and the ATM24 code to solve the radiative transfer equations self-consistently. Emerging specific intensity spectra are then ray-traced through the neutron star's spacetime from the atmosphere to a distant observer with the Gyoto code. Here, we present and test our fully relativistic numerical pipeline. To discuss and illustrate the importance of realistic atmosphere models we compare our model spectra to simpler models like the commonly used isotropic color-corrected blackbody emission. We highlight the importance of considering realistic model-atmosphere spectra together with relativistic ray tracing to obtain accurate predictions. We also insist on the crucial impact of the star's rotation on the observables. Finally, we close a controversy that has been appearing in the literature in the recent years regarding the validity of the ATM24 code.