The ArmazoNes high Dispersion Echelle Spectrograph (ANDES) is a powerful second-generation high-resolution spectroscopic instrument for the Extremely Large Telescope (ELT). The UBV, RIZ, and YJH modules comprise fibre-fed spectrographs of the ANDES baseline design and will offer continuous wavelength coverage of 0.35-1.8 μm, with the addition of a K-band channel providing coverage up to 2.4 μm. Coupled with a spectral resolution of ∼100,000, ANDES must deliver the required wavelength calibration stability of 1 m/s over 24 hours, with a goal of 0.02 m/s across 10 years. These requirements establish the framework for the infrared module of ANDES, the YJH Spectrograph, leading to what will likely be the largest cryogenic, ultra-stable, high-resolution spectrograph ever built, and will offer the unique ability to observe in both seeing- and diffraction-limited modes interchangeably. We present the current design and performance analysis of the ANDES YJH Spectrograph, outlining the engineering challenges encountered alongside the corresponding strategies adopted to navigate them. In particular, we detail the technology development of the primary dispersing element, an echelle grating mosaic that will span over a metre in length.

The high-resolution near-infrared spectrograph CRIRES+ at ESO VLT covers the Y, J, H, K, L and M bands. The U-Ne and Fabry-Perot calibration light sources, however, only work up to the K-band, leaving the bands L and M without wavelength calibration, and without a way to measure the inclination of the long slit relative to the detector frame. To remedy this, we present here a uniformly reprocessed archive of all public CRIRES+ L/M science observations obtained between September 2021 and March 2025, totalling 11 131 raw frames. We use the telluric modelling tool viper that fits a model to the plethora of atmospheric absorption features that exist around these wavelengths. We calibrate the slit tilt from the wavelength solutions for the nodding A and B frames that have the target in the lower and upper half of the slit, respectively. We then update the static inputs to the data reduction system with the slit tilt information and reduce the data with the standard pipeline recipes. Subsequently, we derive new wavelength scales for each observation from telluric fits on the spectra themselves, additionally interpolating the solutions for spectra that have no tellurics from the ones that have. The resulting 5649 extracted, calibrated and telluric-fitted AB nod-pair spectra, spanning 156 unique targets from 68 ESO programmes, are served through an interactive web archive at https://www.astro.uu.se/crires-lm that offers data downloads and figures for all datasets that allow an initial judgement of the data quality.

We introduce the data reduction pipeline for the Tartu Observatory Fiber-fed Echelle Spectrograph (TOFES). TOFES is installed in the Coudé room and will be connected to the 1.5 m Tartu Observatory AZT-12 telescope through a four-channel instrument adapter to be mounted at the Cassegrain focus of the telescope. The spectrograph has an average spectral resolution of 30,000 and covers the 390 to 900 nm wavelength band in a single exposure. The data reduction pipeline, based on the PyReduce package, was tested on spectra of the Sun. We also present the Spectroscopy-Toolbox package, which was developed to provide additional tools for diagnostics and spectral line identification for radial velocity measurements. The spectrograph will address a range of scientific questions, including the stellar characterisation of Herbig AeBe stars to measure accretion contamination from their protoplanetary disks, the stellar characterisation of exoplanet host-stars including the Ariel space mission targets, and radial velocity monitoring of large-scale atmospheric variability in massive stars.

Atmospheres of transiting exoplanets can be studied spectroscopically using space-based or ground-based observations. Each has its own strengths and weaknesses, so there are benefits to both approaches. This is especially true for challenging targets such as cooler, smaller exoplanets whose atmospheres likely contain many molecular species and cloud decks. We aim to study the atmosphere of the warm Neptune-like exoplanet WASP-107 b (Teq 740 K). Several molecular species have been detected in this exoplanet in recent space-based JWST studies, and we aim to confirm and expand upon these detections using ground-based VLT, evaluating how well our findings agree with previously retrieved atmospheric parameters. We observe two transits of WASP-107 b with VLT/CRIRES+ and create cross-correlation templates of the target atmosphere based on retrieval results from JWST studies. We create different templates to investigate the impact of varying volume mixing ratios of species and inclusion or exclusion of clouds. Considering this target's observational challenges, we create simulated observations prior to evaluating real data to assess expected detection significances. We report detections of two molecular species, CO ( 6 S/N) and H2O ( 4.5 S/N). This confirms previous space-based detections and demonstrates, for the first time, the capability of VLT/CRIRES+ to detect species in targets cooler than hot Jupiters using transmission spectroscopy. We show our analysis is sensitive to cloud inclusion, but less so to different volume mixing ratios. Interestingly, our detection deviates from its expected location in our Kp-vsys diagrams, and we speculate on possible reasons for this. We demonstrate that the error budget for relatively cooler exoplanets is severely reduced in comparison to hotter exoplanets, and underline need for further work in context of high-resolution spectroscopy.

Despite recent progress in the spectroscopic characterization of individual exoplanets, the atmospheres of key ultra-hot Jupiters (UHJs) still lack comprehensive investigations. These include WASP-178b, one of the most irradiated UHJs known to date. We observed the dayside emission signal of this planet with CRIRES+ in the spectral K band. By applying the cross-correlation technique and a Bayesian retrieval framework to the high-resolution spectra, we identified the emission signature of (CO)-C-12 (S/N = 8.9) and H2O (S/N = 4.9), and a strong atmospheric thermal inversion. A joint retrieval with space-based secondary eclipse measurements from TESS and CHEOPS allowed us to refine our results on the thermal profile and thus to constrain the atmospheric chemistry, yielding a solar to super-solar metallicity (1.4 +/- 1.6 dex) and a solar C/O ratio (0.6 +/- 0.2). We infer a significant excess of spectral line broadening and identify a slight Doppler-shift between the (CO)-C-12 and H2O signals. These findings provide strong evidence for a super-rotating atmospheric flow pattern and suggest the possible existence of chemical inhomogeneities across the planetary dayside hemisphere. In addition, the inclusion of photometric data in our retrieval allows us to account for stellar light reflected by the planetary atmosphere, resulting in an upper limit on the geometric albedo (0.23). The successful characterization of WASP-178b's atmosphere through a joint analysis of CRIRES+, TESS, and CHEOPS observations highlights the potential of combined studies with space- and ground-based instruments and represents a promising avenue for advancing our understanding of exoplanet atmospheres.

The first generation of ELT instruments includes an optical-infrared high resolution spectrograph, indicated as ELT-HIRES and recently christened ANDES (ArmazoNes high Dispersion Echelle Spectrograph). ANDES consists of three fibre-fed spectrographs ([U]BV, RIZ, YJH) providing a spectral resolution of similar to 100,000 with a minimum simultaneous wavelength coverage of 0.4-1.8 mu m with the goal of extending it to 0.35-2.4 mu m with the addition of an U arm to the BV spectrograph and a separate K band spectrograph. It operates both in seeing- and diffraction-limited conditions and the fibre-feeding allows several, interchangeable observing modes including a single conjugated adaptive optics module and a small diffraction-limited integral field unit in the NIR. Modularity and fibre-feeding allows ANDES to be placed partly on the ELT Nasmyth platform and partly in the Coude room. ANDES has a wide range of groundbreaking science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Among the top science cases there are the detection of biosignatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars, tests on the stability of Nature's fundamental couplings, and the direct detection of the cosmic acceleration. The ANDES project is carried forward by a large international consortium, composed of 35 Institutes from 13 countries, forming a team of almost 300 scientists and engineers which include the majority of the scientific and technical expertise in the field that can be found in ESO member states.

MOSAIC is the Multi-Object Spectrograph (MOS) for the 39m Extremely Large Telescope (ELT) of the European Southern Observatory (ESO), with unique capabilities in terms of multiplex, wavelength coverage and spectral resolution. It is a versatile multi-object spectrograph working in both the Visible and NIR domains, designed to cover the largest possible area (similar to 40 arcmin(2)) on the focal plane, and optimized to achieve the best possible signal-to-noise ratio on the faintest sources, from stars in our Galaxy to galaxies at the epoch of the reionization. In this paper we describe the main characteristics of the instrument, including its expected performance in the different observing modes. The status of the project will be briefly presented, together with the positioning of the instrument in the landscape of the ELT instrumentation. We also review the main expected scientific contributions of MOSAIC, focusing on the synergies between this instrument and other major ground-based and space facilities.

We present our numerical simulation approach for the End-to-End (E2E) model applied to various astronomical spectrographs, such as SOXS (ESO-NTT), CUBES (ESO-VLT), and ANDES (ESO-ELT), covering multiple wavelength regions. The E2E model aim at simulating the expected astronomical observations starting from the radiation of the scientific sources (or calibration sources) up to the raw-frame data produced by the detectors. The comprehensive description includes E2E architecture, computational models, and tools for rendering the simulated frames. Collaboration with Data Reduction Software (DRS) teams is discussed, along with efforts to meet instrument requirements. The contribution to the cross-correlation algorithm for the Active Flexure Compensation (AFC) system of CUBES is detailed.

In this paper, we present an overview of the software architecture for the ArmazoNes high Dispersion Echelle Spectrograph (ANDES) spectrograph, which has been developed as part of the recent System Architecture Review (SAR) held in October 2023. Our focus in this paper is twofold: we will detail about the control software and science tools that are set to be implemented. In particular, we provide a detailed view on how the ELT Instrument Control Framework has been effectively deployed to manage the complexities of a distributed instrument like ANDES. This entails a comprehensive discussion of the key architectural decisions we have made to meet the requirements of the project. Furthermore, we offer insights into the suite of science software that will be an integral part of the ANDES instrument. This includes the Exposure Time Calculator, Observation Preparation tools, and the Data Reduction Library. Finally, we provide an overview of the Data Analysis Software and the End-to-End ANDES simulator. These tools are crucial for processing and analyzing the data collected by the ANDES spectrograph.

METIS will be the first-light mid-infrared instrument at the ELT. Given the expected performance of the ELT's adaptive optics systems, METIS will be able to probe regions of the sky previously inaccessible to astronomers. In support of both the METIS integration and verification efforts as well as the astronomical community at large, the METIS pipeline team has begun work on the METIS data reduction pipeline. The METIS pipeline will be written mostly in Python to take advantage of the new data reduction tools released by ESO. The development schedule has been set in such a way that the pipeline team will be able to directly support the testing and verification efforts during the upcoming system integration phase for METIS. In order to ensure that the required pipeline functionality is available when it is needed, the recipes and workflows functionality has been broken down into four levels of readiness: skeleton, functional, performance, and science-grade. This breakdown aims to ensure a more agile approach to the pipeline implementation as well as enabling productive contributions from all members of the highly geographically distributed team.

We aim to characterise the small-scale magnetic fields for a sample of 16 Sun-like stars and investigate the capabilities of the newly upgraded near-infrared (NIR) instrument CRIRES$^+$ at the VLT in the context of small-scale magnetic field studies. Our targets also had their magnetic fields studied in the optical, which allows us to compare magnetic field properties at different spatial scales on the stellar surface and to contrast small-scale magnetic field measurements at different wavelengths. We analyse the Zeeman broadening signature for six magnetically sensitive and insensitive \ion{Fe}{I} lines in the H-band to measure small-scale magnetic fields on the stellar surface. We use polarised radiative transfer modelling and NLTE departure coefficients in combination with MCMC to determine magnetic field characteristics together with non-magnetic stellar parameters. We use two different approaches to describe small-scale magnetic fields. The first is a two-component model with a single magnetic region and a free magnetic field strength. The second model contains multiple magnetic components with fixed magnetic field strengths. We find average magnetic field strengths ranging from $\sim 0.4$ kG down to $<0.1$ kG. The results align closely with other results from high resolution NIR spectrographs such as SPIRou. We find that the small-scale fields correlate with the large-scale fields and that the small-scale fields are at least 10 times stronger than the large-scale fields inferred with Zeeman Doppler imaging. The two- and multi-component models produce systematically different results as the strong fields from the multi-component model increase the obtained mean magnetic field strength. When comparing our results with the optical measurements of small-scale fields we find a systematic offset of 2--3 times stronger fields in the optical.

We present Ly α imaging of 45 low-redshift star-forming galaxies observed with the Hubble Space Telescope. The galaxies have been selected to have moderate to high star formation rates (SFRs) using far-ultraviolet (FUV) luminosity and H α equivalent width criteria, but no constraints on Ly α luminosity. We employ a pixel stellar continuum fitting code to obtain accurate continuum-subtracted Ly α , H α , and H β maps. We find that Ly α is less concentrated than FUV and optical line emission in almost all galaxies with significant Ly α emission. We present global measurements of Ly α and other quantities measured in apertures designed to capture all of the Ly α emission. We then show how the escape fraction of Ly α relates to a number of other measured quantities (mass, metallicity, star formation, ionization parameter, and extinction). We find that the escape fraction is strongly anticorrelated with nebular and stellar extinction, weakly anticorrelated with stellar mass, but no conclusive evidence for correlations with other quantities. We show that Ly α escape fractions are inconsistent with common dust extinction laws, and discuss how a combination of radiative transfer effects and clumpy dust models can help resolve the discrepancies. We present an SFR calibration based on Ly α luminosity, where the equivalent width of Ly α is used to correct for nonunity escape fraction, and show that this relation provides a reasonably accurate SFR estimate. We also show stacked growth curves of Ly α for the galaxies that can be used to find aperture loss fractions at a given physical radius.

The dayside atmospheres of ultra-hot Jupiters (UHJs) are predicted to possess temperature inversion layers with extremely high temperatures at high altitudes. We observed the dayside thermal emission spectra of WASP-18b and WASP-76b with the new CRIRES+ high-resolution spectrograph at near-infrared wavelengths. Using the cross-correlation technique, we detected strong CO emission lines in both planets, which confirms the existence of temperature inversions on their dayside hemispheres. The two planets are the first UHJs orbiting F-type stars with CO emission lines detected; previous detections were mostly for UHJs orbiting A-type stars. Evidence of weak H2O emission signals is also found for both planets. We further applied forward-model retrievals on the detected CO lines and retrieved the temperature-pressure profiles along with the CO volume mixing ratios. The retrieved logarithmic CO mixing ratio of WASP-18b (-2.2) is slightly higher than the value predicted by the self-consistent model assuming solar abundance. For WASP-76b, the retrieved CO mixing ratio (-3.6) is broadly consistent with the value of solar abundance. In addition, we included the equatorial rotation velocity (Veq ) in the retrieval when analyzing the line profile broadening. The obtained Veq is 7.0 km/s for WASP-18b and 5.2 km/s for WASP-76b, which are consistent with the tidally locked rotational velocities.

The CRyogenic InfraRed Echelle Spectrograph (CRIRES) Upgrade project CRIRES^+ extended the capabilities of CRIRES. It transformed this VLT instrument into a cross-dispersed spectrograph to increase the wavelength range that is covered simultaneously by up to a factor of ten. In addition, a new detector focal plane array of three Hawaii 2RG detectors with a 5.3 μm cutoff wavelength replaced the existing detectors. Amongst many other improvements, a new spectropolarimetric unit was added and the calibration system has been enhanced. The instrument was installed at the VLT on Unit Telescope 3 at the beginning of 2020 and successfully commissioned and verified for science operations during 2021, partly remotely from Europe due to the COVID-19 pandemic. The instrument was subsequently offered to the community from October 2021 onwards. This article describes the performance and capabilities of the upgraded instrument and presents on sky results.

The CRyogenic InfraRed Echelle Spectrograph (CRIRES) Upgrade project CRIRES+ extended the capabilities of CRIRES. It transformed this VLT instrument into a cross-dispersed spectrograph to increase the wavelength range that is covered simultaneously by up to a factor of ten. In addition, a new detector focal plane array of three Hawaii 2RG detectors with a 5.3 mu m cutoff wavelength replaced the existing detectors. Amongst many other improvements, a new spectropolarimetric unit was added and the calibration system has been enhanced. The instrument was installed at the VLT on Unit Telescope 3 at the beginning of 2020 and successfully commissioned and verified for science operations during 2021, partly remotely from Europe due to the COVID-19 pandemic. The instrument was subsequently offered to the community from October 2021 onwards. This article describes the performance and capabilities of the upgraded instrument and presents on sky results.

CRIRES+ extended the capabilities of CRIRES, the CRyogenic InfraRed Echelle Spectrograph. It transformed this VLT instrument into a cross-dispersed spectrograph to increase the wavelength range that is covered simultaneously by a factor of ten. In addition, a new detector focal plane array of three Hawaii 2RG detectors with a 5.3 μm cut-off wavelength replaced the existing detectors. Amongst many other improvements a new spectropolarimetric unit was added and the calibration system has been enhanced. The instrument was installed at the VLT on Unit Telescope 3 beginning of 2020 and successfully commissioned and verified for science operations during 2021, partly remote from Europe due to the pandemic. The instrument was subsequently offered to the community from October 2021 onwards. This article describes the performance and capabilities of this development and presents on sky results.

In early 2020 the upgraded1 CRIRES2 instrument, was installed at the VLT, however the onset of the global pandemic prevented the completion of some aspects of the installation while characterisation and commissioning had to be conducted with a remote connection from Europe. This resulted in a somewhat experimental, ad-hoc, approach to characterisation that required tight co-ordination between Paranal scientists and the instrument team in Europe. Moreover, with the observatory operating at minimal staffing, we had to find workarounds for some unfinished parts of the installation and adapt our characterisation, calibration and operations strategies accordingly. In particular, we discuss the adaptation made to the metrology strategy that illustrates well the pragmatic and ultimately successful approach adopted for getting CRIRES+ ready for operations.

The first generation of ELT instruments includes an optical-infrared high resolution spectrograph, indicated as ELT-HIRES and recently christened ANDES (ArmazoNes high Dispersion Echelle Spectrograph). ANDES consists of three fibre-fed spectrographs (UBV, RIZ, YJH) providing a spectral resolution of ∼100,000 with a minimum simultaneous wavelength coverage of 0.4-1.8 µm with the goal of extending it to 0.35-2.4 µm with the addition of a K band spectrograph. It operates both in seeing- and diffraction-limited conditions and the fibre-feeding allows several, interchangeable observing modes including a single conjugated adaptive optics module and a small diffraction-limited integral field unit in the NIR. Its modularity will ensure that ANDES can be placed entirely on the ELT Nasmyth platform, if enough mass and volume is available, or partly in the Coudé room. ANDES has a wide range of groundbreaking science cases spanning nearly all areas of research in astrophysics and even fundamental physics. Among the top science cases there are the detection of biosignatures from exoplanet atmospheres, finding the fingerprints of the first generation of stars, tests on the stability of Nature's fundamental couplings, and the direct detection of the cosmic acceleration. The ANDES project is carried forward by a large international consortium, composed of 35 Institutes from 13 countries, forming a team of more than 200 scientists and engineers which represent the majority of the scientific and technical expertise in the field among ESO member states.

Context. The price of instruments and observing time on modern telescopes is quickly increasing. Therefore, it is worth revisiting the data reduction algorithms to extract every bit of scientific information from available observations. Echelle spectrographs are typical instruments used in high-resolution spectroscopy, but attempts to improve the wavelength coverage and versatility of these instruments has resulted in a complicated and variable footprint of the entrance slit projection onto the science detector. Traditional spectral extraction methods generally fail to perform a truly optimal extraction when the slit image is not aligned with the detector columns and, instead, is tilted or even curved.Aims. Here, we present the mathematical algorithms and examples of their application to the optimal extraction and the following reduction steps for echelle spectrometers equipped with an entrance slit that is imaged with various distortions. The new method minimises the loss of spectral resolution, maximises the signal-to-noise ratio, and efficiently identifies local outliers. In addition to the new optimal extraction, we present order splicing and a more robust continuum normalisation algorithm.Methods. We developed and implemented new algorithms that create a continuum-normalised spectrum. In the process, we account for the (variable) tilt or curvature of the slit image on the detector and achieve optimal extraction without prior assumptions about the slit illumination. Thus, the new method can handle arbitrary image slicers, slit scanning, and other observational techniques aimed at increasing the throughput or dynamic range.Results. We compare our methods with other techniques for different instruments to illustrate the superior performance of the new algorithms compared to commonly used procedures.Conclusions. Advanced modelling of the focal plane requires significant computational effort but it has proven worthwhile thanks to the retrieval of a greater store of science information from every observation. The described algorithms and tools are freely available as part of our PyReduce package.