Mini-EUSO is a wide Field-of-View (FoV, 44$^{\circ}$) telescope currently in operation from a nadia-facing UV-transparent window in the Russian Zvezda module on the International Space Station (ISS). It is the first detector of the JEM-EUSO program deployed on the ISS, launched in August 2019. The main goal of Mini-EUSO is to measure the UV emissions from the ground and atmosphere, using an orbital platform. Mini-EUSO is mainly sensitive in the 290-430 nm bandwidth. Light is focused by a system of two Fresnel lenses of 25 cm diameter each on the Photo- Detector-Module (PDM), which consists of an array of 36 Multi-Anode Photomultiplier Tubes (MAPMTs), for a total of 2304 pixels working in photon counting mode, in three different time resolutions of 2.5 ${\mu}$s, 320 ${\mu}$s, 40.96 ms operation in parallel. In the longest time scale, the data is continuously acquired to monitor the UV emission of the Earth. It is best suited for the observation of ground sources and therefore has been used for the observational campaigns of the Mini-EUSO. In this contribution, we present the assembled UV flasher, the operation of the field campaign and the analysis of the obtained data. The result is compared with the overall efficiency computed from the expectations which takes into account the atmospheric attenuation and the parameterization of different effects such as the optics efficiency, the MAPMT detection efficiency, BG3 filter transmittance and the transparency of the ISS window.

The Fluorescence Telescope is one of the two telescopes on board the Extreme Universe Space Observatory on a Super Pressure Balloon II (EUSO-SPB2). EUSO-SPB2 is an ultra-long-duration balloon mission that aims at the detection of Ultra High Energy Cosmic Rays (UHECR) via the fluorescence technique (using a Fluorescence Telescope) and of Ultra High Energy (UHE) neutrinos via Cherenkov emission (using a Cherenkov Telescope). The mission is planned to fly in 2023 and is a precursor of the Probe of Extreme Multi-Messenger Astrophysics (POEMMA). The Fluorescence Telescope is a second generation instrument preceded by the telescopes flown on the EUSO-Balloon and EUSO-SPB1 missions. It features Schmidt optics and has a 1-meter diameter aperture. The focal surface of the telescope is equipped with a 6912-pixel Multi Anode Photo Multipliers (MAPMT) camera covering a 37.4 x 11.4 degree Field of Regard. Such a big Field of Regard, together with a flight target duration of up to 100 days, would allow, for the first time from suborbital altitudes, detection of UHECR fluorescence tracks. This contribution will provide an overview of the instrument including the current status of the telescope development.

The fluorescence camera of the EUSO-SPB2 mission is the last and most advanced implementation of the technology developed within the JEM-EUSO (Joint Exploratory Missions for an Extreme Universe Space Observatory) collaboration to study ultra-high-energy cosmic rays (UHECRs), extensive atmospheric showers and transient luminous events from space. It consists of three photodetection modules, each hosting nine elementary cells with 36 multi-anode photomultiplier tubes (MAPMTs), for a total of 6912 pixels. The associated electronics was designed to operate in single photon counting mode. In this paper, we apply the calibration techniques presented in the accompanying paper (Paper I) to characterize the photodetectors of the EUSO-SPB2 fluorescence camera. In particular, we determine the photodetection efficiency and physical size of each pixel. We find an average efficiency of similar to 32%. We also examine its dependence with high voltage and photon wavelength, and determine the double pulse resolution of the different channels, of the order of 10 ns.

Context. Observations of meteors in the Earth's atmosphere offer a unique tool for determining the flux of meteoroids that are too small to be detected by direct telescopic observations. Although these objects are routinely observed from ground-based facilities, such as meteor and fireball networks, space-based instruments come with notable advantages and have the potential to achieve a broad and uniform exposure. Aims. In this paper, we describe the first observations of meteor events with Mini-EUSO, a very wide field-of-view telescope launched in August 2019 from the Baikonur cosmodrome and installed on board the Russian Zvezda module of the International Space Station. Mini-EUSO can map the night-time Earth in the near-UV range (290-130 nm) with a field of view equal to 44 degrees x 44 degrees and a spatial resolution of about 4.7 km at an altitude of 100 km from the ground. The detector saves triggered transient phenomena with a sampling frequency of 2.5 mu s and 320 mu s, as well as a continuous acquisition at 40.96 ms scale that is suitable for meteor observations. Methods. We designed two dedicated and complementary trigger methods, together with an analysis pipeline able to estimate the main physical parameters of the observed population of meteors, such as the duration, horizontal speed, azimuth, and absolute magnitude. To compute the absolute flux of meteors from Mini-EUSO observations, we implemented a simulation framework able to estimate the detection efficiency as a function of the meteor magnitude and the background illumination conditions. Results. The instrument detected 24 thousand meteors within the first 40 data-taking sessions from November 2019 to August 2021, for a total observation time of approximately 6 days with a limiting absolute magnitude of +6. Our estimation of the absolute flux density of meteoroids in the range of mass between 10(-5) kg to 10(-1) kg was found to be comparable to other results available in the literature. Conclusions. The results of this work prove the potential for space-based observations to increase the statistics of meteor observations achievable with instruments operating on the ground. The slope of the mass distribution of meteoroids sampled with Mini-EUSO suggests a mass index of either s = 2.09 +/- 0.02 or s = 2.31 +/- 0.03, according to two different methodologies for the computation of the pre-atmospheric mass starting from the luminosity of each event.

DNA marker-based discrimination between a wild-type specimen and mutants obtained using heavy-ion beams (because of small genomic and genetic mutations) is challenging in mutation breeding. Protecting the plant breeders' right to mutate cultivars is challenging because tissue culture techniques that use the protocorm-like body (PLB) can quickly propagate. Thus, we present two methods for generating DNA markers in Cymbidium using genomic mutations induced by heavy-ion beams. In the first method, we selected 8-16 plants from three cultivars after irradiation that had no mutations in morphology or traits, followed by genome scanning using 240 sets of 15-mer random amplified polymorphic DNA primers and arbitrarily primed PCR primers based on partial retrotransposon sequences. Three polymorphic patterns were generated in each cultivar. In the second method, cultivar candidates were generated by crossbreeding, and a strain was selected. Genome scanning was performed on 43 plants irradiated by applying a carbon- or neon-ion beam to the PLB and using five random primer sets that allowed many scorable bands. Polymorphic patterns were detected in two strains at all micropropagation steps via the PLB and in second-flowering plants. These data demonstrate that strains with the same appearance after heavy-ion beam irradiation can be distinguished using polymorphic DNA patterns alone. These patterns were defined as "DNA marks" for intracultivar identification. In cases where multiple strains of DNA marks are obtained in one cultivar, DNA marks can realize the feasibility of DNA-level traceability from production to market.

ABSTRACT A major incident occurred at the Fukushima Daiichi Nuclear Power Station following the tsunami triggered by the Tohoku–Pacific Ocean Earthquake in March 2011, whereby seawater entered the torus room in the basement of the reactor building. Here, we identify and analyze the bacterial communities in the torus room water and several environmental samples. Samples of the torus room water (1 × 10 9 Bq 137 Cs/L) were collected by the Tokyo Electric Power Company Holdings from two sampling points between 30 cm and 1 m from the bottom of the room (TW1) and the bottom layer (TW2). A structural analysis of the bacterial communities based on 16S rRNA amplicon sequencing revealed that the predominant bacterial genera in TW1 and TW2 were similar. TW1 primarily contained the genus Limnobacter , a thiosulfate-oxidizing bacterium. γ-Irradiation tests on Limnobacter thiooxidans , the most closely related phylogenetically found in TW1, indicated that its radiation resistance was similar to ordinary bacteria. TW2 predominantly contained the genus Brevirhabdus , a manganese-oxidizing bacterium. Although bacterial diversity in the torus room water was lower than seawater near Fukushima, ~70% of identified genera were associated with metal corrosion. Latent environment allocation—an analytical technique that estimates habitat distributions and co-detection analyses—revealed that the microbial communities in the torus room water originated from a distinct blend of natural marine microbial and artificial bacterial communities typical of biofilms, sludge, and wastewater. Understanding the specific bacteria linked to metal corrosion in damaged plants is important for advancing decommissioning efforts. IMPORTANCE In the context of nuclear power station decommissioning, the proliferation of microorganisms within the reactor and piping systems constitutes a formidable challenge. Therefore, the identification of microbial communities in such environments is of paramount importance. In the aftermath of the Fukushima Daiichi Nuclear Power Station accident, microbial community analysis was conducted on environmental samples collected mainly outside the site. However, analyses using samples from on-site areas, including adjacent soil and seawater, were not performed. This study represents the first comprehensive analysis of microbial communities, utilizing meta 16S amplicon sequencing, with a focus on environmental samples collected from the radioactive element-containing water in the torus room, including the surrounding environments. Some of the identified microbial genera are shared with those previously identified in spent nuclear fuel pools in countries such as France and Brazil. Moreover, our discussion in this paper elucidates the correlation of many of these bacteria with metal corrosion.

Mini-EUSO is a very wide (44°x44°) field of view telescope installed on August 2019 inside the Zvezda Module of the ISS, looking nadir through a UV transparent window and taking data since October 2019. Its optical system consists of two Fresnel lenses, focusing the light onto an array of 36 multi-anode photomultiplier tubes. The focal surface counts a total of 2304 pixels, each one having a footprint of about 6.5 km on ground. The instrument triggers on two different timescales, respectively 2.5 μs (D1) and 320 μs (D2), and perform a continuous monitoring of the UV emission at a 40.96 ms timescale (D3). At time of writing, about one thousand meteors on D3 data have been classified as meteors using our current detection algorithm. We describe here a concept of an alternative algorithm to recognize meteors in the D3 continuous data-stream, which can be also implemented in the future for online triggering, and show some examples of detected meteors by our instrument. We also performed a search of possible coincident detections of Mini-EUSO meteors by ground meteor and fireball networks, such as PRISMA in Italy, to gain a stereoscopic vision of the event itself. In light of these initial results, we present here the capabilities of Mini-EUSO instrument in meteor science.

More than three dozen submillisecond events of ELVES type (“elves”), which are the result of the interaction of the front of an electromagnetic pulse from a lightning discharge and the lower layer of the ionosphere, have been identified in the data of a UV Atmosphere orbital multichannel detector (Mini-EUSO). Each event has a characteristic annular glow pattern and occupies a significant part of the detector’s field of view, and the signal in a separate channel has an asymmetric profile with a pronounced peak. The distribution of peak times contains information about both the localization of the discharge and the altitude of the glow. In this paper, we propose a Bayesian (probabilistic) model for reconstructing ELVES events, implemented using probabilistic programming methods in PyMC-5. The capabilities of the model for determining the position of the discharge are shown using the example of several events. Methods for modifying the model to restore the discharge orientation and refine the glow height are outlined.

During its first six months of operations onboard the Zvezda module of the International Space Station, the Mini-EUSO wide-field telescope detected more than two thousand meteors in approximately 40 hours of data taking. Mini-EUSO observes the Earth’s atmosphere in the UV range (290 – 430 nm) with a field of view of about 44° x 44° through a nadir-facing, UV-transparent window with a focal surface of 48 x 48 pixels and a resolution of about 6.3 km on ground. While temporal resolution and triggering are at the timescales of 2.5 μs to potentially record UHECR showers and TLEs, Mini-EUSO performs a continuous monitoring of the UV emission at a 40.96 ms timescale, where meteors are recorded. We developed an analysis pipeline able to offline detect, track and characterize meteor events and subsequently compute their physical parameters, such as tangential speed, magnitude, duration and trajectory azimuth. In this contribution, we present the implemented reduction methods and the results of the analysis of the sample, providing comparisons with existing databases of meteors observed in the optical band.

In this article, we present cutting-edge machine learning-based techniques for the detection and reconstruction of meteors and space debris in the Mini-EUSO experiment, a detector installed on board of the International Space Station, and pointing toward the Earth. We base our approach on a recent technique, the STACKing method plus Convolutional Neural Network (STACK-CNN), originally developed as an online trigger in an orbiting remediation system to detect space debris. Our proposed method, the refined-STACKing method plus convolutional neural network (R-Stack-CNN), makes the STACKing method plus convolutional neural network (STACK-CNN) more robust, thanks to a random forest that learns the temporal development of these events in the camera. We prove the flexibility of our method by showing that it is sensitive to any space object that moves linearly in the field of view. First, we search small space debris, never observed by Mini-EUSO. Due to the limiting statistics, also in this case, no debris were found. However, since meteors produce signals similar to space debris but they are much more frequent, the R-Stack-CNN is adapted to identify such events while avoiding the numerous false positives of the Stack-CNN. Results from real data show that the R-Stack-CNN is able to find more meteors than a classical thresholding method and a new method of two neural networks. We also show that the method is also able to accurately reconstruct speed and direction of meteors with simulated data.

The complexity of modern cosmic ray observatories and the rich data sets they capture often require a sophisticated software framework to support the simulation of physical processes, detector response, as well as reconstruction and analysis of real and simulated data. Here we present the EUSO-(Off) over bar(line) under bar framework. The code base was originally developed by the Pierre Auger Collaboration, and portions of it have been adopted by other collaborations to suit their needs. We have extended this software to fulfill the requirements of Ultra-High Energy Cosmic Ray detectors and very high energy neutrino detectors developed for the Joint Exploratory Missions for an Extreme Universe Observatory (JEM-EUSO). These path-finder instruments constitute a program to chart the path to a future space-based mission like POEMMA. For completeness, we describe the overall structure of the framework developed by the Auger collaboration and continue with a description of the JEM-EUSO simulation and reconstruction capabilities. The framework is written predominantly in modern C++ (compliled against C++17) and incorporates third-party libraries chosen based on functionality and our best judgment regarding support and longevity. Modularity is a central notion in the framework design, a requirement for large collaborations in which many individuals contribute to a common code base and often want to compare different approaches to a given problem. For the same reason, the framework is designed to be highly configurable, which allows us to contend with a variety of JEM-EUSO missions and observation scenarios. We also discuss how we incorporate broad, industry-standard testing coverage which is necessary to ensure quality and maintainability of a relatively large code base, and the tools we employ to support a multitude of computing platforms and enable fast, reliable installation of external packages. Finally, we provide a few examples of simulation and reconstruction applications using EUSO-(Off) over bar(line) under bar.

The Extreme Universe Space Observatory on a Super Pressure Balloon 1 (EUSO-SPB1) was launched in 2017 April from Wanaka, New Zealand. The plan of this mission of opportunity on a NASA super pressure balloon test flight was to circle the southern hemisphere. The primary scientific goal was to make the first observations of ultra-high-energy cosmic-ray extensive air showers (EASs) by looking down on the atmosphere with an ultraviolet (UV) fluorescence telescope from suborbital altitude (33~km). After 12~days and 4~hours aloft, the flight was terminated prematurely in the Pacific Ocean. Before the flight, the instrument was tested extensively in the West Desert of Utah, USA, with UV point sources and lasers. The test results indicated that the instrument had sensitivity to EASs of approximately 3 EeV. Simulations of the telescope system, telescope on time, and realized flight trajectory predicted an observation of about 1 event assuming clear sky conditions. The effects of high clouds were estimated to reduce this value by approximately a factor of 2. A manual search and a machine-learning-based search did not find any EAS signals in these data. Here we review the EUSO-SPB1 instrument and flight and the EAS search.

EUSO-TA is a ground-based fluorescence telescope built to validate the design of ultra-high energy cosmic ray fluorescence detectors to be operated in space with the technology developed within the Joint Exploratory Missions for Extreme Universe Space Observatory (JEM-EUSO) program. It operates at the Telescope Array (TA) site in Utah, USA. With an external trigger provided by the Black Rock Mesa fluorescence detectors of the Telescope Array experiment, with EUSO-TA we observed air-showers from ultra-high energy cosmic rays, as well as laser events from the Central Laser Facility at the TA site and from portable lasers like the JEM-EUSO Global Light System prototype. Since the Black Rock Mesa fluorescence detectors have a ∼30 times larger field of view than EUSO-TA, they allow a primary energy reconstruction based on the observation of a large part of the shower evolution, including the shower maximum, while EUSO-TA observes only a part of it, usually far away from the maximum. To estimate the detection limits of EUSO-TA in energy and distance, a method was developed to re-scale their energy, taking into account that EUSO-TA observes only a portion of the air-showers. The method was applied on simulation sets with showers with different primaries, energy, direction, and impact point on the ground, as well as taking into account the experimental environment. EUSO-TA was simulated with an internal trigger and different elevation angles and electronics. The same method was then applied also to real measurements and compared to the simulations. In addition, the method can also be used to estimate the detection limits for experiments that are operated at high altitudes and in most cases can see the maximum of the showers. This was done for EUSO-SPB1, an instrument installed on a super-pressure balloon. Finally, the expected detection rates for EUSO-TA were also assessed using the prepared simulated event sets. The rates correspond to a few detections per recording session of 30 h of observation, depending on the background level and the configuration of the detector.

The important role of magnetic fields in the phenomena in and evolution of the Universe is well appreciated. A salient example of this is to make (often episodic) large magnetic fields in AGN accretion disks and their emanation of well-collimated and longitudinally extended astrophysical jets. Such typical cases or related astrophysical processes, we find, provide a fertile ground for exciting large-amplitude oscillations in the magnetic fields that constitute the spine of the jets. The energy sources of these oscillations can be traced originally to the gravitational energy of the central object. During their long propagation along the jet, because of the gradual changes of the density and magnetic fields, these large magnetic pulsations turn into relativistic amplitude electromagnetic (EM) pulses, which in turn induce intense wakefields that are capable of acceleration of electrons, positrons, and ions to high energies. In this review, we survey a variety of astrophysical objects ranging from as large as the cosmic AGN accretion disks and their jets to as small as microquasars, to find or predict that there exist common astrophysical processes of emission of high-energy particles and gamma (and other EM) emissions. A variety of these objects will be ideally observed and studied in the multimessenger astrophysical observations. One example that already stuck out was the case of the simultaneous observations of gravitational wave emission and gamma-ray pulse from the collision of the two neutron stars and their subsequent structure formation (such as a disk) around them.

The data have been acquired with the Mini-EUSO detector, an UV telescope operating in the range 290-430 nm and located inside the International Space Station. The detector was launched in August 2019, and it has started operations from the nadir-facing UV-transparent window in the Russian Zvezda module in October 2019. The data presented here refer to 32 sessions acquired between 2019-11-19 and 2021-05-06. The instrument consists of a Fresnel-lens optical system and a focal surface composed of 36 multi-anode photomultiplier tubes, each with 64 channels, for a total of 2304 channels with single photon counting sensitivity. The telescope, with a square field-of-view of 44 degrees, has a spatial resolution on the Earth surface of 6.3 km and saves triggered transient phenomena with a temporal resolution of 2.5 mu s and 320 mu s. The telescope also operates in continuous acquisition at a 40.96 ms scale. In this article, large-area night-time UV maps obtained processing the 40.96 ms data, taking averages over regions of some specific geographical areas (e.g., Europe, North America) and over the entire globe, are presented. Data are binned into 0.1 degrees x 0.1 degrees or 0.05 degrees x 0.05 degrees cells (depending on the scale of the map) over the Earth's surface. Raw data are made available in the form of tables (latitude, longitude, counts) and.kmz files (containing the.png images). These are - to the best of our knowledge - the highest sensitivity data in this wavelength range and can be of use to various disciplines. (C) 2023 The Author(s). Published by Elsevier Inc.

This is a collection of papers presented by the JEM-EUSO Collaboration at the 38th International Cosmic Ray Conference (Nagoya, Japan, July 26-August 3, 2023)

Mini-EUSO is a wide Field-of-View (FoV, 44°) telescope currently in operation from a nadir-facing UV-transparent window in the Russian Zvezda module on the International Space Station (ISS). It is the first detector of the JEM-EUSO program deployed on the ISS, launched in August 2019. The main goal of Mini-EUSO is to measure the UV emissions from the ground and atmosphere, using an orbital platform. Mini-EUSO is mainly sensitive in the 290–430 nm bandwidth. Light is focused by a system of two Fresnel lenses of 25 cm diameter each on the Photo-Detector-Module (PDM), which consists of an array of 36 Multi-Anode Photomultiplier Tubes (MAPMTs), arranged in blocks of 2 × 2 called Elementary Cells (ECs), for a total of 2304 pixels working in photon counting mode, in three different time resolutions of 2.5 µs (defined as 1 Gate Time Unit, GTU), 320 µs and 40.96 ms operating in parallel. In the longest time scale, the data is continuously acquired to monitor the UV emission of the Earth. It is best suited for the observation of ground sources and therefore has been used for the observational campaigns of the ground-based UV flasher in order to perform an end-to-end calibration of Mini-EUSO. In this contribution, the assembled UV flasher, the operation of the field campaign and the analysis of the obtained data are presented. The result is compared with the overall effi ciency computed from the expectations which takes into account the atmospheric attenuation and the parametrisation of different effects such as the optics effi ciency, the MAPMT detection effi ciency, BG3 filter transmittance and the transparency of the ISS window.

JEM-EUSO is an international program for the development of space-based Ultra-High Energy Cosmic Ray observatories. The program consists of a series of missions which are either under development or in the data analysis phase. All instruments are based on a wide-field-of-view telescope, which operates in the near-UV range, designed to detect the fluorescence light emitted by extensive air showers in the atmosphere. We describe the simulation software ESAF in the framework of the JEM-EUSO program and explain the physical assumptions used. We present here the implementation of the JEM-EUSO, POEMMA, K-EUSO, TUS, Mini-EUSO, EUSO-SPB1 and EUSO-TA configurations in ESAF. For the first time ESAF simulation outputs are compared with experimental data.