Platelets are highly reactive fragments of megakaryocytes that play a fundamental role in thrombosis and hemostasis. Predictably, all conventional anti-platelet therapies elicit bleeding, raising the question whether the thrombotic activity of platelets can be targeted separately. In this study, we describe a novel approach of inhibiting platelet activation through the use of bispecific single-chain variable fragments (bi-scFvs), termed cis-acting platelet receptor inhibitors (CAPRIs) that harness the immunoreceptor tyrosine-based inhibition motif (ITIM)-containing co-inhibitory receptor G6b-B (G6B) to suppress immunoreceptor tyrosine-based (ITAM)-containing receptor-mediated platelet activation. CAPRI-mediated hetero-clustering of G6B with either the ITAM-containing GPVI-FcR γ-chain complex or FcγRIIA (CD32A) inhibited collagen- or immune complex-induced platelet aggregation. G6B-GPVI CAPRIs strongly and specifically inhibited thrombus formation on collagen under arterial shear, whereas G6B-CD32A CAPRI strongly and specifically inhibited thrombus formation to heparin-induced thrombocytopenia, vaccine-induced thrombotic thrombocytopenia and antiphospholipid syndrome complexes on Von Willebrand Factor-coated surfaces and photochemical-injured endothelial cells under arterial shear. Our findings provide proof-of-concept that CAPRIs are highly effective at inhibiting ITAM receptor-mediated platelet activation, laying the foundation for a novel family of anti-thrombotic therapeutics with potentially improved efficacy and fewer bleeding outcomes compared with current anti-platelet therapies.

ABSTRACT Here we describe a hypothesis free approach to screen for interactions of SARS-CoV-2 spike (S) protein with human cell surface receptors. We used a library screening approach to detect binding interactions across one of the largest known panels of membrane-bound and soluble receptors, comprising 5845 targets, expressed recombinantly in human cells. We were able confirm and replicate SARS-CoV-2 binding to ACE2 and other putative coreceptors such as CD209 and CLEC4M. More significantly, we identified interactions with a number of novel SARS-CoV-2 S binding proteins. Three of these novel receptors, NID1, CNTN1 and APOA4 were specific to SARS-CoV-2, and not SARS-COV, with APOA4 binding the S-protein with equal affinity as ACE2. With this knowledge we may further understand the disease pathogenesis of COVID-19 patients and how infection by SARS-CoV-2 may lead to differences in pathology in specific organs or indeed the virulence observed in different ethnicities. Importantly we illustrate a methodology which can be used for rapid, unbiassed identification of cell surface receptors, to support drug screening and drug repurposing approaches for this and future pandemics.

Serological assays have been widely employed during the coronavirus disease 2019 (COVID-19) pandemic to measure antibody responses to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and to track seroconversion in populations. However, currently available assays do not allow determination of neutralization capacity within the assay protocol. Furthermore, commercial serology assays have a high buy-in cost that is inaccessible for many research groups. We have replicated the serological enzyme-linked immunosorbent assay for the detection of SARS-CoV-2 antibody isotypes, developed at the Icahn School of Medicine at Mount Sinai, New York. Additionally, we have modified the protocol to include a neutralization assay with only a minor modification to this protocol. We used this assay to screen local COVID-19 patient sera (n = 91) and pre-COVID-19 control sera (n = 103), and obtained approximate parity with approved commercial anti-nucleoprotein-based assays with these sera. Furthermore, data from our neutralization assay closely aligns with that generated using a spike-based pseudovirus infection model when a subset of patient sera was analyzed.

The immunoreceptor tyrosine-based inhibition motif (ITIM)-containing receptor G6b-B is critical for platelet production and activation. Loss of G6b-B results in severe macrothrombocytopenia, myelofibrosis and aberrant platelet function in mice and humans. Using a combination of immunohistochemistry, affinity chromatography and proteomics, we identified the extracellular matrix heparan sulfate (HS) proteoglycan perlecan as a G6b-B binding partner. Subsequent in vitro biochemical studies and a cell-based genetic screen demonstrated that the interaction is specifically mediated by the HS chains of perlecan. Biophysical analysis revealed that heparin forms a high-affinity complex with G6b-B and mediates dimerization. Using platelets from humans and genetically modified mice, we demonstrate that binding of G6b-B to HS and multivalent heparin inhibits platelet and megakaryocyte function by inducing downstream signaling via the tyrosine phosphatases Shp1 and Shp2. Our findings provide novel insights into how G6b-B is regulated and contribute to our understanding of the interaction of megakaryocytes and platelets with glycans.

Due in part to the needs of the biopharmaceutical industry, there has been an increased drive to generate high quality recombinant proteins in large amounts. However, achieving high yields can be a challenge as the novelty and increased complexity of new targets often makes them ‘difficult‐to‐express’. This study aimed to define the molecular features that restrict the production of a model ‘difficult‐to‐express’ recombinant protein, Tissue Inhibitor Metalloproteinase‐3 (TIMP‐3). Building from experimental data, computational approaches were used to rationalize the redesign of this recombinant target to generate a chimera with enhanced secretion. The results highlight the importance of early identification of unfavourable sequence attributes, enabling the generation of engineered protein forms that bypass ‘secretory’ bottlenecks and result in efficient recombinant protein production.

Purified recombinant proteins are key reagents in academic and industrial research. The ability to make these proteins quickly often relies on the availability of higher eukaryotic cell hosts such as insect and mammalian cells where there is a very wide range of post-translational modifications, protein folding and trafficking pathways. This enables the generation of many proteins that cannot be made in microbial hosts. In this article we outline some of the most commonly used methods to express recombinant proteins in insect and mammalian cells.

ABSTRACTCertain recombinant proteins are deemed “difficult to express” in mammalian expression systems requiring significant cell and/or process engineering to abrogate expression bottlenecks. With increasing demand for the production of recombinant proteins in mammalian cells, low protein yields can have significant consequences for industrial processes. To investigate the molecular mechanisms that restrict expression of recombinant proteins, naturally secreted model proteins were analyzed from the tissue inhibitors of metalloproteinase (TIMP) protein family. In particular, TIMP‐2 and TIMP‐3 were subjected to detailed study. TIMP proteins share significant sequence homology (∼50% identity and ∼70% similarity in amino acid sequence). However, they show marked differences in secretion in mammalian expression systems despite this extensive sequence homology. Using these two proteins as models, this study characterized the molecular mechanisms responsible for poor recombinant protein production. Our results reveal that both TIMP‐2 and TIMP‐3 are detectable at mRNA and protein level within the cell but only TIMP‐2 is secreted effectively into the extracellular medium. Analysis of protein localization and the nature of intracellular protein suggest TIMP‐3 is severely limited in its post‐translational processing. To overcome this challenge, modification of the TIMP‐3 sequence to include a furin protease‐cleavable pro‐sequence resulted in secretion of the modified TIMP‐3 protein, however, incomplete processing was observed. Based on the TIMP‐3 data, the protein engineering approach was optimized and successfully applied in combination with cell engineering, the overexpression of furin, to another member of the TIMP protein family (the poorly expressed TIMP‐4). Use of the described protein engineering strategy resulted in successful secretion of poorly (TIMP‐4) and non‐secreted (TIMP‐3) targets, and presents a novel strategy to enhance the production of “difficult” recombinant targets. Biotechnol. Bioeng. 2017;114: 2348–2359. © 2017 Wiley Periodicals, Inc.

The structure-specific nuclease human flap endonuclease-1 (hFEN1) plays a key role in DNA replication and repair and may be of interest as an oncology target. We present the crystal structure of inhibitor-bound hFEN1, which shows a cyclic N-hydroxyurea bound in the active site coordinated to two magnesium ions. Three such compounds had similar IC50 values but differed subtly in mode of action. One had comparable affinity for protein and protein-substrate complex and prevented reaction by binding to active site catalytic metal ions, blocking the necessary unpairing of substrate DNA. Other compounds were more competitive with substrate. Cellular thermal shift data showed that both inhibitor types engaged with hFEN1 in cells, and activation of the DNA damage response was evident upon treatment with inhibitors. However, cellular EC50 values were significantly higher than in vitro inhibition constants, and the implications of this for exploitation of hFEN1 as a drug target are discussed.

Transient expression of heterologous proteins in mammalian systems is a powerful way to generate protein reagents quickly. However, it has historically suffered from poor yields in comparison to methods where the recombinant gene is stably integrated into the genome and high expressing clones isolated. Transient methods have been well described for HEK-based systems. In this paper we show the use of a design of experiments (DoE) approach to quickly analyse the effect of a range of different parameters on protein expression from a CHO-based transient system. We show that this system is amenable to a very simple transfection procedure by independent direct addition of DNA and transfection reagent to the culture vessel. In addition we show that expression can be improved by reducing the temperature of the culture conditions post-transfection. The process is demonstrated to be transferrable from 3 ml cultures in deep 24-well plates through cultures in CultiFlask Bioreactors, shake flasks and up to 25 L culture in Wave Bioreactors. Data are shown to illustrate the utility of the system with a number of different classes of protein.

A number of different methods are commonly used to map the fine details of the interaction between an antigen and an antibody. Undoubtedly the method that is now most commonly used to give details at the level of individual amino acids and atoms is X‐ray crystallography. The feasibility of undertaking crystallographic studies has increased over recent years through the introduction of automation, miniaturization and high throughput processes. However, this still requires a high level of sophistication and expense and cannot be used when the antigen is not amenable to crystallization. Nuclear magnetic resonance spectroscopy offers a similar level of detail to crystallography but the technical hurdles are even higher such that it is rarely used in this context. Mutagenesis of either antigen or antibody offers the potential to give information at the amino acid level but suffers from the uncertainty of not knowing whether an effect is direct or indirect due to an effect on the folding of a protein. Other methods such as hydrogen deuterium exchange coupled to mass spectrometry and the use of short peptides coupled with ELISA‐based approaches tend to give mapping information over a peptide region rather than at the level of individual amino acids. It is quite common to use more than one method because of the limitations and even with a crystal structure it can be useful to use mutagenesis to tease apart the contribution of individual amino acids to binding affinity.

A number of different methods are commonly used to map the fine details of the interaction between an antigen and an antibody. Undoubtedly the method that is now most commonly used to give details at the level of individual amino acids and atoms is X-ray crystallography. The feasibility of undertaking crystallographic studies has increased over recent years through the introduction of automation, miniaturization and high throughput processes. However, this still requires a high level of sophistication and expense and cannot be used when the antigen is not amenable to crystallization. Nuclear magnetic resonance spectroscopy offers a similar level of detail to crystallography but the technical hurdles are even higher such that it is rarely used in this context. Mutagenesis of either antigen or antibody offers the potential to give information at the amino acid level but suffers from the uncertainty of not knowing whether an effect is direct or indirect due to an effect on the folding of a protein. Other methods such as hydrogen deuterium exchange coupled to mass spectrometry and the use of short peptides coupled with ELISA-based approaches tend to give mapping information over a peptide region rather than at the level of individual amino acids. It is quite common to use more than one method because of the limitations and even with a crystal structure it can be useful to use mutagenesis to tease apart the contribution of individual amino acids to binding affinity.

TNFα (tumour necrosis factor α) is an early mediator in the systemic inflammatory response to infection and is therefore a therapeutic target in sepsis. AZD9773 is an ovine-derived, polyclonal anti-TNFα Fab fragment derived from a pool of serum and currently being developed as a treatment for severe sepsis and septic shock. In the present study, we show that although AZD9773 has a modest affinity for TNFα in a binding assay, the Ki in a cell-based assay is approximately four orders of magnitude lower. We show using SEC (size exclusion chromatography) that the maximum size of the complex between AZD9773 and TNFα is consistent with approximately 12 Fabs binding to one TNFα trimer. A number of approaches were taken to map the epitopes recognized by AZD9773. These revealed that a number of different regions on TNFα are involved in binding to the polyclonal Fab. The data suggest that there are probably three epitopes per monomer that are responsible for most of the inhibition by AZD9773 and that all three can be occupied at the same time in the complex. We conclude that AZD9773 is clearly demonstrated to bind to multiple epitopes on TNFα and suggest that the polyclonal nature may account, at least in part, for the very high potency observed in cell-based assays.

The activity of kinases is regulated by phosphorylation on Ser, Thr or Tyr residues within the activation loop. The ability to produce these enzymes recombinantly with a specific phosphorylation status is essential in order to understand structure and function. In this paper we describe a screening approach to co-express different phosphatases together with a kinase in the baculovirus expression system. This enabled the testing of different phosphatases as well as different levels of both phosphatase and kinase by varying the multiplicity of infection (MOI) of the different baculoviruses. This approach translated well to a larger scale. An unexpected observation was that co-expression of the phosphatase could have profound effects on expression levels even of heterologous target proteins that would not be a substrate for the phosphatase. This was most apparent with lambda phosphatase, an enzyme that removes phosphorylation from Ser and Thr residues, where expression was almost completely abolished for all proteins, even at modest MOIs. The effect of lambda phosphatase was observed irrespective of whether co-expression was from two separate baculoviruses or from two genes on the same vector. The effect was shown to be due, in part at least, to a decrease in transcription.

IL-17A is a pro-inflammatory cytokine produced by the newly identified Th17 subset of T-cells. We have isolated a human monoclonal antibody to IL-17A (CAT-2200) that can potently neutralize the effects of recombinant and native human IL-17A. We determined the crystal structure of IL-17A in complex with the CAT-2200 Fab at 2.6 angstrom resolution in order to provide a definitive characterization of the epitope and paratope regions. Approximately a third of the IL-17A dimer is disordered in this crystal structure. The disorder occurs in both independent copies of the complex in the asymmetric unit and does not appear to be influenced by crystal packing. The complex contains one IL-17A dimer sandwiched between two CAT-2200 Fab fragments. The IL-17A is a disulfide-linked homodimer that is similar in structure to IL-17F, adopting a cystine-knot fold. The structure is not inconsistent with the previous prediction of a receptor binding cavity on IL-17 family members. The epitope recognized by CAT-2200 is shown to involve 12 amino acid residues from the quaternary structure of IL-17A, with each Fab contacting both monomers in the dimer. All complementarity-determining regions (CDRs) in the Fab contribute to a total of 16 amino acid residues in the antibody paratope. In vitro affinity optimization was used to generate CAT-2200 from a parental lead antibody using random mutagenesis of CDR3 loops. This resulted in seven amino acid changes (three in VL-CDR3 and four in VH-CDR3) and gave an approximate 30-fold increase in potency in a cell-based neutralization assay. Two of the seven amino acids form part of the CAT-2200 paratope. The observed interaction site between CAT-2200 and IL-17A is consistent with data from hydrogen/deuterium exchange mass spectrometry and mutagenesis approaches. (C) 2009 Elsevier Ltd. All rights reserved.

The ADAMTS (a disintegrin-like and metalloproteinase domain with thrombospondin type I motifs) family of proteases plays a role in pathological conditions including arthritis, cancer, thrombotic thrombocytopenic purpura and the Ehlers-Danlos type VIIC and Weill-Marchesani genetic syndromes. Here, we report the first crystal structures for a member of the ADAMTS family, ADAMTS-1. Originally cloned as an inflammation-associated gene, ADAMTS-1 has been shown to be involved in tissue remodelling, wound healing and angiogenesis. The crystal structures contain catalytic and disintegrin-like domains, both in the inhibitor-free form and in complex with the inhibitor marimastat. The overall fold of the catalytic domain is similar to related zinc metalloproteinases such as matrix metalloproteinases and ADAMs (a disintegrin and metalloproteinases). The active site contains the expected organisation of residues to coordinate zinc but has a much larger S1' selectivity pocket than ADAM33. The structure also unexpectedly reveals a double calcium-binding site. Also surprisingly, the previously named disintegrin-like domain showed no structural homology to the disintegrin domains of other metalloproteinases such as ADAM10 but is instead very similar in structure to the cysteine-rich domains of other metalloproteinases. Thus, this study suggests that the D (for disintegrin-like) in the nomenclature of ADAMTS enzymes is likely to be a misnomer. The ADAMTS-1 cysteine-rich domain stacks against the active site, suggesting a possible regulatory role.

The expression of proteins using recombinant baculoviruses is a mature and widely used technology. However, some aspects of the technology continue to detract from high throughput use and the basis of the final observed expression level is poorly understood. Here, we describe the design and use of a set of vectors developed around a unified cloning strategy that allow parallel expression of target proteins in the baculovirus system as N-terminal or C-terminal fusions. Using several protein kinases as tests we found that amino-terminal fusion to maltose binding protein rescued expression of the poorly expressed human kinase Cot but had only a marginal effect on expression of a well-expressed kinase IKK-2. In addition, MBP fusion proteins were found to be secreted from the expressing cell. Use of a carboxyl-terminal GFP tagging vector showed that fluorescence measurement paralleled expression level and was a convenient readout in the context of insect cell expression, an observation that was further supported with additional non-kinase targets. The expression of the target proteins using the same vectors in vitro showed that differences in expression level were wholly dependent on the environment of the expressing cell and an investigation of the time course of expression showed it could affect substantially the observed expression level for poorly but not well-expressed proteins. Our vector suite approach shows that rapid expression survey can be achieved within the baculovirus system and in addition, goes some way to identifying the underlying basis of the expression level obtained.

Transient transfection of mammalian cells with episomal vectors is a very useful method for producing high levels of recombinant proteins. Transient systems remove the need for the laborious and time-consuming process of creating stable cell lines. Here, we describe the optimisation and evaluation of a high-throughput transient expression system in HEK293-EBNA cells. The process was developed for the expression of 10 constructs simultaneously in deep-well plates and subsequent purification using 96-well plate affinity chromatography. This enabled multiple combinations of different constructs, vectors, and expression conditions to be studied in parallel.