Biotin protein ligase (BPL) catalyzes the covalent attachment of biotin onto biotin-dependent enzymes, where it functions as an essential cofactor. Eukaryotic BPLs are distinct due to the presence of a large N-terminal extension to the conserved catalytic domain and C-terminal cap. No high-resolution structures of a eukaryotic BPL have been solved; however, previous functional studies revealed the N-terminal extension interacts with the biotinylation substrate. Mass spectrometry (MS) and complementary techniques were utilized to investigate the structure of the yeast Saccharomyces cerevisiae BPL (ScBPL). Lower resolution techniques suggested holo-ScBPL had a more compact structure and sampled fewer conformational states. In addition, solution-phase and a charge state dependent gas-phase stabilization was observed. Hydrogen-deuterium exchange (HDX) MS provided experimental validation of the AlphaFold predicted structure of ScBPL, with a folded domain structurally homologous to a glutamine amidotransferase identified in the N-terminal extension, and a mostly homologous catalytic domain to that of other species' BPLs. Further HDX analyses identified localized conformational changes in the ScBPL active site and N-terminal domain that occur concomitantly with ligand binding. These data provide novel insights into the unique structure of a class III BPL and how ligands influence this structure for catalysis of protein biotinylation.
Methylenetetrahydrofolate reductase (MTHFR) is a key metabolic enzyme in colonization and virulence of Neisseria meningitidis, a causative agent of meningococcal diseases. Here, the biochemical and structural properties of MTHFR from a virulent strain of N. meningitidis serogroup B (NmMTHFR) were characterized. Unlike other orthologs, NmMTHFR functions as a unique homohexamer, composed of three homo-dimerization partners, as shown in our 2.7 Å resolution crystal structure. Six active sites were formed solely within monomers and located away from the oligomerization interfaces. Flavin adenine dinucleotide cofactor formed hydrogen bonds with conserved sidechains, positioning its isoalloxazine ring adjacent to the overlapping binding sites of nicotinamide adenine dinucleotide (NADH) coenzyme and CH2 -H4 folate substrate. NmMTHFR utilized NADH (Km = 44 μM) as an electron donor in the NAD(P)H-CH2 -H4 folate oxidoreductase assay, but not nicotinamide adenine dinucleotide phosphate (NADPH) which is the donor required in human MTHFR. In silico analysis and mutagenesis studies highlighted the significant difference in orientation of helix α7A (Phe215-Thr225) with that in the human enzyme. The extended sidechain of Met221 on helix α7A plays a role in stabilizing the folded structure of NADH in the hydrophobic box. This supports the NADH specificity by restricting the phosphate group of NADPH that causes steric clashes with Glu26. The movement of Met221 sidechain allows the CH2 -H4 folate substrate to bind. The unique topology of its NADH and CH2 -H4 folate binding pockets makes NmMTHFR a promising drug target for the development of new antimicrobial agents that may possess reduced off-target side effects.
We previously reported potent ligands and inhibitors of Mycobacterium tuberculosis dethiobiotin synthetase ( Mt DTBS), a promising target for antituberculosis drug development (Schumann et al., ACS Chem Biol. 2021, 16, 2339-2347); here the unconventional origin of the fragment compound they were derived from is described for the first time. Compound 1 (9b-hydroxy-6b,7,8,9,9a,9b-hexahydrocyclopenta[3,4]cyclobuta[1,2-c]chromen-6(6a H )-one), identified by in silico fragment screen, was subsequently shown by surface plasmon resonance to have dose-responsive binding ( K D 0.6 mM). Clear electron density was revealed in the DAPA substrate binding pocket, when 1 was soaked into Mt DTBS crystals, but the density was inconsistent with the structure of 1 . Here we show the lactone of 1 hydrolyses to carboxylic acid 2 under basic conditions, including those of the crystallography soak, with subsequent ring-opening of the component cyclobutane ring to form cyclopentylacetic acid 3 . Crystals soaked directly with authentic 3 produced electron density that matched that of crystals soaked with presumed 1 , confirming the identity of the bound ligand. The synthetic utility of fortuitously formed 3 enabled subsequent compound development into nanomolar inhibitors. Our findings represent an example of chemical modification within drug discovery assays and demonstrate the value of high-resolution structural data in the fragment hit validation process. Synopsis A molecule flagged in an in silico docking screen against Mt DTBS, was inadvertently hydrolysed in the crystal conditions used for hit validation. The resulting fragment-sized molecule bound to the DAPA substrate binding pocket of the target enzyme ( Mt DTBS) with millimolar affinity, as measured by surface plasmon resonance, but was later modified to a highly potent (nanomolar) ligand and promising lead for the development of novel tuberculosis treatments. Graphical Abstract
Mycobacterium tuberculosis dethiobiotin synthase (MtDTBS) is a crucial enzyme involved in the biosynthesis of biotin in the causative agent of tuberculosis, M. tuberculosis. Here, we report a binder of MtDTBS, cyclopentylacetic acid 2 (KD = 3.4 ± 0.4 mM), identified viain silico screening. X-ray crystallography showed that 2 binds in the 7,8-diaminopelargonic acid (DAPA) pocket of MtDTBS. Appending an acidic group to the para-position of the aromatic ring of the scaffold revealed compounds 4c and 4d as more potent binders, with KD = 19 ± 5 and 17 ± 1 μM, respectively. Further optimization identified tetrazole 7a as a particularly potent binder (KD = 57 ± 5 nM) and inhibitor (Ki = 5 ± 1 μM) of MtDTBS. Our findings highlight the first reported inhibitors of MtDTBS and serve as a platform for the further development of potent inhibitors and novel therapeutics for the treatment of tuberculosis.
The thiol‐selective fluorescent imaging agent, dibromobimane, has been repurposed to crosslink cysteine‐ and homocysteine‐containing peptides, with the resulting bimane linker acting as both a structural constraint and a fluorescent tag. Macrocyclisation was conducted on nine short peptides containing two cysteines and/or homocysteines, both on‐resin and in buffered aqueous solution, to give macrocycles ranging in size from 16 ( i , i +2) to 31 ( i , i +7) atoms. The structures were defined by CD, NMR structure calculations by using Xplor‐NIH, NMR secondary shift and J HαNH analyses to reveal helical structure in the i , i +4 ( 1 , 2 ), and i , i +3 ( 5 ) constrained peptides. Cellular‐uptake studies were conducted with three of the macrocycles. Subsequent confocal imaging revealed punctate fluorescence within the cytosol indicative of peptides trapped in endocytic vesicles. These studies demonstrate that dibromobimane is an effective tool for defining secondary structure within short peptides, whilst simultaneously introducing a fluorescent tag suitable for common cell‐based experiments.
Biotin protein ligase (BPL) is an essential enzyme in all kingdoms of life, making it a potential target for novel anti-infective agents. Whilst bacteria and archaea have simple BPL structures (class I and II), the homologues from certain eukaryotes such as mammals, insects and yeast (class III) have evolved a more complex structure with a large extension on the N-terminus of the protein in addition to the conserved catalytic domain. The absence of atomic resolution structures of any class III BPL hinders structural and functional analysis of these enzymes. Here, two new class III BPLs from agriculturally important moulds Botrytis cinerea and Zymoseptoria tritici were characterised alongside the homologue from the prototypical yeast Saccharomyces cerevisiae. Circular dichroism and ion mobility-mass spectrometry analysis revealed conservation of the overall tertiary and secondary structures of all three BPLs, corresponding with the high sequence similarity. Subtle structural differences were implied by the different thermal stabilities of the enzymes and their varied Michaelis constants for their interactions with ligands biotin, MgATP, and biotin-accepting substrates from different species. The three BPLs displayed different preferences for fungal versus bacterial protein substrates, providing further evidence that class III BPLs have a ‘substrate validation’ activity for selecting only appropriate proteins for biotinylation. Selective, potent inhibition of these three BPLs was demonstrated despite sequence and structural homology. This highlights the potential for targeting BPL for novel, selective antifungal therapies against B. cinerea, Z. tritici and other fungal species.
Amyloid beta peptide (Aβ42) aggregation in the brain is thought to be responsible for the onset of Alzheimer's disease, an insidious condition without an effective treatment or cure. Hence, a strategy to prevent aggregation and subsequent toxicity is crucial. Bio-inspired peptide-based molecules are ideal candidates for the inhibition of Aβ42 aggregation, and are currently deemed to be a promising option for drug design. In this study, a hexapeptide containing a self-recognition component unique to Aβ42 was designed to mimic the β-strand hydrophobic core region of the Aβ peptide. The peptide is comprised exclusively of D-amino acids to enhance specificity towards Aβ42, in conjunction with a C-terminal disruption element to block the recruitment of Aβ42 monomers on to fibrils. The peptide was rationally designed to exploit the synergy between the recognition and disruption components, and incorporates features such as hydrophobicity, β-sheet propensity, and charge, that all play a critical role in the aggregation process. Fluorescence assays, native ion-mobility mass spectrometry (IM-MS) and cell viability assays were used to demonstrate that the peptide interacts with Aβ42 monomers and oligomers with high specificity, leading to almost complete inhibition of fibril formation, with essentially no cytotoxic effects. These data define the peptide-based inhibitor as a potentially potent anti-amyloid drug candidate for this hitherto incurable disease.
The penultimate step in the biosynthesis of biotin is the closure of the ureido heterocycle in a reaction requiring a nucleoside triphosphate (NTP). In Mycobacterium tuberculosis this reaction is catalyzed by dethiobiotin synthetase (MtDTBS). MtDTBS is unusual as it can employ multiple (NTPs), with a >100-fold preference for cytidine triphosphate (CTP). Here the molecular basis of NTP binding was investigated using a surface plasmon resonance based ligand binding assay and X-ray crystallography. The biophysical and structural data revealed two discrete mechanisms by which MtDTBS binds NTPs: (i) A high affinity binding mode employed by CTP (K-D 160 nM) that is characterized by a slow dissociation rate between enzyme and ligand (k(d) 5.3 X 10(-2) s(-1)) and that is defined by an extended network of specific ligand protein interactions involving both the cytidine and triphosphate moieties and (ii) a low affinity mode employed by the remaining NTPs (K-D > 16.5 mu M), that is characterized by weak interactions between protein and ligand. Previously intractable structures of MtDTBS in complex with ATP, GTP, UTP, and ITP were obtained to define the molecular basis of the low affinity ligand binding. Anchoring of the triphosphate moiety into the phosphate binding loop of MtDTBS allows the promiscuous utilization of multiple NTPs. Both high and low binding mechanisms showed conserved hydrogen bonding interactions involving the beta-phosphate of NTPs and a high-affinity anion binding site within the phosphate binding loop. This study provides insights into enzymes that can likewise utilize multiple NTPs.
Neuronal nitric oxide synthase (nNOS) is an enzyme responsible for catalyzing the production of the crucial cellular signalling molecule, nitric oxide (NO), through its interaction with the PDZ domain of α-syntrophin protein. In this study, a novel light-driven photoswitchable peptide-based biosensor, modelled on the nNOS β-finger, is used to detect and control its interaction with α-syntrophin. An azobenzene photoswitch incorporated into the peptide backbone allows reversible switching between a trans photostationary state devoid of secondary structure, and a cis photostationary state possessing a well-defined antiparallel β-strand geometry, as revealed by molecular modelling. Electrochemical impedance spectroscopy (EIS) is used to successfully detect the interaction between the gold electrode bound peptide in its cis photostationary state and a wide range of concentrations of α-syntrophin protein, highlighting both the qualitative and quantitative properties of the sensor. Furthermore, EIS demonstrates that the probe in its random trans photostationary state does not bind to the target protein. The effectiveness of the biosensor is further endorsed by the high thermal stability of the photostationary state of the cis-isomer, and the ability to actively control biomolecular interactions using light. This approach allows detection and control of binding to yield a regenerable on-off biosensor.
The human sliding clamp (PCNA) controls access to DNA for many proteins involved in DNA replication and repair. Proteins are recruited to the PCNA surface by means of a short, conserved peptide motif known as the PCNA-interacting protein box (PIP-box). Inhibitors of these essential protein-protein interactions may be useful as cancer therapeutics by disrupting DNA replication and repair in these highly proliferative cells. PIP-box peptide mimetics have been identified as a potentially rapid route to potent PCNA inhibitors. Here we describe the rational design and synthesis of the first PCNA peptidomimetic ligands, based on the high affinity PIP-box sequence from the natural PCNA inhibitor p21. These mimetics incorporate covalent i,i+4 side-chain/side-chain lactam linkages of different lengths, designed to constrain the peptides into the 310 -helical structure required for PCNA binding. NMR studies confirmed that while the unmodified p21 peptide had little defined structure in solution, mimetic ACR2 pre-organized into 310 -helical structure prior to interaction with PCNA. ACR2 displayed higher affinity binding than most known PIP-box peptides, and retains the native PCNA binding mode, as observed in the co-crystal structure of ACR2 bound to PCNA. This study offers a promising new strategy for PCNA inhibitor design for use as anti-cancer therapeutics.
Dethiobiotin synthetase from Mycobacterium tuberculosis (MtDTBS) is a promising antituberculosis drug target. Small-molecule inhibitors that target MtDTBS provide a route towards new therapeutics for the treatment of antibiotic-resistant tuberculosis. Adenosine diphosphate (ADP) is an inhibitor of MtDTBS; however, structural studies into its mechanism of inhibition have been unsuccessful owing to competitive binding to the enzyme by crystallographic precipitants such as citrate and sulfate. Here, a crystallographic technique termed precipitant-ligand exchange has been developed to exchange protein-bound precipitants with ligands of interest. Proof of concept for the exchange method was demonstrated using cytidine triphosphate (CTP), which adopted the same binding mechanism as that obtained with traditional crystal-soaking techniques. Precipitant-ligand exchange also yielded the previously intractable structure of MtDTBS in complex with ADP solved to 2.4 Å resolution. This result demonstrates the utility of precipitant-ligand exchange, which may be widely applicable to protein crystallography.
Protein biotinylation is a key post-translational modification found throughout the living world. The covalent attachment of a biotin cofactor onto specific metabolic enzymes is essential for their activity. This modification is distinctive, in that it is carried out by a single enzyme: biotin protein ligase (BPL), an enzyme that is able to biotinylate multiple target substrates without aberrant-off target biotinylation. BPL achieves this target selectivity by recognizing a sequence motif in the context of a highly conserved tertiary structure. One structural class of BPLs has developed an additional 'substrate verification' mechanism to further enable appropriate protein selection. This is crucial for the precise and selective biotinylation required for efficient biotin management, especially in organisms that are auxotrophic for biotin.
The fungal pathogen Aspergillus fumigatus has been implicated in a drastic increase in life-threatening infections over the past decade. However, compared to other microbial pathogens, little is known about the essential molecular processes of this organism. One such fundamental process is DNA replication. The protein responsible for ensuring processive DNA replication is PCNA (proliferating cell nuclear antigen, also known as the sliding clamp), which clamps the replicative polymerase to DNA. Here we present the first crystal structure of a sliding clamp from a pathogenic fungus (A. fumigatus), at 2.6 angstrom. Surprisingly, the structure bears more similarity to the human sliding clamp than other available fungal sliding clamps. Reflecting this, fluorescence polarization experiments demonstrated that AfumPCNA interacts with the PCNA-interacting protein (PIP-box) motif of human p21 with an affinity (K-d) of 3.1 mu M. Molecular dynamics simulations were carried out to better understand how AfumPCNA interacts with human p21. These simulations revealed that the PIP-box bound to AfuPCNA forms a secondary structure similar to that observed in the human complex, with a central 3(10) helix contacting the hydrophobic surface pocket of AfumPCNA as well as a beta-strand that forms an antiparallel sheet with the AfumPCNA surface. Differences in the 3(10) helix interaction with PCNA, attributed to residue Thr131 of AfumPCNA, and a less stable b-strand formation, attributed to residues Gln123 and His125 of AfumPCNA, are likely causes of the over 10-fold lower affinity of the p21 PIP-box for AfumPCNA as compared to hPCNA.
Thiazolidinedione (TZD) compounds targeting the nuclear receptor peroxisome proliferator-activated receptor gamma (PPARγ) demonstrate unique benefits for the treatment of insulin resistance and type II diabetes. TZDs include rosiglitazone, pioglitazone and rivoglitazone, with the latter being the most potent. The TZDs are only marginally selective for the therapeutic target PPARγ as they also activate PPARα and PPARδ homologues to varying degrees, causing off-target effects. While crystal structures for TZD compounds in complex with PPARγ are available, minimal structural information is available for TZDs bound to PPARα and PPARδ. This paucity of structural information has hampered the determination of precise structural mechanisms involved in TZD selectivity between PPARs. To help address these questions molecular dynamic simulations were performed of rosiglitazone, pioglitazone and rivoglitazone in complex with PPARα, PPARδ, and PPARγ in order to better understand the mechanisms of PPAR selectivity. The simulations revealed that TZD interactions with residues Tyr314 and Phe318 of PPARα and residues Phe291 and Thr253 of PPARδ as well as the omega loop, are key determinants of TZD receptor selectivity. Notably, in this study, we solve the first X-ray crystal structure of rivoglitazone bound to any PPAR. Rivoglitazone forms a unique hydrogen bond network with the residues of the PPARγ co-activator binding surface (known as AF2) and makes more extensive contacts with helix 3 and the β-sheet as compared to model TZD compounds such as rosiglitazone.
耐药菌的出现对全球公共卫生构成了巨大的挑战,结核分枝杆菌(TB)是结核病的病原菌,是临床上最重要的病原体之一.新抗生素的研发用以治疗耐药性结核病已成为临床及公共卫生管理亟待解决的重要问题.生物素(维生素B7)在结核杆菌的代谢途径如脂肪酸合成和三羧酸循环中发挥重要作用,通过生物素蛋白连接酶连接活性辅助因子而被激活.生物素蛋白连接酶及其相关生物合成通路是微生物合成生物素过程中必不可或缺的关键分子,因而有可能成为新的药物靶点.遗传研究表明,结核杆菌需要由菌体进行生物素的全程合成,因此,生物素合成酶在在结核杆菌代谢过程中起着至关重要的作用,引起了抗结核药物研究者的高度重视.本文论述了结核杆菌生物素合成通路,并重点分析了生物素合成过程中可能成为药物靶点的关键酶,旨在为结核病的治疗提供新思路,具有重要的临床意义.
Constrained α-helical peptides are showing potential as biological probes and therapeutic agents that target protein-protein interactions. However, the factors that determine the optimal constraint locations are still largely unknown. Using the β-integrin/talin protein interaction as a model system, we examine the effect of constraint location on helical conformation, as well as binding affinity, using circular dichroism and NMR spectroscopy. Stapling increased the overall helical content of each integrin-based peptide tested. However, NMR analysis revealed that different regions within the peptide are stabilised, depending on constraint location, and that these differences correlate with the changes observed in talin binding mode and affinity. In addition, we show that examination of the atomic structure of the parent peptide provides insight into the appropriate placement of helical constraints.
Dethiobiotin synthetase (DTBS) plays a crucial role in biotin biosynthesis in microorganisms, fungi, and plants. Due to its importance in bacterial pathogenesis, and the absence of a human homologue, DTBS is a promising target for the development of new antibacterials desperately needed to combat antibiotic resistance. Here we report the first X-ray structure of DTBS from Mycobacterium tuberculosis (MtDTBS) bound to a nucleotide triphosphate (CTP). The nucleoside base is stabilized in its pocket through hydrogen-bonding interactions with the protein backbone, rather than amino acid side chains. This resulted in the unexpected finding that MtDTBS could utilise ATP, CTP, GTP, ITP, TTP, or UTP with similar Km and kcat values, although the enzyme had the highest affinity for CTP in competitive binding and surface plasmon resonance assays. This is in contrast to other DTBS homologues that preferentially bind ATP primarily through hydrogen-bonds between the purine base and the carboxamide side chain of a key asparagine. Mutational analysis performed alongside in silico experiments revealed a gate-keeper role for Asn175 in Escherichia coli DTBS that excludes binding of other nucleotide triphosphates. Here we provide evidence to show that MtDTBS has a broad nucleotide specificity due to the absence of the gate-keeper residue.