The lack of tumor targeting ability and the ineffectiveness of single treatment modalities are two obstacles in the treatment of hepatocellular carcinoma (HCC). Herein, mesoporous silica nanoparticles (MSNs) with different sizes (MSN100 and MSN50) were synthesized and functionalized with polydopamine (PDA), hypericin B (HB), and arginine-glycine-aspartic acid (RGD) peptides for combined photothermal therapy (PTT) and photodynamic therapy (PDT) of HCC targeting αvβ3 integrin. MSN@PDA-RGD-HB were characterized by various techniques and showed selective drug release, high photothermal conversion efficiency, and reactive oxygen species (ROS) generation under laser irradiation. MSN100@PDA-RGD-HB exhibited higher cellular uptake and HCC toxicity than MSN50@PDA-RGD-HB in vitro, and specifically targeted HCC cells over normal cells. MSN100@PDA-RGD-HB demonstrated high biocompatibility in vivo, as confirmed by the hemolytic test and H&E staining. Importantly, MSN100@PDA-RGD-HB achieved a synergistic effect of PTT and PDT for HCC treatment in mice xenograft tumor model. Therefore, MSN100@PDA-RGD-HB has great potential for tumor therapy in the future.

This work aimed to develop a multiphasic Janus particle system for programmed drug delivery. A phase separation based one-step microfluidic preparation process was demonstrated to generate triple-phase Janus microparticles with different degradation properties in each phase. In this system, particles with a series of complicated structures were generated, and programmed degradation behaviors according to the structures were achieved. Partial degradation of the particles and cargo release triggered by change of ambient temperature or pH could be realized as well. Further, graphene nanosheets and silica nanospheres were modified in the microparticles by using the principle of Pickering emulsion to enrich the functions of the particles. To reveal the potential of the particles in drug delivery applications, doxorubicin and curcumin were co-loaded in triple-phase microparticles, and zonal drug loading was achieved. In vitro drug release profiles and tumor cell apoptosis study indicated that the particles provided programmed release behavior as well as enhanced tumor inhibition efficacy compared with free drug administration and monophasic particles. This study proposed a facile and one-step fabrication method of multiphasic particles possessing programmed and triggered drug release kinetics, and may be the first attempt to generate triple-phase particles with phase separation method in a droplet microfluidic chip.

Bone defects have caused immense healthcare concerns and economic burdens throughout the world. Traditional autologous allogeneic bone grafts have many drawbacks, so the emergence of bone tissue engineering brings new hope. Bone tissue engineering is an interdisciplinary biomedical engineering method that involves scaffold materials, seed cells, and "growth factors". However, the traditional construction approach is not flexible and is unable to adapt to the specific shape of the defect, causing the cells inside the bone to be unable to receive adequate nourishment. Therefore, a simple but effective solution using the "bottom-up" method is proposed. Microspheres are structures with diameters ranging from 1 to 1000 µm that can be used as supports for cell growth, either in the form of a scaffold or in the form of a drug delivery system. Herein, we address a variety of strategies for the production of microspheres, the classification of raw materials, and drug loading, as well as analyze new strategies for the use of microspheres in bone tissue engineering. We also consider new perspectives and possible directions for future development.

The construction of tumor model plays a crucial role in preclinical drug evaluation. However, traditional two-dimensional (2D) monolayer cell models are unable to accurately predict drug activity in vivo, and animal models have species differences and ethical issues. Herein, a droplet-based 3D bioprinting strategy is established to construct lung cancer organoid arrays for drug evaluation. The bioink system is based on sodium alginate (SA, used to crosslink with Ca2+), hyaluronic acid (HA, used to improve gel viscoelasticity and printability), and arginine-glycine-aspartic acid peptide (RGD, used to improve cell adhesion). Hundreds of organoids with 3D multicellular spherical structures are produced in batches after post-printing culture. Compared with 2D monolayer culture models, 3D organoids show higher cell activity and functional expression of P-CK, ProSP-C, MUC1 and Caveolin-1, as well as higher anticancer drug resistance and IC50. This strategy will provide in-sights into the field of organoid modeling, high-throughput and personalized drug screening.

Chronic obstructive pulmonary disease (COPD) is a heterogeneous and complex progressive inflammatory disease. Necroptosis is a newly identified type of programmed cell death. However, the role of necroptosis in COPD is unclear. This study aimed to identify necroptosis-related genes in COPD and explore the roles of necroptosis and immune infiltration through bioinformatics. The analysis identified 49 differentially expressed necroptosis-related genes that were primarily engaged in inflammatory immune response pathways. The infiltration of CD8+ T cells and M2 macrophages in COPD lung tissue was relatively reduced, whereas that of M0 macrophages was increased. We identified 10 necroptosis-related hub genes significantly associated with infiltrated immune cells. Furthermore, 7 hub genes, CASP8, IL1B, RIPK1, MLKL, XIAP, TNFRSF1A, and CFLAR, were validated using an external dataset and experimental mice. CFLAR was considered to have the best COPD-diagnosing capability. TF and miRNA interactions with common hub genes were identified. Several related potentially therapeutic molecules for COPD were also identified. The present findings suggest that necroptosis occurs in COPD pathogenesis and is correlated with immune cell infiltration, which indicates that necroptosis may participate in the development of COPD by interacting with the immune response.

Background: Inducing mesenchymal stem cells (MSCs) osteogenesis may be beneficial in a number of clinical applications. The aim of this study is to identify key novel biomarkers of this process and to analyze the possible regulatory effects on inflammation and immunity. Results: Seven datasets (GSE159137, GSE159138, GSE114117, GSE88865, GSE153829, GSE63754, GSE73087) were obtained from the Gene Expression Omnibus database and were assigned to either the training or the validation dataset. The least absolute shrinkage and selection operator (LASSO) logistic regression model was applied to the training data to select biomarkers of osteogenesis, which were then confirmed using the validation dataset. FK506 binding protein 5 (FKBP5), insulin-like growth factor binding protein (IGFBP2), prostaglandin E receptor 2 (PTGER2), SAM domain and HD domain-containing protein 1 (SAMHD1), and transmembrane tetratricopeptide 1 (TMTC1) were highlighted as potential biomarkers. In addition, the differential expressions of immunity and inflammation-related genes were examined and their correlations with the five identified biomarkers were analyzed. The results from performing RT-qPCR and Western blots confirmed that the levels of each of these biomarkers were all significantly increased following osteogenic differentiation of MSCs. Conclusions: Our results identify five biomarkers related to MSCs osteogenesis and allow us to identify their potential roles in immunoregulation and inflammation. Each biomarker was verified by in vitro experiments.

Background: The purpose of our research was to establish a gene signature and determine the prognostic value of m6A methylation regulators in cutaneous melanoma and WTAP as a protective gene in cutaneous melanoma prognosis, we also evaluated gene mutations in cutaneous melanoma. Methods: We downloaded the RNA-seq transcriptome data and the clinical information for cutaneous melanoma patients from the GTEx and TCGA databases. Consensus clustering analysis was applied to divide the samples into two groups. Then the least absolute shrinkage and selection operator (LASSO) analyses were conducted to construct a risk signature, and we use external and internal datasets to verify its predictive value. We further searched the cBioPortal tools to detect genomic alterations and WTAP mutations. Finally, WTAP was further identified as a prognostic factor, and the related mechanisms mediated by WTAP were predicted by gene set enrichment analysis (GSEA). Experimental validations and have been further carried out. Results: Notably, m6A RNA methylation regulators play significant roles in tumorigenesis and development. In total, we selected three subtypes of cutaneous melanoma according to consensus clustering of the m6A RNA methylation regulators, and the stage of cutaneous melanoma was proven to be related to the subtypes. The Cox regression and LASSO analyses built a risk signature including ELF3, ZC3H13 and WTAP. The prognostic value of the risk signature in internal and external datasets have been proven then. The whole-genome and selected gene WTAP mutations were further explored. WTAP as a single prognostic factor was also explored and found to serve as an independent protective prognostic factor. Conclusions: Our study constructed a stable risk signature composed of m6A RNA methylation regulators in cutaneous melanoma. Moreover, WTAP was identified as a valuable prognostic factor and potential molecular target for cutaneous melanoma treatment.

Based on the phase separation phenomenon in micro-droplets, polymer-lipid Janus particles were prepared on a microfluidic flow focusing chip. Phase separation of droplets was caused by solvent volatilization and Janus morphology was formed under the action of interfacial tension. Because phase change from solid to liquid of the lipid hemisphere could be triggered by physiological temperature, the lipid hemisphere could be used for rapid release of drugs. While the polymer we selected was pH sensitive that the polymer hemisphere could degrade under acidic conditions, making it possible to release drugs in a specific pH environment, such as tumor tissues. Janus particles with different structures were obtained by changing the experimental conditions. To widen the application range of the particles, fatty alcohol and fatty acid-based phase change materials were also employed to prepare the particles, such as 1-tetradecanol, 1-hexadecanol and lauric acid. The melting points of these substances are higher than the physiological temperature, which can be applied in fever triggered drug release or in thermotherapy. The introduction of poly (lactic-co-glycolic acid) enabled the formation of multicompartment particles with three distinct materials. With different degradation properties of each compartment, the particles generated in this work may find applications in programmed and sequential drug release triggered by multiple stimuli.

Due to traffic accidents, injuries, burns, congenital malformations and other reasons, a large number of patients with tissue or organ defects need urgent treatment every year. The shortage of donors, graft rejection and other problems cause a deficient supply for organ and tissue replacement, repair and regeneration of patients, so regenerative medicine came into being. Stem cell therapy plays an important role in the field of regenerative medicine, but it is difficult to fill large tissue defects by injection alone. The scientists combine three-dimensional (3D) printed bone tissue engineering scaffolds with stem cells to achieve the desired effect. These scaffolds can mimic the extracellular matrix (ECM), bone and cartilage, and eventually form functional tissues or organs by providing structural support and promoting attachment, proliferation and differentiation. This paper mainly discussed the applications of 3D printed bone tissue engineering scaffolds in stem cell regenerative medicine. The application examples of different 3D printing technologies and different raw materials are introduced and compared. Then we discuss the superiority of 3D printing technology over traditional methods, put forward some problems and limitations, and look forward to the future.

Background Patients with locally advanced rectal cancer (LARC) are at higher risk of local and distant recurrence and are thus more vulnerable to metastatic diseases. Neoadjuvant chemoradiotherapy (nCRT) and subsequent curative resection with total mesorectal excision (TME) followed by adjuvant chemotherapy have been recommended by the National Comprehensive Cancer Network (NCCN) guidelines as standard of care for LARC patients. However, the efficacy of the addition of epidermal growth factor receptor (EGFR) inhibitors in kirsten rat sarcoma viral oncogene (KRAS)-wild type LARC patients remains uncertain. Materials PubMed, Embase, and Web of Science were searched to retrieve records on the application of EGFR inhibitors in a neoadjuvant setting for LARC patients. pCR was used as surrogate endpoint to perform data synthesis in a single-arm setting. Results Ten cohorts covering 540 subjects were eligible in this systematic review. The pooled pCR rate for EGFR inhibitors was 15% (95% confidence interval (95% CI), 11-20%; I-2= 55.2%); the pooled estimates of Grade 3/4 diarrhea, Grade 3/4 hand-foot syndrome, Grade 3/4 acneiform rash were 17% (95% CI, 4-34%; I-2= 93.3%), 2% (95% CI, 0-5%; I-2= 13.7%), and 15% (95% CI, 9-22%; I-2= 65.4%), respectively. Conclusion The addition of EGFR inhibitors in the nCRT for KRAS-wild type LARC patients provides comparable efficacy and acceptable safety. However, the results should be interpreted cautiously due to the small amount of relevant data and need further confirmation by more future studies.