Video generation is rapidly evolving from single-shot synthesis to complex multi-shot audio-video (MSAV) narratives to meet real-world demands. However, evaluating such frontier models remains a fundamental challenge. Existing benchmarks are limited in scope and data diversity, and rely on rigid evaluation pipelines, preventing systematic and reliable assessment of modern MSAV models. To bridge these gaps, we introduce MSAVBench, the first comprehensive benchmark and adaptive hybrid evaluation framework for multi-shot audio-video generation. Our benchmark spans four key dimensions, video, audio, shot, and reference, covering diverse task settings, varying shot counts of up to 15, and challenging non-realistic scenarios. Our evaluation framework improves robustness through an adaptive self-correction mechanism for shot segmentation, instance-wise rubrics for subjective metrics, and tool-grounded evidence extraction for complex judgments. Furthermore, MSAVBench achieves high alignment with human judgments, reaching a Spearman rank correlation of 91.5

Compact token sequences are essential for efficient 3D generation. However, existing 3D tokenizers typically organize latent representations either over spatial regions or as fixed-size sets of global tokens, both suffering sharp reconstruction degradation when compressed to extremely low token budgets. In this paper, we present ZipTok3D, a 3D tokenizer designed for high-fidelity reconstruction from extremely short token sequences. Its key idea is to organize object geometry into progressively informative global-token prefixes and unfold these compact representations through iterative decoding. Specifically, nested dropout randomly truncates the latent sequence after encoding during training and requires each retained prefix to reconstruct the complete object, thereby prioritizing essential geometric information in the leading tokens. The decoder then repeatedly applies a parameter-shared Transformer block to recover fine-grained geometry from each prefix without a separate generative sampling stage. With the same token dimension, ZipTok3D achieves reconstruction quality comparable to the 32-token COD-VAE baseline using only one token on ShapeNet and four on TRELLIS, yielding 32× and 8× shorter token sequences, respectively.

Existing sparse attention methods primarily target inference-time acceleration by selecting critical tokens under predefined sparsity patterns. However, they often fail to bridge the training–inference gap and lack the capacity for fine-grained token selection across multiple dimensions—such as queries, key-values (KV), and heads—leading to suboptimal performance and acceleration gains. In this paper, we introduce OmniSparse, a training-aware fine-grained sparse attention of long-video MLLMs, which is applied in both training and inference with dynamic token budget allocation. Specifically, OmniSparse contains three adaptive and complementary mechanisms: (1) query selection as lazy-active classification, aiming to retain active queries that capture broader semantic similarity, while discarding most of lazy ones that focus on limited local context and exhibit high functional redundancy with their neighbors, (2) KV selection with head-level dynamic budget allocation, where a shared budget is determined based on the flattest head and applied uniformly across all heads to ensure attention recall after selection, and (3) KV cache slimming to alleviate head-level redundancy, which selectively fetches visual KV cache according to the head-level decoding query pattern. Experimental results demonstrate that OmniSparse can achieve comparable performance with full attention, achieving 2.7x speedup during prefill and 2.4x memory reduction for decoding.

While text-to-3D generation has advanced rapidly, achieving high geometric fidelity at low inference cost remains challenging. Existing text-to-3D methods either decode discrete shape tokens autoregressively or iteratively refine global 3D representations with diffusion or flow models. However, autoregressive decoding is sequential and cannot revise errors, whereas diffusion and flow-matching models repeatedly process the full representation, making high-quality generation increasingly expensive. In this paper, we propose Block3D, a block-wise diffusion framework that partitions the discrete shape-token sequence into contiguous blocks, generates the blocks autoregressively, and jointly denoises all tokens within the current block. To alleviate error accumulation, we introduce confidence-guided intra-block correction, which revises low-confidence tokens before each block is finalized. On a held-out set from TRELLIS-500K, Block3D reduces mean end-to-end generation time from 25.71 seconds to 4.99 seconds, achieving a 5.15× speedup over the fine-tuned autoregressive baseline without sacrificing geometric fidelity.

Recent video foundation models demonstrate impressive visual synthesis but frequently suffer from geometric inconsistencies. While existing methods attempt to inject 3D priors via architectural modifications, they often incur high computational costs and limit scalability. We propose World-R1, a framework that aligns video generation with 3D constraints through reinforcement learning. To facilitate this alignment, we introduce a specialized pure text dataset tailored for world simulation. Utilizing Flow-GRPO, we optimize the model using feedback from pre-trained 3D foundation models and vision-language models to enforce structural coherence without altering the underlying architecture. We further employ a periodic decoupled training strategy to balance rigid geometric consistency with dynamic scene fluidity. Extensive evaluations reveal that our approach significantly enhances 3D consistency while preserving the original visual quality of the foundation model, effectively bridging the gap between video generation and scalable world simulation.

Video world models that maintain 3D spatial consistency across generated frames typically rely on explicit point cloud memory constructed in RGB space. This design is both computationally expensive, requiring repeated rendering and VAE encoding, and inherently lossy, as the round trip through pixel space discards rich features of the learned latent representation. In this paper, we introduce latent spatial memory for video world models, a persistent 3D cache that stores scene information directly in the diffusion latent space, avoiding pixel-space reconstruction. Building on this, we propose Mirage, a latent-space spatial memory framework that constructs the memory by lifting latent tokens into 3D via depth-guided back-projection and queries it by synthesizing novel views through direct latent-space warping. This unified formulation eliminates both the information loss of pixel-space reconstruction and the computational burden of repeated encoding and rendering. Experiments show that latent spatial memory achieves up to 10.57× faster end-to-end video generation and 55× reduction in memory footprint relative to explicit 3D baselines. Leveraging the geometric prior of the diffusion model, Mirage attains state-of-the-art performance on WorldScore and strong reconstruction quality on RealEstate10K.

Recent advancements in Vision-Language Models (VLMs) have significantly pushed the boundaries of Visual Question Answering (VQA).However,high-resolution details can sometimes become noise that leads to hallucinations or reasoning errors. In this paper,we propose Degradation-Driven Prompting (DDP), a novel framework that improves VQA performance by strategically reducing image fidelity to force models to focus on essential structural information. We evaluate DDP across two distinct tasks. Physical attributes targets images prone to human misjudgment, where DDP employs a combination of 80p downsampling, structural visual aids (white background masks and orthometric lines), and In-Context Learning (ICL) to calibrate the model's focus. Perceptual phenomena addresses various machine-susceptible visual anomalies and illusions, including Visual Anomaly (VA), Color (CI), Motion(MI),Gestalt (GI), Geometric (GSI), and Visual Illusions (VI).For this task, DDP integrates a task-classification stage with specialized tools such as blur masks and contrast enhancement alongside downsampling. Our experimental results demonstrate that less is more: by intentionally degrading visual inputs and providing targeted structural prompts, DDP enables VLMs to bypass distracting textures and achieve superior reasoning accuracy on challenging visual benchmarks.

Large-scale autoregressive models have demonstrated remarkable capabilities in image generation. However, their sequential raster-scan decoding relies on strictly next-token prediction, making inference prohibitively expensive. Existing acceleration methods typically either introduce entirely new generation paradigms that necessitate costly pre-training from scratch, or enable parallel generation at the expense of a training-inference gap or altered prediction objectives. In this paper, we introduce FlashAR, a lightweight post-training adaptation framework that efficiently adapts a pre-trained raster-scan autoregressive model into a highly parallel generator based on two-way next-token prediction. Our key insight is that effective adaptation should minimize modifications to the pre-trained model's original training objective to preserve its learned prior. Accordingly, we retain the original AR head as a horizontal head for row-wise prediction and introduce a complementary, lightweight vertical head for column-wise prediction. To facilitate efficient adaptation, we branch the vertical head from an intermediate layer rather than the final layer, bypassing the inherent horizontal head bias. Moreover, since horizontal and vertical predictions capture complementary dependencies whose relative importance varies across target positions, we employ a learnable fusion gate to dynamically combine the two predictions at each position. To further reduce adaptation cost, we propose a two-stage adaptation pipeline: the vertical head is first initialized through adaptation from the pre-trained autoregressive model before jointly fine-tuned with backbone to adapt to the new decoding paradigm. Extensive experiments on LlamaGen and Emu3.5 show that FlashAR achieves up to a 22.9x speedup for 512x512 image generation through a lightweight post-training with merely 0.05

Despite rapid advances in photorealistic video generation, real-world applications such as filmmaking require video aesthetics, e.g., harmonious colors and cinematic lighting, beyond visual fidelity. Prior work on visual aesthetics largely focuses on images, often reducing aesthetics to coarse definitions, e.g., visual pleasure, without a rigorous and systematic evaluation. To improve video aesthetics, we propose a hierarchical rubric that decomposes video aesthetics into three core dimensions, Visual Aesthetics (VA), Visual Fidelity (VF), and Visual Plausibility (VP), with 15 fine-grained criteria, e.g., shot composition. This framework enables a large-scale expert-annotated preference dataset and an evaluation benchmark, AesVideo-Bench, containing about 2500 video pairs with expert annotations on VA, VF, and VP. We then build a family of Video Aesthetic Reward Models (AesRM): AesRM-Base, which directly predicts pairwise preferences on these dimensions to provide efficient post-training rewards, and AesRM-CoT, which additionally generates CoT aligned with all 15 criteria to improve assessment interpretability. Specifically, we train AesRM with a three-stage progressive scheme: (1) Atomic Aesthetic Capability Learning, which strengthens AesRM's recognition of fundamental aesthetic concepts, e.g., accurately identifying centered composition; (2) Cold-Start, aligning the model with structured reasoning protocols; and (3) GRPO, further improving evaluation accuracy. To enhance AesRM-CoT, we additionally propose self-consistency-based CoT synthesis to improve CoT quality and design CoT-based process rewards during GRPO. Extensive experiments show AesRM outperforms baselines on multiple aesthetics benchmarks and is more robust, with lower position bias. Finally, we align Wan2.2 with AesRM and observe clear aesthetic gains over existing aesthetic reward models.

Minute-scale cinematic video generation is a central challenge for generative video models. Existing paradigms address only fragments of this challenge: single-shot extrapolation preserves an anchor but lacks cinematic structure, while multi-shot storytelling imposes structure yet remains free to invent its visual states rather than continue an observed one. We define Multi-Shot Video Extrapolation (MSVE), a task that extends an observed frame or clip into a sequence of cinematically structured shots while preserving anchor state and advancing narrative intent. This setting operates under the finite per-call generation budget of short-video models. We identify three coupled bottlenecks: (1) global planners over-specify unsupported details from full screenplays; (2) shot-level prompts dilute task-relevant state when carrying the complete story; and (3) temporal chaining turns generated frames into a lossy memory in which identity, scene, object, and action state decay. MSVE reveals that long-video failure is not merely a limitation of context length, but a failure of context allocation. We propose Recursive Context Allocation (ReCA), an inference-time framework that allocates context hierarchically across planning and generation. ReCA recursively decomposes MSVE into context-bounded subproblems, invokes frozen generators at leaf nodes, and propagates structured state updates across time. To evaluate this setting, we further propose MSVE-Bench and NB-Q, a source-grounded protocol with prompts purpose-built for 3 to 5 minute long-video generation, a regime not addressed by existing short-clip benchmarks. Compared to previous methods, ReCA improves average normalized score by 8 to 16 percent over the strongest competing controller and improves multi-shot consistency metrics by 28 to 43 percent. View the project page at https://reca.vmv.re.

Sparse attention mechanisms aim to reduce computational overhead with minimal accuracy loss by selectively processing salient tokens. Despite their effectiveness, most methods merely exploit a model’s inherent sparsity and thus plateau at moderate budgets (about 50\% token reduction), with little headroom to push budget lower without hurting accuracy. Other approaches attempt to enforce sparsity through trainable sparse attention or sharpness-inducing regularizers, but these either fix rigid patterns that ignore input and layer dynamics, or optimize proxy objectives without direct control over token budgets. In this paper, we explicitly reinforce token sparsity in well-posed multimodal large language models (MLLMs) through a simple RL-based post-training framework named $\textit{Sparsity Forcing}$. Our method explores the efficiency-accuracy trade-off by running multiple rollouts with different token budgets, where both efficiency (token reduction ratio) and performance (answer correctness) are formulated as joint rewards. By contrasting rollouts within each group, the more efficient and correct answer is rewarded while less efficient or incorrect ones are penalized, thereby turning token saving into an end-to-end, inference-consistent optimization objective. Across thirteen image and video benchmarks, Sparsity Forcing raises token reduction ratio on Qwen2-VL/Qwen2.5-VL from 20\% to 75\% with minimal accuracy decline, significantly reducing long-context inference memory by up to 3$\times$ while speeding up decoding by up to 3.3$\times$.

Vision-Language-Action (VLA) models predominantly adopt action chunking, i.e., predicting and committing to a short horizon of consecutive low-level actions in a single forward pass, to amortize the inference cost of large-scale backbones and reduce per-step latency. However, committing these multi-step predictions to real-world execution requires balancing success rate against inference efficiency, a decision typically governed by fixed execution horizons tuned per task. Such heuristics ignore the state-dependent nature of predictive reliability, leading to brittle performance in dynamic or out-of-distribution settings. In this paper, we introduce A3, an Adaptive Action Acceptance mechanism that reframes dynamic execution commitment as a self-speculative prefix verification problem. A3 first computes a trajectory-wise consensus score of actions via group sampling, then selects a representative draft and prioritizes downstream verification. Specifically, it enforces: (1) consensus-ordered conditional invariance, which validates low-consensus actions by judging whether they remain consistent when re-decoded conditioned on high-consensus actions; and (2) prefix-closed sequential consistency, which guarantees physical rollout integrity by accepting only the longest continuous sequence of verified actions starting from the beginning. Consequently, the execution horizon emerges as the longest verifiable prefix satisfying both internal model logic and sequential execution constraints. Experiments across diverse VLA models and benchmarks demonstrate that A3 eliminates the need for manual horizon tuning while achieving a superior trade-off between execution robustness and inference throughput.

Recent generative video world models aim to simulate visual environment evolution, allowing an observer to interactively explore the scene via camera control. However, they implicitly assume that the world only evolves within the observer's field of view. Once an object leaves the observer's view, its state is "frozen" in memory, and revisiting the same region later often fails to reflect events that should have occurred in the meantime. In this work, we identify and formalize this overlooked limitation as the "out-of-sight dynamics" problem, which impedes video world models from representing a continuously evolving world. To address this issue, we propose LiveWorld, a novel framework that extends video world models to support persistent world evolution. Instead of treating the world as static observational memory, LiveWorld models a persistent global state composed of a static 3D background and dynamic entities that continue evolving even when unobserved. To maintain these unseen dynamics, LiveWorld introduces a monitor-based mechanism that autonomously simulates the temporal progression of active entities and synchronizes their evolved states upon revisiting, ensuring spatially coherent rendering. For evaluation, we further introduce LiveBench, a dedicated benchmark for the task of maintaining out-of-sight dynamics. Extensive experiments show that LiveWorld enables persistent event evolution and long-term scene consistency, bridging the gap between existing 2D observation-based memory and true 4D dynamic world simulation. The baseline and benchmark will be publicly available at https://zichengduan.github.io/LiveWorld/index.html.

Multimodal Large Language Models (MLLMs) have made significant strides in visual understanding and generation tasks. However, generating interleaved image-text content remains a challenge, which requires integrated multimodal understanding and generation abilities. While the progress in unified models offers new solutions, existing benchmarks are insufficient for evaluating these methods due to data size and diversity limitations. To bridge this gap, we introduce OpenING, a comprehensive benchmark comprising 5,400 high-quality human-annotated instances across 56 real-world tasks. OpenING covers diverse daily scenarios such as travel guide, design, and brainstorming, offering a robust platform for challenging interleaved generation methods. In addition, we present IntJudge, a judge model for evaluating open-ended multimodal generation methods. Trained with a novel data pipeline, our IntJudge achieves an agreement rate of 82.42% with human judgments, outperforming GPT-based evaluators by 11.34%. Extensive experiments on OpenING reveal that current interleaved generation methods still have substantial room for improvement. Key findings on interleaved image-text generation are further presented to guide the development of next-generation models.

Model reparameterization is a widely accepted technique for improving inference speed without compromising performance. However, current Post-training Quantization (PTQ) methods often lead to significant accuracy degradation when applied to reparameterized models. This is primarily caused by channel-specific and sample-specific outliers, which appear only at specific samples and channels and impact on the selection of quantization parameters. To address this issue, we propose RepAPQ, a novel framework that preserves the accuracy of quantized reparameterization models. Different from previous frameworks using Mean Squared Error (MSE) as a measurement, we utilize Mean Absolute Error (MAE) to mitigate the influence of outliers on quantization parameters. Our framework comprises two main components: Quantization Protecting Reparameterization and Across-block Calibration. For effective calibration, Quantization Protecting Reparameterization combines multiple branches into a single convolution with an affine layer. During training, the affine layer accelerates convergence and amplifies the output of the convolution to better accommodate samples with outliers. Additionally, Across-block Calibration leverages the measurement of stage output as supervision to address the gradient problem introduced by MAE and enhance the interlayer correlation with quantization parameters. Comprehensive experiments demonstrate the effectiveness of RepAPQ across various models and tasks. Our framework outperforms previous methods by approximately 1\% for 8-bit PTQ and 2\% for 6-bit PTQ, showcasing its superior performance. The code is available at \url{https://github.com/ilur98/DLMC-QUANT}.

Text-to-image (T2I) models have recently experienced rapid development, achieving astonishing performance in terms of fidelity and textual alignment capabilities. However, given a long paragraph (up to 512 words), these generation models still struggle to achieve strong alignment and are unable to generate images depicting complex scenes. In this paper, we introduce an information-enriched diffusion model for paragraph-to-image generation task, termed ParaDiffusion, which delves into the transference of the extensive semantic comprehension capabilities of large language models to the task of image generation. At its core is using a large language model (e.g., Llama V2) to encode long-form text, followed by fine-tuning with LORA to alignthe text-image feature spaces in the generation task. To facilitate the training of long-text semantic alignment, we also curated a high-quality paragraph-image pair dataset, namely ParaImage. This dataset contains a small amount of high-quality, meticulously annotated data, and a large-scale synthetic dataset with long text descriptions being generated using a vision-language model. Experiments demonstrate that ParaDiffusion outperforms state-of-the-art models (SD XL, DeepFloyd IF) on ViLG-300 and ParaPrompts, achieving up to 15% and 45% human voting rate improvements for visual appeal and text faithfulness, respectively. The code and dataset will be released to foster community research on long-text alignment.

We present Wan-Move, a simple and scalable framework that brings motion control to video generative models. Existing motion-controllable methods typically suffer from coarse control granularity and limited scalability, leaving their outputs insufficient for practical use. We narrow this gap by achieving precise and high-quality motion control. Our core idea is to directly make the original condition features motion-aware for guiding video synthesis. To this end, we first represent object motions with dense point trajectories, allowing fine-grained control over the scene. We then project these trajectories into latent space and propagate the first frame's features along each trajectory, producing an aligned spatiotemporal feature map that tells how each scene element should move. This feature map serves as the updated latent condition, which is naturally integrated into the off-the-shelf image-to-video model, e.g., Wan-I2V-14B, as motion guidance without any architecture change. It removes the need for auxiliary motion encoders and makes fine-tuning base models easily scalable. Through scaled training, Wan-Move generates 5-second, 480p videos whose motion controllability rivals Kling 1.5 Pro's commercial Motion Brush, as indicated by user studies. To support comprehensive evaluation, we further design MoveBench, a rigorously curated benchmark featuring diverse content categories and hybrid-verified annotations. It is distinguished by larger data volume, longer video durations, and high-quality motion annotations. Extensive experiments on MoveBench and the public dataset consistently show Wan-Move's superior motion quality. Code, models, and benchmark data are made available.

In this paper, we propose ZipAR, a training-free, plug-and-play parallel decoding framework for accelerating autoregressive (AR) visual generation. The motivation stems from the observation that images exhibit local structures, and spatially distant regions tend to have minimal interdependence. Given a partially decoded set of visual tokens, in addition to the original next-token prediction scheme in the row dimension, the tokens corresponding to spatially adjacent regions in the column dimension can be decoded in parallel. To ensure alignment with the contextual requirements of each token, we employ an adaptive local window assignment scheme with rejection sampling analogous to speculative decoding. By decoding multiple tokens in a single forward pass, the number of forward passes required to generate an image is significantly reduced, resulting in a substantial improvement in generation efficiency. Experiments demonstrate that ZipAR can reduce the number of model forward passes by up to 91% on the Emu3-Gen model without requiring any additional retraining.

Visual autoregressive models typically adhere to a raster-order ``next-token prediction" paradigm, which overlooks the spatial and temporal locality inherent in visual content. Specifically, visual tokens exhibit significantly stronger correlations with their spatially or temporally adjacent tokens compared to those that are distant. In this paper, we propose Neighboring Autoregressive Modeling (NAR), a novel paradigm that formulates autoregressive visual generation as a progressive outpainting procedure, following a near-to-far ``next-neighbor prediction" mechanism. Starting from an initial token, the remaining tokens are decoded in ascending order of their Manhattan distance from the initial token in the spatial-temporal space, progressively expanding the boundary of the decoded region. To enable parallel prediction of multiple adjacent tokens in the spatial-temporal space, we introduce a set of dimension-oriented decoding heads, each predicting the next token along a mutually orthogonal dimension. During inference, all tokens adjacent to the decoded tokens are processed in parallel, substantially reducing the model forward steps for generation. Experiments on ImageNet$256\times 256$ and UCF101 demonstrate that NAR achieves 2.4$\times$ and 8.6$\times$ higher throughput respectively, while obtaining superior FID/FVD scores for both image and video generation tasks compared to the PAR-4X approach. When evaluating on text-to-image generation benchmark GenEval, NAR with 0.8B parameters outperforms Chameleon-7B while using merely 0.4 of the training data. Code is available at https://github.com/ThisisBillhe/NAR.

The efficiency of large vision-language models (LVLMs) is constrained by the computational bottleneck of the attention mechanism during the prefill phase and the memory bottle-neck of fetching the key-value (KV) cache in the decoding phase, particularly in scenarios involving high-resolution images or videos. Visual content often exhibits substantial redundancy, resulting in highly sparse attention maps within LVLMs. This sparsity can be leveraged to accelerate attention computation or compress the KV cache through various approaches. However, most studies focus on addressing only one of these bottlenecks and do not adequately support dynamic adjustment of sparsity concerning distinct layers or tasks. In this paper, we present ZipVL, an efficient inference framework designed for LVLMs through a dynamic ratio allocation strategy of important tokens. This ratio is adaptively determined based on the layer-specific distribution of attention scores, rather than fixed hyper-parameters, thereby improving efficiency for less complex tasks while maintaining high performance for more challenging ones. Then we select important tokens based on their normalized attention scores and perform sparse attention mechanism solely on those important tokens, reducing the latency in the prefill phase. Tokens deemed less important will be discarded to reduce KV cache size, alleviating the memory bottleneck in the decoding phase. Our experiments demonstrate that ZipVL can accelerate the prefill phase by $2.3 \times$ and improve decoding throughput by $2.8 \times$, with a minimal accuracy reduction of only 0.5% on VQAv2 benchmark over LLaVA-Next-13B model, effectively enhancing the generation efficiency of LVLMs.