Frequency mixers are fundamental components in modern wireless communication and radar systems, responsible for up- and down-conversion of target radio-frequency (RF) signals. Recently, photonic-assisted RF mixers have shown unique advantages over traditional electronic counterparts, including broad operational bandwidth, flat frequency response, and immunity to electromagnetic interference. However, current integrated photonic mixers face significant challenges in achieving efficient conversion at high frequencies, especially in millimeter-wave bands, due to the limitations of existing electro-optic (EO) modulators. Additionally, high-frequency local oscillators in the millimeter-wave range are often difficult to obtain and expensive, leading to unsatisfactory cost and restricted operational bandwidth in practice. In this paper, we harness the exceptional EO property and scalability of thin-film lithium niobate (TFLN) photonic platform to implement a high-performance harmonic reconfigurable millimeter-wave mixer. The TFLN photonic circuit integrates a broadband EO modulator that allows for extensive frequency coverage, and an EO frequency comb source that significantly reduces the required carrier frequency of the local oscillator. We experimentally demonstrate fully reconfigurable frequency down-conversion across a broad operational bandwidth ranging from 20 GHz to 67 GHz, with a large intermediate frequency of 20 GHz, as well as up-conversion to frequencies of up to 110 GHz. Our integrated photonic mixing system shows dramatically improved bandwidth performance, along with competitive indicators of frequency conversion efficiency and spurious suppression ratio, positioning it as a promising solution for future millimeter-wave transceivers in next-generation communication and sensing systems.

Light detection and ranging (LiDAR) is a ubiquitous tool to provide precise spatial awareness in various perception environments. A bionic LiDAR that can mimic human-like vision by adaptively gazing at selected regions of interest within a broad field of view is crucial to achieve high-resolution imaging in an energy-saving and cost-effective manner. However, current LiDARs based on stacking fixed-wavelength laser arrays and inertial scanning have not been able to achieve the desired dynamic focusing patterns and agile scalability simultaneously. Moreover, the ability to synchronously acquire multi-dimensional physical parameters, including distance, direction, Doppler, and color, through seamless fusion between multiple sensors, still remains elusive in LiDAR. Here, we overcome these limitations and demonstrate a bio-inspired frequency-modulated continuous wave (FMCW) LiDAR system with dynamic and scalable gazing capability. Our chip-scale LiDAR system is built using hybrid integrated photonic solutions, where a frequency-chirped external cavity laser provides broad spectral tunability, while on-chip electro-optic combs with elastic channel spacing allow customizable imaging granularity. Using the dynamic zoom-in capability and the coherent FMCW scheme, we achieve a state-of-the-art resolution of 0.012 degrees, providing up to 15 times the resolution of conventional 3D LiDAR sensors, with 115 equivalent scanning lines and 4D parallel imaging. We further demonstrate cooperative sensing between our adaptive coherent LiDAR and a camera to enable high-resolution color-enhanced machine vision.

We realize arbitrary engineering of resonant frequencies by mode splitting in both isotropic z-cut LN and anisotropic x-cut LN photonic crystal ring resonators. Spectral engineering in x-cut LN is realized by a gradient design that precisely compensates for variations in both refractive index and perturbation strength.

On-chip optical microresonators are essential building blocks in integrated optics. The ability to arbitrarily engineer their resonant frequencies is crucial for exploring novel physics in synthetic frequency dimensions and practical applications like nonlinear optical parametric processes and dispersion-engineered frequency comb generation. Photonic crystal ring (PhCR) resonators are a versatile tool for such arbitrary frequency engineering, by controllably creating mode splitting at selected resonances. To date, these PhCRs have mostly been demonstrated in isotropic photonic materials, while such engineering can be significantly more complicated in anisotropic platforms that often offer more fruitful optical properties. Here, the spectral engineering of chip-scale optical microresonators is realized in the anisotropic lithium niobate (LN) crystal by a gradient design that precisely compensates for variations in both refractive index and perturbation strength. Controllable frequency splitting is experimentally demonstrated at single and multiple selected resonances in LN PhCR resonators with different sizes, while maintaining high quality-factors up to 1 × 106. Moreover, a sharp boundary is experimentally constructed in the synthetic frequency dimension based on an actively modulated x-cut LN gradient-PhCR, opening up new paths toward the arbitrary control of electro-optic comb spectral shapes and exploration of novel physics in the frequency degree of freedom.

We demonstrate 6.48 Tb/s transmission using 50-GHz integrated lithium niobate flat-top electro-optic (EO) combs over a 53-km field-deployed link and show their flexibility in generating combs with variable frequency spacing and using multiple laser sources.

Waveguide crossings are elementary passive components for signal routing in photonic integrated circuits. Here, we design and characterize two multimode interferometer (MMI)-based waveguide crossings to serve the various routing directions in the anisotropic x-cut thin-film lithium niobate (TFLN) platform. To address the large measurement uncertainties in traditional cut-back characterization methods, we propose and demonstrate a resonator-assisted approach that dramatically reduces the uncertainty of insertion loss measurement (< 0.021 dB) and the lower bound of crosstalk measurement (-60 dB) using only two devices. Based on this approach, we demonstrate and verify TFLN waveguide crossings with insertion losses of < 0.070 dB and crosstalk of < -50 dB along all three routing directions at 1550 nm. The low-loss and low-crosstalk waveguide crossings in this work, together with the simple and efficient characterization strategy, could provide important layout design flexibility for future large-scale classical and quantum TFLN photonic circuits.

We realize an EO comb generator with 15× reduction in electrical power consumption using a multi-loop mode-multiplexing design, generating 47 comb lines using a moderate RF driving power of 28 dBm at 25 GHz.

We report thin-film lithium niobate waveguide crossings along three crystal-routing directions, which are precisely characterized by a novel resonator-based method, showing insertion loss of 0.070 dB and crosstalk of -50 dB at 1550 nm.

Integrated electro-optic (EO) frequency combs are essential components for future applications in optical communications, light detection and ranging, optical computation, sensing and spectroscopy. To date, broadband on-chip EO combs are typically generated in high-quality-factor micro-resonators, while the more straightforward and flexible non-resonant method, usually using single or cascaded EO phase modulators, often requires high driving power to realize a reasonably strong modulation index. Here, we show that the phase modulation efficiency of an integrated lithium niobate modulator could be dramatically enhanced by passing optical signals through the modulation electrodes for a total of 4 round trips, via multiple low-loss TE0/TE1 mode multiplexers and waveguide crossings, reducing electrical power consumption by more than one order of magnitude. Using devices fabricated from a wafer-scale stepper lithography process, we demonstrate a broadband optical frequency comb featuring 47 comb lines at a 25-GHz repetition rate, using a moderate RF driving power of 28 dBm (0.63 W). Leveraging the excellent tunability in repetition rate and operation wavelength, our power-efficient EO comb generator could serve as a compact low-cost solution for future high-speed data transmission, sensing and spectroscopy, as well as classical and quantum optical computation systems.