Metal-oxide semiconductor is widely applied in gas sensor for volatile organic compound detection. However, these sensors usually exhibit poor selectivity and inferior sensitivity. Here, ZnO@Fe2O3 microflowers were synthesized using FeOOH microflowers as precursors via a simple solution reaction route, followed by heat treatment. The ZnO@Fe2O3 microflowers were characterized using a series of techniques, and their sensing responses to volatile organic compounds (VOCs) were evaluated in comparison with those of pristine Fe2O3. The ZnO@Fe2O3 microflower sensor exhibited better responses to several gases, especially acetone, with a response of 74.3 towards 100 ppm acetone, which is 2.85 times higher than that of the Fe2O3 microflower sensor. The sensor also presented high selectivity, reproducibility, and stability in sensing different VOCs. The large specific surface area, heterostructure, favorable hierarchical flower-like nanostructure assembled by the nanosheets, and high porosity of the ZnO@Fe2O3 microflowers contributed to its enhanced gas-sensing responses. Overall, this synthetic strategy for fabricating flower-like ZnO@Fe2O3 nanostructures can be widely applied.

Ensuring an appropriate nitrite level in food is essential to keep the body healthy. However, it still remains a huge challenge to offer a portable and low-cost on-site food nitrite analysis without any expensive equipment. Herein, a portable integrated electrochemical sensing system (IESS) is developed to achieve rapid on-site nitrite detection in food, which is composed of a low-cost disposable microfluidic electrochemical patch for few-shot nitrite detection, and a reusable smartphone-assisted electronic device based on self-designed circuit board for signal processing and wireless transmission. The electrochemical patch based on MXene-Ti3C2Tx/multiwalled carbon nanotubes-cyanocobalamin (MXene/MWCNTs-VB12)-modified working electrode achieves high sensitivity of 10.533 mu A mm-1 and low nitrite detection limit of 4.22 mu m owing to strong electron transfer ability of hybrid MXene/MWCNTs conductive matrix and high nitrite selectivity of VB12 bionic enzyme-based ion-selective layer. Moreover, the portable IESS can rapidly collect pending testing samples through a microfluidic electrochemical patch within 1.0 s to conduct immediate nitrite analysis, and then wirelessly transmit data from a signal-processing electronic device to a smartphone via Bluetooth module. Consequently, this proposed portable IESS demonstrates rapid on-site nitrite analysis and wireless data transmission within one palm-sized electronic device, which would pave a new avenue in food safety and personal bespoke therapy. A portable integrated electrochemical sensing system (IESS) is developed to realize its rapid on-site few-shot nitrite analysis and wireless data transmission capability within one palm-sized electronic device. The utilization of hybrid MXene/MWCNTs conductive matrix and VB12 bionic enzyme-based ion-selective layer as electrode materials achieves excellent nitrite analysis performances.image

Harmful algal bloom (HAB) is an unresolved existing problem worldwide. Here, we reported a novel algicidal bacterium, Pseudomonas fragi YB2, capable of lysing multiple algal species. To Chlorella vulgaris, YB2 exhibited a maximum algicidal rate of 95.02 % at 120 h. The uniqueness of YB2 lies in its ability to self-produce three algicidal compounds: 2-methyl-1, 3-cyclohexanedione (2-MECHD), N-phenyl-2-naphthylamine, and cyclo (ProLeu). The algicidal properties of 2-MECHD have not been previously reported. YB2 significantly affected the chloroplast and mitochondrion, thus decreasing in chlorophyll a by 4.74 times for 120 h and succinate dehydrogenase activity by 103 times for 36 h. These physiological damages disrupted reactive oxygen species and Ca2+ homeostasis at the cellular level, increasing cytosolic superoxide dismutase (23 %), catalase (35 %), and Ca2+ influx. Additionally, the disruption of Ca2+ homeostasis rarely reported in algicidal bacteria-algae interaction was observed using the non-invasive micro-test technology. We proposed a putative algicidal mechanism based on the algicidal outcomes and physiological algicidal effects and explored the potential of YB2 through an algicidal simulation test. Overall, this study is the first to report the algicidal bacterium P. fragi and identify a novel algicidal compound, 2-MECHD, providing new insights and a potent microbial resource for the biocontrol of HAB.

Nitrogen-doped, carbon-coated (Zn0.71Mn0.29)Se/MnSe porous nanospheres (Zn–Mn–Se@NC) were designed via a co-precipitation method and a vapor-phase selenization strategy, which maintained a capacity of 290 mAh/g for 5 A/g after 1000 cycles and 190 mAh/g at 10 A/g. The satisfied cycling performance was due to the porous nanosphere that relieve volume effect of electrode. Furthermore, the heterogeneous interface formed by (Zn0.71Mn0.29)Se and MnSe enhances thermodynamic stability and electrochemical reaction kinetics considerably, improving the electron/Na+ transfer rate. Furthermore, Zn–Mn–Se@NC, a bimetallic selenide, exhibits superior conductivity that improves the rate capacity of the Zn–Mn–Se@NC electrode. As an anode, the long-cycle and high-rate sodium-ion batteries using the Zn–Mn–Se@NC porous nanospheres have potential applications in electronic devices.

Sensitive detection and effective inactivation of bacteria are essential in preventing foodborne bacterial infection that poses a significant threat to human health. Herein, a near-infrared (NIR)-driven multifunctional photoelectrochemical (PEC) biosensor was constructed for detection and inactivation of S. aureus. Based on the covalent bonding between amine and carboxyl groups, carboxyl-functionalized SA31 aptamer was immobilized on the PDA/MnO2 photoelectrode. In the presence of S. aureus, SA31 aptamer can specifically capture S. aureus, causing the decrease of photocurrent signal owing to steric hindrance effect. Leveraging photocurrent-off signal, there existed a satisfied linear relationship between the photocurrent variation and the logarithm of S. aureus concentration, achieving a wide linear range from 10 to 107 CFU/mL with a low detection limit of 2.0 CFU/mL. Notably, PDA/MnO2 with peroxidase-like activity facilitated the catalytic oxidation of S. aureus with assistance of hydrogen peroxide (H2O2) to cause the inactivation of S. aureus. Desorption of inactivated S. aureus from the photoelectrode led to a recovery of photocurrent signal, enabling a "signal on" switch. Simultaneously, the excellent photothermal performance of the PDA/MnO2 converted light energy into heat energy under the irradiation of NIR light (808 nm, 1.5 W/cm2), triggering the synergistic antibacterial effect against S. aureus (97.36%). This work provides a novel strategy for fabricating the detection and inactivation of bacteria in practical applications.

Staphylococcus aureus (S. aureus) infections pose a serious threat to human health worldwide. Therefore, selective and accurate detection of S. aureus is necessary for preventing infections. Herein, we design the colorimetric-electrochemical sensing platform based on specific oligonucleotide (SA31 aptamer)-tunable oxidase-like activity of mesoporous polydopamine/MnO2 (MPDA/MnO2) nanozymes for the S. aureus detection. The MPDA/MnO2 nanozymes possess excellent oxidase-like activity and electrochemical property. MPDA/MnO2 nanozymes can catalyze the oxidation of TMB to generate TMB+ (blue color) and TMB2+ (yellow color) products. The oxidase-like activity of MPDA/MnO2 can be inhibited when the SA31 is adsorbed on the surface of the nanozymes. In the presence of S. aureus, SA31 aptamer desorbs from MPDA/MnO2 surface based on the specific identification between S. aureus and aptamer, resulting in the recovery of their oxidase-like activity. Based on the different oxidative degree of TMB, the color of sensing solution changes from blue to yellow, the electrochemical signals also have changed simultaneously. The colorimetric-electrochemical sensing platform can accurately detect S. aureus, showing a low detection limit in 3 CFU/mL (S/N = 3). Furthermore, the dual-mode sensing platform can be utilized for the accurate and specific detection of S. aureus in real sample with the recovery of 95.15%- 115.28%. This work based on SA31 aptamer-tunable oxidase-like activity of MPDA/MnO2 nanozymes provides a dual-mode assay for specific and accurate detection of S. aureus.

Gold nanoclusters (AuNCs) are widely used in the fluorescence detection of biomolecules in human serum due to their good fluorescence properties, low toxicity, and better biocompatibility. However, the weak fluorescence intensity of AuNCs limits the fluorescence detection of molecules within a wide concentration range. It is reported that coating AuNCs in ZIF-8 with adjustable pore size can effectively improve the fluorescence intensity of AuNCs and broaden the detection range. And the AuNCs wrapped in the gaps of ZIF-8 can prevent the fluorescence quenching caused by the aggregation of AuNCs. However, ZIF-8 has high crystallinity, poor dispersion, and easy deposition, which reduces the fluorescence stability of the detection system and affects the detection. Based on the above research, the highly hydrophilic polymer PEI was modified to the surface of ZIF-8, and a kind of nanocomposite material AuNCs/ChOx@ZIF-8/PEI was obtained by co-encapsulating AuNCs prepared with glutathione as a ligand and cholesterol oxidase (ChOx) into ZIF-8 modified with PEI. The composite material emits strong red light at 650 nm under the excitation of 395-nm light, and the system can sensitively detect cholesterol (Chol) in human serum. Compared with other materials, the PEI-modified composite has better solubility and stability, so the detection effect of Chol is better. Encapsulation of ChOx in the ZIF-8 shell can protect the enzyme and increase the local concentration of ChOx, thereby speeding up the reaction rate. Compared with free AuNCs/ChOx, the quenching rate of AuNCs/ChOx@ZIF-8/PEI system is doubled. Secondly, the addition of Fe2+ to the detection process results in higher quenching rate and detection sensitivity. The system can detect Chol in the concentration range 0.1–2.4 μM, with a detection limit of 0.073 μM. The determination is a fast and sensitive strategy. In addition, the practicability of this assay in the detection of Chol in human serum has been verified. Due to its selectivity and sensitivity, it has potential application value in clinical diagnosis.

Carbon dots/Prussian blue nanoparticles (CDs/PBNPs) with fluorescence (FL) performance and peroxidase-like activity are synthesized by a simple two-step method. The FL of CDs/PBNPs can be effectively quenched by Fe3+. Fe3+ can accelerate the peroxidase-like activity of CDs/PBNPs. More excitingly, the peroxidase-like activity of CDs/PBNPs could be further enhanced due to the influence of the photothermal effect. Based on the FL property and enhanced peroxidase-like activity, a cascade strategy is proposed for detection of Fe3+ and free cholesterol. CD/PBNPs act as FL probe for detection of Fe3+. The enhanced peroxidase-like activity of CDs/PBNPs can also be used as colorimetric probe for the detection of free cholesterol. The detection ranges of Fe3+ and free cholesterol are 4–128 μM and 2–39 μM, and the corresponding limit of detections are 2.0 μM and 1.63 μM, respectively. The proposed strategy has been verified by the feasibility determination of Fe3+ and free cholesterol, suggesting its potential in the prediction of disease.

Gold nanostars(Au NSs) are asymmetric anisotropic nanomaterials with sharp edge structure. As a promising branched nanomaterial, Au NS has excellent plasmonic absorption and scattering properties. In order to tune the plasmonic photothermal and surface-enhanced Raman scattering(SERS) activity of Au NSs to obtain the desired characteristics, the effects of reagents on the local surface plasmon resonance(LSPR) bands of Au NSs were studied and the morphology and size were regulated. Nanoparticles with different sharp edges were synthesized to make their local plasmon resonance mode tunable in the visible and near-infrared region. The effects of the number and sharpness of different tips under the control of AgNO3 on the photothermal response of Au NSs and the SERS activity and their mechanism were discussed in detail. The results show that as the length of the branch tip becomes longer and the sharpness increases, the plasmonic photothermal effect of Au NSs is strengthened, and the photothermal conversion efficiency is the highest up to 40% when the length of Au NSs is the longest. Au NSs with high SERS activity are used for the Raman detection substrate. Based on this property, the quantitative detection of the pesticide thiram is achieved.

An antioxidant-active polysaccharide (WMP) with a molecular weight of 26.91 kDa was isolated from Mentha haplocalyx Briq by water extraction, ethanol precipitation and gel filtration. According to HPLC, methylation, GC-MS, and 1D/2D nuclear magnetic resonance spectroscopy, WMP is a heteropolysaccharide composed of Gal (84.2 %), Glc (9.8 %), Man (2.8 %) and Ara (3.2 %) with (1 -> 6)-alpha-D-Galp and (1 -> 4, 6)-alpha-D-Galp residues in the backbone and (1 -> 6)-alpha-D-Galp and (1 -> 6)-alpha-D-Glcp residues in the branch. The branch point was located at C-4 of (1 -> 4, 6)-alpha-D-Galp residue with a branching degree of 19.71 %. WMP showed remarkably high scavenging ability for 1, 1-diphenyl-2-picrylhydrazyl (DPPH) and hydroxyl radicals, ferrous ion chelating activity and ferric reducing powder in vitro. In vivo result showed that WMP oral administration substantially increased the activities of antioxidant enzymes, including SOD, GSH-Px and CAT, and decreased MDA levels in the serum and liver of D-Gal-induced aging mice. Therefore, WMP can be an effective natural antioxidant.