We demonstrate an apodization technique by tapering the corrugations of spiral Bragg grating waveguides on the silicon-on-insulator platform, for the fundamental transverse magnetic mode. The transmission and reflection responses of uniform and apodized spiral Bragg grating waveguides are experimentally compared to show higher sidelobe suppression ratios by the proposed apodization scheme. We also present an apodized, period-chirped spiral Bragg grating waveguide, and the group delay of the proposed device has been measured; the results show an efficient suppression in the ripples of the group delay response.

This paper evaluates novel design strategies to enhance the performance of a recently proposed waveguide-based pulse-shaping method, i.e., discrete space-to-time mapping (D-STM), demonstrating the capability of the method to shape pulse waveforms with duration periods in the tens of picoseconds regime. In particular, we experimentally synthesize 70-ps high-quality flat-top pulses and a 40-ps-long 200-GBd 16-quadrature amplitude modulation (16-QAM) data sequence using D-STM in concatenated co-directional couplers. Our proposed devices have been fabricated on a silicon-on-insulator (SOI) technology platform using ultraviolet and single-etch electron-beam lithography processes. The fabricated devices are all-passive, functioning without needing post-fabrication tuning, which further proves the robust performance of the proposed scheme.

We report on a wave length-selective polarization rotating reflector using a partially-etched asymmetric Bragg grating on a silicon-on-insulator strip waveguide that has a maximum polarization-extinction-ratio greater than 27 dB and a 1-dl! bandwidth of 2.6 nm.

We experimentally demonstrate sinusoidal anti-coupling silicon-on-insulator strip waveguides, separated by 200 nm, that have a minimum inter-waveguide crosstalk suppression of 26.8 dB within the C-band for the fundamental transverse electric mode.

We demonstrate spiral Bragg grating waveguides (BGWs) on the silicon-on-insulator (SOI) platform for the fundamental transverse magnetic (TM) mode. We also compare TM spiral waveguides to equivalent transverse electric (TE) spiral waveguides and show that the TM spiral waveguides have lower propagation losses. Our spiral waveguides are space-efficient, requiring only areas of 131×131 µm(2) to accommodate 4 mm long BGWs, and, thus, are less susceptible to fabrication non-uniformities. Due to the lengths and reduced susceptibility to fabrication non-uniformities, we were able to obtain narrow bandwidth, large extinction ratio (ER) devices, as narrow as 0.09 nm and as large as 52 dB, respectively. Finally, we demonstrate a 4 mm long TM chirped spiral Bragg grating waveguide with a negative, average, group delay slope of -11 ps/nm.

We report on a wavelength-selective, polarization-rotating filter using a partially etched asymmetric Bragg grating on a compact single-mode, silicon-on-insulator (SOI) strip waveguide. The asymmetric Bragg grating rotates and reflects the fundamental transverse electric (TE) and transverse magnetic (TM) modes at selected wavelengths. Our device offers wavelength-selective, polarization-rotating reflection at its reflection port and wavelength-selective, polarization-independent notch filtering at its through port. The device is fabricated using a CMOS-compatible process with 193 nm-deep ultraviolet lithography on an SOI platform. We present results for a 294.4 μm long device that has a 3 dB bandwidth of 2.63 nm and a low-excess loss of less than 1 dB. This device also has a maximum polarization-extinction-ratio of greater than 27 dB.

We demonstrate 3-dB broadband directional couplers that use asymmetric-waveguide-based phase compensation. Average coupling ratios of 46.57% and 48.28% were obtained from 1500 nm to 1600 nm for transverse electric and transverse magnetic modes, respectively.

We design and demonstrate broadband directional couplers that use asymmetric-waveguide based phase control sections, on the silicon-on-insulator platform. Broadband directional couplers with various power splitting ratios, including 10%/90%, 20%/80%, 30%/70%, 40%/60% and 50%/50%, were realized for both transverse electric (TE) and transverse magnetic (TM) modes. Some of the devices exhitbit bandwidths in excess of 100 nm, and all in excess of 75 nm. The footprints of the TE mode couplers are 32 μm ×1.3 μm, or less, and those of the TM mode couplers are 13 μm ×1.3 μm, or less.

We demonstrate a 1 cm long Bragg grating filter, on a compact spiral SOI waveguide, for the fundamental transverse magnetic mode, that has a 0.5 nm bandwidth, 40 dB extinction ratio, and 1 dB/cm loss.