Indium Corporation is a premier materials refiner, smelter, manufacturer, and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934 in Utica, New York, the company has global technical support and factories located in China, Germany, India, Malaysia, Singapore, South Korea, the United Kingdom, and the U.S.S.S.S.S.S.S.S.S.S.S.S.S.S.S.
As warpage during semiconductor assembly process is becoming more challenging due to bigger and thinner die or substrate, low temperature material can be an alternative to mitigate this warpage issue. This work is the continuation of an iNEMI project, on low temperature material for 1st level interconnect, to validate and compare the interconnect reliability of SAC and SnBi solder after various thermal stress tests. Warpage measurement is done on the test vehicles, before subjecting them to thermal aging and thermal shock tests.
ABSTRACT Increased electrification is demanding harsher reliability mission profiles in power electronics. The use of Silicon Carbide (SiC) or Gallium Nitride (GaN) semiconductors in automotive applications, has increased by orders of magnitude. Sintering is an emerging technology and is being seen as a credible alternative to soldering, to form reliable interconnections for use in harsh environments. As an example, the use of silver (Ag) in sintering allows for the dies to operate at higher temperatures in excess of 200°C (as Ag has a high melting point of 962°C). Metal sintering is the surface interdiffusion of adjacent atoms to create a metal particle network (necking). The primary process sinter parameters to control the densification and the joint strength of the sinter connection include particle size, temperature, time, pressure, and the nature of the sintering atmosphere. The first electronic applications of silver sintering technology dates to the early 1970s with patent US48106721 proposed for power electronics. Since then, there has been an increase in the scope of applications as well as the available sinter materials. Unlike soldering processes that are bound by industry standards such as IPC-J-STD001 (requirements for soldered electronic assemblies), IPC-A-610 (Acceptability of Electronic Assemblies) - there is a lack of industry standards for sintering processes including those for mass production environments to address variations. The DKE Working Group in partnership with the IEC Standards for Sintering Technologies, is working on addressing this gap. The current study provides a generic description of sintering technologies - pressure-assisted sintering, pressure sintering, pressure-less sintering - used in manufacturing processes of components and circuits for electronics and power electronics applications. It includes information about sinter materials, sintering processes, process equipment, test methods and evaluating the quality and reliability of sintered interconnects. This document is focused on interconnect joining technologies for electronics and power electronics applications.
The exponential growth of artificial intelligence (AI), high-performance computing (HPC), and advanced data center applications has triggered a fundamental shift in the power and thermal management requirements of modern semiconductor packages. Mainstream CPUs and GPUs that once operated within the 150 – 250W range now commonly exceed 400 – 700W, with the next generation of HPC processors reaching well into the kW scale. This increase in thermal design power (TDP) directly translates to heightened junction temperature, creating challenges to maintain device reliability and performance of new and upcoming processor designs. Indium-based solder TIMs have emerged as a compelling alternative to traditional thermal greases, gels, and other polymeric TIMs due to their unique combination of high bulk thermal conductivity and mechanical ductility to withstand stresses imposed on the stack-up from CTE mismatch and warpage of the silicon die.Despite these advantages, voiding can occur during reflow as a result of two main factors: insufficient wetting and trapped gases by volatile byproducts from a flux vehicle. For BGA applications, the solder TIM is not only reflowed at the chip level but is then subjected to multiple reflows during the ball-attach and main board reflow steps (not including potential rework steps). This work will focus on the use of formic acid reflow as a potential fluxless solution to this issue while still maintaining low voiding.
In the artificial intelligence (AI)/high performance computing (HPC) and data center space, high thermal loading is commonplace. High-performance metallic thermal interface materials (TIMs) provide a solution due to their high bulk thermal conductivity but come with their own set of challenges that must be overcome when implemented into any package architecture. Indium-based solder TIM (sTIM) preforms can experience excessive indium oxidation, which can result in increased voiding and poor interfacial contact between high power ASICs and the cold plate/heat spreader. These factors ultimately increase thermal resistance and hinder long-term reliability at the die level. In this work, spectroscopic ellipsometry was used to develop a method to measure the native oxide layer thickness of pure indium preforms and correlate these measurements to items such as isothermal aging and manufacturing processes.
High-power semiconductor devices must be mounted using a robust die-attach material that can handle the temperature fluctuations generated by the chip and mechanical stresses due to CTE mismatches between the die material and the substrate it is mounted to. Traditionally, various die-attach products, such as metal-filled conductive epoxies, high lead-containing solders, and gold-silicon solders, have been sufficient to mount the chip and have it perform reliably for the life of the device it operates. However, the trend toward increasing heat generation, the demand for compact devices, the enactment of RoHS and REACH legislation, and the transition to GaAs chips, limit the use of conventional materials. The demand for high reliability in power devices, in light of these industry trends, has led engineers to evaluate various new materials for their die- attachment. The use of a high temperature solder preform is proposed and demonstrated for use as a die-attach material in high power devices. The suggested solder preforms are eutectic gold-tin and may be implemented for high volume or lab quantity adoption using a Palomar Technologies’ die bonder. This equipment is capable of handling the complete die-attach process, including high-accuracy pick-and-place of substrates, eutectic gold-tin preforms, and components; eutectic die-attach; and pulsed-heat reflow using a computer controlled Pulse Heat Stage (PHS). Each of these steps is precisely controlled to offer a near void-free eutectic die-attach between the device and its substrate. This is critical for thermal and electrical stability in high power applications. When the substrates, preforms, and components are supplied in high volume packaging, the assembly line can be fully automated, which enables a reduction in the cost of ownership and improves process yields. Assembly applications suited for this process include, but are not limited to, high- brightness LEDs, power amplifiers, LASER diodes, VCSELS, lid attach, MEMS, RF packages, IGBT modules and wafer scale packaging.