Precise control over nitrogen (N) content and bonding configurations in N-doped carbon materials has been shown to significantly improve catalytic performance. However, existing synthesis strategies often suffer from uncontrolled defect formation and fail to produce well-defined carbon architectures comparable to graphene oxide (GO) or carbon nanotubes (CNTs). This study presents a strategy that exploits the restructuring behavior of polyethylene glycol (PEG) to simultaneously modulate both N configuration and carbon morphology. By fine-tuning the molecular weight and amount of PEG, pyridinic-, pyrrolic-, and graphitic-N species can be selectively tuned into well-defined carbon frameworks. Comprehensive analyses using X-ray photo-electron spectroscopy, Scanning electron microscopy, and Transmission electron microscopy confirm the regulation of N bonding configurations and the preservation of ordered carbon nanostructures. The optimized catalyst, N900PC4-0.5, exhibits a hollow nanotube/sheet hybrid morphology enriched with graphitic-N for efficient electron transfer, while pyrrolic-N, pyridinic-N, and C & boxH;O functionalities enhance peroxymonosulfate (PMS) adsorption. This configuration and architecture facilitate efficient electron transfer and promote PMS activation via O-1(2)-mediated nonradical pathway, achieving 99.6% removal of methyl paraben within 10 min (k = 0.1 min(-1)). These findings highlight the role of urea-PEG interactions on the configuration and morphology of N-doped carbon materials, offering a strategic approach to tailor their functionality.
ABSTRACT In this study, graphene oxide (GO)‐modified poly (phenylene oxide, PPO) anion exchange membranes (F/GO) were developed for application in anion exchange membrane electrolyzers (AEMELs). The incorporation of GO enhanced membrane hydration, ion‐exchange capacity, and hydroxide‐ion conductivity, resulting in an ~15% increase in current density at 2.0 V and 80°C (0.551 A/cm2) compared with the pristine membrane (0.480 A/cm−2). The F/GO membranes also showed enhanced hydrogen production rates and an HHV‐based energy efficiency of 76% at 0.5 A/cm2 and 80°C. These results underscore the potential for F/GO membranes in scalable AEMEL applications. Mechanical and alkaline stability tests confirmed robustness under harsh conditions. These findings demonstrate that the incorporation of GO provides a simple, scalable, and potentially lower‐cost modification strategy compared with highly engineered polymer architectures, while also improving overall electrolyzer performance, highlighting the potential of GO‐modified membranes for practical hydrogen production in AEMEL systems.
All-inorganic halide perovskite quantum dots (PQDs) encounter significant challenges related to degradation and self-oxidation in aqueous electrolytes, which remain critical obstacles for their efficient utilization in photoelectrochemical (PEC) water oxidation. In this study, we demonstrate the hybridization of zero-dimensional CsPbBr3 PQDs with a SiO2 shell (PQD@SiO2) and the direct harnessing of PQD@SiO2 on a two-dimensional WO3 nanoflake photoanode for boosting PEC water splitting. The ultra-thin SiO2 shell protects the PQDs from the aqueous environment and suppresses undesirable charge recombination. Incorporating PQD@SiO2 enhances light harvesting and manipulates photogenerated charges, amplifying the interfacial electric field of the WO3 photoanode to facilitate PEC water oxidation kinetics. Consequently, PQD@SiO2-incorporated WO3 (PQD@SiO2/WO3) exhibits 2.2-fold higher PEC performance compared to pristine WO3 at 1.23 VRHE, with long-term durability over 12 h and a remarkable Faradaic efficiency of 85.5% for overall solar water splitting to produce H2 at 1.23 V under 1 sun illumination. This novel strategy of a heterostructure consisting of PQDs passivated by an ultra-thin SiO2 shell on a WO3 photoanode paves the way for improving PEC water splitting and efficient hydrogen production.