O.P. Jindal University (OPJU) is a private university located in Raigarh, Chhattisgarh, India. It was established by an Act of Legislature in the state assembly of Chhattisgarh in 2014. It was founded by the Jindal Education and Welfare Society. The OP Jindal University has UGC and AICTE affiliation.P.P.
Aluminum (Al) metallic mirrors are widely used across various manufacturing sectors, putting a premium on producing super-finished surfaces in a variety of geometries. Conventional techniques hinder nano-metric refinement because uncontrolled forces limit precision. This study presents a hybrid chemo-mechanical magnetorheological polishing (CMMRP) process employing microwave-sintered CIP - Al2O3 slurry to achieve consistent refinement of convex surfaces. Slurry media integrating shear-thickening fluids, carbonyl-iron particles (CIP's) and Al2O3 undergo microwave processing. Experiments on Al-convex surfaces explored influences of composite magnetic abrasives (CMA's) concentration, work-gap, feed rate, rotational speed. CMMRP experiments decreased roughness (R-a) from approximately 500-600 nm to 13.72 nm within defined cycles. Uniform removal achieved R-a improvement exceeding 97%, while maintaining geometric integrity under 2.5 mm work-gap, 180 mm/min feed, 800 rpm tool speed and 25 vol% CMA concentration. Surface observations revealed a smooth Al topography without scratches, pits and abrasion marks, confirming stable material removal and controlled CMMRP interactions.
The ongoing drive to achieve high-energy-density supercapacitors (SCs) requires the continuous exploration of advanced electrode materials and the development of optimized device architectures. Here, we report a solution-processed binary nanocomposite comprising poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and tungsten diselenide (WSe2) nanosheets (NSs) synthesized through a simple chemical route with WSe2 loadings of 1 and 5 % w/v. Raman and X-ray photoelectron spectroscopy (XPS) analyses reveal distinct spectral shifts relative to pristine PEDOT:PSS, confirming successful composite formation and strong interfacial interactions. The electrochemical measurements reveal that the PEDOT:PSS/WSe2 nanocomposite with the optimum 1 % w/v of WSe2 NSs delivers a high areal capacitance of 207.6 mF cm-2 at a current density of 0.5 mA cm-2 in 1 M H2SO4 solution. The charge storage analysis of the nanocomposite reveals the dominance of a capacitive-controlled process. A solid-state symmetric SC device with optimized nanocomposite electrodes exhibits a high areal energy density of 15 mu Wh cm-2 at an areal power density of 250 mu W cm-2. The fabricated device exhibits excellent cycling stability, retaining 95.35% of its capacitance with a Coulombic efficiency of 94.03% after 10,000 charge-discharge cycles. The suppressed self-discharge and low leakage current further highlight its strong energy retention capability. The excellent solution processability of PEDOT:PSS/WSe2 nanocomposites, coupled with the rational design of a high-performance symmetric SC, offers a scalable and effective strategy for the development of low-cost, high-performance portable energy storage devices.
Background: Plant diseases are a major challenge for global food production. They lead to significant reductions in crop yield and quality. Fungi, bacteria, viruses and nematodes are common pathogens that attack plants. These diseases not only affect food security but also cause economic losses worldwide. Estimates show that 20-30% of global crop yields are lost annually due to plant diseases. Early detection is necessary to minimize losses and protect crops. Traditional detection methods rely on field observation and laboratory tests. These techniques are time-consuming, labor-intensive and may not be practical for large-scale monitoring. Modern tools, including imaging technologies and machine learning, are emerging as effective solutions. They offer rapid, accurate detection and classification of plant diseases. Methods: This paper reviews plant disease detection techniques with a focus on classification systems and diagnostic tools. The classification is based on disease incidence, mode of spread, symptoms, host parts affected and causative agents. A literature search was performed using databases such as Scopus, Web of Science and Google Scholar. Keywords included “plant disease detection,” “machine learning,” “AI in agriculture,” and “disease management.” Studies from 2005 to 2024 were considered. Priority was given to research discussing image-based diagnosis, hyperspectral imaging and machine learning models. Relevant articles were analyzed for methods, performance and limitations. Result: Machine learning-based models show strong potential for disease detection. Convolutional neural networks (CNNs) are widely used for image classification tasks. Hyperspectral imaging and sensor-based systems improve accuracy. However, limitations exist. Models struggle with dataset imbalance, varying environmental conditions and real-field application. More diverse datasets and field validation are needed. Explainable AI models are also lacking.
Chip morphology significantly influences thermo-mechanical behaviour at the tool-work-piece interface, affecting tool life. During machining, chip morphology and segmentation dominantly influence material machinability. Hence, analyzing chip formation in cutting processes is needed to study material machining mechanisms. This study compares chip morphology during machining of AISI 52100 steel (high carbon chromium alloy steel) under various cutting conditions due to its hardness and wear resistance. Seven C-type and eight S-type advanced single and multilayer tools were used for machining. Design parameters for specific chips were assessed, showing significant variations in chip pitch, length, and diameter between S-type and C-type inserts and cutting tool materials. The continuous-discontinuous zone was chosen for best machinability results. Results suggest that balance between continuous and discontinuous chip formation is key in optimizing machining. A comparison of how different cutting tools influence chip morphology enabled understanding which tools are most effective under various machining conditions.
With its highly tunable electronic properties, doped graphene is a promising platform for next-generation electronic and photonic devices. Achieving selective and reliable n-type doping, together with controlled modulation of the Dirac point, is critical for the realization of high-performance graphene-based devices. Here, we report a simple and effective approach to modulate the electronic properties of single-layer graphene (SLG) using tungsten trioxide (WO3) nanoparticles prepared without the use of hazardous chemicals. The monoclinic crystal structure of the as-prepared WO3 nanoparticles was confirmed by X-ray diffraction and Raman spectroscopy, while transmission electron microscopy verified their uniform size and morphology. The electronic interaction between SLG and WO3 is systematically investigated by Raman spectroscopy, electrical transport measurements, and synchrotron-based photoelectron spectroscopy (PES) measurements. Our results reveal clear n-type doping of graphene with increasing WO3 nanoparticle concentrations (0.1, 0.3, and 0.5 mg mL-1). The corresponding shifts in Fermi energy and changes in sheet carrier concentration are quantitatively determined from transport and PES measurements. A maximum upward shift of the Fermi energy of approximately 200 meV and an electron density of up to similar to 2.4 & times; 1012 cm-2 are achieved for SLG doped with 0.5 mg mL-1 WO3 nanoparticles. This cost-effective and straightforward surface-transfer doping approach offers a viable pathway for controlled electron doping in graphene, potentially facilitating the development of graphene-based electronic devices.