
In 2009 TECO presented a paper at the 70th Glass Problems Conference entitled “How Big is My Carbon Footprint”. In it, TECO compared the carbon dioxide emissions from an air-gas regenerative furnace, an oxy-gas furnace, and a cold-top electric furnace producing 300 ton/day of container glass. This chapter revisits the previous analysis in light of the current political and environmental climate. In 2009 about 50% of US electricity was generated in coal-fired plants, which resulted in a carbon dioxide emission of 1.34 lb./kWh. Since 2009, and more specifically the last couple of years, a third scenario now has to be investigated. This scenario involves replacing natural gas with hydrogen in fuel-fired furnaces. However, as is the case with electric melting, there is a difference in hydrogen's green credentials.
Chapter c10 HOW WILL THE ELECTRIFICATION OF GLASS FURNACES IMPACT REFRACTORIES? Isabelle Cabodi, Isabelle Cabodi Saint-Gobain Research ProvenceSearch for more papers by this authorIsabell Gross, Isabell Gross Cavaillon, FranceSearch for more papers by this authorPierrick Vespa, Pierrick Vespa Saint-Gobain SEFPROSearch for more papers by this authorMichel Gaubil, Michel Gaubil Le Pontet, FranceSearch for more papers by this authorStephane Schaller, Stephane Schaller Le Pontet, FranceSearch for more papers by this author Isabelle Cabodi, Isabelle Cabodi Saint-Gobain Research ProvenceSearch for more papers by this authorIsabell Gross, Isabell Gross Cavaillon, FranceSearch for more papers by this authorPierrick Vespa, Pierrick Vespa Saint-Gobain SEFPROSearch for more papers by this authorMichel Gaubil, Michel Gaubil Le Pontet, FranceSearch for more papers by this authorStephane Schaller, Stephane Schaller Le Pontet, FranceSearch for more papers by this author Book Editor(s):S. K. Sundaram, S. K. SundaramSearch for more papers by this author First published: 08 August 2023 https://doi.org/10.1002/9781394200306.ch10Book Series:Ceramic Transactions Series AboutPDFPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShareShare a linkShare onEmailFacebookTwitterLinkedInRedditWechat Summary One of the main challenges for glass makers in the coming years will be to adapt their melting technology to achieve carbon neutrality. Currently most glass melting still uses fossil fuels, but with penalties for carbon emission and the rising demand for decarbonized glass, alternative energy sources are being investigated. While the electric melting technology has existed for over 100 years, it was less popular due to the high price of electricity and to restrictions in furnace design and cullet use. For a robust high-electrical boosting furnace, the choice of the right refractory materials is crucial to ensure smooth furnace operations and to optimize furnace lifetime. In this chapter, the authors discuss the consequences of the use of high-electrical energy input on bottom paving, electrode blocks and side wall blocks. 83rd Conference on Glass Problems: Ceramic Transactions RelatedInformation
Chapter c13 ADVANCES IN GLASS INDUSTRY ENERGY SAVINGS USING HEAT OXYCOMBUSTION James McAndrew, James McAndrewSearch for more papers by this authorKenneth Kaiser, Kenneth KaiserSearch for more papers by this authorBhupesh Dhungel, Bhupesh DhungelSearch for more papers by this authorJiefu Ma, Jiefu MaSearch for more papers by this authorChendhil Periasamy, Chendhil PeriasamySearch for more papers by this authorRémi Tsiava, Rémi TsiavaSearch for more papers by this authorAbou Ba, Abou BaSearch for more papers by this authorMohand Amirat, Mohand AmiratSearch for more papers by this authorNiomar Marcano, Niomar MarcanoSearch for more papers by this authorXavier Paubel, Xavier PaubelSearch for more papers by this authorTâm Lâm, Tâm LâmSearch for more papers by this authorLuc Jarry AIR LIQUIDE Emre Dumankaya, Luc Jarry AIR LIQUIDE Emre DumankayaSearch for more papers by this authorNeşet Arzan, Neşet ArzanSearch for more papers by this authorBahtiyar Dalgıç, Bahtiyar DalgıçSearch for more papers by this authorErdinç Şükrü ŞIŞECAM, Erdinç Şükrü ŞIŞECAMSearch for more papers by this author James McAndrew, James McAndrewSearch for more papers by this authorKenneth Kaiser, Kenneth KaiserSearch for more papers by this authorBhupesh Dhungel, Bhupesh DhungelSearch for more papers by this authorJiefu Ma, Jiefu MaSearch for more papers by this authorChendhil Periasamy, Chendhil PeriasamySearch for more papers by this authorRémi Tsiava, Rémi TsiavaSearch for more papers by this authorAbou Ba, Abou BaSearch for more papers by this authorMohand Amirat, Mohand AmiratSearch for more papers by this authorNiomar Marcano, Niomar MarcanoSearch for more papers by this authorXavier Paubel, Xavier PaubelSearch for more papers by this authorTâm Lâm, Tâm LâmSearch for more papers by this authorLuc Jarry AIR LIQUIDE Emre Dumankaya, Luc Jarry AIR LIQUIDE Emre DumankayaSearch for more papers by this authorNeşet Arzan, Neşet ArzanSearch for more papers by this authorBahtiyar Dalgıç, Bahtiyar DalgıçSearch for more papers by this authorErdinç Şükrü ŞIŞECAM, Erdinç Şükrü ŞIŞECAMSearch for more papers by this author Book Editor(s):S. K. Sundaram, S. K. SundaramSearch for more papers by this author First published: 08 August 2023 https://doi.org/10.1002/9781394200306.ch13Book Series:Ceramic Transactions Series AboutPDFPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShareShare a linkShare onEmailFacebookTwitterLinkedInRedditWechat Summary Improving energy efficiency, always important in glass manufacturing, has become urgent in the current context of climate change and restricted availability of fuels due to conflict. Oxy-combustion reduces energy consumption by reducing the volume of flue gas, and reduces NO x emissions. Increasing costs of fuel, especially natural gas, have made oxy-combustion particularly interesting recently. Nonetheless, it remains important to further optimize oxy-combustion, where possible, by integrating additional energy-saving technologies. "Heat Oxy-Combustion" abbreviated as "HeatOx" is such a technology, which combines the benefits of oxy-combustion with heat recovery. In this chapter, the authors describe the installation and start-up of a pilot Radiative Heat Exchanger system at the Paşabahçe Glass plant in Targovishte, Bulgaria, by Air Liquide and Şişecam, supported by the LIFE European Program. REFERENCES Air Liquide's Heat Oxy-combustion: An Innovative Energy Saving Solution for Glass Industry , Taekyu Kang , Kenneth Kaiser , Scott Liedel , Luc Jarry , Xavier Paubel , Youssef Joumani and L. Kaya , 76th Conference on Glass Problems , Columbus, Ohio, Nov. 4. 2015 Google Scholar Oxy-fuel tableware furnace with novel oxygen and natural gas preheating system , Tunc Görüney , Neset Arzan Süleyman Koc, Osman Öztürk , Hakan Sahin , Hwanho Kim , Taekyu Kang , Xavier Paubel Youssef and Luc Jarry , 77th Conference on Glass Problems , Columbus, Ohio Nov. 2016 Google Scholar HeatOx makes major efficiency strides , Chloé Caumont-Prim , Xavier Paubel , Tâm Lâm , Sarah Juma and Luc Jarry , Glass Worldwide • May / June 2018 pp. 78 - 80 Google Scholar 83rd Conference on Glass Problems: Ceramic Transactions ReferencesRelatedInformation
Chapter c15 Design and Implementation of Optifire™ Flex Burner for Foam Reduction in OXY-FUEL Glass Furnaces Robert L. Bell, Robert L. Bell Linde Inc., Danbury, CT, USASearch for more papers by this authorGeert Cnossen, Geert Cnossen Linde Inc., Danbury, CT, USASearch for more papers by this authorRobert Miller, Robert Miller Linde Inc., Danbury, CT, USASearch for more papers by this authorGaurav Kulkarni, Gaurav Kulkarni Linde Inc., Danbury, CT, USASearch for more papers by this authorHisashi Kobayashi, Hisashi Kobayashi Linde Inc., Danbury, CT, USASearch for more papers by this author Robert L. Bell, Robert L. Bell Linde Inc., Danbury, CT, USASearch for more papers by this authorGeert Cnossen, Geert Cnossen Linde Inc., Danbury, CT, USASearch for more papers by this authorRobert Miller, Robert Miller Linde Inc., Danbury, CT, USASearch for more papers by this authorGaurav Kulkarni, Gaurav Kulkarni Linde Inc., Danbury, CT, USASearch for more papers by this authorHisashi Kobayashi, Hisashi Kobayashi Linde Inc., Danbury, CT, USASearch for more papers by this author Book Editor(s):S. K. Sundaram, S. K. SundaramSearch for more papers by this author First published: 08 August 2023 https://doi.org/10.1002/9781394200306.ch15Book Series:Ceramic Transactions Series AboutPDFPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShareShare a linkShare onEmailFacebookTwitterLinkedInRedditWechat Summary Foam is generated in a glass furnace because of complex chemical reactions happening within the glass forming batch materials as well as the molten glass. The foam layer acts as insulation and negatively affect heat transfer to the glass-melt, which would subsequently lead to higher fuel consumption and increased crown temperature. The foam can be formed either from the raw batch materials, or from the fining process which is called secondary foaming. Linde's OPTIFIRE™ FLEX burner is designed to mitigate the secondary foam formation. This chapter summarizes the technology development of the FLEX burner and presents the authors' experiences in its implementation and performance on the commercial container glass furnace. Oxy-fuel furnaces using sodium sulfate as a refining agent are prone to secondary foaming due to the high concentration of water vapor. Staged combustion is used in oxy-fuel furnaces to reduce NOx generation and emissions. REFERENCES P.R. Laimbock , PhD thesis Technical University of Eindhoven 1998 . Google Scholar R.G.C. Beerkens , P. Laimbock , in; J Kieffer (Ed.) 60th Conference of Glass Problems-Urban IL , American Ceramic Society , October 19-20, 1999 Google Scholar M. Cable , C.G. Rasul , J. Savage , Glass Technol. 9 ( 2 ) ( 1968 ) Google Scholar R.G.C. Beerkens , Glastech Ber. 71 ( 4 ) ( 1998 ) 111 . Google Scholar R.G.C. Beerkens , P. Laimbock , Ceram. Eng. Sci. Proc. 21 ( 1 ) ( 2000 ) 41 CASGoogle Scholar Kulkarni , G. , De Deigo , J. , Cnossen , G. , Cates , J. , Francis , A. ( 2014 , September 29). " Design Considerations and Emission Performance of Oxy-fuel Burners for Glass Furnaces ". Paper presented at XXIV ICF-EDG Technical Exchange Conference. Google Scholar [7] Kulkarni , G. , Iyoha , U. , Chakravarti , S. , Diggins III , P. , Francis , A. , Panuccio , G. , 2018 . " Staged, Oxy-Fuel Wide Flame Burners to Mitigate Refractory Port Fouling and Foaming in Glass Furnaces ." 78th Glass Problems Conference Google Scholar 83rd Conference on Glass Problems: Ceramic Transactions ReferencesRelatedInformation
Chapter 6 All-Electric-Forehearth Design with Zero Emissions Christoph Jatzwauk, Christoph Jatzwauk F.I.C. Germany GmbH, Mühlweg 48, 92637 WEIDEN, GermanySearch for more papers by this authorStuart Hakes, Stuart Hakes F.I.C. Germany GmbH, Mühlweg 48, 92637 WEIDEN, GermanySearch for more papers by this authorHans Mahrenholtz, Hans Mahrenholtz F.I.C. Germany GmbH, Mühlweg 48, 92637 WEIDEN, GermanySearch for more papers by this author Christoph Jatzwauk, Christoph Jatzwauk F.I.C. Germany GmbH, Mühlweg 48, 92637 WEIDEN, GermanySearch for more papers by this authorStuart Hakes, Stuart Hakes F.I.C. Germany GmbH, Mühlweg 48, 92637 WEIDEN, GermanySearch for more papers by this authorHans Mahrenholtz, Hans Mahrenholtz F.I.C. Germany GmbH, Mühlweg 48, 92637 WEIDEN, GermanySearch for more papers by this author Book Editor(s):S. K. Sundaram, S. K. SundaramSearch for more papers by this author First published: 08 August 2023 https://doi.org/10.1002/9781394200306.ch6Book Series:Ceramic Transactions Series AboutPDFPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShareShare a linkShare onEmailFacebookTwitterLinkedInRedditWechat Summary Gas fired forehearths being by far the most popular design, have been studied and developed in great depth over the decades with numerous variations, all now following the same basic principle of separating the cooling and heating zones in the superstructure to effect better control of the glass conditioning process. F.I.C. has analyzed deeply all common forehearth designs available on the glass market, has further used the competence of their mother company GS, and developed based on this an ALL-ELECTRIC-FOREHEARTH-Design. That new 'FIC-AE-FH' system uses special key feature of a profiled roof block design, which is a perfect feature of almost all good gas fired forehearth designs. FIC-design is using a special heating element. Due to the use of electricity as the sole source of energy there are no CO 2 emissions associated with the use of gas. 83rd Conference on Glass Problems: Ceramic Transactions RelatedInformation