
Staged fracturing of horizontal wells is essential for the effective development of tight sandstone gas reservoirs with low porosity and low permeability,and rational optimization of fracturing treatment parameters is fundamental.The conventional"one-well,one-design"approach has been widely used;however,field practice shows that the correlation between treatment parameters and fracturing effectiveness under this approach is weak.The influence of individual parameters on stimulation performance remains unclear,and the method cannot accommodate the coexistence of multiple reservoir types in strongly heterogeneous tight sandstone gas reservoirs.Taking the JH block of the Jinqiu gas field as the study area,this paper proposes a new concept of"one-stage,one-design,segmented optimization"that considers reservoir quality and sandbody distribution.Following an integrated geology-engineering approach,an efficient design method for optimizing fracturing parameters in horizontal wells in tight sandstone gas reservoirs is established,including reservoir-type-specific optimization,treatment-stage classification,and target-well parameter optimization.A standardized design workflow that can be rapidly reused for different reservoir types is also developed.The results show that,compared with the conventional method,the proposed optimization method shortens the single-well fracturing design cycle by 50%-60%,reduces single-well fracturing cost by 10.6%,increases the post-fracturing stable-production period by 58.3%,and improves estimated ultimate recovery(EUR)by 15.6%.The method can effectively improve the scientific rigor and efficiency of fracturing-parameter optimization in strongly heterogeneous tight sandstone gas reservoirs and provides practical guidance for fracturing stimulation and development-benefit enhancement in reservoirs similar to the JH block.
This study systematically investigates the effects of the Cu atomic fraction on the mechanical properties and microscopic deformation mechanisms of FeNiCrCoCuₓ high-entropy alloys at 1 000 K using molecular dynamics simulations.The results show that,as the Cu atomic fraction increases,the yield stress decreases from 5.61 GPa to 4.99 GPa and Young's modulus decreases from 70.85 GPa to 53.86 GPa.In contrast,the fraction of atoms transformed from face-centered cubic(FCC)to hexagonal close-packed(HCP)structures decreases,while the frequency of dynamic recrystallization(DRX)increases significantly.The dislocation density is reduced,lattice distortion is relaxed,and the stress distribution becomes more uniform.Further analysis confirms that Cu addition lowers the stacking-fault energy and accelerates DRX,thereby markedly improving ductility without compromising high-temperature stability.These findings provide an atomic-scale theoretical basis for designing novel high-entropy alloys with both high strength and toughness and excellent heat resistance.
Numerical simulations were performed to investigate non-uniform heat transfer of hydrogen in U-shaped microchannels under supercritical conditions.The effects of heat flux and pressure on heat-transfer characteristics were analyzed,the mechanism of abnormal heat transfer in non-uniform heat-flux channels was revealed,and a heat-transfer prediction correlation was fitted.The results indicate that,owing to variations in thermophysical properties,pressure and heat flux exhibit opposite effects on heat-transfer enhancement in the heating and cooling channels.In the non-uniform cooling channel,centrifugal force and buoyancy produce a synergistic effect that significantly promotes heat transfer.In contrast,in the heating channel governed only by centrifugal force,non-uniform heating suppresses heat transfer.The findings provide an important reference for the design optimization and theoretical study of supercritical-fluid heat-transfer systems in hydrogen-related applications.
Small objects in UAV aerial images have low pixel proportions,are vulnerable to interference from complex backgrounds,and exhibit large scale variations,which often lead to missed detections and insufficient accuracy in existing methods.Therefore,an improved algorithm,YOLO11-RHO,is proposed for UAV aerial imagery based on YOLOv11.First,online convolutional re-parameterization(OREPA)with frequency-prior initialization is introduced into the backbone network to enhance the model's representation of high-frequency edge and texture information through spatial-frequency selectivity.Second,the RepNCSPELAN4_high module is used to optimize gradient propagation paths and construct a direct gradient pathway,thereby alleviating the attenuation of small-object features in deep network layers.Third,a hierarchical feature fusion block(HFFB)is integrated into the feature-fusion network.By combining a spatial-and channel-decoupled adaptive attention mechanism,the block strengthens small-object representation and achieves multiscale information alignment.Finally,the overall architecture is designed for lightweight real-time deployment.Comparative and ablation experiments on the VisDrone2019 dataset show that the improved model achieves excellent performance,with mAP@0.5=0.401 and mAP@0.50∶0.95=0.245.It also maintains a lightweight architecture with 6.22 M parameters and 15.1 GFLOPs,effectively balancing high detection accuracy with real-time edge-device operation and satisfying practical end-side deployment requirements.
UNet has been widely applied to image segmentation tasks due to its encoder-decoder structure and skip-connection mechanism.However,traditional downsampling operations(such as max pooling or average pooling)tend to cause loss of spatial detail information during feature compression,while the simple reconstruction approach of the upsampling stage struggles to fully model global contextual semantics.These limitations constrain the network's expressive power and segmentation accuracy.To address this,this paper proposes an enhanced UNet architecture by introducing the Interactive Pooling Module(IPM)and the Global-Local Feature Interaction Module(GLFIM)during subsampling and upscaling stages,respectively,to strengthen feature modeling capabilities.Results indicate that in the encoder,the IPM simultaneously integrates max-pooling and average-pooling branches.Through channel interaction and feature fusion,it effectively enhances feature representation capabilities while preserving more structural and statistical information.In the decoder,the proposed Local Block extracts local details through residual convolutions,while the Global Block combines an attention mechanism based on adaptive pooling with an MLP network to model long-range dependencies and global semantic context.Experimental results demonstrate that our method exhibits significant advantages in preserving critical details and enhancing global semantic understanding,achieving superior segmentation performance compared to the standard UNet model.On the WHU dataset,IoU and F1 scores reached 90.73%and 95.14%,respectively.