
ABSTRACT Sustainable hydrogen production from abundant natural water is severely hampered by the sluggish kinetics of the hydrogen evolution reaction (HER) in neutral media, a fundamental bottleneck for large‐scale water electrolysis. Herein, we report a novel synergistic strategy to circumvent this limitation by designing a platinum single‐atom catalyst supported on hexagonal tungsten oxide (Pt/ h ‐WO 3 ). Our theoretical and experimental results show that the H x WO 3 support acts as a lattice‐proton reservoir that captures and stores protons (H + ) from water within its lattice. The stored H + ions are subsequently utilized by the atomic Pt sites, which serve as catalytic sites that open a low‐energy pathway and bypass the high activation barrier of conventional water dissociation. This unique mechanism, directly verified by in situ Raman spectroscopy, endows the catalyst with strong acid‐like HER activity in neutral media, achieving an overpotential of only 22 mV at 10 mA cm −2 . This work establishes a powerful design principle that synergizes lattice‐level reactant storage with atomic‐level catalytic sites and offers a new paradigm for overcoming kinetic barriers in challenging electrochemical reactions.
ABSTRACT Electrocatalytic oxidation enables the sustainable conversion of biomass into high‐value chemicals and fuels. However, the field lacks a unified framework linking substrate molecular structures to catalyst design. Herein, biomass substrates are categorized by carbon chain length and structural complexity: C 2 –C 3 alcohols, C 5 –C 7 cyclic compounds, and C n biopolymers. This categorization identifies substrate‐specific reaction bottlenecks, such as the competition between C–C bond cleavage and C–O oxidation, and yields four generalized catalyst design principles, namely, optimizing intermediate adsorption, engineering synergistic multi‐type active sites, accelerating active‐site formation, and maximizing site exposure. Furthermore, the application of operando spectroscopy and machine learning is examined for resolving mechanistic ambiguities and accelerating materials discovery. Finally, this review assesses the macroscopic engineering bottlenecks restricting industrial translation, specifically downstream separation challenges, the limitations of alkaline electrolytes, and the requirements for rigorous techno‐economic and life‐cycle assessments. By bridging molecular‐level design with process engineering, this comprehensive synthesis provides a roadmap for scalable electrocatalytic biorefineries.
ABSTRACT Solar‐driven interfacial evaporation (SDIE) systems face critical challenges associated with volatile organic compound (VOC) contamination in condensate and salt accumulation. Herein, a photothermal–photocatalytic BiOBr/MXene nanocomposite evaporator is engineered via crystal‐facet engineering and biphasic structural design to enable the directional conversion of toluene into nonvolatile products. The melamine sponge‐hydrogel substrate integrates MXene (97.25% solar absorption) with reactive BiOBr(1 1 0) facets, achieving an evaporation rate of 2.42 kg m −2 h −1 under 1 sun irradiation while driving stepwise toluene oxidation. Within 1 h, toluene is selectively converted to benzaldehyde, followed by oxidation to benzoic acid over 12 h. In situ spectroscopy and density functional theory (DFT) calculations reveal that oxygen vacancies and Lewis acid sites on BiOBr(1 1 0) enhance toluene adsorption, whereas a built‐in electric field promotes photogenerated carrier separation, thereby facilitating radical‐chain reactions and suppressing VOC volatilization through conversion into high‐boiling‐point polar products. The biphasic structure further resists salt crystallization for 7 days in 14 wt.% brine through capillary‐swelling transport and dynamic salt regulation, concurrently enabling >99.999% heavy metal removal and phenol degradation efficiencies of up to 99.0%. This work proposes a “conversion‐over‐mineralization” strategy, synergizing high‐efficiency evaporation, salt resistance, and water safety for practical solar‐driven purification.
ABSTRACT Sustainable aviation fuel (SAF) plays an important role in reducing the carbon footprint of the aviation sector and supporting the global goal of net‐zero emissions. This review presents a clear and simple overview of current technologies used for SAF production and highlights key factors that influence their performance. Among different approaches, including thermo‐catalytic (TC), photocatalytic (PC), and photoelectrocatalytic (PEC) methods, the TC process has received the most attention due to its relatively advanced development and scalability. In TC systems, catalyst design is crucial. The type of metal (single or dual atom), its phase, dopants, supports, and promoters strongly affect reaction thermodynamics, kinetics, fuel selectivity, and overall conversion efficiency. However, the TC process still faces major challenges, such as high energy input requirements and low heat‐to‐fuel efficiency. These limitations restrict large‐scale industrial implementation. Another significant challenge is the direct conversion of carbon dioxide (CO2) and hydrogen (H2) into long‐chain hydrocarbons (C8–C16), which are suitable for jet fuel. The strong C═O bond in CO2 makes its activation and transformation into carbon radicals difficult, especially for forming multiple C–C and C–H bonds required for aviation fuel production. This review focuses on key process routes, including reverse water–gas shift (RWGS)–Fischer‐Tropsch (FT), methanol‐mediated, and CO2 electrolysis–FT pathways, with an emphasis on optimizing operating conditions, improving energy efficiency, and advancing catalyst design for continuous and scalable SAF production. It further summarizes recent developments in TC systems and highlights future research directions aimed at accelerating progress in SAF technologies.
ABSTRACT Fe‐doping is a well‐known strategy to enhance the oxygen evolution reaction (OER) activity of Ni‐based electrocatalysts, although the mechanism by which this occurs is widely debated. In this study, we use soft X‐ray absorption spectroscopy (sXAS) to demonstrate that Ni/Fe synergy in the double perovskite BaSrNi0.9Fe0.1WO6 (BSNFW) promotes O(2p) orbital hybridization with B‐site transition metals. Through bridging O species, favorable electronic interactions between Ni and Fe induce an accelerated surface reconstruction that generates a high concentration of OER‐active Ni3+ species in situ. Consequently, BSNFW shows remarkable OER performance with a Tafel slope of just 38 mV dec−1 and a low OER overpotential of ∼280 mV at a current density of 10 A g−1. Moreover, the intrinsic OER‐activity of BSNFW (measured by the catalytic turnover frequency) is enhanced by two times compared to that of un‐doped BaSrNiWO6 (BSNW), while the extent of W leaching is reduced by 30%. These findings show that Fe‐doping can tune the surface chemistry of Ni‐based electrocatalysts to accelerate the formation of OER‐active sites, enhance their kinetic activity, and increase surface stability.