
This paper describes the development and test of a novel LiDAR based combine harvester steering system using a harvest scenario and sensor point cloud simulation together with an established simulation toolchain for embedded software development. For a realistic sensor behavior simulation, considering the harvesting environment and the sensor mounting position, a phenomenological approach was chosen to build a multilayer LiDAR model at system level in Gazebo and ROS. A software-in-the-loop simulation of the mechatronic steering system was assembled by interfacing the commercial AppBase framework for point cloud processing and feature detection algorithms together with a machine model and control functions implemented in MATLAB/ Simulink. A test of ECUs in a hardware-in-the-loop simulation and as well as HMI elements in a driver-in-the-loop simulation was achieved by using CAN hardware interfaces and a CANoe based restbus simulation.
Powertrains for mobile applications need to fulfil various requirements regarding functionality, efficiency, and emissions. Mechanical and hydraulic drive components are still the most used drive technologies in mobile applications, due to their power density. Despite the known drawbacks in this regard, electric drives are used in various machines (e.g. forklifts, dumpers) to take advantage of such benefits as low maintenance costs, local emissions, and good controllability [1]. Current disadvantages, such as power density and component costs are weakening, due to intensive development work on electric drives. As a result, another drive technology has to be taken into account when developing mobile machines. This leads to an increasing complexity for developers and to the question addressed in this article, if and how an adapted development method can support future development work. Developments in mobile applications are moving towards electrically driven machines to reduce emissions. However, until now electrical components have rarely found their way into mobile applications, often due to their lower power density compared to hydraulic actuators. Some of these disadvantages can be accepted to reduce maintenance effort or reduce local emissions with electric drives. The disadvantage of higher component costs is expected to diminish, due to current developments in the automotive industry. However, the hydraulic technology is often the only possible solution for some applications (e.g. translational movements), and the supposed low efficiency of hydraulic drives has been put into question in various studies [2, 3]. Continuous variable transmission (CVT) concepts show that the biggest benefit can be achieved by combining different drive technologies to use technology based benefits. Neither electric, hydraulic nor mechanical actuation can be neglected in future development processes. Each technology has its benefits to improve current drive concepts. The big challenge is to manage the increasing complexity.