Mini-EUSO is a wide Field-of-View (FoV, 44$^{\circ}$) telescope currently in operation from a nadia-facing UV-transparent window in the Russian Zvezda module on the International Space Station (ISS). It is the first detector of the JEM-EUSO program deployed on the ISS, launched in August 2019. The main goal of Mini-EUSO is to measure the UV emissions from the ground and atmosphere, using an orbital platform. Mini-EUSO is mainly sensitive in the 290-430 nm bandwidth. Light is focused by a system of two Fresnel lenses of 25 cm diameter each on the Photo- Detector-Module (PDM), which consists of an array of 36 Multi-Anode Photomultiplier Tubes (MAPMTs), for a total of 2304 pixels working in photon counting mode, in three different time resolutions of 2.5 ${\mu}$s, 320 ${\mu}$s, 40.96 ms operation in parallel. In the longest time scale, the data is continuously acquired to monitor the UV emission of the Earth. It is best suited for the observation of ground sources and therefore has been used for the observational campaigns of the Mini-EUSO. In this contribution, we present the assembled UV flasher, the operation of the field campaign and the analysis of the obtained data. The result is compared with the overall efficiency computed from the expectations which takes into account the atmospheric attenuation and the parameterization of different effects such as the optics efficiency, the MAPMT detection efficiency, BG3 filter transmittance and the transparency of the ISS window.

Context. Observations of meteors in the Earth's atmosphere offer a unique tool for determining the flux of meteoroids that are too small to be detected by direct telescopic observations. Although these objects are routinely observed from ground-based facilities, such as meteor and fireball networks, space-based instruments come with notable advantages and have the potential to achieve a broad and uniform exposure. Aims. In this paper, we describe the first observations of meteor events with Mini-EUSO, a very wide field-of-view telescope launched in August 2019 from the Baikonur cosmodrome and installed on board the Russian Zvezda module of the International Space Station. Mini-EUSO can map the night-time Earth in the near-UV range (290-130 nm) with a field of view equal to 44 degrees x 44 degrees and a spatial resolution of about 4.7 km at an altitude of 100 km from the ground. The detector saves triggered transient phenomena with a sampling frequency of 2.5 mu s and 320 mu s, as well as a continuous acquisition at 40.96 ms scale that is suitable for meteor observations. Methods. We designed two dedicated and complementary trigger methods, together with an analysis pipeline able to estimate the main physical parameters of the observed population of meteors, such as the duration, horizontal speed, azimuth, and absolute magnitude. To compute the absolute flux of meteors from Mini-EUSO observations, we implemented a simulation framework able to estimate the detection efficiency as a function of the meteor magnitude and the background illumination conditions. Results. The instrument detected 24 thousand meteors within the first 40 data-taking sessions from November 2019 to August 2021, for a total observation time of approximately 6 days with a limiting absolute magnitude of +6. Our estimation of the absolute flux density of meteoroids in the range of mass between 10(-5) kg to 10(-1) kg was found to be comparable to other results available in the literature. Conclusions. The results of this work prove the potential for space-based observations to increase the statistics of meteor observations achievable with instruments operating on the ground. The slope of the mass distribution of meteoroids sampled with Mini-EUSO suggests a mass index of either s = 2.09 +/- 0.02 or s = 2.31 +/- 0.03, according to two different methodologies for the computation of the pre-atmospheric mass starting from the luminosity of each event.

More than three dozen submillisecond events of ELVES type (“elves”), which are the result of the interaction of the front of an electromagnetic pulse from a lightning discharge and the lower layer of the ionosphere, have been identified in the data of a UV Atmosphere orbital multichannel detector (Mini-EUSO). Each event has a characteristic annular glow pattern and occupies a significant part of the detector’s field of view, and the signal in a separate channel has an asymmetric profile with a pronounced peak. The distribution of peak times contains information about both the localization of the discharge and the altitude of the glow. In this paper, we propose a Bayesian (probabilistic) model for reconstructing ELVES events, implemented using probabilistic programming methods in PyMC-5. The capabilities of the model for determining the position of the discharge are shown using the example of several events. Methods for modifying the model to restore the discharge orientation and refine the glow height are outlined.

The complexity of modern cosmic ray observatories and the rich data sets they capture often require a sophisticated software framework to support the simulation of physical processes, detector response, as well as reconstruction and analysis of real and simulated data. Here we present the EUSO-(Off) over bar(line) under bar framework. The code base was originally developed by the Pierre Auger Collaboration, and portions of it have been adopted by other collaborations to suit their needs. We have extended this software to fulfill the requirements of Ultra-High Energy Cosmic Ray detectors and very high energy neutrino detectors developed for the Joint Exploratory Missions for an Extreme Universe Observatory (JEM-EUSO). These path-finder instruments constitute a program to chart the path to a future space-based mission like POEMMA. For completeness, we describe the overall structure of the framework developed by the Auger collaboration and continue with a description of the JEM-EUSO simulation and reconstruction capabilities. The framework is written predominantly in modern C++ (compliled against C++17) and incorporates third-party libraries chosen based on functionality and our best judgment regarding support and longevity. Modularity is a central notion in the framework design, a requirement for large collaborations in which many individuals contribute to a common code base and often want to compare different approaches to a given problem. For the same reason, the framework is designed to be highly configurable, which allows us to contend with a variety of JEM-EUSO missions and observation scenarios. We also discuss how we incorporate broad, industry-standard testing coverage which is necessary to ensure quality and maintainability of a relatively large code base, and the tools we employ to support a multitude of computing platforms and enable fast, reliable installation of external packages. Finally, we provide a few examples of simulation and reconstruction applications using EUSO-(Off) over bar(line) under bar.

EUSO-TA is a ground-based fluorescence telescope built to validate the design of ultra-high energy cosmic ray fluorescence detectors to be operated in space with the technology developed within the Joint Exploratory Missions for Extreme Universe Space Observatory (JEM-EUSO) program. It operates at the Telescope Array (TA) site in Utah, USA. With an external trigger provided by the Black Rock Mesa fluorescence detectors of the Telescope Array experiment, with EUSO-TA we observed air-showers from ultra-high energy cosmic rays, as well as laser events from the Central Laser Facility at the TA site and from portable lasers like the JEM-EUSO Global Light System prototype. Since the Black Rock Mesa fluorescence detectors have a ∼30 times larger field of view than EUSO-TA, they allow a primary energy reconstruction based on the observation of a large part of the shower evolution, including the shower maximum, while EUSO-TA observes only a part of it, usually far away from the maximum. To estimate the detection limits of EUSO-TA in energy and distance, a method was developed to re-scale their energy, taking into account that EUSO-TA observes only a portion of the air-showers. The method was applied on simulation sets with showers with different primaries, energy, direction, and impact point on the ground, as well as taking into account the experimental environment. EUSO-TA was simulated with an internal trigger and different elevation angles and electronics. The same method was then applied also to real measurements and compared to the simulations. In addition, the method can also be used to estimate the detection limits for experiments that are operated at high altitudes and in most cases can see the maximum of the showers. This was done for EUSO-SPB1, an instrument installed on a super-pressure balloon. Finally, the expected detection rates for EUSO-TA were also assessed using the prepared simulated event sets. The rates correspond to a few detections per recording session of 30 h of observation, depending on the background level and the configuration of the detector.

The data have been acquired with the Mini-EUSO detector, an UV telescope operating in the range 290-430 nm and located inside the International Space Station. The detector was launched in August 2019, and it has started operations from the nadir-facing UV-transparent window in the Russian Zvezda module in October 2019. The data presented here refer to 32 sessions acquired between 2019-11-19 and 2021-05-06. The instrument consists of a Fresnel-lens optical system and a focal surface composed of 36 multi-anode photomultiplier tubes, each with 64 channels, for a total of 2304 channels with single photon counting sensitivity. The telescope, with a square field-of-view of 44 degrees, has a spatial resolution on the Earth surface of 6.3 km and saves triggered transient phenomena with a temporal resolution of 2.5 mu s and 320 mu s. The telescope also operates in continuous acquisition at a 40.96 ms scale. In this article, large-area night-time UV maps obtained processing the 40.96 ms data, taking averages over regions of some specific geographical areas (e.g., Europe, North America) and over the entire globe, are presented. Data are binned into 0.1 degrees x 0.1 degrees or 0.05 degrees x 0.05 degrees cells (depending on the scale of the map) over the Earth's surface. Raw data are made available in the form of tables (latitude, longitude, counts) and.kmz files (containing the.png images). These are - to the best of our knowledge - the highest sensitivity data in this wavelength range and can be of use to various disciplines. (C) 2023 The Author(s). Published by Elsevier Inc.

This is a collection of papers presented by the JEM-EUSO Collaboration at the 38th International Cosmic Ray Conference (Nagoya, Japan, July 26-August 3, 2023)

The INFN Rome group has been developing the ArduSiPM technology since 2012, which is an allin-one detector that uses SiPM, analog electronics, and SoC to count events and measure SiPM signal amplitude and time-of-arrival. The first-generation ArduSiPM was powered by the Arduino Due processor, an 84 MHz SAM3X8E Cortex-M3 RISC, and was highly flexible, allowing for continuous firmware updates and optimal resource usage. With the improvements in SoCs and SiPMs, second and third-generation detectors were constructed, providing enhanced precision and space efficiency.The new internal analog design of the SoCs and higher clock frequencies enabled a half-photon threshold and a time-of-arrival measurement precision of 6 ns. These detectors are perfect for onfield and space applications due to their small size, low weight, and low power consumption. The second-generation Cosmo ArduSIPM detectors have two SAMV71 Cortex-M7 RISC 300 MHz processors integrated into a 10x10 cm2 CubeSat form factor on a two-channel board weighing just 40 grams. The third generation, called Nano ArduSiPM, is under development to benefit from new TFPGA packages, which reduce the weight and size of the electronics, building a single-channel module with a form factor of picosatellites measuring just 5x5 cm2.This paper aims to demonstrate the performance of the new-generation detectors and compare them to the first-generation detectors. The analog and digital parts of the detectors have been optimized to enhance signals with a few photons, and edge computing processes are utilized to minimize data throughput to external communication devices, which is vital where throughput must be optimized, like space application.

JEM-EUSO is an international program for the development of space-based Ultra-High Energy Cosmic Ray observatories. The program consists of a series of missions which are either under development or in the data analysis phase. All instruments are based on a wide-field-of-view telescope, which operates in the near-UV range, designed to detect the fluorescence light emitted by extensive air showers in the atmosphere. We describe the simulation software ESAF in the framework of the JEM-EUSO program and explain the physical assumptions used. We present here the implementation of the JEM-EUSO, POEMMA, K-EUSO, TUS, Mini-EUSO, EUSO-SPB1 and EUSO-TA configurations in ESAF. For the first time ESAF simulation outputs are compared with experimental data.

The Trigger Logic (TL) of the Tracking Ultraviolet Setup (TUS) and Multiwavelength Imaging New Instrument for the Extreme Universe Space Observatory (Mini-EUSO) space-based projects of the Joint Experiment Missions-EUSO (JEM-EUSO) program is summarized. The performance results on the search for Ultra-High Energy Cosmic Rays (UHECRs) are presented.

Mini-EUSO is a high-sensitivity imaging telescope that observes the Earth from the ISS in the near ultraviolet band (290 ÷ 430 nm), through the nadir-facing, UV-transparent window in the Russian Zvezda module. The instrument, launched in 2019, has a field of view of 44 ^∘ , a spatial resolution on the Earth’s surface of 6.3 km and a temporal sampling rate of 2.5 microseconds. Thanks to its triggering and on-board processing, the telescope is capable of detecting UV emissions of cosmic, atmospheric, and terrestrial origin on different time scales, from a few microseconds up to tens of milliseconds. The optics is composed of two Fresnel lenses focusing light onto an array of 36 Hamamatsu Multi-Anode PhotoMultiplier Tubes, for a total of 2304 pixels. The telescope also contains two cameras in the near-infrared and visible, an 8-by-8 array of Silicon-PhotoMultipliers and a series of UV sensors to manage night-day transitions. The scientific objectives range from the observation of atmospheric phenomena [lightning, Transient Luminous Events (TLEs), ELVES], the study of meteoroids, the search of interstellar meteoroids and strange quark matter, mapping of the Earth’s nocturnal emissions in the ultraviolet range, and the search of cosmic rays with energy above 10 ^21 eV. The instrument has been integrated and qualified in 2019, with the final tests in Baikonur prior to its launch. Operations involve periodic installation in the Zvezda module of the station with observations during the crew night time, with periodic downlink of data samples, with the full data being sent to the ground via pouches containing the data disks. Mission planning involves the selection of the optimal orbits to maximize the scientific return of the instrument. In this work, we will describe the various phases of construction, testing, and qualification prior to the launch and the in-flight operations of the instrument on board the ISS.

The Mini-EUSO telescope was launched for the International Space Station on August 22nd, 2019 to observe from the ISS orbit (-400 km altitude) various phenomena occurring in the Earth's atmosphere through a UV-transparent window located in the Russian Zvezda Module. Mini-EUSO is based on a set of two Fresnel lenses of 25 cm diameter each and a focal plane of 48x48 pixels, for a total field of view of 44 degrees. Until July 2021, Mini-EUSO performed a total of 41 data acquisition sessions, obtaining UV images of the Earth in the 290 nm - 430 nm band with temporal and spatial resolution on ground of 2.5 ls and 6.3x6.3 km2, respectively. The data acquisition was performed with a 2.5 ls sampling rate, using a dedicated trigger looking for signals with a typical duration of tens of ls.In the present paper the analysis of the performance of the 2.5 ls trigger logic is presented, with a focus on the method used for the analysis and the categories of triggered events. The expected functioning of the trigger logic has been confirmed, with the trigger rate on spurious events that remains within the requirements in nominal background conditions. The trigger logic detected several different phe-nomena, including lightning strikes, elves, ground-based flashers and events with EAS-like characteristics. (c) 2022 COSPAR. Published by Elsevier B.V. All rights reserved.

Mini-EUSO is a small orbital telescope with a field of view of $44^{\circ}\times 44^{\circ}$, observing the night-time Earth mostly in 320-420 nm band. Its time resolution spanning from microseconds (triggered) to milliseconds (untriggered) and more than $300\times 300$ km of the ground covered, already allowed it to register thousands of meteors. Such detections make the telescope a suitable tool in the search for hypothetical heavy compact objects, which would leave trails of light in the atmosphere due to their high density and speed. The most prominent example are the nuclearites -- hypothetical lumps of strange quark matter that could be stabler and denser than the nuclear matter. In this paper, we show potential limits on the flux of nuclearites after collecting 42 hours of observations data.

Mini-EUSO is a telescope launched on board the International Space Station in 2019 and currently located in the Russian section of the station. Main scientific objectives of the mission are the search for nuclearites and Strange Quark Matter, the study of atmospheric phenomena such as Transient Luminous Events, meteors and meteoroids, the observation of sea bioluminescence and of artificial satellites and man-made space debris. It is also capable of observing Extensive Air Showers generated by Ultra-High Energy Cosmic Rays with an energy above 10$^{21}$ eV and detect artificial showers generated with lasers from the ground. Mini-EUSO can map the night-time Earth in the UV range (290 - 430 nm), with a spatial resolution of about 6.3 km and a temporal resolution of 2.5 $\mu$s, observing our planet through a nadir-facing UV-transparent window in the Russian Zvezda module. The instrument, launched on 2019/08/22 from the Baikonur cosmodrome is based on an optical system employing two Fresnel lenses and a focal surface composed of 36 Multi-Anode Photomultiplier tubes, 64 channels each, for a total of 2304 channels with single photon counting sensitivity and an overall field of view of 44$^{\circ}$. Mini-EUSO also contains two ancillary cameras to complement measurements in the near infrared and visible ranges. In this paper we describe the detector and present the various phenomena observed in the first year of operation.

The TurLab facility is a laboratory, equipped with a 5 m diameter and 1 m depth rotating tank, located in the fourth basement level of the Physics Department of the University of Turin. In the past years, we have used the facility to perform experiments related to the observations of Extreme Energy Cosmic Rays (EECRs) from space using the fluorescence technique for JEM- EUSO missions with the main objective to test the response of the trigger logic. In the missions, the diffuse night brightness and artificial and natural light sources can vary significantly in time and space in the Field of View (FoV) of the telescope. Therefore, it is essential to verify the detector performance and test the trigger logic under such an environment. By means of the tank rotation, a various terrestrial surface with the different optical characteristics such as ocean, land, forest, desert and clouds, as well as artificial and natural light sources such as city lights, lightnings and meteors passing by the detector FoV one after the other is reproduced. The fact that the tank located in a very dark place enables the tests under an optically controlled environment. Using the Mini-EUSO data taken since 2019 onboard the ISS, we will report on the comparison between TurLab and ISS measurements in view of future experiments at TurLab. Moreover, in the forthcoming months we will start testing the trigger logic of the EUSO-SPB2 mission. We report also on the plans and status for this purpose.

Mini-EUSO is a mission of the JEM-EUSO program flying onboard the International Space Station since August 2019. Since the first data acquisition in October 2019, more than 35 sessions have been performed for a total of 52 hours of observations. The detector has been observing Earth at night-time in the UV range and detected a wide variety of transient sources all of which have been modeled through Monte Carlo simulations. Mini-EUSO is also capable of detecting meteors and potentially space debris and we performed simulations for such events to estimate their impact on future missions for cosmic ray science from space. We show here examples of the simulation work done in this framework to analyze the Mini-EUSO data. The expected response of Mini-EUSO with respect to ultra high energy cosmic ray showers has been studied. The efficiency curve of Mini-EUSO as a function of primary energy has been estimated and the energy threshold for Cosmic Rays has been placed to be above 10(21) eV. We compared the morphology of several transient events detected during the mission with cosmic ray simulations and excluded that they can be due to cosmic ray showers. To validate the energy threshold of the detector, a system of ground based flashers is being used for end-to-end calibration purposes. We therefore implemented a parameterization of such flashers into the JEM-EUSO simulation framework and studied the response of the detector with respect to such sources.

Mini-EUSO is the first detector of the JEM-EUSO program deployed on the ISS. It is a wide field of view telescope currently operating from a nadir-facing UV-transparent window on the ISS. It is based on an array of MAPMTs working in photon counting mode with a 2.5 μs time resolution. Among the different scientific objectives it searches for light signals with time duration compatible to those expected from Extensive Air Showers (EAS) generated by EECRs interacting in the atmosphere. Although the energy threshold for cosmic ray showers is above $E > 10^{21} eV$, due the constraints given by the size of the UV-transparent window, the dedicated trigger logic has been capable of the detection of other interesting classes of events, like elves and ground flashers. An overview of the general performance of the trigger system is provided, with a particular focus on the identification of classes of events responsible for the triggers.

We describe some applications of SiPMs developed for space-borne detectors to be employed in astroparticle physics research. SiPMs were first installed in space in 2005 on board of the International Space Station (ISS) in the Lazio-Sirad experiment. In Lazio-Sirad the SiPMs have been used as sensors of a small calorimeter to measure radiation environment in space and assess the effectiveness of shielding for astronauts. More recently, a 64 pixel array of SiPMs was used in Mini-EUSO, an UV telescope to study UV terrestrial emissions. Mini-EUSO was launched in Summer 2019 on board the ISS and is observing the Earth from a nadir facing window in the Russian section of the station. The detector technology and readout electronics developed in these contexts can also be employed in ground-based applications, both in research and in technological transfer implementations. As an example, we also discuss the application of SiPM detectors developed for EUSO detectors in the development of Lanfos, a detector to assess the amount of Cesium in food produced in the regions affected by the 2011 Fukushima power plant accident.

Mini-EUSO will observe the Earth in the UV range (300 - 400 nm) offering the opportunity to study a variety of atmospheric events such as Transient Luminous Events (TLEs), meteors and marine bioluminescence. Furthermore it aims to search for Ultra High Energy Cosmic Rays (UHECR) above $10^{21}$ eV and Strange Quark Matter (SQM). The detector is expected to be launched to the International Space Station in August 2019 and look at the Earth in nadir mode from the UV-transparent window of the Zvezda module of the International Space Station. The instrument comprises a compact telescope with a large field of view ($44^{\circ}$), based on an optical system employing two Fresnel lenses for light collection. The light is focused onto an array of 36 multi-anode photomultiplier tubes (MAPMT), for a total of 2304 pixels and the resulting signal is converted into digital, processed and stored via the electronics subsystems on-board. In addition to the main detector, Mini-EUSO contains two ancillary cameras for complementary measurements in the near infrared (1500 - 1600 nm) and visible (400 - 780 nm) range and also a 8x8 SiPM imaging array.