(SVD-2 Collaboration) A. G. Afonin, E. N. Ardashev, V. F. Golovkin, S. N. Golovnya, S. A. Gorokhov, A. A. Kiryakov, A. G. Kholodenko, V. V. Konstantinov, L. L. Kurchaninov, I. S. Lobanov, E. V. Lobanova, G. A. Mitrofanov, V. S. Petrov, A. V. Pleskach, M. K. Polkovnikov, V. N. Riadovikov*, V. N. Ronzhin, V. A. Senko,N. A. Shalanda, M. M. Soldatov, Yu. P. Tsyupa, A. P. Vorobiev, V. I. Yakimchuk, and V. N. Zapolskii∗ IHEP, Protvino, Moscow region, Russia.

The results of an analysis of data from the SERP-Е-184 experiment devoted to studying mechanisms of the production of charmed particles in proton–nucleus interactions at 70 GeV and their decays are presented. The data in question were obtained upon irradiating the SVD-2 active target consisting of carbon, silicon, and lead plates with a beam of 70-GeV protons. A detailed simulation on the basis of the FRITIOF7.02 and GEANT3.21 code packages made it possible to optimize event-selection criteria and to calculate the detection efficiency for Λ c + baryons. After selecting a signal from the threebody decay of a Λ c + baryon, the inclusive cross section for its production at near-threshold energies, its lifetime, and the parameter of the A dependence of the cross section were found. The Λ c + -baryon yields are tabulated along with data from other experiments and theoretical predictions.

Описана конструкция калориметра мягких фотонов установки СВД-2. Апертура прибора 210 × 210 мм. Приведены первые результаты его испытания в ходе физического набора статистики в эксперименте E-190 на ускорителе У-70 ИФВЭ.

The design of the soft photon calorimeter for the SVD-2 experiment is described. The aperture of the calorimeter is 210 × 210 mm. The first results of its testing in the course of data acquisition in the E-190 experiment at the U-70 accelerator of the Institute for High Energy Physics are presented.

The stages of development and the current status of the versatile “Spectrometer with a Vertex Detector” setup designed for physics experiments at the U-70 accelerator of the Institute for High Energy Physics (Protvino) is described. The main detectors of the setup are the vertex detector based on silicon microstrip detectors, the wide-aperture magnetic spectrometer based on multiwire proportional chambers, and the lead-glass hodoscope γ detector. In the setup, there is a fast two-level trigger system for selecting required particle interactions. The key characteristics of the setup systems are presented, and the physical results obtained on it are briefly listed.

The stages of development and the current status of the versatile “Spectrometer with a Vertex Detector” setup designed for physics experiments at the U 70 accelerator of the Institute for High Energy Physics (Protvino) is described. The main detectors of the setup are the vertex detector based on silicon microstrip detectors, the wide aperture magnetic spectrometer based on multiwire proportional chambers, and the lead glass hodoscope γ detector. In the setup, there is a fast two level trigger system for selecting required particle interactions. The key characteristics of the setup systems are presented, and the physical results obtained on it are briefly listed. DOI: 10.1134/S0020441212060012

Описаны этапы развития и современное состояние многоцелевой установки “Спектрометр с вершинным детектором”, созданной для проведения физических экспериментов на ускорителе У-70 Института физики высоких энергий (Протвино). Основными детекторами установки являются: вершинный детектор на основе кремниевых микростриповых детекторов, широкоапертурный магнитный спектрометр на основе пропорциональных камер, годоскопический детектор -квантов, собранный из свинцовых стекол. Для отбора нужных взаимодействий частиц в установке имеется быстродействующая двухуровневая система запуска. Приведены основные характеристики созданных систем установки, кратко перечислены полученные физические результаты.

The Thermalization project is currently under way on the extracted proton beam of the U-70 accelerator at the Institute for High Energy Physics. The main goal of this experiment is to study the collective behavior of secondary particles produced in a multiparticle pp interaction at beam energy E = 50–70 GeV. The region of high charged-particle multiplicities n ch ≥ 10 is investigated. In this region, a significant portion of energy in the center-of-mass system is dissipated on production of secondary particles, which results in formation of a hadronic system. At the initial instant of evolution, the density of this system is high, which may be responsible for the collective behavior of the secondary particles. The investigations are performed at the SVD-2 wide-aperture magnetic spectrometer. A multichannel trigger scintillation hodoscope used to select rare events with a large number of charged particles exceeding the predetermined value is described. The main flow of low-multiplicity events is suppressed by the trigger system by a factor of ∼102.

The design and the characteristics of a drift tracker for the SVD-2 setup at the U-70 accelerator of the Institute for High Energy Physics (Protvino, Russia) are described. The drift tracker has been developed to improve the quality of track reconstruction in high-multiplicity events. It is composed of 2304 drift tubes with a diameter of 6 mm and a sensitive region 500–900 mm long. The distance between a track and the anode wire is determined from the drift time. The coordinate resolution and the detection efficiency of the tubes have been determined from the data of the accelerator run in 2006.

Описывается прецизионный вершинный микростриповый детектор, созданный для установки “Спектрометр с вершинным детектором”, на которой исследуются свойства адронов и короткоживущих нестабильных частиц на ускорителе ГНЦ “Институт физики высоких энергий”. Приведены структура, конструкция и технология изготовления основных компонентов детектора – микростриповых сенсоров и активной мишени; описываются также электроника съема и регистрации сигналов, система сбора данных и ее программное обеспечение. Точность определения положения вершин составляет 70–250 мкм вдоль оси пучка и 8–15 мкм – поперек оси при быстродействии 500–1000 событий/с.

A precision vertex microstrip detector has been developed for the spectrometer with a vertex detector (SVD) setup on which the properties of hadrons and short-lived unstable particles are investigated on the accelerator of the Institute for High Energy Physics. The structure and the design of the main detector components—microstrip sensors and an active target—are presented, as well as techniques for manufacturing them. The readout electronics, the data acquisition system, and its software are also described. The accuracy in determining the vertex position is 70–250 µm along the beam axis and 8–15 µm in a transverse direction at a throughput of 500–1000 events/s.

Electronic equipment developed for reading, shaping, and recording signals from microstrip sensors of the vertex detector of the SVD-2 setup is described. The configuration of the vertex detector sensors, construction of signal-reading cards, and structure and functions of the recording modules are considered. The obtained characteristics are analyzed.