Measurements on the sodium/salt concentration in a food biopolymer have been conducted using a low-resolution NMR spectrometer tuned to the sodium nucleus. Whilst being a relatively insensitive technique, this approach is an environmentally friendly alternative to existing methods and provides the potential for additional information on the state of sodium in food biopolymers and products. Part of the sodium signal is missing when sodium is in the presence of charged polymeric material, such as gluten. It is proposed that the signal loss is due to some form of immobilisation of the sodium causing changes in either the T1 or T2 or both relaxation constants rendering part of the signal unable to be recorded. Further work is required to differentiate between the possible mechanisms. Specifically, calculating the missing fraction as a function of recycle delay time will help determine the responsible factor. A tentative model is proposed, which, based on the missing signal, demonstrates a method for calculating the sodium/salt added with the polymer (Sg), and a partitioning factor (P) of sodium between the solid (signal absent) and the aqueous (signal present) phases. A systematic experiment was conducted with a mixture of wheat gluten and salt to demonstrate the proposed method.

The flavour of tea as a worldwide popular beverage has been studied extensively. This study aimed to apply established flavour analysis techniques (GC-MS, GC-O-MS and APCI-MS/MS) in innovative ways to characterise the flavour profile of oolong tea infusions for two types of oolong tea (type A- Shuixian, type B- Rougui). GC-MS identified 48 aroma compounds, with type B having a higher abundance of most compounds. GC-O-MS analysis determined the noticeable aroma difference based on 20 key aroma compounds, facilitating the creation of an analytical "Aroma Wheel" with 8 key odour descriptors. APCI-MS/MS assessed real-time aroma release during successive brews linked with the "Chinese tea ceremony" (Gongfu Cha). Multivariate Polynomial Regression (MPR) and Long Short-Term Memory (LSTM) network approaches were applied to aroma and colour data from seven successive brews. The results revealed a progressive decline in both colour and aroma with seven repeated brews, particularly notable after the fourth brew.

Tilapia is a freshwater fish group with a sustainable prospect but suffers off-notes appearing during cooking processes. To promote pleasant odorants by thermal cooking processes, tilapia fillets were cooked in different ways (roasting, microwave-heating, boiling and steaming). Their aroma profiles were analysed with special focus on off-notes and umami-enhancing odorants by principal component analysis, and correlated with the heating time, colour, moisture and water activity by partial least squares regression analysis. Results showed that the “green” and “earthy” off-notes were highly correlated with the boiling process (excess of water, short heating time), while most of the umami-enhancing odorants had a high association with the roasting process (low water content, long heating time, better Maillard reaction). This study indicated that roasting is the most adapted cooking process promoting Maillard-derived aromas, umami-enhancing aromas and meanwhile, reducing off-notes. This research helps in understanding the off-note generation in tilapia and promoting desirable umami-enhancing odorants.

Flavor molecules belong to different chemical classes, and possess various sensory properties. They are present in the foods, but in order to reach the sensory receptors they have to be released in the saliva during the eating process and for aroma compounds in the air phase from the oral to the nasal cavity. This chapter will present an overview of the different aroma and taste compounds, their dynamic release from the food matrix into the saliva and the oronasal cavity, taking into account the in-mouth physiological process, and the influence on flavor perception. In-mouth flavor compound release and flavor perception are very complex phenomena which are not well understood yet. The properties of the food matrix and oral physiological characteristics and their interactions are the main drivers for interindividual variability. The development of mechanistic models allowed a better understanding of the release of aroma and taste compounds during the eating process. However, the release behavior does not always explain sensory perception, due to other physiological mechanisms at the central and peripheral levels.

SummaryBuffering capacity (BC) is one of the important quality parameters of wort. In this study, the effect of single amino acids on brewing wort pH and its influence in wort BC were investigated. A beer sweet wort (BSW) was used as a control. A synthetic sweet wort (SSW) and synthetic sweet wort without amino acids (SSWNA) were prepared for a general comparison due to its absence of peptides. BC was conducted by the addition of hydrochloric acid. Results showed that a BSW and a SSW differed in their BC because SSW did not contain small peptides/peptides/polypeptides; SSWNA lost its BC severely due to its absence of nitrogenous compounds. Among all amino acids, arginine, and glutamic acid presented a higher influence in initial pH. However, aspartic acid wort demonstrated the best BC; therefore, this amino acid can be used to control the BC of brewers wort.

Summary Many Dendrobium orchid stems are used in Traditional Chinese Medicine (TCM). The most popular and premium species is Dendrobium officinale, and its stem in TCM is called Tiepishihu. Tiepishihu has a sweet flavour and is an ingredient in Chinese tea and desserts. There is no comprehensive understanding of its flavour compounds. It is, therefore, essential to understand compounds responsible for its flavour, and how they are formed. This review assesses twelve diverse studies in Tiepishihu flavour (2013–2022). Thirty aroma compounds were compared – furfural and nonanal were identified as common compounds. Four of seven essential amino acids were taste‐active, with lysine being the most potent. Pre‐harvest factors such as environment impact specific aroma compounds. Post‐harvest processing methods, including drying and grinding, can control Tiepishihu's flavour. Methodological consistency is a challenge, but controlling Tiepishihu's flavour could increase its commercial value as a food ingredient.

Capsaicin increases saliva production, but the impact of this additional saliva on the food matrix is unknown. This study aimed to explain the impact of capsaicin on saliva properties and in-vivo release of 14 aroma compounds in aqueous [aqu] and oil systems [oil]. To investigate the physicochemical effect from diverse properties of aroma compounds, one healthy subject participated in all the sessions to minimise large variations between individuals. Capsaicin enhanced saliva flow rate (by 172% [aqu] and 85% [oil]) and salivary protein concentration (by 142% [aqu] and 149% [oil]). Furthermore, capsaicin-in-oil stimulated saliva formed a more stable emulsion in the mouth (17% higher zeta-potential and 15% smaller particle size). In-nose release concentrations measured by APCI-MS for certain esters were reduced by capsaicin (e.g., isoamyl acetate was reduced by 65% [aqu] and 76% [oil]), which suggests that capsaicin may induce stronger oral interactions between specific aroma compounds and salivary proteins.

Due to unique characteristics, umami substances have gained much attention in the food industry during the past decade as potential replacers to sodium or fat to increase food palatability. Umami is not only known to increase appetite, but also to increase satiety, and hence could be used to control food intake. Therefore, it is important to understand the mechanism(s) involved in umami taste perception. This review discusses current knowledge of the mechanism(s) of umami perception from receptor level to human brain imaging. New findings regarding the molecular mechanisms for detecting umami tastes and their pathway(s), and the peripheral and central coding to umami taste are reviewed. The representation of umami in the human brain and the individual variation in detecting umami taste and associations with genotype are discussed. The presence of umami taste receptors in the gastrointestinal tract, and the interactions between the brain and gut are highlighted. The review concludes that more research is required into umami taste perception to include not only oral umami taste perception, but also the wider "whole body" signaling mechanisms, to explore the interaction between the brain and gut in response to umami perception and ingestion.

The release mechanism of odorants in the oral cavity during consumption directly affects sensory attributes, consumers' preferences, and ultimately purchase intent. Targets was set to monitor in real-time the key odorants released from grilled eel during mastication via an atmospheric pressure chemical ionization mass spectrometry (APCI-MS) connected with a nose interface. The release and perception of odorants during mastication were divided into three distinct phases. Dimethyl sulfide was the main odorant in the first stage. The release and perception of fishy aromas were predominant in the middle and last stages of mastication contributed by trimethylamine, 1-penten-3-ol, and 2-methyl-1-butanol. Chewing behavior experiments suggested that extending the chewing period to >20 s and having a chewing frequency of 2 cycles/s could enhance the aroma delivery of grilled eel and optimize the consumer experience. Consequently, the results explained the relationship between aroma release and the optimal chewing behavior for grilled eel consumption.

Many older adults fail to meet their daily protein requirements, potentially due to social, physical and medical factors, including sensory and appetite changes. Additionally, our previous research has identified potential sulfurous off-flavours, originating from heat-treatment of protein ingredients, which could play a role in consumer acceptance. This study aims to determine the hedonic impact of these potential off-flavours when added to a dairy beverage, identify the specific off-flavour concentrations which cause rejection by consumers, and lastly investigate difference in acceptance between older and younger consumers. A rejection threshold (RjT) protocol was used, in combination with Best Estimate Thresholds (BET), whereby sulfurous flavours (dimethyl sulfide, dimethyl disulfide and dimethyl trisulfide), and diacetyl were added to create a range of concentrations. 95 participants (younger n = 49, 18-38 years; older n = 46, 60-79 years) tasted 7 pairs of samples (one blank and one with ascending off-flavour concentration) and selected their preferred samples. Sulfurous flavours negatively impacted consumer acceptance, however, the extent to which they impart a negative effect differs between age groups. Younger adults rejected samples containing low concentrations of sulfurous off-flavours (1.55 ppb), however, older adults rejected samples with concentrations over 3 times higher (5.08 ppb). When combined with sulfurous flavours, diacetyl increased the rejection threshold for both groups. In conclusion, these observations imply that a greater quantity of off-flavour may be present before acceptance is reduced in the older consumer group. Moreover, diacetyl demonstrates partial masking abilities of sulfurous off-flavours, and BET gave a more conservative estimate of acceptability. This knowledge will help guide sensory innovation of high-protein beverages for older consumers to support product acceptance and optimal intake.

Rapid volatile detection methods for seed vigour rely heavily on artificial ageing (AA), however the comparability of volatile organic compounds (VOCs) to natural ageing (NA) and practicability of the detection models were not well known. In this study, VOCs between AA and NA sweet corn seeds were compared and Partial Least Squares Regression (PLS-R) models were constructed based on AA to predict the seed vigour of NA. A total of 33 VOCs were identified, among which aldehydes showed the highest consistency between NA and AA. Furthermore, a AS-PLS-R model with variable importance in projection (VIP > 1) and Pearson Correlation Coefficient (r > 0.9) algorithms, which was built on 3 volatile markers: benzaldehyde monomer, n-nonanal, 1-butanol monomer, achieved the best performance (R(2)p of 0.901 and RMSEP of 0.050). Therefore, coupling Gas Chromatography- Ion Mobility Spectrometry (GC-IMS) with chemometrics can be an effective way to monitor and predict stored seeds vigour.

Undernutrition is prevalent in the older adult population. Oral nutritional supplements (ONS) are a clinically effective nutritional intervention, however, patient acceptance of ONS can be limited by their palatability. While sensory attributes such as sweetness and mouthfeel have been investigated, the contribution made by aroma to the perceived flavour of ONS has not been studied. Firstly, this research aimed to identify the aroma active compounds within a commonly prescribed ONS using estimated odour activity values (OAV) and gas chromatography olfactometry mass spectrometry (GC-O-MS). Secondly, age related differences in olfactory detection were explored. Eight aroma active compounds were identified within the ONS, including diacetyl (sweet), isoamyl acetate (banana), dimethyl trisulfide (sulfur) and methanethiol (sulfur). When compared with younger adults (n = 24, 18–44 years), older adults (n = 24, 62–80 years) had higher detection thresholds for all aroma compounds and this was significant for isoamyl acetate (sweet, fruity) and methanethiol (sulfur) (p = 0.01 and p = 0.03, respectively). Thus, a decline in olfactory sensitivity was present in the older subjects included in the study, and this reduced detection sensitivity was aroma specific. Thus, older adults’ flavour perception of ONS likely depends on the combined effect of product factors (the aroma profile) along with age related consumer factors (the degree of impairment in perception). This is a fundamental study which will aid future research into how the aroma profile, and associated age related impairments in perception, shape the global perception of ONS for nutritionally at risk older individuals.

Sugar plays an important role in both the flavour and structure of confectionery. Targets have been set to reduce sugar; however, common strategies often result in changes in flavour and consumer rejection. In this study, an approach was developed to reduce sugar in confectionery gels by aeration, without significantly affecting perceived chewiness. Gelatine based gels with a 23% and 38% reduction in density were formulated using aeration. Mean bubble size was consistent across all gels (0.05?0.06 mm). Time-intensity sensory evaluation was carried out by a trained sensory panel (n = 10). With aeration, no significant difference in overall flavour perception was observed in the 23% and 38% reduced sugar and aroma gels. Air inclusions create a greater surface area, therefore accelerating mass transfer of volatiles and release of sucrose at the food-saliva interface. Consequently, we propose that less calorie dense products can be produced without compromising flavour by using gel aeration technologies.

Use of oral nutritional supplements (ONS) in undernourished patients has proven clinical benefits, but this can be hampered by low adherence due to poor experience of palatability. Many patients, particularly older patients, experience hyposalivation which can cause taste changes and reduce the enjoyment of foods. The aim of this study was to investigate differences in the temporal consumption experience (comprising sensory perception, inmouth aroma release and subjective appetite) of a clinically relevant portion of ONS, for groups differing in saliva flow rates (SFR). The SFR (mL/min) of thirty healthy individuals was measured on three occasions. This data was used to categorise individuals into three groups using quartile analysis: low flow (LF) (0.3-0.6 mL/min, n = 5), medium flow (MF) (0.7-1.2 mL/min, n = 16) and high flow (HF) (1.3-1.8 mL/min, n = 9). Over the consumption of eight 15 mL sips of ONS, individuals rated their sensory perception and subjective appetite perception using line scales. Additionally, in-mouth aroma release was measured for each sip, using atmospheric pressure chemical ionisation (APCI). Compared with the MF and HF group, the LF group reported a significantly greater increase of mouth-drying over increased sips (p = 0.02). The LF group also experienced significantly higher aftertaste perception (p < 0.001), and more intense in-mouth aroma release (p = 0.015), compared with the HF group. These findings occurred concurrently with relatively lower hunger sensations in the LF and MF group. Many patients who are prescribed ONS likely experience reduced salivary flow rates. The unique sensory experiences of these individuals should be considered in order to optimise palatability and nutritional intake.

Novel sodium reduction strategies are urgently required by the food industry. We hypothesised that redesigning salt crystals (size, density, hydrophobicity and flow properties) will offer a new route to increase saltiness and therefore reduce sodium. Eight salts were compared with different physicochemical properties, the resultant particles were characterised and adhesion to product, loss in-pack, rate of dissolution and ultimately saltiness perception were evaluated. Principle findings included that particle adhesion was driven by particle size (r = -0.85, p = 0.008), bulk density (r = -0.80, p = 0.017) and flow properties (r = 0.77, p = 0.015); loss in-pack was associated with particle size and hydrophobicity of the salt particle while dissolution and/or saltiness perception was also driven by particle size and hydrophobicity of the salt particle. The findings offer a new set of design rules for future ingredient design for the food and flavour industries.

Fruits are essential components of a healthy diet contributing to the prevention of different diseases. Nevertheless, their consumption is limited among the population for reasons of convenience, among others. High-quality products are obtained by freeze-drying; however, dehydrated fruit presents a physical stability problem associated with the glass transition of its amorphous matrix. A common technique to prevent the rubbery state is the incorporation of biopolymers that contribute to increasing the glass transition temperature or that may exert a steric role. Nevertheless, the chemical composition and physical properties of these biopolymers may affect the quality of the dehydrated product which could compromise its use for specific applications. This work studies the impact of gum Arabic, bamboo fibre, maltodextrin, pea fibre, starch substituted with octenyl succinic groups and native corn starch added to an orange puree, on powder flowability and rehydration behaviour of the freeze-dried fruit powder. As regards the flowability, according to the angle of repose values (37–42°), all powder formulations were considered in the range of ‘acceptable’ powders. However, both samples containing maltodextrin showed significantly the lowest angle of repose value (37–38°), and therefore a better flowability. Samples containing gum Arabic, bamboo fibre and maltodextrin showed the lower wetting time (175–570 s), which is desired for rehydration, compared to those formulated with OSA (914–1887 s). Moreover, sample with gum Arabic showed the lowest viscosity after rehydration (0.199 Pas), desired to be consumed as a juice. According to the obtained results, if to get an orange puree powder with a good flowability is desired, the use of maltodextrin may be recommended. However, if rehydration is preferred, the use of gum Arabic is more recommended.

A pilot scale dealcoholisation unit fitted with reverse osmosis (RO) membranes was used to directly compare two beer matrices (stout, lager, ~ 5% ABV) and their dealcoholized counterparts (~0.5% ABV), for physicochemical properties (volatiles, pH, ABV, polyphenols, bitterness) and sensory profiles using a trained descriptive panel (n = 12). The efficiency and consistency of RO membranes were evaluated by replicate dealcoholisation trials (n = 3) for each beer. Statistical analysis revealed significant reductions (p < 0.05) in key volatile compounds with linear structures (ethyl octanoate, octan-1-ol) compared to those with increased levels of branching (3-methylbutyl acetate, 2-methylpropan-1-ol). Significant reductions (p < 0.0001) in 'fruity/estery', 'alcoholic/solvent', 'malty', 'sweetness' and 'body' sensory attributes were also discovered. Finally, longer processing times for the stout across replicate trials suggested membrane clogging, whilst differences in volatile reduction suggested membrane fouling. This novel research proposes compound structure, rather than compound size, impacts RO membrane permeability and resulting sensory quality.

Salt is included in many foods which consumers do not regard as salty. This “hidden-salt” may offer functional benefits but is often overlooked in sodium reduction strategies. This study investigated its role in shortbread-like sweet biscuits (1.05 g NaCl/100 g). Sensory tests revealed significant flavour and texture differences after a salt reduction of 33% (0.86 g/ 100 g). This was explained by differences in the partitioning of hydrophobic aroma compounds into the headspace and a significant impact on structure. Texture analysis and X-ray-µCT measurements revealed a reduced hardness with larger and more air cells in salt-reduced biscuits. It is suggested that salt impacts on cereal proteins by altering their aggregation around flour particles and at bubble walls and that slower water loss occurs in salted matrices during baking. Hence, this study revealed the key properties significantly affected by salt reduction and proposes an explanation which will help to develop a targeted “hidden-salt” reduction strategy.

Postharvest, pea vine field residue (haulm) was swam-sterilised and then juiced; a chloroplast-rich fraction (CRF) was recovered from the juice by centrifugation. The stability of selected nutrients (beta-carotene, lutein, and alpha-tocopherol) in the freeze-dried CRF material was measured over 84 days; the impact of temperature (-20 degrees C, 4 degrees C, 25 degrees C and 40 degrees C), light and air on nutrient stability was established. All three nutrients were stable at -20 degrees C and 4 degrees C in the presence or absence of air; this stability was lost at higher temperatures in the presence of air. The extent and rate of nutrient breakdown significantly increased when the CRF samples were exposed to light beta-Carotene appeared to be more susceptible to degradation than lutein and alpha-tocopherol at 40 degrees C in the presence of air, but when CRF was exposed to light all three nutrients measured were significantly broken down during storage at 25 degrees C or 40 degrees C, whether exposed to air or not.