Ullmann coupling is a widely used reaction for the on-surface growth of low-dimensional carbon nanomaterials. The irreversible nature of this reaction prevents the "self-healing" of defects, and a detailed knowledge of its mechanism is therefore essential to enable the growth of extended ordered structures. However, the dynamics of the Ullmann polymerization remain largely unexplored, as coupling events occur on a timescale faster than conventional scanning probe microscopy imaging frequencies. Here, we reveal the dynamics of these surface events using high-speed variable-temperature scanning tunneling microscopy (STM) (10 frames per second). Performing the measurements at the onset reaction temperatures provides an unprecedented description of the evolution of organometallic (OM) and covalent surface species during the Ullmann polymerization of para-dibromobenzene on Cu(110). Our results demonstrate the existence of an intermediate OM phase with Cu adatoms that inhibits the polymerization. These observations now complete the picture of the pathways of on-surface Ullmann polymerization, which includes the complex interplay of the phenylene moieties and metal atoms. Our work demonstrates the unique capability of high-speed STM to capture the dynamics of molecular self-assembly and coupling.

Planar and twisted self-assemblies of diketopyrrolopyrrole molecules are determined by aromatic substitutions as revealed by STM at solid–liquid interfaces.

2D materials with high charge carrier mobility and tunable electronic band gaps have attracted intense research effort for their potential use as active components in nanoelectronics. 2D-conjugated polymers (2DCP) constitute a promising sub-class due to the fact that the electronic band structure can be manipulated by varying the molecular building blocks, while at the same time preserving the key features of 2D materials such as Dirac cones and high charge mobility. The major challenge for their use in technological applications is to fabricate mesoscale ordered 2DCP networks since current synthetic routes yield only small domains with a high density of defects. Here we demonstrate the synthesis of a mesoscale ordered 2DCP with semiconducting properties and Dirac cone structures via Ullmann coupling on Au(111). This material has been obtained by combining rigid azatriangulene precursors and a hot dosing approach which favours molecular diffusion and reduces the formation of voids in the network. These results open opportunities for the synthesis of 2DCP Dirac cone materials and their integration into devices.

Two-dimensional conjugated polymers (2DCPs) are an emerging class of materials that exhibit properties similar to graphene yet do not have the limitation of zero bandgap. On-surface synthesis provides exceptional control on the polymerization reaction, allowing tailoring properties by choosing suitable monomers. Heteroatom-substituted triangulene 2DCPs constitute a playing ground for such a design and are predicted to exhibit graphene-like band structures with high charge mobility and characteristic Dirac cones in conduction or valence states. However, measuring these properties experimentally is challenging and requires long-range-ordered polymers, preferably with an epitaxial relationship with the substrate. Here, we investigate the electronic properties of a mesoscale-ordered carbonyl-bridged triphenylamine 2DCP (P2TANGO) and demonstrate the presence of a Dirac cone by combining angle-resolved photoemission spectroscopy (ARPES) with density functional theory (DFT) calculations. Moreover, we measure the absolute energy position of the Dirac cone with respect to the vacuum level. We show that the bridging functionality of the triangulene (ether vs carbonyl) does not significantly perturb the band structure but strongly affects the positioning of the bands with respect to the Au(111) states and allows control of the ionization energy of the polymer. Our results provide proof of the controllable electronic properties of 2DCPs and bring us closer to their use in practical applications.

The precise control of molecular self-assembly on surfaces presents many opportunities for the creation of complex nanostructures. Within this endeavor, selective patterning by exploiting molecular interactions at the solid-liquid interface would be a beneficial capability. Using scanning tunneling microscopy at the 1,2,4-trichlorobenzene/Au(111) interface, we observed selective self-assembly of 1,3,5-tris(4-methoxyphenyl)benzene (TMPB) molecules in the face-centered cubic (FCC) regions of Au(111). Density functional theory calculations suggest higher adsorption energy of TMPB molecules at FCC regions, explaining the preference for self-assembly. The molecular coverage is found to increase with the concentration of the applied solution, eventually yielding a full monolayer. Moreover, the adsorption of TMPB molecules induces a concentration-dependent lifting of the herringbone reconstruction, observed as an increase in the area of the FCC regions at higher concentrations. Our results represent a simple and cost-effective selective nanoscale patterning method on Au(111), providing a possible avenue to guide the co-adsorption of other functional molecules.

Surface-confined reactions represent a powerful approach for the precise synthesis of low-dimensional organic materials. A complete understanding of the pathways of surface reactions would enable the rational synthesis of a wide range of molecules and polymers. Here, we report different reaction pathways of tetrathienylbenzene (T1TB) and its extended congener tetrakis(dithienyl)benzene (T2TB) on Cu(111), investigated using scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory calculations. Both T1TB and T2TB undergo desulfurization when deposited on Cu(111) at room temperature. Deposition of T1TB at 453 K yields pentacene through desulfurization, hydrogen transfer, and a cascade of intramolecular cyclization. In contrast, for T2TB the intramolecular cyclization stops at anthracene and the following intermolecular C-C coupling produces a conjugated ladder polymer. We show that tandem desulfurization/C-C coupling provides a versatile approach for growing carbon-based nanostructures on metal surfaces.

We report the systematic investigation of the effects of oxygen on the synthesis of 3p sub-family armchair graphene nanoribbons (3p-AGNRs), which revealed a strong catalytic effect with a reduction in the reaction temperature by approximately 180 K without degradation of the AGNRs. Poly(para-phenylene) (3-AGNR) was generated through Ullmann-type coupling of 4,4″-dibromo-p-terphenyl on Cu(111), which was then converted into wider 3p-AGNRs via lateral fusion. Scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy demonstrated the formation of different ribbons up to 12-AGNR, which contained regions exhibiting increased STM contrast that we attribute to the intercalation of Br atoms during lateral fusion.

On-surface Ullmann coupling is an established method for the synthesis of 1D and 2D organic structures. A key limitation to obtaining ordered polymers is the uncertainty in the final structure for coupling via random diffusion of reactants over the substrate, which leads to polymorphism and defects. Here, a topotactic polymerization on Cu(110) in a series of differently-halogenated para-phenylenes is identified, where the self-assembled organometallic (OM) reactants of diiodobenzene couple directly into a single, deterministic product, whereas the other precursors follow a diffusion driven reaction. The topotactic mechanism is the result of the structure of the iodine on Cu(110), which controls the orientation of the OM reactants and intermediates to be the same as the final polymer chains. Temperature-programmed X-ray photoelectron spectroscopy and kinetic modeling reflect the differences in the polymerization regimes, and the effects of the OM chain alignments and halogens are disentangled by Nudged Elastic Band calculations. It is found that the repulsion or attraction between chains and halogens drive the polymerization to be either diffusive or topotactic. These results provide detailed insights into on-surface reaction mechanisms and prove the possibility of harnessing topotactic reactions in surface-confined Ullmann polymerization.

Two-dimensional materials with high charge carrier mobility and tunable band gaps have attracted intense research effort for their potential use in nanoelectronics. Two-dimensional π-conjugated polymers constitute a promising subclass because the band structure can be manipulated by varying the molecular building blocks while preserving key features such as Dirac cones and high charge mobility. The major barriers to the application of two-dimensional π-conjugated polymers have been the small domain size and high defect density attained in the syntheses explored so far. Here, we demonstrate the fabrication of mesoscale ordered two-dimensional π-conjugated polymer kagome lattices with semiconducting properties, Dirac cone structures and flat bands on Au(111). This material has been obtained by combining a rigid azatriangulene precursor and a hot dosing approach, which favours molecular diffusion and eliminates voids in the network. These results open opportunities for the synthesis of two-dimensional π-conjugated polymer Dirac cone materials and their integration into devices.

The formation of ordered molecular structures on surfaces is determined by the balance between molecule-molecule and molecule-substrate interactions. Whether the aggregation process is guided by non-covalent forces or on-surface reactions, a deeper understanding of these interactions is pivotal to formulating a priori predictions of the final structural features and the development of bottom-up fabrication protocols. Theoretical models of molecular systems corroborate the information gathered through experimental observations and help explain the thermodynamic factors that underpin on-surface phase transitions. Here, we report a scanning tunneling microscopy investigation of a tribromo-substituted heterotriangulene on the Au(111) surface, which initially forms an extended close-packed ordered structure stabilized by BrBr halogen bonds when deposited at room temperature. X-ray photoelectron spectroscopy reveals that annealing the self-assembled layer induces a fraction of the molecular precursors to partially dehalogenate that in turn leads to the formation of a less stable BrO non-covalent network which coexists with the short oligomers. Density functional theory (DFT) and Monte Carlo (MC) simulations illustrate how dimer moieties act as defects whose steric hindrance prevents the retention of the more stable configuration. A small number of dimers is sufficient to drive the molecular reorganization into a lower cohesive energy phase. Our study shows the importance of a combined DFT - MC approach to understand the evolution of molecular systems on substrates.